From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: Peter Senna Tschudin <peter.senna@gmail.com>
Cc: Larry.Finger@lwfinger.net, chaoming_li@realsil.com.cn,
joe@perches.com, linville@tuxdriver.com,
linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, kernel-janitors@vger.kernel.org
Subject: Re: [PATCH V2] wireless: rtlwifi: Replace variable with a brake
Date: Sun, 22 Sep 2013 19:56:38 +0000 [thread overview]
Message-ID: <523F4B76.80507@cogentembedded.com> (raw)
In-Reply-To: <1379879410-22787-1-git-send-email-peter.senna@gmail.com>
Hello.
On 09/22/2013 11:50 PM, Peter Senna Tschudin wrote:
You have a typo in the subject -- "brake" is a device to stop a vehicle. :-)
> This patch removes the variable continual, and change the while loop
> to break when efuse_data = 0xFF.
> Tested by compilation only.
> CC: Joe Perches <joe@perches.com>
> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
> ---
> Changes from V1:
> - Fix the indetation
> - Remove remaining } from removed else
> Please ignore the patch:
> [PATCH 12/19] wireless: Change variable type to bool
> And apply this one instead.
> The variable continual was declared as int, but was used as bool. I
> sent previous patch changing the variable type to bool, but Joe Perches
> proposed that removing the variable and adding a brake would be better.
> drivers/net/wireless/rtlwifi/efuse.c | 18 ++++++++----------
> 1 file changed, 8 insertions(+), 10 deletions(-)
> diff --git a/drivers/net/wireless/rtlwifi/efuse.c b/drivers/net/wireless/rtlwifi/efuse.c
> index 838a1ed..2aedd9f 100644
> --- a/drivers/net/wireless/rtlwifi/efuse.c
> +++ b/drivers/net/wireless/rtlwifi/efuse.c
> @@ -1203,20 +1203,18 @@ static void efuse_power_switch(struct ieee80211_hw *hw, u8 write, u8 pwrstate)
>
> static u16 efuse_get_current_size(struct ieee80211_hw *hw)
> {
> - int continual = true;
> u16 efuse_addr = 0;
> u8 hworden;
> u8 efuse_data, word_cnts;
>
> - while (continual && efuse_one_byte_read(hw, efuse_addr, &efuse_data)
> - && (efuse_addr < EFUSE_MAX_SIZE)) {
> - if (efuse_data != 0xFF) {
> - hworden = efuse_data & 0x0F;
> - word_cnts = efuse_calculate_word_cnts(hworden);
> - efuse_addr = efuse_addr + (word_cnts * 2) + 1;
> - } else {
> - continual = false;
> - }
> + while (efuse_one_byte_read(hw, efuse_addr, &efuse_data) &&
> + (efuse_addr < EFUSE_MAX_SIZE)) {
Start this line under efuse_one_byte_read, please. Also, parens are not
needed.
WBR, Sergei
WARNING: multiple messages have this Message-ID (diff)
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: Peter Senna Tschudin <peter.senna@gmail.com>
Cc: Larry.Finger@lwfinger.net, chaoming_li@realsil.com.cn,
joe@perches.com, linville@tuxdriver.com,
linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, kernel-janitors@vger.kernel.org
Subject: Re: [PATCH V2] wireless: rtlwifi: Replace variable with a brake
Date: Sun, 22 Sep 2013 23:56:38 +0400 [thread overview]
Message-ID: <523F4B76.80507@cogentembedded.com> (raw)
In-Reply-To: <1379879410-22787-1-git-send-email-peter.senna@gmail.com>
Hello.
On 09/22/2013 11:50 PM, Peter Senna Tschudin wrote:
You have a typo in the subject -- "brake" is a device to stop a vehicle. :-)
> This patch removes the variable continual, and change the while loop
> to break when efuse_data == 0xFF.
> Tested by compilation only.
