From: Valentin Longchamp <valentin.longchamp@keymile.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v1 8/8] mpc85xx: introduce the kmp204x reference design support
Date: Wed, 21 Aug 2013 08:36:24 +0200 [thread overview]
Message-ID: <52145FE8.1050705@keymile.com> (raw)
In-Reply-To: <1377022737.3370.6.camel@snotra.buserror.net>
On 08/20/2013 08:18 PM, Scott Wood wrote:
> On Tue, 2013-08-20 at 08:28 +0200, Valentin Longchamp wrote:
>> On 08/20/2013 02:48 AM, Scott Wood wrote:
>>> On Mon, 2013-08-19 at 17:50 +0200, Valentin Longchamp wrote:
>>>> On 08/13/2013 11:38 PM, Scott Wood wrote:
>>>>> On Fri, 2013-07-26 at 12:02 +0200, Valentin Longchamp wrote:
>>>>>> This patch introduces the support for Keymile's kmp204x reference
>>>>>> design. This design is based on Freescale's P2040/P2041 SoC.
>>>>>>
>>>>>> The peripherals used by this design are:
>>>>>> - DDR3 RAM with SPD support
>>>>>> - SPI NOR Flash as boot medium
>>>>>> - NAND Flash
>>>>>> - 2 PCIe busses (hosts 1 and 3)
>>>>>> - 3 FMAN Ethernet devices (FMAN1 DTSEC1/2/5)
>>>>>> - 3 Local Bus windows, with one dedicated to the QRIO reset/power mgmt
>>>>>> FPGA
>>>>>> - 2 HW I2C busses
>>>>>> - last but not least, the mandatory serial port
>>>>>>
>>>>>> The board/keymile/kmp204x code is mostly based on Freescale's P2041rdb
>>>>>> support and was changed according to our design (that means essentially
>>>>>> removing what is not present on the designs and a few adaptations).
>>>>>
>>>>> A lot of the copied files have had Freescale copyrights removed... Also
>>>>> please try to factor shared code out rather than duplicate, where
>>>>> practical.
>>>>
>>>> Well, I had tried to come a first proposal that factored shared code but I was
>>>> advised to copy the code: [1]. For the copyrights I will fix it.
>>>>
>>>> [1]
>>>>
>>>
>>> Did you mean to cite something here?
>>>
>>
>> Oops, yes sorry:
>> http://u-boot.10912.n7.nabble.com/RFC-PATCH-mpc85xx-move-generic-corenet-to-cpu-mpc85xxx-tt153910.html#none
>>
>
> I think the problem there was that you shared too much, not that sharing
> is bad in general.
>
OK, then could you please tell me more precisely what you would expect to be
shared and not shared ? Because getting 2 contradictory feedbacks confuses me here.
Valentin
next prev parent reply other threads:[~2013-08-21 6:36 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-26 10:02 [U-Boot] [PATCH v1 0/8] Support for the kmp204x reference design Valentin Longchamp
2013-07-26 10:02 ` [U-Boot] [PATCH v1 1/8] km-powerpc: move SYS_MALLOC_LEN out of keymile-common.h Valentin Longchamp
2013-07-26 10:02 ` [U-Boot] [PATCH v1 2/8] km-powerpc: move CONFIG_FLASH_CFI_MTD to km83xx-common.h Valentin Longchamp
2013-07-26 10:02 ` [U-Boot] [PATCH v1 3/8] KM: fix typo in default environment Valentin Longchamp
2013-07-26 10:02 ` [U-Boot] [PATCH v1 4/8] mpc8xxx: set x2 DDR3 refresh rate if SPD config requires it Valentin Longchamp
2013-08-13 20:24 ` [U-Boot] [U-Boot, v1, " York Sun
2013-08-19 15:25 ` Valentin Longchamp
2013-07-26 10:02 ` [U-Boot] [PATCH v1 5/8] fsl: do not define FSL_SRIO_PCIE_BOOT_MASTER for all P2041 systems Valentin Longchamp
2013-08-13 20:32 ` [U-Boot] [U-Boot, v1, " York Sun
2013-08-19 15:26 ` Valentin Longchamp
2013-07-26 10:02 ` [U-Boot] [PATCH v1 6/8] net/fman: add a fm_enable_port function Valentin Longchamp
2013-08-13 20:38 ` [U-Boot] [U-Boot, v1, " York Sun
2013-08-19 15:28 ` Valentin Longchamp
2013-07-26 10:02 ` [U-Boot] [PATCH v1 7/8] mtd/fsl_elbc: take NAND_ECC_SOFT_BCH config option into accout Valentin Longchamp
2013-08-13 20:54 ` Scott Wood
2013-08-19 15:34 ` Valentin Longchamp
2013-07-26 10:02 ` [U-Boot] [PATCH v1 8/8] mpc85xx: introduce the kmp204x reference design support Valentin Longchamp
2013-08-13 21:38 ` Scott Wood
2013-08-19 15:50 ` Valentin Longchamp
2013-08-20 0:48 ` Scott Wood
2013-08-20 1:02 ` York Sun
2013-08-20 18:20 ` Scott Wood
2013-08-20 18:21 ` Scott Wood
2013-08-20 19:40 ` York Sun
2013-08-20 19:47 ` Scott Wood
2013-08-20 19:57 ` York Sun
2013-08-20 20:03 ` Scott Wood
2013-08-20 20:26 ` York Sun
2013-08-20 23:24 ` [U-Boot] [RFC PATCH 1/1] powerpc/embedded6xx: Add support for Motorola/Emerson MVME5100 Scott Wood
2013-08-20 6:28 ` [U-Boot] [PATCH v1 8/8] mpc85xx: introduce the kmp204x reference design support Valentin Longchamp
2013-08-20 18:18 ` Scott Wood
2013-08-21 6:36 ` Valentin Longchamp [this message]
2013-08-21 23:11 ` Scott Wood
2013-08-13 21:44 ` [U-Boot] [U-Boot, v1, " York Sun
2013-08-19 15:51 ` Valentin Longchamp
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52145FE8.1050705@keymile.com \
--to=valentin.longchamp@keymile.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.