From: Joe Jin <joe.jin@oracle.com>
To: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
linux-scsi@vger.kernel.org
Subject: [PATCH] [scsi] enclosure: remove all possible sysfs entries before add device
Date: Mon, 09 Sep 2013 14:19:09 +0800 [thread overview]
Message-ID: <522D685D.5060201@oracle.com> (raw)
When do disk pull/insert test we encountered below:
WARNING: at fs/sysfs/dir.c:455 sysfs_add_one+0xbc/0xe0()
Hardware name: SUN FIRE X4370 M2 SERVER
sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:03.0/0000:0d:00.0/host6/port-6:1/expander-6:1/port-6:1:14/end_device-6:1:14/target6:0:27/6:0:27:0/enclosure_device:HDD10'
Modules linked in: oracleacfs(P)(U) oracleadvm(P)(U) oracleoks(P)(U) mptctl mptbase autofs4 hidp bluetooth rfkill lockd sunrpc bonding be2iscsi iscsi_boot_sysfs ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp bnx2i cnic uio ipv6 cxgb3i libcxgbi cxgb3 mdio libiscsi_tcp libiscsi scsi_transport_iscsi dm_round_robin dm_multipath video sbs sbshc acpi_pad acpi_memhotplug acpi_ipmi parport_pc lp parport ipmi_si ipmi_devintf ipmi_msghandler sg ses enclosure ixgbe e1000e hwmon igb snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc iTCO_wdt pcspkr i2c_i801 ioatdma ghes iTCO_vendor_support hed dca i2c_core i7core_edac edac_core dm_snapshot dm_zero dm_mirror dm_region_hash dm_log dm_mod usb_sto
rage shpchp mpt2sas scsi_transport_sas raid_class ahci libahci sd_mod crc_t10dif raid1 ext3 jbd mbcache
Pid: 23302, comm: kworker/u:2 Tainted: P 2.6.39-400.124.1.el5uek #1
Call Trace:
[<ffffffff811daf8c>] ? sysfs_add_one+0xbc/0xe0
[<ffffffff8106f030>] warn_slowpath_common+0x90/0xc0
[<ffffffff8106f15e>] warn_slowpath_fmt+0x6e/0x70
[<ffffffff81258bd4>] ? strlcat+0x54/0x70
[<ffffffff811daf8c>] sysfs_add_one+0xbc/0xe0
[<ffffffff811dbec8>] sysfs_do_create_link+0x148/0x1d0
[<ffffffff811dbf83>] sysfs_create_link+0x13/0x20
[<ffffffffa00de307>] enclosure_add_links+0xe7/0x110 [enclosure]
[<ffffffff8125325d>] ? kobject_release+0xd/0x10
[<ffffffff812549e7>] ? kref_put+0x37/0x70
[<ffffffffa00de3c3>] enclosure_add_device+0x93/0xa0 [enclosure]
[<ffffffffa00c8666>] ses_enclosure_find_by_addr+0x76/0xc0 [ses]
[<ffffffffa00c85f0>] ? ses_get_fault+0x40/0x40 [ses]
[<ffffffffa00de433>] enclosure_for_each_device+0x63/0x90 [enclosure]
[<ffffffffa00c8a8a>] ses_match_to_enclosure+0x11a/0x1d0 [ses]
[<ffffffffa00c8e08>] ses_intf_add+0x2c8/0x5c0 [ses]
[<ffffffff8125327a>] ? kobject_get+0x1a/0x30
[<ffffffff814e8b56>] ? add_tail+0x36/0x50
[<ffffffff81345ae4>] device_add+0x2d4/0x380
[<ffffffff8136b096>] scsi_sysfs_add_sdev+0xe6/0x2a0
[<ffffffff813682cc>] scsi_add_lun+0x41c/0x560
[<ffffffff81368a80>] scsi_probe_and_add_lun+0x1e0/0x3e0
[<ffffffff81041009>] ? default_spin_lock_flags+0x9/0x10
[<ffffffff813696e7>] __scsi_scan_target+0xe7/0x120
[<ffffffff81369b8d>] scsi_scan_target+0xcd/0xf0
[<ffffffffa003faab>] sas_rphy_add+0x11b/0x170 [scsi_transport_sas]
[<ffffffffa009a74f>] mpt2sas_transport_port_add+0x2cf/0x430 [mpt2sas]
[<ffffffffa008d437>] _scsih_sas_device_add+0x87/0x110 [mpt2sas]
[<ffffffffa0094eb8>] _scsih_add_device+0x248/0x340 [mpt2sas]
[<ffffffffa0098cb1>] ? mpt2sas_transport_update_links+0xf1/0x190 [mpt2sas]
[<ffffffffa00977b6>] _scsih_sas_topology_change_event+0x3c6/0x490 [mpt2sas]
[<ffffffff81080698>] ? add_timer+0x18/0x20
[<ffffffff8108a405>] ? queue_delayed_work_on+0xc5/0x170
[<ffffffffa0097a85>] _mpt2sas_fw_work+0x205/0x240 [mpt2sas]
[<ffffffffa0097ad9>] _firmware_event_work_delayed+0x19/0x20 [mpt2sas]
[<ffffffff8108c0d9>] process_one_work+0xf9/0x370
[<ffffffffa0097ac0>] ? _mpt2sas_fw_work+0x240/0x240 [mpt2sas]
[<ffffffff8108ca1a>] worker_thread+0xca/0x240
[<ffffffff8108c950>] ? manage_workers+0x90/0x90
[<ffffffff81090ff7>] kthread+0x97/0xa0
[<ffffffff8150fdc4>] kernel_thread_helper+0x4/0x10
[<ffffffff81090f60>] ? kthread_bind+0x80/0x80
[<ffffffff8150fdc0>] ? gs_change+0x13/0x13
---[ end trace 89a1351702ab360f ]---
During our test, multipath used, each LUN has 2 paths. when adding second
path enclousure did not check if will adding device's symlink existed or no.
