From: "Per Dalén" <per.dalen@appeartv.com>
To: Claudiu Manoil <claudiu.manoil@freescale.com>
Cc: netdev@vger.kernel.org
Subject: Re: BQL support in gianfar causes network hiccup
Date: Mon, 02 Sep 2013 18:50:51 +0200 [thread overview]
Message-ID: <5224C1EB.3030307@appeartv.com> (raw)
In-Reply-To: <5224B026.8090803@freescale.com>
On 09/02/2013 05:35 PM, Claudiu Manoil wrote:
> On 9/2/2013 5:37 PM, Per Dalén wrote:
>>> The proposed fix is currently under review:
>>> http://patchwork.ozlabs.org/patch/271242/
>>> "gianfar: Fix reported number of sent bytes to BQL"
>>>
>>> Does this one work for you? You might need to pull
>>> one recent gianfar clean-up patch from net-next in order
>>> to apply this one without incidents.
>>>
>>
>> No, still the same error:
>>
>> NETDEV WATCHDOG: eth0 (fsl-gianfar): transmit queue 0 timed out
>> ------------[ cut here ]------------
>> WARNING: at net/sched/sch_generic.c:256
>> Modules linked in:
>> NIP: c039ce0c LR: c039ce0c CTR: c02ef578
>> ...
>> 4e800421 80fe0244 4bffff40 7fc3f378 4bfea9d1 7fc4f378 7c651b78 3c60c055
>> 7fe6fb78 38635304 4cc63182 480fcddd <0fe00000> 39200001 993c0a3c 4bffffb4
>> ---[ end trace 5f5e1e3c30024010 ]---
>>
>>
>
> Tried to reproduce the issue with a recent net-next kernel (Linux
> p2020rdb 3.11.0-rc6) + BQL fix patch (http://patchwork.ozlabs.org/patc
> /271242/), but the iperf test finished without incidents (see log
> below).
> Will try if the problem is apparent without the fix patch, on the same
> net-next kernel (3.11.0-rc6).
>
I was able to reproduce it on our card and the P2020RDB using 3.11.0-rc7
+ David Miller's -next networking tree and your patch
(http://patchwork.ozlabs.org/patch/271242/).
root@p2020rdb:~# iperf -s
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 85.3 KByte (default)
------------------------------------------------------------
[ 4] local 10.10.51.36 port 5001 connected with 10.10.49.116 port 35530
[ 5] local 10.10.51.36 port 5001 connected with 10.10.49.116 port 35531
[ 6] local 10.10.51.36 port 5001 connected with 10.10.49.116 port 35532
...
[ 51] local 10.10.51.36 port 5001 connected with 10.10.49.116 port 35578
[ 52] local 10.10.51.36 port 5001 connected with 10.10.49.116 port 35576
[ 53] local 10.10.51.36 port 5001 connected with 10.10.49.116 port 35579
NETDEV WATCHDOG: eth2 (fsl-gianfar): transmit queue 0 timed out
------------[ cut here ]------------
WARNING: at net/sched/sch_generic.c:264
Modules linked in:
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.11.0-rc7+ #19
task: ef84f340 ti: ef86a000 task.ti: ef86a000
NIP: c03e9a88 LR: c03e9a88 CTR: c031658c
REGS: ef86bcd0 TRAP: 0700 Not tainted (3.11.0-rc7+)
MSR: 00029000 <CE,EE,ME> CR: 22000044 XER: 20000000
GPR00: c03e9a88 ef86bd80 ef84f340 0000003f c0e9e3fc c0e9e9d0 c0316d40
00021000
GPR08: 00000007 00000800 00000000 000000ee 000000ee 00000000 00000101
00000004
GPR16: 00000001 00200040 ffff00ee c0657040 00000000 ef880e18 ef880c18
ffffffff
