* [PATCH 2/2] cpufreq: tegra: Re-model Tegra cpufreq driver
@ 2013-09-11 11:19 ` Bill Huang
0 siblings, 0 replies; 20+ messages in thread
From: Bill Huang @ 2013-09-11 11:19 UTC (permalink / raw)
To: rjw, viresh.kumar, swarren
Cc: linux, linux-arm-kernel, linux-tegra, linux-kernel, cpufreq,
linux-pm, Bill Huang
Re-model Tegra cpufreq driver to support all Tegra series of SoCs.
* Make tegra-cpufreq.c a generic Tegra cpufreq driver.
* Move Tegra20 specific codes into tegra20-cpufreq.c.
* Bind Tegra cpufreq dirver with a fake device so defer probe would work
when we're going to get regulator in the driver to support voltage
scaling (DVFS).
* Call tegra_cpufreq_init() in Tegra machine code specifically so it
won't be called in multi-platform kernel which is not running on Tegra
SoCs.
Signed-off-by: Bill Huang <bilhuang@nvidia.com>
---
arch/arm/mach-tegra/common.c | 2 +
drivers/cpufreq/Kconfig.arm | 16 +++-
drivers/cpufreq/Makefile | 1 +
drivers/cpufreq/tegra-cpufreq.c | 178 ++++++++++++++++++-------------------
drivers/cpufreq/tegra-cpufreq.h | 37 ++++++++
drivers/cpufreq/tegra20-cpufreq.c | 133 +++++++++++++++++++++++++++
include/linux/tegra-soc.h | 11 ++-
7 files changed, 281 insertions(+), 97 deletions(-)
create mode 100644 drivers/cpufreq/tegra-cpufreq.h
create mode 100644 drivers/cpufreq/tegra20-cpufreq.c
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index 94a119a..db4414e 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -25,6 +25,7 @@
#include <linux/reboot.h>
#include <linux/irqchip.h>
#include <linux/clk-provider.h>
+#include <linux/tegra-soc.h>
#include <asm/hardware/cache-l2x0.h>
@@ -109,6 +110,7 @@ void __init tegra_init_early(void)
void __init tegra_init_late(void)
{
+ tegra_cpufreq_init();
tegra_init_suspend();
tegra_cpuidle_init();
tegra_powergate_debugfs_init();
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 0fa204b..d62902a 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -229,9 +229,19 @@ config ARM_SPEAR_CPUFREQ
This adds the CPUFreq driver support for SPEAr SOCs.
config ARM_TEGRA_CPUFREQ
- bool "TEGRA CPUFreq support"
- depends on ARCH_TEGRA
+ bool
+ select CPU_FREQ_TABLE
+
+config ARM_EXYNOS_CPUFREQ
+ bool
select CPU_FREQ_TABLE
+
+config ARM_TEGRA20_CPUFREQ
+ bool "NVIDIA TEGRA20"
+ depends on ARCH_TEGRA
default y
+ select ARM_TEGRA_CPUFREQ
help
- This adds the CPUFreq driver support for TEGRA SOCs.
+ This adds the CPUFreq driver for NVIDIA TEGRA20 SoC.
+
+ If in doubt, say N.
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index ad5866c..22a85f0 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -77,6 +77,7 @@ obj-$(CONFIG_ARM_SA1100_CPUFREQ) += sa1100-cpufreq.o
obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o
obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o
obj-$(CONFIG_ARM_TEGRA_CPUFREQ) += tegra-cpufreq.o
+obj-$(CONFIG_ARM_TEGRA20_CPUFREQ) += tegra20-cpufreq.o
##################################################################################
# PowerPC platform drivers
diff --git a/drivers/cpufreq/tegra-cpufreq.c b/drivers/cpufreq/tegra-cpufreq.c
index 6eb3dd8..d40428a 100644
--- a/drivers/cpufreq/tegra-cpufreq.c
+++ b/drivers/cpufreq/tegra-cpufreq.c
@@ -23,25 +23,15 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/suspend.h>
+#include <linux/cpu.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
-static struct cpufreq_frequency_table freq_table[] = {
- { .frequency = 216000 },
- { .frequency = 312000 },
- { .frequency = 456000 },
- { .frequency = 608000 },
- { .frequency = 760000 },
- { .frequency = 816000 },
- { .frequency = 912000 },
- { .frequency = 1000000 },
- { .frequency = CPUFREQ_TABLE_END },
-};
+#include "tegra-cpufreq.h"
-#define NUM_CPUS 2
+#define NUM_CPUS 4
-static struct clk *cpu_clk;
-static struct clk *pll_x_clk;
-static struct clk *pll_p_clk;
-static struct clk *emc_clk;
+static struct tegra_cpufreq_data *tegra_data;
static unsigned long target_cpu_speed[NUM_CPUS];
static DEFINE_MUTEX(tegra_cpu_lock);
@@ -49,53 +39,17 @@ static bool is_suspended;
static int tegra_verify_speed(struct cpufreq_policy *policy)
{
- return cpufreq_frequency_table_verify(policy, freq_table);
+ return cpufreq_frequency_table_verify(policy, tegra_data->freq_table);
}
static unsigned int tegra_getspeed(unsigned int cpu)
{
unsigned long rate;
- rate = clk_get_rate(cpu_clk) / 1000;
+ rate = clk_get_rate(tegra_data->cpu_clk) / 1000;
return rate;
}
-static int tegra_cpu_clk_set_rate(unsigned long rate)
-{
- int ret;
-
- /*
- * Take an extra reference to the main pll so it doesn't turn
- * off when we move the cpu off of it
- */
- clk_prepare_enable(pll_x_clk);
-
- ret = clk_set_parent(cpu_clk, pll_p_clk);
- if (ret) {
- pr_err("Failed to switch cpu to clock pll_p\n");
- goto out;
- }
-
- if (rate == clk_get_rate(pll_p_clk))
- goto out;
-
- ret = clk_set_rate(pll_x_clk, rate);
- if (ret) {
- pr_err("Failed to change pll_x to %lu\n", rate);
- goto out;
- }
-
- ret = clk_set_parent(cpu_clk, pll_x_clk);
- if (ret) {
- pr_err("Failed to switch cpu to clock pll_x\n");
- goto out;
- }
-
-out:
- clk_disable_unprepare(pll_x_clk);
- return ret;
-}
-