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Joe Jin <joe.jin@oracle.com>
---
drivers/misc/enclosure.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/misc/enclosure.c b/drivers/misc/enclosure.c
index 0e8df41..efc0e86 100644
--- a/drivers/misc/enclosure.c
+++ b/drivers/misc/enclosure.c
@@ -325,6 +325,13 @@ int enclosure_add_device(struct enclosure_device *edev, int component,
if (cdev->dev)
enclosure_remove_links(cdev);
+ if (dev) {
+ char name[ENCLOSURE_NAME_SIZE];
+
+ enclosure_link_name(cdev, name);
+ sysfs_remove_link(&dev->kobj, name);
+ }
+
put_device(cdev->dev);
cdev->dev = get_device(dev);
return enclosure_add_links(cdev);
--
1.8.3.1
WARNING: multiple messages have this Message-ID (diff)
From: Joe Jin <joe.jin@oracle.com>
To: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
linux-scsi@vger.kernel.org
Subject: [PATCH] [scsi] enclosure: remove all possible sysfs entries before add device
Date: Mon, 09 Sep 2013 14:19:09 +0800 [thread overview]
Message-ID: <522D685D.5060201@oracle.com> (raw)
When do disk pull/insert test we encountered below:
WARNING: at fs/sysfs/dir.c:455 sysfs_add_one+0xbc/0xe0()
Hardware name: SUN FIRE X4370 M2 SERVER
sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:03.0/0000:0d:00.0/host6/port-6:1/expander-6:1/port-6:1:14/end_device-6:1:14/target6:0:27/6:0:27:0/enclosure_device:HDD10'
Modules linked in: oracleacfs(P)(U) oracleadvm(P)(U) oracleoks(P)(U) mptctl mptbase autofs4 hidp bluetooth rfkill lockd sunrpc bonding be2iscsi iscsi_boot_sysfs ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp bnx2i cnic uio ipv6 cxgb3i libcxgbi cxgb3 mdio libiscsi_tcp libiscsi scsi_transport_iscsi dm_round_robin dm_multipath video sbs sbshc acpi_pad acpi_memhotplug acpi_ipmi parport_pc lp parport ipmi_si ipmi_devintf ipmi_msghandler sg ses enclosure ixgbe e1000e hwmon igb snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc iTCO_wdt pcspkr i2c_i801 ioatdma ghes iTCO_vendor_support hed dca i2c_core i7core_edac edac_core dm_snapshot dm_zero dm_mirror dm_region_hash dm_log dm_mod usb_storage shpchp mpt2sas scsi_transport_sas raid_class ahci libahci sd_mod crc_t10dif raid1 ext3 jbd mbcache
Pid: 23302, comm: kworker/u:2 Tainted: P 2.6.39-400.124.1.el5uek #1
Call Trace:
[<ffffffff811daf8c>] ? sysfs_add_one+0xbc/0xe0
[<ffffffff8106f030>] warn_slowpath_common+0x90/0xc0
[<ffffffff8106f15e>] warn_slowpath_fmt+0x6e/0x70
[<ffffffff81258bd4>] ? strlcat+0x54/0x70
[<ffffffff811daf8c>] sysfs_add_one+0xbc/0xe0
[<ffffffff811dbec8>] sysfs_do_create_link+0x148/0x1d0
[<ffffffff811dbf83>] sysfs_create_link+0x13/0x20
[<ffffffffa00de307>] enclosure_add_links+0xe7/0x110 [enclosure]
[<ffffffff8125325d>] ? kobject_release+0xd/0x10
[<ffffffff812549e7>] ? kref_put+0x37/0x70
[<ffffffffa00de3c3>] enclosure_add_device+0x93/0xa0 [enclosure]
[<ffffffffa00c8666>] ses_enclosure_find_by_addr+0x76/0xc0 [ses]
[<ffffffffa00c85f0>] ? ses_get_fault+0x40/0x40 [ses]
[<ffffffffa00de433>] enclosure_for_each_device+0x63/0x90 [enclosure]
[<ffffffffa00c8a8a>] ses_match_to_enclosure+0x11a/0x1d0 [ses]