GPR24: 00000001 ef98c1f4 00000004 efaf31c0 c0650000 c0650000 ef98c000
00000000
NIP [c03e9a88] dev_watchdog+0x2d4/0x2e4
LR [c03e9a88] dev_watchdog+0x2d4/0x2e4
Call Trace:
[ef86bd80] [c03e9a88] dev_watchdog+0x2d4/0x2e4 (unreliable)
[ef86bdb0] [c0042cf8] call_timer_fn.isra.25+0x28/0x84
[ef86bdd0] [c0042ee4] run_timer_softirq+0x190/0x208
[ef86be20] [c003b1b8] __do_softirq+0xf4/0x1bc
[ef86be70] [c003b430] irq_exit+0xbc/0xc8
[ef86be80] [c0009490] timer_interrupt+0x1b4/0x1ec
[ef86beb0] [c000ead0] ret_from_except+0x0/0x18
--- Exception: 901 at arch_cpu_idle+0x24/0x5c
LR = arch_cpu_idle+0x24/0x5c
[ef86bf70] [c009bd9c] rcu_idle_enter+0xa4/0xe4 (unreliable)
[ef86bf80] [c007744c] cpu_startup_entry+0xc4/0x15c
[ef86bfb0] [c000fdd8] start_secondary+0x2f0/0x310
[ef86bff0] [c0001ff8] __secondary_start+0x30/0x84
Instruction dump:
4e800421 80fe0208 4bffff40 7fc3f378 4bfe7409 7fc4f378 7c651b78 3c60c05c
7fe6fb78 3863e0b4 4cc63182 4810da7d <0fe00000> 39200001 993c1341 4bffffb4
---[ end trace 9e08f5e256de5040 ]---
root@p2020rdb:~# ifconfig eth2
eth2 Link encap:Ethernet HWaddr 00:11:22:33:44:aa
inet addr:10.10.51.36 Bcast:10.10.51.255 Mask:255.255.252.0
inet6 addr: fe80::211:22ff:fe33:44aa/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:336843 errors:0 dropped:0 overruns:0 frame:0
TX packets:209019 errors:126 dropped:0 overruns:0 carrier:125
collisions:0 txqueuelen:1000
RX bytes:505655782 (482.2 MiB) TX bytes:15060182 (14.3 MiB)
Base address:0xc000
root@p2020rdb:~# ethtool eth2
Settings for eth2:
Supported ports: [ MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Half
Port: MII
PHYAD: 1
Transceiver: external
Auto-negotiation: on
Supports Wake-on: g
Wake-on: d
Current message level: 0x0000003f (63)
drv probe link timer ifdown ifup
Link detected: yes
root@p2020rdb:~# dmesg
...
NETDEV WATCHDOG: eth2 (fsl-gianfar): transmit queue 0 timed out
------------[ cut here ]------------
WARNING: at net/sched/sch_generic.c:264
Modules linked in:
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.11.0-rc7+ #19
task: ef84f340 ti: ef86a000 task.ti: ef86a000
NIP: c03e9a88 LR: c03e9a88 CTR: c031658c
REGS: ef86bcd0 TRAP: 0700 Not tainted (3.11.0-rc7+)
MSR: 00029000 <CE,EE,ME> CR: 22000044 XER: 20000000
GPR00: c03e9a88 ef86bd80 ef84f340 0000003f c0e9e3fc c0e9e9d0 c0316d40
00021000
GPR08: 00000007 00000800 00000000 000000ee 000000ee 00000000 00000101
00000004
GPR16: 00000001 00200040 ffff00ee c0657040 00000000 ef880e18 ef880c18
ffffffff
GPR24: 00000001 ef98c1f4 00000004 efaf31c0 c0650000 c0650000 ef98c000
00000000
NIP [c03e9a88] dev_watchdog+0x2d4/0x2e4
LR [c03e9a88] dev_watchdog+0x2d4/0x2e4
Call Trace:
[ef86bd80] [c03e9a88] dev_watchdog+0x2d4/0x2e4 (unreliable)
[ef86bdb0] [c0042cf8] call_timer_fn.isra.25+0x28/0x84
[ef86bdd0] [c0042ee4] run_timer_softirq+0x190/0x208
[ef86be20] [c003b1b8] __do_softirq+0xf4/0x1bc
[ef86be70] [c003b430] irq_exit+0xbc/0xc8
[ef86be80] [c0009490] timer_interrupt+0x1b4/0x1ec
[ef86beb0] [c000ead0] ret_from_except+0x0/0x18