static int tegra_update_cpu_speed(struct cpufreq_policy *policy,
unsigned long rate)
{
@@ -112,12 +66,8 @@ static int tegra_update_cpu_speed(struct cpufreq_policy *policy,
* Vote on memory bus frequency based on cpu frequency
* This sets the minimum frequency, display or avp may request higher
*/
- if (rate >= 816000)
- clk_set_rate(emc_clk, 600000000); /* cpu 816 MHz, emc max */
- else if (rate >= 456000)
- clk_set_rate(emc_clk, 300000000); /* cpu 456 MHz, emc 150Mhz */
- else
- clk_set_rate(emc_clk, 100000000); /* emc 50Mhz */
+ if (tegra_data->vote_emc_on_cpu_rate)
+ tegra_data->vote_emc_on_cpu_rate(rate);
cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
@@ -126,7 +76,7 @@ static int tegra_update_cpu_speed(struct cpufreq_policy *policy,
freqs.old, freqs.new);
#endif
- ret = tegra_cpu_clk_set_rate(freqs.new * 1000);
+ ret = tegra_data->cpu_clk_set_rate(freqs.new * 1000);
if (ret) {
pr_err("cpu-tegra: Failed to set cpu frequency to %d kHz\n",
freqs.new);
@@ -152,6 +102,7 @@ static int tegra_target(struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation)
{
+ struct cpufreq_frequency_table *freq_table = tegra_data->freq_table;
unsigned int idx;
unsigned int freq;
int ret = 0;
@@ -163,8 +114,8 @@ static int tegra_target(struct cpufreq_policy *policy,
goto out;
}
- cpufreq_frequency_table_target(policy, freq_table, target_freq,
- relation, &idx);
+ cpufreq_frequency_table_target(policy, freq_table,
+ target_freq, relation, &idx);
freq = freq_table[idx].frequency;
@@ -180,6 +131,8 @@ out:
static int tegra_pm_notify(struct notifier_block *nb, unsigned long event,
void *dummy)
{
+ struct cpufreq_frequency_table *freq_table = tegra_data->freq_table;
+
mutex_lock(&tegra_cpu_lock);
if (event == PM_SUSPEND_PREPARE) {
struct cpufreq_policy *policy = cpufreq_cpu_get(0);
@@ -202,11 +155,11 @@ static struct notifier_block tegra_cpu_pm_notifier = {
static int tegra_cpu_init(struct cpufreq_policy *policy)
{
- clk_prepare_enable(emc_clk);
- clk_prepare_enable(cpu_clk);
+ if (tegra_data->cpufreq_clk_init)
+ tegra_data->cpufreq_clk_init();
- cpufreq_frequency_table_cpuinfo(policy, freq_table);
- cpufreq_frequency_table_get_attr(freq_table, policy->cpu);
+ cpufreq_frequency_table_cpuinfo(policy, tegra_data->freq_table);
+ cpufreq_frequency_table_get_attr(tegra_data->freq_table, policy->cpu);
policy->cur = tegra_getspeed(policy->cpu);
target_cpu_speed[policy->cpu] = policy->cur;
@@ -223,8 +176,9 @@ static int tegra_cpu_init(struct cpufreq_policy *policy)
static int tegra_cpu_exit(struct cpufreq_policy *policy)
{
- cpufreq_frequency_table_cpuinfo(policy, freq_table);
- clk_disable_unprepare(emc_clk);
+ cpufreq_frequency_table_cpuinfo(policy, tegra_data->freq_table);
+ if (tegra_data->cpufreq_clk_exit)
+ tegra_data->cpufreq_clk_exit();
return 0;
}
@@ -243,39 +197,77 @@ static struct cpufreq_driver tegra_cpufreq_driver = {
.attr = tegra_cpufreq_attr,
};
-static int __init tegra_cpufreq_init(void)
+static struct {
+ char *compat;
+ int (*init)(struct tegra_cpufreq_data *);
+} tegra_init_funcs[] = {
+ { "nvidia,tegra20", tegra20_cpufreq_init },
+};
+
+static int tegra_cpufreq_probe(struct platform_device *pdev)
{
- cpu_clk = clk_get_sys(NULL, "cclk");
- if (IS_ERR(cpu_clk))
- return PTR_ERR(cpu_clk);
-
- pll_x_clk = clk_get_sys(NULL, "pll_x");
- if (IS_ERR(pll_x_clk))
- return PTR_ERR(pll_x_clk);
-
- pll_p_clk = clk_get_sys(NULL, "pll_p");
- if (IS_ERR(pll_p_clk))
- return PTR_ERR(pll_p_clk);
-
- emc_clk = clk_get_sys("cpu", "emc");
- if (IS_ERR(emc_clk)) {
- clk_put(cpu_clk);
- return PTR_ERR(emc_clk);
+ int i;
+ int ret = -EINVAL;
+
+ tegra_data = devm_kzalloc(&pdev->dev,
+ sizeof(*tegra_data), GFP_KERNEL);
+ if (!tegra_data) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ tegra_data->dev = &pdev->dev;
+
+ for (i = 0; i < ARRAY_SIZE(tegra_init_funcs); i++) {
+ if (of_machine_is_compatible(tegra_init_funcs[i].compat)) {
+ ret = tegra_init_funcs[i].init(tegra_data);
+ if (!ret)
+ break;
+ else
+ goto out;
+ }
+ }
+ if (i == ARRAY_SIZE(tegra_init_funcs))
+ goto out;
+
+ ret = cpufreq_register_driver(&tegra_cpufreq_driver);
+ if (ret) {
+ dev_err(tegra_data->dev,
+ "%s: failed to register cpufreq driver\n", __func__);
+ goto out;
}
- return cpufreq_register_driver(&tegra_cpufreq_driver);
+ return 0;
+out:
+ return ret;
}
-static void __exit tegra_cpufreq_exit(void)
+static int tegra_cpufreq_remove(struct platform_device *pdev)
{
- cpufreq_unregister_driver(&tegra_cpufreq_driver);
- clk_put(emc_clk);
- clk_put(cpu_clk);
+ cpufreq_unregister_driver(&tegra_cpufreq_driver);
+ return 0;
}
+static struct platform_driver tegra_cpufreq_platdrv = {
+ .driver = {
+ .name = "tegra-cpufreq",
+ .owner = THIS_MODULE,
+ },
+ .probe = tegra_cpufreq_probe,
+ .remove = tegra_cpufreq_remove,
+};
+module_platform_driver(tegra_cpufreq_platdrv);
+
+int __init tegra_cpufreq_init(void)
+{
+ struct platform_device_info devinfo = { .name = "tegra-cpufreq", };
+
+ platform_device_register_full(&devinfo);
+
+ return 0;
+}
+EXPORT_SYMBOL(tegra_cpufreq_init);
MODULE_AUTHOR("Colin Cross <ccross@android.com>");
MODULE_DESCRIPTION("cpufreq driver for Nvidia Tegra2");
