* Re: [PATCH] ARM: at91/at91-pinctrl documentation: add missing sam9x5 compatible string
@ 2013-08-27 14:57 ` Nicolas Ferre
0 siblings, 0 replies; 11+ messages in thread
From: Nicolas Ferre @ 2013-08-27 14:57 UTC (permalink / raw)
To: Boris BREZILLON
Cc: Rob Herring, Pawel Moll, Mark Rutland, Stephen Warren,
Ian Campbell, Rob Landley, Jean-Christophe PLAGNIOL-VILLARD,
Richard Genoud, Jiri Kosina, devicetree, linux-doc, linux-kernel,
linux-arm-kernel
On 27/08/2013 15:26, Boris BREZILLON :
> Add missing "atmel,at91sam9x5-pinctrl" compatible string to the
> documentation.
>
> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> ---
> .../bindings/pinctrl/atmel,at91-pinctrl.txt | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
> index 648d60e..cf7c7bc 100644
> --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
> @@ -18,7 +18,7 @@ mode) this pin can work on and the 'config' configures various pad settings
> such as pull-up, multi drive, etc.
>
> Required properties for iomux controller:
> -- compatible: "atmel,at91rm9200-pinctrl"
> +- compatible: "atmel,at91rm9200-pinctrl" or "atmel,at91sam9x5-pinctrl"
> - atmel,mux-mask: array of mask (periph per bank) to describe if a pin can be
> configured in this periph mode. All the periph and bank need to be describe.
>
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] ARM: at91/at91-pinctrl documentation: add missing sam9x5 compatible string
@ 2013-08-27 14:57 ` Nicolas Ferre
0 siblings, 0 replies; 11+ messages in thread
From: Nicolas Ferre @ 2013-08-27 14:57 UTC (permalink / raw)
To: Boris BREZILLON
Cc: Rob Herring, Pawel Moll, Mark Rutland, Stephen Warren,
Ian Campbell, Rob Landley, Jean-Christophe PLAGNIOL-VILLARD,
Richard Genoud, Jiri Kosina, devicetree, linux-doc, linux-kernel,
linux-arm-kernel
On 27/08/2013 15:26, Boris BREZILLON :
> Add missing "atmel,at91sam9x5-pinctrl" compatible string to the
> documentation.
>
> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> ---
> .../bindings/pinctrl/atmel,at91-pinctrl.txt | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
> index 648d60e..cf7c7bc 100644
> --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
> @@ -18,7 +18,7 @@ mode) this pin can work on and the 'config' configures various pad settings
> such as pull-up, multi drive, etc.
>
> Required properties for iomux controller:
> -- compatible: "atmel,at91rm9200-pinctrl"
> +- compatible: "atmel,at91rm9200-pinctrl" or "atmel,at91sam9x5-pinctrl"
> - atmel,mux-mask: array of mask (periph per bank) to describe if a pin can be
> configured in this periph mode. All the periph and bank need to be describe.
>
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH] ARM: at91/at91-pinctrl documentation: add missing sam9x5 compatible string
2013-08-27 14:57 ` Nicolas Ferre
(?)
@ 2013-09-19 14:05 ` Nicolas Ferre
-1 siblings, 0 replies; 11+ messages in thread
From: Nicolas Ferre @ 2013-09-19 14:05 UTC (permalink / raw)
To: linux-arm-kernel
On 27/08/2013 16:57, Nicolas Ferre :
> On 27/08/2013 15:26, Boris BREZILLON :
>> Add missing "atmel,at91sam9x5-pinctrl" compatible string to the
>> documentation.
>>
>> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
>
> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Linus, it seems that you were not in copy of the original email.
Anyway, do you want that I re-send to you or you can pick it on patchwork?
Here it is:
https://patchwork.kernel.org/patch/2850188/
>> ---
>> .../bindings/pinctrl/atmel,at91-pinctrl.txt | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
>> index 648d60e..cf7c7bc 100644
>> --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
>> +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
>> @@ -18,7 +18,7 @@ mode) this pin can work on and the 'config' configures various pad settings
>> such as pull-up, multi drive, etc.