--- Exception: 901 at arch_cpu_idle+0x24/0x5c
LR = arch_cpu_idle+0x24/0x5c
[ef86bf70] [c009bd9c] rcu_idle_enter+0xa4/0xe4 (unreliable)
[ef86bf80] [c007744c] cpu_startup_entry+0xc4/0x15c
[ef86bfb0] [c000fdd8] start_secondary+0x2f0/0x310
[ef86bff0] [c0001ff8] __secondary_start+0x30/0x84
Instruction dump:
4e800421 80fe0208 4bffff40 7fc3f378 4bfe7409 7fc4f378 7c651b78 3c60c05c
7fe6fb78 3863e0b4 4cc63182 4810da7d <0fe00000> 39200001 993c1341 4bffffb4
---[ end trace 9e08f5e256de5040 ]---
Thanks,
Per
> Claudiu
> --
> root@p2020rdb:~# ifconfig eth2
> eth2 Link encap:Ethernet HWaddr 00:04:9f:01:1e:64
> inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0
> inet6 addr: fe80::204:9fff:fe01:1e64/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:1744045 errors:0 dropped:0 overruns:0 frame:0
> TX packets:7242116 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:143012380 (136.3 MiB) TX bytes:2373808232 (2.2 GiB)
> Base address:0x6000
>
> root@p2020rdb:~# ethtool eth2
> Settings for eth2:
> Supported ports: [ MII ]
> Supported link modes: 10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> 1000baseT/Full
> Supports auto-negotiation: Yes
> Advertised link modes: 10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> 1000baseT/Full
> Advertised pause frame use: No
> Advertised auto-negotiation: No
> Speed: 100Mb/s
> Duplex: Half
> Port: MII
> PHYAD: 1
> Transceiver: external
> Auto-negotiation: off
> Supports Wake-on: g
> Wake-on: d
> Current message level: 0x0000003f (63)
> drv probe link timer ifdown ifup
> Link detected: yes
> root@p2020rdb:~# time iperf -c 192.168.1.4 -n 100M -P 50
> ------------------------------------------------------------
> Client connecting to 192.168.1.4, TCP port 5001
> TCP window size: 20.7 KByte (default)
> ------------------------------------------------------------
> [ 52] local 192.168.1.100 port 54653 connected with 192.168.1.4 port 5001
> [ 3] local 192.168.1.100 port 54604 connected with 192.168.1.4 port 5001
> [ 4] local 192.168.1.100 port 54605 connected with 192.168.1.4 port 5001
> [ 7] local 192.168.1.100 port 54608 connected with 192.168.1.4 port 5001
> [ 5] local 192.168.1.100 port 54606 connected with 192.168.1.4 port 5001
> [ 8] local 192.168.1.100 port 54609 connected with 192.168.1.4 port 5001
> [ 10] local 192.168.1.100 port 54610 connected with 192.168.1.4 port 5001
> [ 11] local 192.168.1.100 port 54611 connected with 192.168.1.4 port 5001
> [ 9] local 192.168.1.100 port 54612 connected with 192.168.1.4 port 5001
> [ 13] local 192.168.1.100 port 54614 connected with 192.168.1.4 port 5001
> [ 12] local 192.168.1.100 port 54613 connected with 192.168.1.4 port 5001
> [ 14] local 192.168.1.100 port 54615 connected with 192.168.1.4 port 5001
> [ 15] local 192.168.1.100 port 54616 connected with 192.168.1.4 port 5001
> [ 16] local 192.168.1.100 port 54617 connected with 192.168.1.4 port 5001
> [ 17] local 192.168.1.100 port 54618 connected with 192.168.1.4 port 5001