MODULE_LICENSE("GPL");
-module_init(tegra_cpufreq_init);
-module_exit(tegra_cpufreq_exit);
diff --git a/drivers/cpufreq/tegra-cpufreq.h b/drivers/cpufreq/tegra-cpufreq.h
new file mode 100644
index 0000000..4de091f
--- /dev/null
+++ b/drivers/cpufreq/tegra-cpufreq.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __LINUX_TEGRA_CPUFREQ_H
+#define __LINUX_TEGRA_CPUFREQ_H
+
+struct tegra_cpufreq_data {
+ struct device *dev;
+ struct clk *cpu_clk;
+ struct cpufreq_frequency_table *freq_table;
+ void (*vote_emc_on_cpu_rate)(unsigned long);
+ int (*cpu_clk_set_rate)(unsigned long);
+ void (*cpufreq_clk_init)(void);
+ void (*cpufreq_clk_exit)(void);
+};
+
+#ifdef CONFIG_ARM_TEGRA20_CPUFREQ
+int tegra20_cpufreq_init(struct tegra_cpufreq_data *data);
+#else
+static inline int tegra20_cpufreq_init(struct tegra_cpufreq_data *data)
+{ return -EOPNOTSUPP; }
+#endif
+
+#endif /* __LINUX_TEGRA_CPUFREQ_H_ */
diff --git a/drivers/cpufreq/tegra20-cpufreq.c b/drivers/cpufreq/tegra20-cpufreq.c
new file mode 100644
index 0000000..ffc2ba6
--- /dev/null
+++ b/drivers/cpufreq/tegra20-cpufreq.c
@@ -0,0 +1,133 @@
+/*
+ * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/cpufreq.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/suspend.h>
+#include <linux/cpu.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+
+#include "tegra-cpufreq.h"
+
+static struct cpufreq_frequency_table freq_table[] = {
+ { .frequency = 216000 },
+ { .frequency = 312000 },
+ { .frequency = 456000 },
+ { .frequency = 608000 },
+ { .frequency = 760000 },
+ { .frequency = 816000 },
+ { .frequency = 912000 },
+ { .frequency = 1000000 },
+ { .frequency = CPUFREQ_TABLE_END },
+};
+
+static struct clk *cpu_clk;
+static struct clk *pll_x_clk;
+static struct clk *pll_p_clk;
+static struct clk *emc_clk;
+
+static void tegra20_vote_emc_on_cpu_rate(unsigned long rate)
+{
+ if (rate >= 816000)
+ clk_set_rate(emc_clk, 600000000); /* cpu 816 MHz, emc max */
+ else if (rate >= 456000)
+ clk_set_rate(emc_clk, 300000000); /* cpu 456 MHz, emc 150Mhz */
+ else
+ clk_set_rate(emc_clk, 100000000); /* emc 50Mhz */
+}
+
+static int tegra20_cpu_clk_set_rate(unsigned long rate)
+{
+ int ret;
+
+ /*
+ * Take an extra reference to the main pll so it doesn't turn
+ * off when we move the cpu off of it
+ */
+ clk_prepare_enable(pll_x_clk);
+
+ ret = clk_set_parent(cpu_clk, pll_p_clk);
+ if (ret) {
+ pr_err("Failed to switch cpu to clock pll_p\n");
+ goto out;
+ }
+
+ if (rate == clk_get_rate(pll_p_clk))
+ goto out;
+
+ ret = clk_set_rate(pll_x_clk, rate);
+ if (ret) {
+ pr_err("Failed to change pll_x to %lu\n", rate);
+ goto out;
+ }
+
+ ret = clk_set_parent(cpu_clk, pll_x_clk);
+ if (ret) {
+ pr_err("Failed to switch cpu to clock pll_x\n");
+ goto out;
+ }
+
+out:
+ clk_disable_unprepare(pll_x_clk);
+ return ret;
+}
+
+static void tegra20_cpufreq_clk_init(void)
+{
+ clk_prepare_enable(emc_clk);
+ clk_prepare_enable(cpu_clk);
+}
+
+static void tegra20_cpufreq_clk_exit(void)
+{
+ clk_disable_unprepare(cpu_clk);
+ clk_disable_unprepare(emc_clk);
+}
+
+int tegra20_cpufreq_init(struct tegra_cpufreq_data *data)
+{
+ cpu_clk = clk_get_sys(NULL, "cclk");
+ if (IS_ERR(cpu_clk))
+ return PTR_ERR(cpu_clk);
+
+ pll_x_clk = clk_get_sys(NULL, "pll_x");
+ if (IS_ERR(pll_x_clk))
+ return PTR_ERR(pll_x_clk);
+
+ pll_p_clk = clk_get_sys(NULL, "pll_p");
+ if (IS_ERR(pll_p_clk))
+ return PTR_ERR(pll_p_clk);
+
+ emc_clk = clk_get_sys("cpu", "emc");
+ if (IS_ERR(emc_clk)) {
+ clk_put(cpu_clk);
+ return PTR_ERR(emc_clk);
+ }
+
+ data->cpu_clk = cpu_clk;
+ data->freq_table = freq_table;
+ data->vote_emc_on_cpu_rate = tegra20_vote_emc_on_cpu_rate;
+ data->cpu_clk_set_rate = tegra20_cpu_clk_set_rate;
+ data->cpufreq_clk_init = tegra20_cpufreq_clk_init;
+ data->cpufreq_clk_exit = tegra20_cpufreq_clk_exit;
+
+ return 0;
+}
+EXPORT_SYMBOL(tegra20_cpufreq_init);
diff --git a/include/linux/tegra-soc.h b/include/linux/tegra-soc.h
index 95f611d..015b905 100644
--- a/include/linux/tegra-soc.h
+++ b/include/linux/tegra-soc.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2012,2013, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@@ -19,4 +19,13 @@
u32 tegra_read_chipid(void);
+#ifdef CONFIG_ARM_TEGRA_CPUFREQ
+int tegra_cpufreq_init(void);
+#else
+static inline int tegra_cpufreq_init(void)
+{
+ retrun EOPNOTSUPP;
+}
+#endif
+
#endif /* __LINUX_TEGRA_SOC_H_ */
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH 2/2] cpufreq: tegra: Re-model Tegra cpufreq driver
@ 2013-09-11 11:19 ` Bill Huang
0 siblings, 0 replies; 20+ messages in thread
From: Bill Huang @ 2013-09-11 11:19 UTC (permalink / raw)
To: linux-arm-kernel
Re-model Tegra cpufreq driver to support all Tegra series of SoCs.
* Make tegra-cpufreq.c a generic Tegra cpufreq driver.
* Move Tegra20 specific codes into tegra20-cpufreq.c.
* Bind Tegra cpufreq dirver with a fake device so defer probe would work
when we're going to get regulator in the driver to support voltage
scaling (DVFS).
* Call tegra_cpufreq_init() in Tegra machine code specifically so it
won't be called in multi-platform kernel which is not running on Tegra
SoCs.
