From: Nishanth Menon <nm@ti.com>
To: Koen Kooi <koen@dominion.thruhere.net>
Cc: linux-kernel@vger.kernel.org, bcousson@baylibre.com,
tony@atomide.com, rob.herring@calxeda.com, pawel.moll@arm.com,
mark.rutland@arm.com, swarren@wwwdotorg.org,
ijc+devicetree@hellion.org.uk, linux@arm.linux.org.uk,
linux-omap@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 4/4] ARM: dts: am335x-bone-common: add cpu0 and mmc1 triggers
Date: Thu, 12 Sep 2013 11:20:00 -0500 [thread overview]
Message-ID: <5231E9B0.8060303@ti.com> (raw)
In-Reply-To: <1379000532-27376-5-git-send-email-koen@dominion.thruhere.net>
On 09/12/2013 10:42 AM, Koen Kooi wrote:
> This matches the vendor 3.8.x configuration that is shipping with the boards.
>
> The LED layout is now:
>
> USR0: heartbeat
> USR1: mmc0 (micro-SD slot)
> USR2: cpu0
> USR3: mmc1 (eMMC)
>
> The cpu0 triggers was put inbetween the mmc triggers to make is easier to see
nitpick: sinbetween/in between/
> where the disk activity is.
>
> Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
> ---
> arch/arm/boot/dts/am335x-bone-common.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
> index 80407ff..3057f30 100644
> --- a/arch/arm/boot/dts/am335x-bone-common.dtsi
> +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
> @@ -203,12 +203,14 @@
> led@4 {
> label = "beaglebone:green:usr2";
> gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "cpu0";
> default-state = "off";
> };
>
> led@5 {
> label = "beaglebone:green:usr3";
> gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "mmc1";
> default-state = "off";
> };
> };
>
--
Regards,
Nishanth Menon
WARNING: multiple messages have this Message-ID (diff)
From: nm@ti.com (Nishanth Menon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/4] ARM: dts: am335x-bone-common: add cpu0 and mmc1 triggers
Date: Thu, 12 Sep 2013 11:20:00 -0500 [thread overview]
Message-ID: <5231E9B0.8060303@ti.com> (raw)
In-Reply-To: <1379000532-27376-5-git-send-email-koen@dominion.thruhere.net>
On 09/12/2013 10:42 AM, Koen Kooi wrote:
> This matches the vendor 3.8.x configuration that is shipping with the boards.
>
> The LED layout is now:
>
> USR0: heartbeat
> USR1: mmc0 (micro-SD slot)
> USR2: cpu0
> USR3: mmc1 (eMMC)
>
> The cpu0 triggers was put inbetween the mmc triggers to make is easier to see
nitpick: sinbetween/in between/
> where the disk activity is.
>
> Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
> ---
> arch/arm/boot/dts/am335x-bone-common.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
> index 80407ff..3057f30 100644
> --- a/arch/arm/boot/dts/am335x-bone-common.dtsi
> +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
> @@ -203,12 +203,14 @@
> led at 4 {
> label = "beaglebone:green:usr2";
> gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "cpu0";
> default-state = "off";
> };
>
> led at 5 {
> label = "beaglebone:green:usr3";
> gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "mmc1";
> default-state = "off";
> };
> };
>
--
Regards,
Nishanth Menon
WARNING: multiple messages have this Message-ID (diff)
From: Nishanth Menon <nm@ti.com>
To: Koen Kooi <koen@dominion.thruhere.net>
Cc: <linux-kernel@vger.kernel.org>, <bcousson@baylibre.com>,
<tony@atomide.com>, <rob.herring@calxeda.com>,
<pawel.moll@arm.com>, <mark.rutland@arm.com>,
<swarren@wwwdotorg.org>, <ijc+devicetree@hellion.org.uk>,
<linux@arm.linux.org.uk>, <linux-omap@vger.kernel.org>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH 4/4] ARM: dts: am335x-bone-common: add cpu0 and mmc1 triggers
Date: Thu, 12 Sep 2013 11:20:00 -0500 [thread overview]
Message-ID: <5231E9B0.8060303@ti.com> (raw)
In-Reply-To: <1379000532-27376-5-git-send-email-koen@dominion.thruhere.net>
On 09/12/2013 10:42 AM, Koen Kooi wrote:
> This matches the vendor 3.8.x configuration that is shipping with the boards.
>
> The LED layout is now:
>
> USR0: heartbeat
> USR1: mmc0 (micro-SD slot)
> USR2: cpu0
> USR3: mmc1 (eMMC)
>
> The cpu0 triggers was put inbetween the mmc triggers to make is easier to see
nitpick: sinbetween/in between/
> where the disk activity is.
>
> Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
> ---
> arch/arm/boot/dts/am335x-bone-common.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
> index 80407ff..3057f30 100644
> --- a/arch/arm/boot/dts/am335x-bone-common.dtsi
> +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
> @@ -203,12 +203,14 @@
> led@4 {
> label = "beaglebone:green:usr2";
> gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "cpu0";
> default-state = "off";
> };
>
> led@5 {
> label = "beaglebone:green:usr3";
> gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "mmc1";
> default-state = "off";
> };
> };
>
--
Regards,
Nishanth Menon
next prev parent reply other threads:[~2013-09-12 16:20 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-12 15:42 [PATCHv3 0/2] ARM: dts: Beaglebone MMC fixes Koen Kooi
2013-09-12 15:42 ` Koen Kooi
2013-09-12 15:42 ` [PATCH 1/4] arm: bone: dts: add CD for mmc1 Koen Kooi
2013-09-12 15:42 ` Koen Kooi
2013-09-12 16:15 ` Nishanth Menon
2013-09-12 16:15 ` Nishanth Menon
2013-09-12 16:15 ` Nishanth Menon
2013-09-12 15:42 ` [PATCH 2/4] am335x-boneblack: add eMMC DT entry Koen Kooi
2013-09-12 15:42 ` Koen Kooi
2013-09-12 16:18 ` Nishanth Menon
2013-09-12 16:18 ` Nishanth Menon
2013-09-12 16:18 ` Nishanth Menon
2013-09-12 15:42 ` [PATCH 3/4] ARM: am335x-bone-common: switch mmc1 to 4-bit mode Koen Kooi
2013-09-12 15:42 ` Koen Kooi
2013-09-12 16:19 ` Nishanth Menon
2013-09-12 16:19 ` Nishanth Menon
2013-09-12 16:19 ` Nishanth Menon
2013-09-12 15:42 ` [PATCH 4/4] ARM: dts: am335x-bone-common: add cpu0 and mmc1 triggers Koen Kooi
2013-09-12 15:42 ` Koen Kooi
2013-09-12 16:20 ` Nishanth Menon [this message]
2013-09-12 16:20 ` Nishanth Menon
2013-09-12 16:20 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5231E9B0.8060303@ti.com \
--to=nm@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=koen@dominion.thruhere.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=rob.herring@calxeda.com \
--cc=swarren@wwwdotorg.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.