[<ffffffffa00c8e08>] ses_intf_add+0x2c8/0x5c0 [ses]
[<ffffffff8125327a>] ? kobject_get+0x1a/0x30
[<ffffffff814e8b56>] ? add_tail+0x36/0x50
[<ffffffff81345ae4>] device_add+0x2d4/0x380
[<ffffffff8136b096>] scsi_sysfs_add_sdev+0xe6/0x2a0
[<ffffffff813682cc>] scsi_add_lun+0x41c/0x560
[<ffffffff81368a80>] scsi_probe_and_add_lun+0x1e0/0x3e0
[<ffffffff81041009>] ? default_spin_lock_flags+0x9/0x10
[<ffffffff813696e7>] __scsi_scan_target+0xe7/0x120
[<ffffffff81369b8d>] scsi_scan_target+0xcd/0xf0
[<ffffffffa003faab>] sas_rphy_add+0x11b/0x170 [scsi_transport_sas]
[<ffffffffa009a74f>] mpt2sas_transport_port_add+0x2cf/0x430 [mpt2sas]
[<ffffffffa008d437>] _scsih_sas_device_add+0x87/0x110 [mpt2sas]
[<ffffffffa0094eb8>] _scsih_add_device+0x248/0x340 [mpt2sas]
[<ffffffffa0098cb1>] ? mpt2sas_transport_update_links+0xf1/0x190 [mpt2sas]
[<ffffffffa00977b6>] _scsih_sas_topology_change_event+0x3c6/0x490 [mpt2sas]
[<ffffffff81080698>] ? add_timer+0x18/0x20
[<ffffffff8108a405>] ? queue_delayed_work_on+0xc5/0x170
[<ffffffffa0097a85>] _mpt2sas_fw_work+0x205/0x240 [mpt2sas]
[<ffffffffa0097ad9>] _firmware_event_work_delayed+0x19/0x20 [mpt2sas]
[<ffffffff8108c0d9>] process_one_work+0xf9/0x370
[<ffffffffa0097ac0>] ? _mpt2sas_fw_work+0x240/0x240 [mpt2sas]
[<ffffffff8108ca1a>] worker_thread+0xca/0x240
[<ffffffff8108c950>] ? manage_workers+0x90/0x90
[<ffffffff81090ff7>] kthread+0x97/0xa0
[<ffffffff8150fdc4>] kernel_thread_helper+0x4/0x10
[<ffffffff81090f60>] ? kthread_bind+0x80/0x80
[<ffffffff8150fdc0>] ? gs_change+0x13/0x13
---[ end trace 89a1351702ab360f ]---
During our test, multipath used, each LUN has 2 paths. when adding second
path enclousure did not check if will adding device's symlink existed or no.
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Joe Jin <joe.jin@oracle.com>
---
drivers/misc/enclosure.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/misc/enclosure.c b/drivers/misc/enclosure.c
index 0e8df41..efc0e86 100644
--- a/drivers/misc/enclosure.c
+++ b/drivers/misc/enclosure.c
@@ -325,6 +325,13 @@ int enclosure_add_device(struct enclosure_device *edev, int component,
if (cdev->dev)
enclosure_remove_links(cdev);
+ if (dev) {
+ char name[ENCLOSURE_NAME_SIZE];
+
+ enclosure_link_name(cdev, name);
+ sysfs_remove_link(&dev->kobj, name);
+ }
+
put_device(cdev->dev);
cdev->dev = get_device(dev);
return enclosure_add_links(cdev);
--
1.8.3.1
next reply other threads:[~2013-09-09 6:19 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-09 6:19 Joe Jin [this message]
2013-09-09 6:19 ` [PATCH] [scsi] enclosure: remove all possible sysfs entries before add device Joe Jin
2013-09-09 13:41 ` Christoph Hellwig
2013-09-10 1:50 ` Joe Jin
2013-09-10 13:39 ` James Bottomley
2013-09-09 14:49 ` Brian King
2013-09-09 14:49 ` Brian King
2013-09-10 12:46 ` James Bottomley
2013-09-10 12:46 ` James Bottomley
2013-09-11 8:26 ` Joe Jin
2013-09-11 8:26 ` Joe Jin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=522D685D.5060201@oracle.com \
--to=joe.jin@oracle.com \
--cc=James.Bottomley@HansenPartnership.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.