Signed-off-by: Bill Huang <bilhuang@nvidia.com>
---
arch/arm/mach-tegra/common.c | 2 +
drivers/cpufreq/Kconfig.arm | 16 +++-
drivers/cpufreq/Makefile | 1 +
drivers/cpufreq/tegra-cpufreq.c | 178 ++++++++++++++++++-------------------
drivers/cpufreq/tegra-cpufreq.h | 37 ++++++++
drivers/cpufreq/tegra20-cpufreq.c | 133 +++++++++++++++++++++++++++
include/linux/tegra-soc.h | 11 ++-
7 files changed, 281 insertions(+), 97 deletions(-)
create mode 100644 drivers/cpufreq/tegra-cpufreq.h
create mode 100644 drivers/cpufreq/tegra20-cpufreq.c
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index 94a119a..db4414e 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -25,6 +25,7 @@
#include <linux/reboot.h>
#include <linux/irqchip.h>
#include <linux/clk-provider.h>
+#include <linux/tegra-soc.h>
#include <asm/hardware/cache-l2x0.h>
@@ -109,6 +110,7 @@ void __init tegra_init_early(void)
void __init tegra_init_late(void)
{
+ tegra_cpufreq_init();
tegra_init_suspend();
tegra_cpuidle_init();
tegra_powergate_debugfs_init();
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 0fa204b..d62902a 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -229,9 +229,19 @@ config ARM_SPEAR_CPUFREQ
This adds the CPUFreq driver support for SPEAr SOCs.
config ARM_TEGRA_CPUFREQ
- bool "TEGRA CPUFreq support"
- depends on ARCH_TEGRA
+ bool
+ select CPU_FREQ_TABLE
+
+config ARM_EXYNOS_CPUFREQ
+ bool
select CPU_FREQ_TABLE
+
+config ARM_TEGRA20_CPUFREQ
+ bool "NVIDIA TEGRA20"
+ depends on ARCH_TEGRA
default y
+ select ARM_TEGRA_CPUFREQ
help
- This adds the CPUFreq driver support for TEGRA SOCs.
+ This adds the CPUFreq driver for NVIDIA TEGRA20 SoC.
+
+ If in doubt, say N.
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index ad5866c..22a85f0 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -77,6 +77,7 @@ obj-$(CONFIG_ARM_SA1100_CPUFREQ) += sa1100-cpufreq.o
obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o
obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o
obj-$(CONFIG_ARM_TEGRA_CPUFREQ) += tegra-cpufreq.o
+obj-$(CONFIG_ARM_TEGRA20_CPUFREQ) += tegra20-cpufreq.o
##################################################################################
# PowerPC platform drivers
diff --git a/drivers/cpufreq/tegra-cpufreq.c b/drivers/cpufreq/tegra-cpufreq.c
index 6eb3dd8..d40428a 100644
--- a/drivers/cpufreq/tegra-cpufreq.c
+++ b/drivers/cpufreq/tegra-cpufreq.c
@@ -23,25 +23,15 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/suspend.h>
+#include <linux/cpu.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
-static struct cpufreq_frequency_table freq_table[] = {
- { .frequency = 216000 },
- { .frequency = 312000 },
- { .frequency = 456000 },
- { .frequency = 608000 },
- { .frequency = 760000 },
- { .frequency = 816000 },
- { .frequency = 912000 },
- { .frequency = 1000000 },
- { .frequency = CPUFREQ_TABLE_END },
-};
+#include "tegra-cpufreq.h"
-#define NUM_CPUS 2
+#define NUM_CPUS 4
-static struct clk *cpu_clk;
-static struct clk *pll_x_clk;
-static struct clk *pll_p_clk;
-static struct clk *emc_clk;
+static struct tegra_cpufreq_data *tegra_data;
static unsigned long target_cpu_speed[NUM_CPUS];
static DEFINE_MUTEX(tegra_cpu_lock);
@@ -49,53 +39,17 @@ static bool is_suspended;
static int tegra_verify_speed(struct cpufreq_policy *policy)
{
- return cpufreq_frequency_table_verify(policy, freq_table);
+ return cpufreq_frequency_table_verify(policy, tegra_data->freq_table);
}
static unsigned int tegra_getspeed(unsigned int cpu)
{
unsigned long rate;
- rate = clk_get_rate(cpu_clk) / 1000;
+ rate = clk_get_rate(tegra_data->cpu_clk) / 1000;
return rate;
}
-static int tegra_cpu_clk_set_rate(unsigned long rate)
-{
- int ret;
-
- /*
- * Take an extra reference to the main pll so it doesn't turn
- * off when we move the cpu off of it
- */
- clk_prepare_enable(pll_x_clk);
-
- ret = clk_set_parent(cpu_clk, pll_p_clk);
- if (ret) {
- pr_err("Failed to switch cpu to clock pll_p\n");
- goto out;
- }
-
- if (rate == clk_get_rate(pll_p_clk))
- goto out;
-
- ret = clk_set_rate(pll_x_clk, rate);
- if (ret) {
- pr_err("Failed to change pll_x to %lu\n", rate);
- goto out;
- }
-
- ret = clk_set_parent(cpu_clk, pll_x_clk);
- if (ret) {
- pr_err("Failed to switch cpu to clock pll_x\n");
- goto out;
- }
-
-out:
- clk_disable_unprepare(pll_x_clk);
- return ret;
-}
-
static int tegra_update_cpu_speed(struct cpufreq_policy *policy,
unsigned long rate)
{
@@ -112,12 +66,8 @@ static int tegra_update_cpu_speed(struct cpufreq_policy *policy,
* Vote on memory bus frequency based on cpu frequency
* This sets the minimum frequency, display or avp may request higher
*/
- if (rate >= 816000)
- clk_set_rate(emc_clk, 600000000); /* cpu 816 MHz, emc max */
- else if (rate >= 456000)
- clk_set_rate(emc_clk, 300000000); /* cpu 456 MHz, emc 150Mhz */
- else
- clk_set_rate(emc_clk, 100000000); /* emc 50Mhz */
+ if (tegra_data->vote_emc_on_cpu_rate)
+ tegra_data->vote_emc_on_cpu_rate(rate);
cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
@@ -126,7 +76,7 @@ static int tegra_update_cpu_speed(struct cpufreq_policy *policy,
freqs.old, freqs.new);
#endif
- ret = tegra_cpu_clk_set_rate(freqs.new * 1000);
+ ret = tegra_data->cpu_clk_set_rate(freqs.new * 1000);
if (ret) {
pr_err("cpu-tegra: Failed to set cpu frequency to %d kHz\n",
freqs.new);
@@ -152,6 +102,7 @@ static int tegra_target(struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation)
{
