* [PATCH 0/2] ARM: dts: dra7-evm: add support for sd, eMMC @ 2013-08-26 13:53 ` Balaji T K 0 siblings, 0 replies; 14+ messages in thread From: Balaji T K @ 2013-08-26 13:53 UTC (permalink / raw) To: bcousson, devicetree; +Cc: tony, nm, linux-omap, Balaji T K, linux-arm-kernel Add mmc1, mmc2 dt node to dra7-evm Balaji T K (2): ARM: dts: dra7-evm: Add mmc1 node for micro-sd support ARM: dts: dra7-evm: Add mmc2 node for eMMC support arch/arm/boot/dts/dra7-evm.dts | 20 ++++++++++++++++++++ 1 files changed, 20 insertions(+), 0 deletions(-) -- 1.7.5.4 ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 0/2] ARM: dts: dra7-evm: add support for sd, eMMC @ 2013-08-26 13:53 ` Balaji T K 0 siblings, 0 replies; 14+ messages in thread From: Balaji T K @ 2013-08-26 13:53 UTC (permalink / raw) To: linux-arm-kernel Add mmc1, mmc2 dt node to dra7-evm Balaji T K (2): ARM: dts: dra7-evm: Add mmc1 node for micro-sd support ARM: dts: dra7-evm: Add mmc2 node for eMMC support arch/arm/boot/dts/dra7-evm.dts | 20 ++++++++++++++++++++ 1 files changed, 20 insertions(+), 0 deletions(-) -- 1.7.5.4 ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 1/2] ARM: dts: dra7-evm: Add mmc1 node for micro-sd support 2013-08-26 13:53 ` Balaji T K @ 2013-08-26 13:53 ` Balaji T K -1 siblings, 0 replies; 14+ messages in thread From: Balaji T K @ 2013-08-26 13:53 UTC (permalink / raw) To: bcousson, devicetree; +Cc: linux-omap, tony, linux-arm-kernel, nm, Balaji T K Add mmc1 dt node to dra7-evm board. Input for ldo1 regulator is controlled by gpio 5 of pcf8575 chip (0x21) on i2c1 bus. When dt support for gpio-pcf857x is available, input supply will be modelled as cascaded regulator. Signed-off-by: Balaji T K <balajitk@ti.com> --- Patch has dependency on [1] for ldo1_reg [1] [PATCH] ARM: DTS: DRA7: Add TPS659038 PMIC nodes https://lkml.org/lkml/2013/8/26/21 arch/arm/boot/dts/dra7-evm.dts | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 32f8534..a59bbd0 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -251,3 +251,9 @@ pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; + +&mmc1 { + status = "okay"; + vmmc-supply = <&ldo1_reg>; + bus-width = <4>; +}; -- 1.7.5.4 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 1/2] ARM: dts: dra7-evm: Add mmc1 node for micro-sd support @ 2013-08-26 13:53 ` Balaji T K 0 siblings, 0 replies; 14+ messages in thread From: Balaji T K @ 2013-08-26 13:53 UTC (permalink / raw) To: linux-arm-kernel Add mmc1 dt node to dra7-evm board. Input for ldo1 regulator is controlled by gpio 5 of pcf8575 chip (0x21) on i2c1 bus. When dt support for gpio-pcf857x is available, input supply will be modelled as cascaded regulator. Signed-off-by: Balaji T K <balajitk@ti.com> --- Patch has dependency on [1] for ldo1_reg [1] [PATCH] ARM: DTS: DRA7: Add TPS659038 PMIC nodes https://lkml.org/lkml/2013/8/26/21 arch/arm/boot/dts/dra7-evm.dts | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 32f8534..a59bbd0 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -251,3 +251,9 @@ pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; + +&mmc1 { + status = "okay"; + vmmc-supply = <&ldo1_reg>; + bus-width = <4>; +}; -- 1.7.5.4 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support 2013-08-26 13:53 ` Balaji T K @ 2013-08-26 13:53 ` Balaji T K -1 siblings, 0 replies; 14+ messages in thread From: Balaji T K @ 2013-08-26 13:53 UTC (permalink / raw) To: bcousson, devicetree; +Cc: linux-omap, tony, linux-arm-kernel, nm, Balaji T K Add mmc2 dt node to dra7-evm board and model eMMC vcc as fixed regulator. Signed-off-by: Balaji T K <balajitk@ti.com> --- arch/arm/boot/dts/dra7-evm.dts | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index a59bbd0..2062724 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -17,6 +17,13 @@ device_type = "memory"; reg = <0x80000000 0x60000000>; /* 1536 MB */ }; + + mmc2_3v3: fixedregulator-mmc2 { + compatible = "regulator-fixed"; + regulator-name = "mmc2_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &dra7_pmx_core { @@ -257,3 +264,10 @@ vmmc-supply = <&ldo1_reg>; bus-width = <4>; }; + +&mmc2 { + status = "okay"; + vmmc-supply = <&mmc2_3v3>; + bus-width = <8>; + ti,non-removable; +}; -- 1.7.5.4 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support @ 2013-08-26 13:53 ` Balaji T K 0 siblings, 0 replies; 14+ messages in thread From: Balaji T K @ 2013-08-26 13:53 UTC (permalink / raw) To: linux-arm-kernel Add mmc2 dt node to dra7-evm board and model eMMC vcc as fixed regulator. Signed-off-by: Balaji T K <balajitk@ti.com> --- arch/arm/boot/dts/dra7-evm.dts | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index a59bbd0..2062724 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -17,6 +17,13 @@ device_type = "memory"; reg = <0x80000000 0x60000000>; /* 1536 MB */ }; + + mmc2_3v3: fixedregulator-mmc2 { + compatible = "regulator-fixed"; + regulator-name = "mmc2_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &dra7_pmx_core { @@ -257,3 +264,10 @@ vmmc-supply = <&ldo1_reg>; bus-width = <4>; }; + +&mmc2 { + status = "okay"; + vmmc-supply = <&mmc2_3v3>; + bus-width = <8>; + ti,non-removable; +}; -- 1.7.5.4 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support 2013-08-26 13:53 ` Balaji T K @ 2013-09-24 9:41 ` Benoit Cousson -1 siblings, 0 replies; 14+ messages in thread From: Benoit Cousson @ 2013-09-24 9:41 UTC (permalink / raw) To: Balaji T K Cc: devicetree, linux-omap, tony, linux-arm-kernel, nm, Sekhar Nori + Sekhar Hi Balaji, On 26/08/2013 15:53, Balaji T K wrote: > Add mmc2 dt node to dra7-evm board > and model eMMC vcc as fixed regulator. > > Signed-off-by: Balaji T K <balajitk@ti.com> > --- > arch/arm/boot/dts/dra7-evm.dts | 14 ++++++++++++++ > 1 files changed, 14 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts > index a59bbd0..2062724 100644 > --- a/arch/arm/boot/dts/dra7-evm.dts > +++ b/arch/arm/boot/dts/dra7-evm.dts > @@ -17,6 +17,13 @@ > device_type = "memory"; > reg = <0x80000000 0x60000000>; /* 1536 MB */ > }; > + > + mmc2_3v3: fixedregulator-mmc2 { > + compatible = "regulator-fixed"; > + regulator-name = "mmc2_3v3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > }; > > &dra7_pmx_core { > @@ -257,3 +264,10 @@ > vmmc-supply = <&ldo1_reg>; > bus-width = <4>; > }; > + > +&mmc2 { > + status = "okay"; > + vmmc-supply = <&mmc2_3v3>; > + bus-width = <8>; > + ti,non-removable; Sekhar just posted a series to replace that with a non-TI attribute: non-removable. I'm not sure if this got merged, but it might be good to use the standard attribute instead. Regards, Benoit ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support @ 2013-09-24 9:41 ` Benoit Cousson 0 siblings, 0 replies; 14+ messages in thread From: Benoit Cousson @ 2013-09-24 9:41 UTC (permalink / raw) To: linux-arm-kernel + Sekhar Hi Balaji, On 26/08/2013 15:53, Balaji T K wrote: > Add mmc2 dt node to dra7-evm board > and model eMMC vcc as fixed regulator. > > Signed-off-by: Balaji T K <balajitk@ti.com> > --- > arch/arm/boot/dts/dra7-evm.dts | 14 ++++++++++++++ > 1 files changed, 14 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts > index a59bbd0..2062724 100644 > --- a/arch/arm/boot/dts/dra7-evm.dts > +++ b/arch/arm/boot/dts/dra7-evm.dts > @@ -17,6 +17,13 @@ > device_type = "memory"; > reg = <0x80000000 0x60000000>; /* 1536 MB */ > }; > + > + mmc2_3v3: fixedregulator-mmc2 { > + compatible = "regulator-fixed"; > + regulator-name = "mmc2_3v3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > }; > > &dra7_pmx_core { > @@ -257,3 +264,10 @@ > vmmc-supply = <&ldo1_reg>; > bus-width = <4>; > }; > + > +&mmc2 { > + status = "okay"; > + vmmc-supply = <&mmc2_3v3>; > + bus-width = <8>; > + ti,non-removable; Sekhar just posted a series to replace that with a non-TI attribute: non-removable. I'm not sure if this got merged, but it might be good to use the standard attribute instead. Regards, Benoit ^ permalink raw reply [flat|nested] 14+ messages in thread
[parent not found: <52415E41.7050301-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>]
* Re: [PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support 2013-09-24 9:41 ` Benoit Cousson @ 2013-09-25 16:17 ` Balaji T K -1 siblings, 0 replies; 14+ messages in thread From: Balaji T K @ 2013-09-25 16:17 UTC (permalink / raw) To: Benoit Cousson Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, linux-omap-u79uwXL29TY76Z2rM5mHXA, tony-4v6yS6AI5VpBDgjK7y7TUQ, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, nm-l0cyMroinI0, Sekhar Nori On Tuesday 24 September 2013 03:11 PM, Benoit Cousson wrote: > + Sekhar > > Hi Balaji, > > On 26/08/2013 15:53, Balaji T K wrote: >> Add mmc2 dt node to dra7-evm board >> and model eMMC vcc as fixed regulator. >> >> Signed-off-by: Balaji T K <balajitk-l0cyMroinI0@public.gmane.org> >> --- >> arch/arm/boot/dts/dra7-evm.dts | 14 ++++++++++++++ >> 1 files changed, 14 insertions(+), 0 deletions(-) >> >> diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts >> index a59bbd0..2062724 100644 >> --- a/arch/arm/boot/dts/dra7-evm.dts >> +++ b/arch/arm/boot/dts/dra7-evm.dts >> @@ -17,6 +17,13 @@ >> device_type = "memory"; >> reg = <0x80000000 0x60000000>; /* 1536 MB */ >> }; >> + >> + mmc2_3v3: fixedregulator-mmc2 { >> + compatible = "regulator-fixed"; >> + regulator-name = "mmc2_3v3"; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <3300000>; >> + }; >> }; >> >> &dra7_pmx_core { >> @@ -257,3 +264,10 @@ >> vmmc-supply = <&ldo1_reg>; >> bus-width = <4>; >> }; >> + >> +&mmc2 { >> + status = "okay"; >> + vmmc-supply = <&mmc2_3v3>; >> + bus-width = <8>; >> + ti,non-removable; > > Sekhar just posted a series to replace that with a non-TI attribute: non-removable. > > I'm not sure if this got merged, but it might be good to use the standard attribute instead. Hi Benoit, Those patches are not merged yet, standard attribute is good, but few cleanups are needed before ti,non-removable can be replaced by standard non-removable, no_regulator_off_init flag set under ti,non-removable is needed to detect eMMC during boot on OMAP4 devices to keep regulator ON during init. Given that eMMC on dra7-evm is powered by always ON regulator, ti,non-removable and standard attribute will behave same way. Let me know if you want to remove ti,non-removable attribute from this patch. > > Regards, > Benoit -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support @ 2013-09-25 16:17 ` Balaji T K 0 siblings, 0 replies; 14+ messages in thread From: Balaji T K @ 2013-09-25 16:17 UTC (permalink / raw) To: linux-arm-kernel On Tuesday 24 September 2013 03:11 PM, Benoit Cousson wrote: > + Sekhar > > Hi Balaji, > > On 26/08/2013 15:53, Balaji T K wrote: >> Add mmc2 dt node to dra7-evm board >> and model eMMC vcc as fixed regulator. >> >> Signed-off-by: Balaji T K <balajitk@ti.com> >> --- >> arch/arm/boot/dts/dra7-evm.dts | 14 ++++++++++++++ >> 1 files changed, 14 insertions(+), 0 deletions(-) >> >> diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts >> index a59bbd0..2062724 100644 >> --- a/arch/arm/boot/dts/dra7-evm.dts >> +++ b/arch/arm/boot/dts/dra7-evm.dts >> @@ -17,6 +17,13 @@ >> device_type = "memory"; >> reg = <0x80000000 0x60000000>; /* 1536 MB */ >> }; >> + >> + mmc2_3v3: fixedregulator-mmc2 { >> + compatible = "regulator-fixed"; >> + regulator-name = "mmc2_3v3"; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <3300000>; >> + }; >> }; >> >> &dra7_pmx_core { >> @@ -257,3 +264,10 @@ >> vmmc-supply = <&ldo1_reg>; >> bus-width = <4>; >> }; >> + >> +&mmc2 { >> + status = "okay"; >> + vmmc-supply = <&mmc2_3v3>; >> + bus-width = <8>; >> + ti,non-removable; > > Sekhar just posted a series to replace that with a non-TI attribute: non-removable. > > I'm not sure if this got merged, but it might be good to use the standard attribute instead. Hi Benoit, Those patches are not merged yet, standard attribute is good, but few cleanups are needed before ti,non-removable can be replaced by standard non-removable, no_regulator_off_init flag set under ti,non-removable is needed to detect eMMC during boot on OMAP4 devices to keep regulator ON during init. Given that eMMC on dra7-evm is powered by always ON regulator, ti,non-removable and standard attribute will behave same way. Let me know if you want to remove ti,non-removable attribute from this patch. > > Regards, > Benoit ^ permalink raw reply [flat|nested] 14+ messages in thread
[parent not found: <52430C8A.6040404-l0cyMroinI0@public.gmane.org>]
* Re: [PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support 2013-09-25 16:17 ` Balaji T K @ 2013-09-27 7:58 ` Sekhar Nori -1 siblings, 0 replies; 14+ messages in thread From: Sekhar Nori @ 2013-09-27 7:58 UTC (permalink / raw) To: Balaji T K Cc: Benoit Cousson, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-omap-u79uwXL29TY76Z2rM5mHXA, tony-4v6yS6AI5VpBDgjK7y7TUQ, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, nm-l0cyMroinI0 On 9/25/2013 9:47 PM, Balaji T K wrote: > On Tuesday 24 September 2013 03:11 PM, Benoit Cousson wrote: >> + Sekhar >> >> Hi Balaji, >> >> On 26/08/2013 15:53, Balaji T K wrote: >>> Add mmc2 dt node to dra7-evm board >>> and model eMMC vcc as fixed regulator. >>> >>> Signed-off-by: Balaji T K <balajitk-l0cyMroinI0@public.gmane.org> >>> --- >>> arch/arm/boot/dts/dra7-evm.dts | 14 ++++++++++++++ >>> 1 files changed, 14 insertions(+), 0 deletions(-) >>> >>> diff --git a/arch/arm/boot/dts/dra7-evm.dts >>> b/arch/arm/boot/dts/dra7-evm.dts >>> index a59bbd0..2062724 100644 >>> --- a/arch/arm/boot/dts/dra7-evm.dts >>> +++ b/arch/arm/boot/dts/dra7-evm.dts >>> @@ -17,6 +17,13 @@ >>> device_type = "memory"; >>> reg = <0x80000000 0x60000000>; /* 1536 MB */ >>> }; >>> + >>> + mmc2_3v3: fixedregulator-mmc2 { >>> + compatible = "regulator-fixed"; >>> + regulator-name = "mmc2_3v3"; >>> + regulator-min-microvolt = <3300000>; >>> + regulator-max-microvolt = <3300000>; >>> + }; >>> }; >>> >>> &dra7_pmx_core { >>> @@ -257,3 +264,10 @@ >>> vmmc-supply = <&ldo1_reg>; >>> bus-width = <4>; >>> }; >>> + >>> +&mmc2 { >>> + status = "okay"; >>> + vmmc-supply = <&mmc2_3v3>; >>> + bus-width = <8>; >>> + ti,non-removable; >> >> Sekhar just posted a series to replace that with a non-TI attribute: >> non-removable. >> >> I'm not sure if this got merged, but it might be good to use the >> standard attribute instead. > > Hi Benoit, > > Those patches are not merged yet, standard attribute is good, but few > cleanups are needed > before ti,non-removable can be replaced by standard non-removable, > no_regulator_off_init flag set under ti,non-removable is needed to > detect eMMC > during boot on OMAP4 devices to keep regulator ON during init. Given > that eMMC on dra7-evm > is powered by always ON regulator, ti,non-removable and standard > attribute will behave same > way. Let me know if you want to remove ti,non-removable attribute from > this patch. I dont think its an issue if ti,non-removable and non-removable behave exactly the same. In fact, it will be confusing if they behave differently. I understand there is a need to clean-up the code around no_regulator_off_init, but I am hoping that can be kept separate from moving to a generic binding. The two clean-ups can be done independent of each other. Thanks, Sekhar -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support @ 2013-09-27 7:58 ` Sekhar Nori 0 siblings, 0 replies; 14+ messages in thread From: Sekhar Nori @ 2013-09-27 7:58 UTC (permalink / raw) To: linux-arm-kernel On 9/25/2013 9:47 PM, Balaji T K wrote: > On Tuesday 24 September 2013 03:11 PM, Benoit Cousson wrote: >> + Sekhar >> >> Hi Balaji, >> >> On 26/08/2013 15:53, Balaji T K wrote: >>> Add mmc2 dt node to dra7-evm board >>> and model eMMC vcc as fixed regulator. >>> >>> Signed-off-by: Balaji T K <balajitk@ti.com> >>> --- >>> arch/arm/boot/dts/dra7-evm.dts | 14 ++++++++++++++ >>> 1 files changed, 14 insertions(+), 0 deletions(-) >>> >>> diff --git a/arch/arm/boot/dts/dra7-evm.dts >>> b/arch/arm/boot/dts/dra7-evm.dts >>> index a59bbd0..2062724 100644 >>> --- a/arch/arm/boot/dts/dra7-evm.dts >>> +++ b/arch/arm/boot/dts/dra7-evm.dts >>> @@ -17,6 +17,13 @@ >>> device_type = "memory"; >>> reg = <0x80000000 0x60000000>; /* 1536 MB */ >>> }; >>> + >>> + mmc2_3v3: fixedregulator-mmc2 { >>> + compatible = "regulator-fixed"; >>> + regulator-name = "mmc2_3v3"; >>> + regulator-min-microvolt = <3300000>; >>> + regulator-max-microvolt = <3300000>; >>> + }; >>> }; >>> >>> &dra7_pmx_core { >>> @@ -257,3 +264,10 @@ >>> vmmc-supply = <&ldo1_reg>; >>> bus-width = <4>; >>> }; >>> + >>> +&mmc2 { >>> + status = "okay"; >>> + vmmc-supply = <&mmc2_3v3>; >>> + bus-width = <8>; >>> + ti,non-removable; >> >> Sekhar just posted a series to replace that with a non-TI attribute: >> non-removable. >> >> I'm not sure if this got merged, but it might be good to use the >> standard attribute instead. > > Hi Benoit, > > Those patches are not merged yet, standard attribute is good, but few > cleanups are needed > before ti,non-removable can be replaced by standard non-removable, > no_regulator_off_init flag set under ti,non-removable is needed to > detect eMMC > during boot on OMAP4 devices to keep regulator ON during init. Given > that eMMC on dra7-evm > is powered by always ON regulator, ti,non-removable and standard > attribute will behave same > way. Let me know if you want to remove ti,non-removable attribute from > this patch. I dont think its an issue if ti,non-removable and non-removable behave exactly the same. In fact, it will be confusing if they behave differently. I understand there is a need to clean-up the code around no_regulator_off_init, but I am hoping that can be kept separate from moving to a generic binding. The two clean-ups can be done independent of each other. Thanks, Sekhar ^ permalink raw reply [flat|nested] 14+ messages in thread
[parent not found: <1377525218-7655-1-git-send-email-balajitk-l0cyMroinI0@public.gmane.org>]
* Re: [PATCH 0/2] ARM: dts: dra7-evm: add support for sd, eMMC 2013-08-26 13:53 ` Balaji T K @ 2013-09-19 15:20 ` Nishanth Menon -1 siblings, 0 replies; 14+ messages in thread From: Nishanth Menon @ 2013-09-19 15:20 UTC (permalink / raw) To: Balaji T K, bcousson-rdvid1DuHRBWk0Htik3J/w, devicetree-u79uwXL29TY76Z2rM5mHXA Cc: linux-omap-u79uwXL29TY76Z2rM5mHXA, tony-4v6yS6AI5VpBDgjK7y7TUQ, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r On 08/26/2013 08:53 AM, Balaji T K wrote: > Add mmc1, mmc2 dt node to dra7-evm > > Balaji T K (2): > ARM: dts: dra7-evm: Add mmc1 node for micro-sd support > ARM: dts: dra7-evm: Add mmc2 node for eMMC support > > arch/arm/boot/dts/dra7-evm.dts | 20 ++++++++++++++++++++ > 1 files changed, 20 insertions(+), 0 deletions(-) > Series: Acked-by: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org> Thanks. this is needed for MMC boot on DRA7 evm. -- Regards, Nishanth Menon -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 0/2] ARM: dts: dra7-evm: add support for sd, eMMC @ 2013-09-19 15:20 ` Nishanth Menon 0 siblings, 0 replies; 14+ messages in thread From: Nishanth Menon @ 2013-09-19 15:20 UTC (permalink / raw) To: linux-arm-kernel On 08/26/2013 08:53 AM, Balaji T K wrote: > Add mmc1, mmc2 dt node to dra7-evm > > Balaji T K (2): > ARM: dts: dra7-evm: Add mmc1 node for micro-sd support > ARM: dts: dra7-evm: Add mmc2 node for eMMC support > > arch/arm/boot/dts/dra7-evm.dts | 20 ++++++++++++++++++++ > 1 files changed, 20 insertions(+), 0 deletions(-) > Series: Acked-by: Nishanth Menon <nm@ti.com> Thanks. this is needed for MMC boot on DRA7 evm. -- Regards, Nishanth Menon ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2013-09-27 7:58 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-08-26 13:53 [PATCH 0/2] ARM: dts: dra7-evm: add support for sd, eMMC Balaji T K
2013-08-26 13:53 ` Balaji T K
2013-08-26 13:53 ` [PATCH 1/2] ARM: dts: dra7-evm: Add mmc1 node for micro-sd support Balaji T K
2013-08-26 13:53 ` Balaji T K
2013-08-26 13:53 ` [PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support Balaji T K
2013-08-26 13:53 ` Balaji T K
2013-09-24 9:41 ` Benoit Cousson
2013-09-24 9:41 ` Benoit Cousson
[not found] ` <52415E41.7050301-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
2013-09-25 16:17 ` Balaji T K
2013-09-25 16:17 ` Balaji T K
[not found] ` <52430C8A.6040404-l0cyMroinI0@public.gmane.org>
2013-09-27 7:58 ` Sekhar Nori
2013-09-27 7:58 ` Sekhar Nori
[not found] ` <1377525218-7655-1-git-send-email-balajitk-l0cyMroinI0@public.gmane.org>
2013-09-19 15:20 ` [PATCH 0/2] ARM: dts: dra7-evm: add support for sd, eMMC Nishanth Menon
2013-09-19 15:20 ` Nishanth Menon
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.