> [ 18] local 192.168.1.100 port 54619 connected with 192.168.1.4 port 5001
> [ 20] local 192.168.1.100 port 54621 connected with 192.168.1.4 port 5001
> [ 19] local 192.168.1.100 port 54620 connected with 192.168.1.4 port 5001
> [ 6] local 192.168.1.100 port 54607 connected with 192.168.1.4 port 5001
> [ 22] local 192.168.1.100 port 54623 connected with 192.168.1.4 port 5001
> [ 21] local 192.168.1.100 port 54622 connected with 192.168.1.4 port 5001
> [ 24] local 192.168.1.100 port 54624 connected with 192.168.1.4 port 5001
> [ 26] local 192.168.1.100 port 54626 connected with 192.168.1.4 port 5001
> [ 28] local 192.168.1.100 port 54628 connected with 192.168.1.4 port 5001
> [ 25] local 192.168.1.100 port 54625 connected with 192.168.1.4 port 5001
> [ 30] local 192.168.1.100 port 54631 connected with 192.168.1.4 port 5001
> [ 27] local 192.168.1.100 port 54627 connected with 192.168.1.4 port 5001
> [ 23] local 192.168.1.100 port 54629 connected with 192.168.1.4 port 5001
> [ 31] local 192.168.1.100 port 54632 connected with 192.168.1.4 port 5001
> [ 32] local 192.168.1.100 port 54633 connected with 192.168.1.4 port 5001
> [ 33] local 192.168.1.100 port 54634 connected with 192.168.1.4 port 5001
> [ 35] local 192.168.1.100 port 54636 connected with 192.168.1.4 port 5001
> [ 34] local 192.168.1.100 port 54635 connected with 192.168.1.4 port 5001
> [ 36] local 192.168.1.100 port 54637 connected with 192.168.1.4 port 5001
> [ 29] local 192.168.1.100 port 54630 connected with 192.168.1.4 port 5001
> [ 40] local 192.168.1.100 port 54640 connected with 192.168.1.4 port 5001
> [ 38] local 192.168.1.100 port 54639 connected with 192.168.1.4 port 5001
> [ 37] local 192.168.1.100 port 54638 connected with 192.168.1.4 port 5001
> [ 39] local 192.168.1.100 port 54642 connected with 192.168.1.4 port 5001
> [ 41] local 192.168.1.100 port 54641 connected with 192.168.1.4 port 5001
> [ 42] local 192.168.1.100 port 54643 connected with 192.168.1.4 port 5001
> [ 43] local 192.168.1.100 port 54644 connected with 192.168.1.4 port 5001
> [ 45] local 192.168.1.100 port 54645 connected with 192.168.1.4 port 5001
> [ 44] local 192.168.1.100 port 54648 connected with 192.168.1.4 port 5001
> [ 46] local 192.168.1.100 port 54646 connected with 192.168.1.4 port 5001
> [ 47] local 192.168.1.100 port 54647 connected with 192.168.1.4 port 5001
> [ 48] local 192.168.1.100 port 54649 connected with 192.168.1.4 port 5001
> [ 49] local 192.168.1.100 port 54650 connected with 192.168.1.4 port 5001
> [ 50] local 192.168.1.100 port 54651 connected with 192.168.1.4 port 5001
> [ 51] local 192.168.1.100 port 54652 connected with 192.168.1.4 port 5001
> [ ID] Interval Transfer Bandwidth
> [ 27] 0.0-337.3 sec 100 MBytes 2.49 Mbits/sec
> [ 28] 0.0-340.6 sec 100 MBytes 2.46 Mbits/sec
> [ 51] 0.0-383.1 sec 100 MBytes 2.19 Mbits/sec
> [ 47] 0.0-384.5 sec 100 MBytes 2.18 Mbits/sec
> [ 11] 0.0-386.1 sec 100 MBytes 2.17 Mbits/sec