+ struct cpufreq_frequency_table *freq_table = tegra_data->freq_table;
unsigned int idx;
unsigned int freq;
int ret = 0;
@@ -163,8 +114,8 @@ static int tegra_target(struct cpufreq_policy *policy,
goto out;
}
- cpufreq_frequency_table_target(policy, freq_table, target_freq,
- relation, &idx);
+ cpufreq_frequency_table_target(policy, freq_table,
+ target_freq, relation, &idx);
freq = freq_table[idx].frequency;
@@ -180,6 +131,8 @@ out:
static int tegra_pm_notify(struct notifier_block *nb, unsigned long event,
void *dummy)
{
+ struct cpufreq_frequency_table *freq_table = tegra_data->freq_table;
+
mutex_lock(&tegra_cpu_lock);
if (event == PM_SUSPEND_PREPARE) {
struct cpufreq_policy *policy = cpufreq_cpu_get(0);
@@ -202,11 +155,11 @@ static struct notifier_block tegra_cpu_pm_notifier = {
static int tegra_cpu_init(struct cpufreq_policy *policy)
{
- clk_prepare_enable(emc_clk);
- clk_prepare_enable(cpu_clk);
+ if (tegra_data->cpufreq_clk_init)
+ tegra_data->cpufreq_clk_init();
- cpufreq_frequency_table_cpuinfo(policy, freq_table);
- cpufreq_frequency_table_get_attr(freq_table, policy->cpu);
+ cpufreq_frequency_table_cpuinfo(policy, tegra_data->freq_table);
+ cpufreq_frequency_table_get_attr(tegra_data->freq_table, policy->cpu);
policy->cur = tegra_getspeed(policy->cpu);
target_cpu_speed[policy->cpu] = policy->cur;
@@ -223,8 +176,9 @@ static int tegra_cpu_init(struct cpufreq_policy *policy)
static int tegra_cpu_exit(struct cpufreq_policy *policy)
{
- cpufreq_frequency_table_cpuinfo(policy, freq_table);
- clk_disable_unprepare(emc_clk);
+ cpufreq_frequency_table_cpuinfo(policy, tegra_data->freq_table);
+ if (tegra_data->cpufreq_clk_exit)
+ tegra_data->cpufreq_clk_exit();
return 0;
}
@@ -243,39 +197,77 @@ static struct cpufreq_driver tegra_cpufreq_driver = {
.attr = tegra_cpufreq_attr,
};
-static int __init tegra_cpufreq_init(void)
+static struct {
+ char *compat;
+ int (*init)(struct tegra_cpufreq_data *);
+} tegra_init_funcs[] = {
+ { "nvidia,tegra20", tegra20_cpufreq_init },
+};
+
+static int tegra_cpufreq_probe(struct platform_device *pdev)
{
- cpu_clk = clk_get_sys(NULL, "cclk");
- if (IS_ERR(cpu_clk))
- return PTR_ERR(cpu_clk);
-
- pll_x_clk = clk_get_sys(NULL, "pll_x");
- if (IS_ERR(pll_x_clk))
- return PTR_ERR(pll_x_clk);
-
- pll_p_clk = clk_get_sys(NULL, "pll_p");
- if (IS_ERR(pll_p_clk))
- return PTR_ERR(pll_p_clk);
-
- emc_clk = clk_get_sys("cpu", "emc");
- if (IS_ERR(emc_clk)) {
- clk_put(cpu_clk);
- return PTR_ERR(emc_clk);
+ int i;
+ int ret = -EINVAL;
+
+ tegra_data = devm_kzalloc(&pdev->dev,
+ sizeof(*tegra_data), GFP_KERNEL);
+ if (!tegra_data) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ tegra_data->dev = &pdev->dev;
+
+ for (i = 0; i < ARRAY_SIZE(tegra_init_funcs); i++) {
+ if (of_machine_is_compatible(tegra_init_funcs[i].compat)) {
+ ret = tegra_init_funcs[i].init(tegra_data);
+ if (!ret)
+ break;
+ else
+ goto out;
+ }
+ }
+ if (i == ARRAY_SIZE(tegra_init_funcs))
+ goto out;
+
+ ret = cpufreq_register_driver(&tegra_cpufreq_driver);
+ if (ret) {
+ dev_err(tegra_data->dev,
+ "%s: failed to register cpufreq driver\n", __func__);
+ goto out;
}
- return cpufreq_register_driver(&tegra_cpufreq_driver);
+ return 0;
+out:
+ return ret;
}
-static void __exit tegra_cpufreq_exit(void)
+static int tegra_cpufreq_remove(struct platform_device *pdev)
{
- cpufreq_unregister_driver(&tegra_cpufreq_driver);
- clk_put(emc_clk);
- clk_put(cpu_clk);
+ cpufreq_unregister_driver(&tegra_cpufreq_driver);
+ return 0;
}
+static struct platform_driver tegra_cpufreq_platdrv = {
+ .driver = {
+ .name = "tegra-cpufreq",
+ .owner = THIS_MODULE,
+ },
+ .probe = tegra_cpufreq_probe,
+ .remove = tegra_cpufreq_remove,
+};
+module_platform_driver(tegra_cpufreq_platdrv);
+
+int __init tegra_cpufreq_init(void)
+{
+ struct platform_device_info devinfo = { .name = "tegra-cpufreq", };
+
+ platform_device_register_full(&devinfo);
+
+ return 0;
+}
+EXPORT_SYMBOL(tegra_cpufreq_init);
MODULE_AUTHOR("Colin Cross <ccross@android.com>");
MODULE_DESCRIPTION("cpufreq driver for Nvidia Tegra2");
MODULE_LICENSE("GPL");
-module_init(tegra_cpufreq_init);
-module_exit(tegra_cpufreq_exit);
diff --git a/drivers/cpufreq/tegra-cpufreq.h b/drivers/cpufreq/tegra-cpufreq.h
new file mode 100644
index 0000000..4de091f
--- /dev/null
+++ b/drivers/cpufreq/tegra-cpufreq.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __LINUX_TEGRA_CPUFREQ_H
+#define __LINUX_TEGRA_CPUFREQ_H
+
+struct tegra_cpufreq_data {
+ struct device *dev;
+ struct clk *cpu_clk;
+ struct cpufreq_frequency_table *freq_table;
+ void (*vote_emc_on_cpu_rate)(unsigned long);
+ int (*cpu_clk_set_rate)(unsigned long);
+ void (*cpufreq_clk_init)(void);
+ void (*cpufreq_clk_exit)(void);
+};
+
+#ifdef CONFIG_ARM_TEGRA20_CPUFREQ
+int tegra20_cpufreq_init(struct tegra_cpufreq_data *data);
+#else
+static inline int tegra20_cpufreq_init(struct tegra_cpufreq_data *data)
+{ return -EOPNOTSUPP; }
+#endif
+
+#endif /* __LINUX_TEGRA_CPUFREQ_H_ */
diff --git a/drivers/cpufreq/tegra20-cpufreq.c b/drivers/cpufreq/tegra20-cpufreq.c
new file mode 100644
index 0000000..ffc2ba6
--- /dev/null
+++ b/drivers/cpufreq/tegra20-cpufreq.c
@@ -0,0 +1,133 @@
+/*
+ * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/cpufreq.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/suspend.h>
+#include <linux/cpu.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+
+#include "tegra-cpufreq.h"
+
+static struct cpufreq_frequency_table freq_table[] = {
