From: Steve Cookson <it@sca-uk.com>
To: linux-media@vger.kernel.org
Subject: Hauppauge ImpactVCB-e 01381 PCIe driver resolution.
Date: Sun, 15 Sep 2013 12:14:32 -0300 [thread overview]
Message-ID: <5235CED8.3080804@sca-uk.com> (raw)
Hi Guys,
I seem to be having immense difficulty getting the Hauppauge ImpactVCB-e
01381 PCIe card working on Linux (I'm using Kubuntu 13.04) with greater
than 320x240 resolution.
This is what I've done:
lspci recognises the card but only as a Conexant card (Vendor ID =
14f1:8852), not Hauppauge card (Vendor ID = 0070). Hauppauge is shown
as the subsystem (0070:7133). I don't really know what this means.
lsmod returns nothing related to the card.
dmesg | grep cx23885 suggested card=<n> insmod option (full output from
dmesg below). So I did:
echo cx23885 card=5 | sudo tee -a /etc/modules
So I tried a few version numbers, but they all give me 320x240 in
s-video or composite mode.
If I use a Pinnacle Dazzle, I get perfect 640x480 for about the same
price. But I need an internal PCIe card, rather than a external card/box.
How can I add the card to video4Linux?
Any help much appreciated.
Regards
Steve
8.921332] cx23885 driver version 0.0.3 loaded
[ 8.921390] cx23885[0]: Your board isn't known (yet) to the driver.
[ 8.921390] cx23885[0]: Try to pick one of the existing card configs via
[ 8.921390] cx23885[0]: card=<n> insmod option. Updating to the latest
[ 8.921390] cx23885[0]: version might help as well.
[ 8.921393] cx23885[0]: Here is a list of valid choices for the
card=<n> insmod option:
[ 8.921395] cx23885[0]: card=0 -> UNKNOWN/GENERIC
[ 8.921396] cx23885[0]: card=1 -> Hauppauge WinTV-HVR1800lp
[ 8.921397] cx23885[0]: card=2 -> Hauppauge WinTV-HVR1800
[ 8.921398] cx23885[0]: card=3 -> Hauppauge WinTV-HVR1250
[ 8.921399] cx23885[0]: card=4 -> DViCO FusionHDTV5 Express
[ 8.921400] cx23885[0]: card=5 -> Hauppauge WinTV-HVR1500Q
[ 8.921401] cx23885[0]: card=6 -> Hauppauge WinTV-HVR1500
[ 8.921402] cx23885[0]: card=7 -> Hauppauge WinTV-HVR1200
[ 8.921403] cx23885[0]: card=8 -> Hauppauge WinTV-HVR1700
[ 8.921404] cx23885[0]: card=9 -> Hauppauge WinTV-HVR1400
[ 8.921405] cx23885[0]: card=10 -> DViCO FusionHDTV7 Dual Express
[ 8.921406] cx23885[0]: card=11 -> DViCO FusionHDTV DVB-T Dual
Express
[ 8.921407] cx23885[0]: card=12 -> Leadtek Winfast PxDVR3200 H
[ 8.921408] cx23885[0]: card=13 -> Compro VideoMate E650F
[ 8.921409] cx23885[0]: card=14 -> TurboSight TBS 6920
[ 8.921410] cx23885[0]: card=15 -> TeVii S470
[ 8.921411] cx23885[0]: card=16 -> DVBWorld DVB-S2 2005
[ 8.921412] cx23885[0]: card=17 -> NetUP Dual DVB-S2 CI
[ 8.921413] cx23885[0]: card=18 -> Hauppauge WinTV-HVR1270
[ 8.921414] cx23885[0]: card=19 -> Hauppauge WinTV-HVR1275
[ 8.921415] cx23885[0]: card=20 -> Hauppauge WinTV-HVR1255
[ 8.921416] cx23885[0]: card=21 -> Hauppauge WinTV-HVR1210
[ 8.921417] cx23885[0]: card=22 -> Mygica X8506 DMB-TH
[ 8.921418] cx23885[0]: card=23 -> Magic-Pro ProHDTV Extreme 2
[ 8.921419] cx23885[0]: card=24 -> Hauppauge WinTV-HVR1850
[ 8.921420] cx23885[0]: card=25 -> Compro VideoMate E800
[ 8.921421] cx23885[0]: card=26 -> Hauppauge WinTV-HVR1290
[ 8.921422] cx23885[0]: card=27 -> Mygica X8558 PRO DMB-TH
[ 8.921424] cx23885[0]: card=28 -> LEADTEK WinFast PxTV1200
[ 8.921425] cx23885[0]: card=29 -> GoTView X5 3D Hybrid
[ 8.921426] cx23885[0]: card=30 -> NetUP Dual DVB-T/C-CI RF
[ 8.921427] cx23885[0]: card=31 -> Leadtek Winfast PxDVR3200 H XC4000
[ 8.921428] cx23885[0]: card=32 -> MPX-885
[ 8.921429] cx23885[0]: card=33 -> Mygica X8502/X8507 ISDB-T
[ 8.921430] cx23885[0]: card=34 -> TerraTec Cinergy T PCIe Dual
[ 8.921431] cx23885[0]: card=35 -> TeVii S471
[ 8.921432] cx23885[0]: card=36 -> Hauppauge WinTV-HVR1255
[ 8.921433] cx23885[0]: card=37 -> Prof Revolution DVB-S2 8000
[ 8.921434] cx23885[0]: card=38 -> Hauppauge WinTV-HVR4400
[ 8.921435] cx23885[0]: card=39 -> AVerTV Hybrid Express Slim HC81R
[ 8.921526] CORE cx23885[0]: subsystem: 0070:7133, board:
UNKNOWN/GENERIC [card=0,autodetected]
[ 9.047515] cx23885_dev_checkrevision() Hardware revision = 0xa5
[ 9.047518] cx23885[0]/0: found at 0000:03:00.0, rev: 4, irq: 18,
latency: 0, mmio: 0xfbe00000
next reply other threads:[~2013-09-15 15:35 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-15 15:14 Steve Cookson [this message]
[not found] ` <CAGoCfiyuvXAhBS=n=_3bZKnCSTZYMrHFJ73MfRnoiuW44Y=zKg@mail.gmail.com>
2013-09-16 17:33 ` Hauppauge ImpactVCB-e 01381 PCIe driver resolution Steve Cookson
[not found] ` <52363EA6.7060402@sca-uk.com>
2013-09-16 17:38 ` Devin Heitmueller
2013-09-16 19:13 ` Steve Cookson
2013-09-16 22:04 ` Devin Heitmueller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5235CED8.3080804@sca-uk.com \
--to=it@sca-uk.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.