All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chris Rodley <chris@snapithd.com>
To: Jerome Oufella <jerome.oufella@savoirfairelinux.com>
Cc: kernel@savoirfairelinux.com, linux-kernel@vger.kernel.org,
	lm-sensors@lm-sensors.org
Subject: Re: [lm-sensors] sht15 kernel driver
Date: Thu, 29 Aug 2013 21:58:10 +0000	[thread overview]
Message-ID: <521FC3F2.5030504@snapithd.com> (raw)
In-Reply-To: <87ppswh75z.fsf@jerows.sfl>

On 30/08/13 03:02, Jerome Oufella wrote:
> Chris Rodley <chris@snapithd.com> writes:
>> Thanks Jerome!
>>
>> That was just what I needed to know.
>> The device is now set up and is working well - I will have a go at
>> back porting now.
>>
>> Many thanks again for your help!
>> Chris
> Good to know Chris!
>
> Note, we noticed that the sht15 driver may be sensible to noisy lines,
> we suspect a race condition around the interrupt handling code.
>
> If your sensor is populated on the board you shouldn't have problems
> though.
>
> Jerome

Hi,

We have it working really well .. not noticing any issues - so far at least.
It is being populated more or less directly on the board - just via a 
daughter board in the prototype phase.
So I might not see the same issues.

If we find anything I will submit it back to you.

Many thanks again for your advice!
Chris

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

WARNING: multiple messages have this Message-ID (diff)
From: Chris Rodley <chris@snapithd.com>
To: Jerome Oufella <jerome.oufella@savoirfairelinux.com>
Cc: kernel@savoirfairelinux.com, linux-kernel@vger.kernel.org,
	lm-sensors@lm-sensors.org
Subject: Re: sht15 kernel driver
Date: Fri, 30 Aug 2013 09:58:10 +1200	[thread overview]
Message-ID: <521FC3F2.5030504@snapithd.com> (raw)
In-Reply-To: <87ppswh75z.fsf@jerows.sfl>

On 30/08/13 03:02, Jerome Oufella wrote:
> Chris Rodley <chris@snapithd.com> writes:
>> Thanks Jerome!
>>
>> That was just what I needed to know.
>> The device is now set up and is working well - I will have a go at
>> back porting now.
>>
>> Many thanks again for your help!
>> Chris
> Good to know Chris!
>
> Note, we noticed that the sht15 driver may be sensible to noisy lines,
> we suspect a race condition around the interrupt handling code.
>
> If your sensor is populated on the board you shouldn't have problems
> though.
>
> Jerome

Hi,

We have it working really well .. not noticing any issues - so far at least.
It is being populated more or less directly on the board - just via a 
daughter board in the prototype phase.
So I might not see the same issues.

If we find anything I will submit it back to you.

Many thanks again for your advice!
Chris

  parent reply	other threads:[~2013-08-29 21:58 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <521E7CA7.5060407@snapithd.com>
2013-08-28 23:08 ` [lm-sensors] sht15 kernel driver Jerome Oufella
2013-08-28 23:08   ` Jerome Oufella
2013-08-29  3:18   ` [lm-sensors] " Chris Rodley
2013-08-29  3:18     ` Chris Rodley
2013-08-29 15:02     ` [lm-sensors] " Jerome Oufella
2013-08-29 15:02       ` Jerome Oufella
2013-08-29 15:28       ` [lm-sensors] " Guenter Roeck
2013-08-29 15:28         ` Guenter Roeck
2013-08-29 21:58       ` Chris Rodley [this message]
2013-08-29 21:58         ` Chris Rodley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=521FC3F2.5030504@snapithd.com \
    --to=chris@snapithd.com \
    --cc=jerome.oufella@savoirfairelinux.com \
    --cc=kernel@savoirfairelinux.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lm-sensors@lm-sensors.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.