+ { .frequency = 216000 },
+ { .frequency = 312000 },
+ { .frequency = 456000 },
+ { .frequency = 608000 },
+ { .frequency = 760000 },
+ { .frequency = 816000 },
+ { .frequency = 912000 },
+ { .frequency = 1000000 },
+ { .frequency = CPUFREQ_TABLE_END },
+};
+
+static struct clk *cpu_clk;
+static struct clk *pll_x_clk;
+static struct clk *pll_p_clk;
+static struct clk *emc_clk;
+
+static void tegra20_vote_emc_on_cpu_rate(unsigned long rate)
+{
+ if (rate >= 816000)
+ clk_set_rate(emc_clk, 600000000); /* cpu 816 MHz, emc max */
+ else if (rate >= 456000)
+ clk_set_rate(emc_clk, 300000000); /* cpu 456 MHz, emc 150Mhz */
+ else
+ clk_set_rate(emc_clk, 100000000); /* emc 50Mhz */
+}
+
+static int tegra20_cpu_clk_set_rate(unsigned long rate)
+{
+ int ret;
+
+ /*
+ * Take an extra reference to the main pll so it doesn't turn
+ * off when we move the cpu off of it
+ */
+ clk_prepare_enable(pll_x_clk);
+
+ ret = clk_set_parent(cpu_clk, pll_p_clk);
+ if (ret) {
+ pr_err("Failed to switch cpu to clock pll_p\n");
+ goto out;
+ }
+
+ if (rate == clk_get_rate(pll_p_clk))
+ goto out;
+
+ ret = clk_set_rate(pll_x_clk, rate);
+ if (ret) {
+ pr_err("Failed to change pll_x to %lu\n", rate);
+ goto out;
+ }
+
+ ret = clk_set_parent(cpu_clk, pll_x_clk);
+ if (ret) {
+ pr_err("Failed to switch cpu to clock pll_x\n");
+ goto out;
+ }
+
+out:
+ clk_disable_unprepare(pll_x_clk);
+ return ret;
+}
+
+static void tegra20_cpufreq_clk_init(void)
+{
+ clk_prepare_enable(emc_clk);
+ clk_prepare_enable(cpu_clk);
+}
+
+static void tegra20_cpufreq_clk_exit(void)
+{
+ clk_disable_unprepare(cpu_clk);
+ clk_disable_unprepare(emc_clk);
+}
+
+int tegra20_cpufreq_init(struct tegra_cpufreq_data *data)
+{
+ cpu_clk = clk_get_sys(NULL, "cclk");
+ if (IS_ERR(cpu_clk))
+ return PTR_ERR(cpu_clk);
+
+ pll_x_clk = clk_get_sys(NULL, "pll_x");
+ if (IS_ERR(pll_x_clk))
+ return PTR_ERR(pll_x_clk);
+
+ pll_p_clk = clk_get_sys(NULL, "pll_p");
+ if (IS_ERR(pll_p_clk))
+ return PTR_ERR(pll_p_clk);
+
+ emc_clk = clk_get_sys("cpu", "emc");
+ if (IS_ERR(emc_clk)) {
+ clk_put(cpu_clk);
+ return PTR_ERR(emc_clk);
+ }
+
+ data->cpu_clk = cpu_clk;
+ data->freq_table = freq_table;
+ data->vote_emc_on_cpu_rate = tegra20_vote_emc_on_cpu_rate;
+ data->cpu_clk_set_rate = tegra20_cpu_clk_set_rate;
+ data->cpufreq_clk_init = tegra20_cpufreq_clk_init;
+ data->cpufreq_clk_exit = tegra20_cpufreq_clk_exit;
+
+ return 0;
+}
+EXPORT_SYMBOL(tegra20_cpufreq_init);
diff --git a/include/linux/tegra-soc.h b/include/linux/tegra-soc.h
index 95f611d..015b905 100644
--- a/include/linux/tegra-soc.h
+++ b/include/linux/tegra-soc.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2012,2013, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@@ -19,4 +19,13 @@
u32 tegra_read_chipid(void);
+#ifdef CONFIG_ARM_TEGRA_CPUFREQ
+int tegra_cpufreq_init(void);
+#else
+static inline int tegra_cpufreq_init(void)
+{
+ retrun EOPNOTSUPP;
+}
+#endif
+
#endif /* __LINUX_TEGRA_SOC_H_ */
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread* Re: [PATCH 2/2] cpufreq: tegra: Re-model Tegra cpufreq driver
2013-09-11 11:19 ` Bill Huang
@ 2013-09-11 19:33 ` Stephen Warren
-1 siblings, 0 replies; 20+ messages in thread
From: Stephen Warren @ 2013-09-11 19:33 UTC (permalink / raw)
To: Bill Huang
Cc: rjw, viresh.kumar, linux, linux-arm-kernel, linux-tegra,
linux-kernel, cpufreq, linux-pm
On 09/11/2013 05:19 AM, Bill Huang wrote:
> Re-model Tegra cpufreq driver to support all Tegra series of SoCs.
>
> * Make tegra-cpufreq.c a generic Tegra cpufreq driver.
> * Move Tegra20 specific codes into tegra20-cpufreq.c.
> * Bind Tegra cpufreq dirver with a fake device so defer probe would work
> when we're going to get regulator in the driver to support voltage
> scaling (DVFS).
> * Call tegra_cpufreq_init() in Tegra machine code specifically so it
> won't be called in multi-platform kernel which is not running on Tegra
> SoCs.
That's a lot of things for one patch. Can this please be split up?
In particular, I would like a separate patch for the final bullet point,
and for that patch to be the first in the series, so that we can merge
it into both the Tegra and cpufreq trees if needed to resolve any conflicts.
> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> config ARM_TEGRA_CPUFREQ
> - bool "TEGRA CPUFreq support"
> - depends on ARCH_TEGRA
> + bool
> + select CPU_FREQ_TABLE
Why make this a hidden option? It'd be best to leave it user-visible, so
that existing defconfigs aren't broken by this change.
> +config ARM_EXYNOS_CPUFREQ
> + bool
> select CPU_FREQ_TABLE
I think that Exynos change is a mistake?
> +
> +config ARM_TEGRA20_CPUFREQ
> + bool "NVIDIA TEGRA20"
> + depends on ARCH_TEGRA
Shouldn't that be ARCH_TEGRA_2x_SOC specifically?
> default y
Does the syntax "default ARM_TEGRA_CPUFREQ" work? Actually, this should
depend on ARM_TEGRA_CPUFREQ rather than select it, and that way you can
keep this "default y" and it'll only be enabled if Tegra cpufreq is enabled.
In summary, I think the following should work well:
config ARM_TEGRA_CPUFREQ
bool "TEGRA CPUFreq support"
depends on ARCH_TEGRA
select CPU_FREQ_TABLE
config ARM_TEGRA20_CPUFREQ
bool "NVIDIA TEGRA20"
depends on ARM_TEGRA_CPUFREQ && ARCH_TEGRA_2x_SOC
default y
help
This adds the CPUFreq driver for NVIDIA TEGRA20 SoC.
If in doubt, say N.
> diff --git a/drivers/cpufreq/tegra-cpufreq.c b/drivers/cpufreq/tegra-cpufreq.c
> -#define NUM_CPUS 2
> +#define NUM_CPUS 4
NUM_ or MAX_?
