[ath9k-devel] Ath9k driver question

[C. McPherson <ccmcphe@verizon.net>]

Adrian:
Thanks so much for the information, that really helps me. I think I am 
SOL with at least the 9300's we have. I'll have to look for the 
Enterprise revisions.

Thanks Again
Clyde


On 09/11/2013 02:21 PM, Adrian Chadd wrote:
> Hi,
>
> The AR9300 introduced "enterprise features". I _think_ half/quarter 
> rate operation is one of those enterprise features. However, I don't 
> know if it's a software or a hardware enforced thing.
>
> If your NIC doesn't support the half/quarter rate enterprise feature 
> then I think you're SoL. You may have to try the Enterprise revisions 
> of the AR9300 series hardware.
>
>
>
> -adrian
>
>
>
> On 10 September 2013 11:49, C. McPherson <ccmcphe@verizon.net 
> <mailto:ccmcphe@verizon.net>> wrote:
>
>     ath9k developers:
>
>     I have a question concerning the 9300 chip sets running in TURBO
>     mode. I
>     have the 9280 running in Turbo/10Mhz and 5Mhz mode and I have our
>     9300's
>     running in 10Mhz and 5Mhz, but when I try to put them in Turbo mode it
>     will not happen. Does anyone know if Atheros/Qualcom dropped
>     support for
>     Turbo mode on the 9300's? What I'm doing is setting the
>     AR_PHY_GEN_CTRL
>     with (AR_PHY_GC_TURBO_MODE|AR_PHY_GC_TURBO_SHORT).
>
>     Thanks much
>     Clyde
>     _______________________________________________
>     ath9k-devel mailing list
>     ath9k-devel at lists.ath9k.org <mailto:ath9k-devel@lists.ath9k.org>
>     https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20130912/96ffa82b/attachment.htm