> [ 24] 0.0-388.4 sec 100 MBytes 2.16 Mbits/sec
> [ 38] 0.0-397.5 sec 100 MBytes 2.11 Mbits/sec
> [ 32] 0.0-402.9 sec 100 MBytes 2.08 Mbits/sec
> [ 39] 0.0-412.0 sec 100 MBytes 2.04 Mbits/sec
> [ 6] 0.0-414.5 sec 100 MBytes 2.02 Mbits/sec
> [ 50] 0.0-416.3 sec 100 MBytes 2.02 Mbits/sec
> [ 31] 0.0-421.3 sec 100 MBytes 1.99 Mbits/sec
> [ 25] 0.0-424.8 sec 100 MBytes 1.97 Mbits/sec
> [ 17] 0.0-426.4 sec 100 MBytes 1.97 Mbits/sec
> [ 52] 0.0-427.7 sec 100 MBytes 1.96 Mbits/sec
> [ 20] 0.0-436.2 sec 100 MBytes 1.92 Mbits/sec
> [ 29] 0.0-437.5 sec 100 MBytes 1.92 Mbits/sec
> [ 33] 0.0-438.6 sec 100 MBytes 1.91 Mbits/sec
> [ 37] 0.0-438.6 sec 100 MBytes 1.91 Mbits/sec
> [ 40] 0.0-438.7 sec 100 MBytes 1.91 Mbits/sec
> [ 14] 0.0-440.1 sec 100 MBytes 1.91 Mbits/sec
> [ 15] 0.0-441.5 sec 100 MBytes 1.90 Mbits/sec
> [ 22] 0.0-441.7 sec 100 MBytes 1.90 Mbits/sec
> [ 35] 0.0-442.7 sec 100 MBytes 1.89 Mbits/sec
> [ 48] 0.0-443.2 sec 100 MBytes 1.89 Mbits/sec
> [ 26] 0.0-444.8 sec 100 MBytes 1.89 Mbits/sec
> [ 16] 0.0-447.0 sec 100 MBytes 1.88 Mbits/sec
> [ 49] 0.0-447.6 sec 100 MBytes 1.87 Mbits/sec
> [ 12] 0.0-449.5 sec 100 MBytes 1.87 Mbits/sec
> [ 10] 0.0-450.3 sec 100 MBytes 1.86 Mbits/sec
> [ 46] 0.0-451.0 sec 100 MBytes 1.86 Mbits/sec
> [ 18] 0.0-452.9 sec 100 MBytes 1.85 Mbits/sec
> [ 19] 0.0-454.2 sec 100 MBytes 1.85 Mbits/sec
> [ 30] 0.0-454.5 sec 100 MBytes 1.85 Mbits/sec
> [ 21] 0.0-456.2 sec 100 MBytes 1.84 Mbits/sec
> [ 7] 0.0-456.4 sec 100 MBytes 1.84 Mbits/sec
> [ 44] 0.0-456.9 sec 100 MBytes 1.84 Mbits/sec
> [ 42] 0.0-458.9 sec 100 MBytes 1.83 Mbits/sec
> [ 45] 0.0-458.9 sec 100 MBytes 1.83 Mbits/sec
> [ 4] 0.0-459.3 sec 100 MBytes 1.83 Mbits/sec
> [ 3] 0.0-461.5 sec 100 MBytes 1.82 Mbits/sec
> [ 36] 0.0-462.2 sec 100 MBytes 1.81 Mbits/sec
> [ 13] 0.0-462.7 sec 100 MBytes 1.81 Mbits/sec
> [ 34] 0.0-463.0 sec 100 MBytes 1.81 Mbits/sec
> [ 43] 0.0-463.1 sec 100 MBytes 1.81 Mbits/sec
> [ 9] 0.0-463.5 sec 100 MBytes 1.81 Mbits/sec
> [ 8] 0.0-463.9 sec 100 MBytes 1.81 Mbits/sec
> [ 5] 0.0-464.2 sec 100 MBytes 1.81 Mbits/sec
> [ 41] 0.0-465.1 sec 100 MBytes 1.80 Mbits/sec
> [ 23] 0.0-465.3 sec 100 MBytes 1.80 Mbits/sec
> [SUM] 0.0-465.3 sec 4.88 GBytes 90.2 Mbits/sec
>
> real 7m45.296s
> user 0m0.780s
> sys 0m9.636s
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-09-02 16:51 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-02 13:21 BQL support in gianfar causes network hiccup Per Dalén
2013-09-02 13:53 ` Claudiu Manoil
2013-09-02 14:37 ` Per Dalén
2013-09-02 15:35 ` Claudiu Manoil
2013-09-02 16:50 ` Per Dalén [this message]
2013-09-03 7:06 ` Claudiu Manoil
2013-09-03 7:55 ` Per Dalén
2013-09-03 15:42 ` Eric Dumazet
2013-09-03 16:09 ` Claudiu Manoil
2013-09-03 19:33 ` Per Dalén
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5224C1EB.3030307@appeartv.com \
--to=per.dalen@appeartv.com \
--cc=claudiu.manoil@freescale.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.