> diff --git a/drivers/cpufreq/tegra-cpufreq.h b/drivers/cpufreq/tegra-cpufreq.h
> +struct tegra_cpufreq_data {
> + struct device *dev;
> + struct clk *cpu_clk;
> + struct cpufreq_frequency_table *freq_table;
> + void (*vote_emc_on_cpu_rate)(unsigned long);
> + int (*cpu_clk_set_rate)(unsigned long);
> + void (*cpufreq_clk_init)(void);
> + void (*cpufreq_clk_exit)(void);
> +};
There's a mix of runtime and configuration-time data there. It'd be
nicer to split the two out, so that all the configuration data could be
in a const struct that's pointed to by a field in the runtime data
struct, or passed back out of tegra20_cpufreq_init() as a separate
pointer variable and assigned to a separate global in tegra-cpufreq.c,
to avoid double-indirections everywhere at runtime.
> diff --git a/drivers/cpufreq/tegra20-cpufreq.c b/drivers/cpufreq/tegra20-cpufreq.c
> +static struct cpufreq_frequency_table freq_table[] = {
> + { .frequency = 216000 },
> + { .frequency = 312000 },
> + { .frequency = 456000 },
> + { .frequency = 608000 },
> + { .frequency = 760000 },
> + { .frequency = 816000 },
> + { .frequency = 912000 },
> + { .frequency = 1000000 },
> + { .frequency = CPUFREQ_TABLE_END },
> +};
Should/can we query that list from the clock driver?
> +int tegra20_cpufreq_init(struct tegra_cpufreq_data *data)
...
> + data->cpu_clk = cpu_clk;
> + data->freq_table = freq_table;
> + data->vote_emc_on_cpu_rate = tegra20_vote_emc_on_cpu_rate;
> + data->cpu_clk_set_rate = tegra20_cpu_clk_set_rate;
> + data->cpufreq_clk_init = tegra20_cpufreq_clk_init;
> + data->cpufreq_clk_exit = tegra20_cpufreq_clk_exit;
With the struct split I proposed above, most of that could just be:
*soc_config = &tegra20_cpufreq_config;
where there's an extra function parameter "struct tegra_cpufreq_config
**soc_config", and most of those values are in a static const
tegra_cpufreq_config tegra20_cpufreq_config = { ... }.
^ permalink raw reply [flat|nested] 20+ messages in thread* [PATCH 2/2] cpufreq: tegra: Re-model Tegra cpufreq driver
@ 2013-09-11 19:33 ` Stephen Warren
0 siblings, 0 replies; 20+ messages in thread
From: Stephen Warren @ 2013-09-11 19:33 UTC (permalink / raw)
To: linux-arm-kernel
On 09/11/2013 05:19 AM, Bill Huang wrote:
> Re-model Tegra cpufreq driver to support all Tegra series of SoCs.
>
> * Make tegra-cpufreq.c a generic Tegra cpufreq driver.
> * Move Tegra20 specific codes into tegra20-cpufreq.c.
> * Bind Tegra cpufreq dirver with a fake device so defer probe would work
> when we're going to get regulator in the driver to support voltage
> scaling (DVFS).
> * Call tegra_cpufreq_init() in Tegra machine code specifically so it
> won't be called in multi-platform kernel which is not running on Tegra
> SoCs.
That's a lot of things for one patch. Can this please be split up?
In particular, I would like a separate patch for the final bullet point,
and for that patch to be the first in the series, so that we can merge
it into both the Tegra and cpufreq trees if needed to resolve any conflicts.
> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> config ARM_TEGRA_CPUFREQ
> - bool "TEGRA CPUFreq support"
> - depends on ARCH_TEGRA
> + bool
> + select CPU_FREQ_TABLE
Why make this a hidden option? It'd be best to leave it user-visible, so
that existing defconfigs aren't broken by this change.
> +config ARM_EXYNOS_CPUFREQ
> + bool
> select CPU_FREQ_TABLE
I think that Exynos change is a mistake?
> +
> +config ARM_TEGRA20_CPUFREQ
> + bool "NVIDIA TEGRA20"
> + depends on ARCH_TEGRA
Shouldn't that be ARCH_TEGRA_2x_SOC specifically?
> default y
Does the syntax "default ARM_TEGRA_CPUFREQ" work? Actually, this should
depend on ARM_TEGRA_CPUFREQ rather than select it, and that way you can
keep this "default y" and it'll only be enabled if Tegra cpufreq is enabled.
In summary, I think the following should work well:
config ARM_TEGRA_CPUFREQ
bool "TEGRA CPUFreq support"
depends on ARCH_TEGRA
select CPU_FREQ_TABLE
config ARM_TEGRA20_CPUFREQ
bool "NVIDIA TEGRA20"
depends on ARM_TEGRA_CPUFREQ && ARCH_TEGRA_2x_SOC
default y
help
This adds the CPUFreq driver for NVIDIA TEGRA20 SoC.
If in doubt, say N.
> diff --git a/drivers/cpufreq/tegra-cpufreq.c b/drivers/cpufreq/tegra-cpufreq.c
> -#define NUM_CPUS 2
> +#define NUM_CPUS 4
NUM_ or MAX_?
> diff --git a/drivers/cpufreq/tegra-cpufreq.h b/drivers/cpufreq/tegra-cpufreq.h
> +struct tegra_cpufreq_data {
> + struct device *dev;
> + struct clk *cpu_clk;
> + struct cpufreq_frequency_table *freq_table;
> + void (*vote_emc_on_cpu_rate)(unsigned long);
> + int (*cpu_clk_set_rate)(unsigned long);
> + void (*cpufreq_clk_init)(void);
> + void (*cpufreq_clk_exit)(void);
> +};
There's a mix of runtime and configuration-time data there. It'd be
nicer to split the two out, so that all the configuration data could be
in a const struct that's pointed to by a field in the runtime data
struct, or passed back out of tegra20_cpufreq_init() as a separate
pointer variable and assigned to a separate global in tegra-cpufreq.c,
to avoid double-indirections everywhere at runtime.
> diff --git a/drivers/cpufreq/tegra20-cpufreq.c b/drivers/cpufreq/tegra20-cpufreq.c
> +static struct cpufreq_frequency_table freq_table[] = {
> + { .frequency = 216000 },
> + { .frequency = 312000 },
> + { .frequency = 456000 },
> + { .frequency = 608000 },
> + { .frequency = 760000 },
> + { .frequency = 816000 },
> + { .frequency = 912000 },
> + { .frequency = 1000000 },
> + { .frequency = CPUFREQ_TABLE_END },
> +};
Should/can we query that list from the clock driver?
> +int tegra20_cpufreq_init(struct tegra_cpufreq_data *data)
...