>>
>> Required properties for iomux controller:
>> -- compatible: "atmel,at91rm9200-pinctrl"
>> +- compatible: "atmel,at91rm9200-pinctrl" or "atmel,at91sam9x5-pinctrl"
>> - atmel,mux-mask: array of mask (periph per bank) to describe if a pin can be
>> configured in this periph mode. All the periph and bank need to be describe.
>>
>>
>
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] ARM: at91/at91-pinctrl documentation: add missing sam9x5 compatible string
@ 2013-09-19 14:05 ` Nicolas Ferre
0 siblings, 0 replies; 11+ messages in thread
From: Nicolas Ferre @ 2013-09-19 14:05 UTC (permalink / raw)
To: Linus Walleij
Cc: Nicolas Ferre, Boris BREZILLON, Mark Rutland, devicetree,
Ian Campbell, Pawel Moll, Stephen Warren, Richard Genoud,
Jiri Kosina, linux-doc, linux-kernel, Rob Herring, Rob Landley,
Jean-Christophe PLAGNIOL-VILLARD, linux-arm-kernel
On 27/08/2013 16:57, Nicolas Ferre :
> On 27/08/2013 15:26, Boris BREZILLON :
>> Add missing "atmel,at91sam9x5-pinctrl" compatible string to the
>> documentation.
>>
>> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
>
> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Linus, it seems that you were not in copy of the original email.
Anyway, do you want that I re-send to you or you can pick it on patchwork?
Here it is:
https://patchwork.kernel.org/patch/2850188/
>> ---
>> .../bindings/pinctrl/atmel,at91-pinctrl.txt | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
>> index 648d60e..cf7c7bc 100644
>> --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
>> +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
>> @@ -18,7 +18,7 @@ mode) this pin can work on and the 'config' configures various pad settings
>> such as pull-up, multi drive, etc.
>>
>> Required properties for iomux controller:
>> -- compatible: "atmel,at91rm9200-pinctrl"
>> +- compatible: "atmel,at91rm9200-pinctrl" or "atmel,at91sam9x5-pinctrl"
>> - atmel,mux-mask: array of mask (periph per bank) to describe if a pin can be
>> configured in this periph mode. All the periph and bank need to be describe.
>>
>>
>
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] ARM: at91/at91-pinctrl documentation: add missing sam9x5 compatible string
@ 2013-09-19 14:05 ` Nicolas Ferre
0 siblings, 0 replies; 11+ messages in thread
From: Nicolas Ferre @ 2013-09-19 14:05 UTC (permalink / raw)
To: Linus Walleij
Cc: Nicolas Ferre, Boris BREZILLON, Mark Rutland, devicetree,
Ian Campbell, Pawel Moll, Stephen Warren, Richard Genoud,
Jiri Kosina, linux-doc, linux-kernel, Rob Herring, Rob Landley,
Jean-Christophe PLAGNIOL-VILLARD, linux-arm-kernel
On 27/08/2013 16:57, Nicolas Ferre :
> On 27/08/2013 15:26, Boris BREZILLON :
>> Add missing "atmel,at91sam9x5-pinctrl" compatible string to the
>> documentation.
>>
>> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
>
> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Linus, it seems that you were not in copy of the original email.
Anyway, do you want that I re-send to you or you can pick it on patchwork?
Here it is:
https://patchwork.kernel.org/patch/2850188/
>> ---
>> .../bindings/pinctrl/atmel,at91-pinctrl.txt | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
>> index 648d60e..cf7c7bc 100644
>> --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
>> +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
>> @@ -18,7 +18,7 @@ mode) this pin can work on and the 'config' configures various pad settings
>> such as pull-up, multi drive, etc.
>>
>> Required properties for iomux controller:
>> -- compatible: "atmel,at91rm9200-pinctrl"
>> +- compatible: "atmel,at91rm9200-pinctrl" or "atmel,at91sam9x5-pinctrl"
>> - atmel,mux-mask: array of mask (periph per bank) to describe if a pin can be
>> configured in this periph mode. All the periph and bank need to be describe.
>>
>>
>
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 11+ messages in thread