> + data->cpu_clk = cpu_clk;
> + data->freq_table = freq_table;
> + data->vote_emc_on_cpu_rate = tegra20_vote_emc_on_cpu_rate;
> + data->cpu_clk_set_rate = tegra20_cpu_clk_set_rate;
> + data->cpufreq_clk_init = tegra20_cpufreq_clk_init;
> + data->cpufreq_clk_exit = tegra20_cpufreq_clk_exit;
With the struct split I proposed above, most of that could just be:
*soc_config = &tegra20_cpufreq_config;
where there's an extra function parameter "struct tegra_cpufreq_config
**soc_config", and most of those values are in a static const
tegra_cpufreq_config tegra20_cpufreq_config = { ... }.
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH 2/2] cpufreq: tegra: Re-model Tegra cpufreq driver
2013-09-11 19:33 ` Stephen Warren
@ 2013-09-12 2:03 ` Bill Huang
-1 siblings, 0 replies; 20+ messages in thread
From: Bill Huang @ 2013-09-12 2:03 UTC (permalink / raw)
To: Stephen Warren
Cc: rjw@sisk.pl, viresh.kumar@linaro.org, linux@arm.linux.org.uk,
linux-arm-kernel@lists.infradead.org, linux-tegra@vger.kernel.org,
linux-kernel@vger.kernel.org, cpufreq@vger.kernel.org,
linux-pm@vger.kernel.org
On Thu, 2013-09-12 at 03:33 +0800, Stephen Warren wrote:
> On 09/11/2013 05:19 AM, Bill Huang wrote:
> > diff --git a/drivers/cpufreq/tegra20-cpufreq.c b/drivers/cpufreq/tegra20-cpufreq.c
>
> > +static struct cpufreq_frequency_table freq_table[] = {
> > + { .frequency = 216000 },
> > + { .frequency = 312000 },
> > + { .frequency = 456000 },
> > + { .frequency = 608000 },
> > + { .frequency = 760000 },
> > + { .frequency = 816000 },
> > + { .frequency = 912000 },
> > + { .frequency = 1000000 },
> > + { .frequency = CPUFREQ_TABLE_END },
> > +};
>
> Should/can we query that list from the clock driver?
>
It's not easy to query that list from clock driver so I'll leave it as
it was. I'll take all the other comments, thanks.
^ permalink raw reply [flat|nested] 20+ messages in thread* [PATCH 2/2] cpufreq: tegra: Re-model Tegra cpufreq driver
@ 2013-09-12 2:03 ` Bill Huang
0 siblings, 0 replies; 20+ messages in thread
From: Bill Huang @ 2013-09-12 2:03 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, 2013-09-12 at 03:33 +0800, Stephen Warren wrote:
> On 09/11/2013 05:19 AM, Bill Huang wrote:
> > diff --git a/drivers/cpufreq/tegra20-cpufreq.c b/drivers/cpufreq/tegra20-cpufreq.c
>
> > +static struct cpufreq_frequency_table freq_table[] = {
> > + { .frequency = 216000 },
> > + { .frequency = 312000 },
> > + { .frequency = 456000 },
> > + { .frequency = 608000 },
> > + { .frequency = 760000 },
> > + { .frequency = 816000 },
> > + { .frequency = 912000 },
> > + { .frequency = 1000000 },
> > + { .frequency = CPUFREQ_TABLE_END },
> > +};
>
> Should/can we query that list from the clock driver?
>
It's not easy to query that list from clock driver so I'll leave it as
it was. I'll take all the other comments, thanks.
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 2/2] cpufreq: tegra: Re-model Tegra cpufreq driver
2013-09-11 11:19 ` Bill Huang
@ 2013-09-12 10:14 ` Peter De Schrijver
-1 siblings, 0 replies; 20+ messages in thread
From: Peter De Schrijver @ 2013-09-12 10:14 UTC (permalink / raw)
To: Bill Huang
Cc: rjw@sisk.pl, viresh.kumar@linaro.org, swarren@wwwdotorg.org,
linux@arm.linux.org.uk, linux-arm-kernel@lists.infradead.org,
linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org,
cpufreq@vger.kernel.org, linux-pm@vger.kernel.org
On Wed, Sep 11, 2013 at 01:19:14PM +0200, Bill Huang wrote:
> +static inline int tegra_cpufreq_init(void)
> +{
> + retrun EOPNOTSUPP;
This should be -EOPNOTSUPP at least. I think -EINVAL might be better.
Cheers,
Peter.
^ permalink raw reply [flat|nested] 20+ messages in thread* [PATCH 2/2] cpufreq: tegra: Re-model Tegra cpufreq driver
@ 2013-09-12 10:14 ` Peter De Schrijver
0 siblings, 0 replies; 20+ messages in thread
From: Peter De Schrijver @ 2013-09-12 10:14 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Sep 11, 2013 at 01:19:14PM +0200, Bill Huang wrote:
> +static inline int tegra_cpufreq_init(void)
> +{
> + retrun EOPNOTSUPP;
This should be -EOPNOTSUPP at least. I think -EINVAL might be better.
Cheers,
Peter.
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH 2/2] cpufreq: tegra: Re-model Tegra cpufreq driver
2013-09-12 10:14 ` Peter De Schrijver
@ 2013-09-12 10:35 ` Bill Huang
-1 siblings, 0 replies; 20+ messages in thread
From: Bill Huang @ 2013-09-12 10:35 UTC (permalink / raw)
To: Peter De Schrijver
Cc: rjw@sisk.pl, viresh.kumar@linaro.org, swarren@wwwdotorg.org,
linux@arm.linux.org.uk, linux-arm-kernel@lists.infradead.org,
linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org,
cpufreq@vger.kernel.org, linux-pm@vger.kernel.org
On Thu, 2013-09-12 at 18:14 +0800, Peter De Schrijver wrote:
> On Wed, Sep 11, 2013 at 01:19:14PM +0200, Bill Huang wrote:
>
> > +static inline int tegra_cpufreq_init(void)
> > +{
> > + retrun EOPNOTSUPP;
>
> This should be -EOPNOTSUPP at least. I think -EINVAL might be better.
Yeah thanks, I'll also fix the TYPO of return.
>
> Cheers,
>
> Peter.
^ permalink raw reply [flat|nested] 20+ messages in thread* [PATCH 2/2] cpufreq: tegra: Re-model Tegra cpufreq driver
@ 2013-09-12 10:35 ` Bill Huang
0 siblings, 0 replies; 20+ messages in thread
From: Bill Huang @ 2013-09-12 10:35 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, 2013-09-12 at 18:14 +0800, Peter De Schrijver wrote:
> On Wed, Sep 11, 2013 at 01:19:14PM +0200, Bill Huang wrote:
>
> > +static inline int tegra_cpufreq_init(void)
> > +{
> > + retrun EOPNOTSUPP;
>
> This should be -EOPNOTSUPP at least. I think -EINVAL might be better.
Yeah thanks, I'll also fix the TYPO of return.
>
> Cheers,
>
> Peter.
^ permalink raw reply [flat|nested] 20+ messages in thread