> CC: Joe Perches <joe@perches.com>
> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
> ---
> Changes from V1:
> - Fix the indetation
> - Remove remaining } from removed else
> Please ignore the patch:
> [PATCH 12/19] wireless: Change variable type to bool
> And apply this one instead.
> The variable continual was declared as int, but was used as bool. I
> sent previous patch changing the variable type to bool, but Joe Perches
> proposed that removing the variable and adding a brake would be better.
> drivers/net/wireless/rtlwifi/efuse.c | 18 ++++++++----------
> 1 file changed, 8 insertions(+), 10 deletions(-)
> diff --git a/drivers/net/wireless/rtlwifi/efuse.c b/drivers/net/wireless/rtlwifi/efuse.c
> index 838a1ed..2aedd9f 100644
> --- a/drivers/net/wireless/rtlwifi/efuse.c
> +++ b/drivers/net/wireless/rtlwifi/efuse.c
> @@ -1203,20 +1203,18 @@ static void efuse_power_switch(struct ieee80211_hw *hw, u8 write, u8 pwrstate)
>
> static u16 efuse_get_current_size(struct ieee80211_hw *hw)
> {
> - int continual = true;
> u16 efuse_addr = 0;
> u8 hworden;
> u8 efuse_data, word_cnts;
>
> - while (continual && efuse_one_byte_read(hw, efuse_addr, &efuse_data)
> - && (efuse_addr < EFUSE_MAX_SIZE)) {
> - if (efuse_data != 0xFF) {
> - hworden = efuse_data & 0x0F;
> - word_cnts = efuse_calculate_word_cnts(hworden);
> - efuse_addr = efuse_addr + (word_cnts * 2) + 1;
> - } else {
> - continual = false;
> - }
> + while (efuse_one_byte_read(hw, efuse_addr, &efuse_data) &&
> + (efuse_addr < EFUSE_MAX_SIZE)) {
Start this line under efuse_one_byte_read, please. Also, parens are not
needed.
WBR, Sergei
WARNING: multiple messages have this Message-ID (diff)
From: Sergei Shtylyov <sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
To: Peter Senna Tschudin
<peter.senna-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org,
chaoming_li-kXabqFNEczNtrwSWzY7KCg@public.gmane.org,
joe-6d6DIl74uiNBDgjK7y7TUQ@public.gmane.org,
linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org,
linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
kernel-janitors-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH V2] wireless: rtlwifi: Replace variable with a brake
Date: Sun, 22 Sep 2013 23:56:38 +0400 [thread overview]
Message-ID: <523F4B76.80507@cogentembedded.com> (raw)
In-Reply-To: <1379879410-22787-1-git-send-email-peter.senna-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Hello.
On 09/22/2013 11:50 PM, Peter Senna Tschudin wrote:
You have a typo in the subject -- "brake" is a device to stop a vehicle. :-)
> This patch removes the variable continual, and change the while loop
> to break when efuse_data == 0xFF.
> Tested by compilation only.
> CC: Joe Perches <joe-6d6DIl74uiNBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Peter Senna Tschudin <peter.senna-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
> Changes from V1:
> - Fix the indetation
> - Remove remaining } from removed else
> Please ignore the patch:
> [PATCH 12/19] wireless: Change variable type to bool
> And apply this one instead.
> The variable continual was declared as int, but was used as bool. I
> sent previous patch changing the variable type to bool, but Joe Perches
> proposed that removing the variable and adding a brake would be better.
> drivers/net/wireless/rtlwifi/efuse.c | 18 ++++++++----------
> 1 file changed, 8 insertions(+), 10 deletions(-)
> diff --git a/drivers/net/wireless/rtlwifi/efuse.c b/drivers/net/wireless/rtlwifi/efuse.c
> index 838a1ed..2aedd9f 100644
> --- a/drivers/net/wireless/rtlwifi/efuse.c
> +++ b/drivers/net/wireless/rtlwifi/efuse.c
> @@ -1203,20 +1203,18 @@ static void efuse_power_switch(struct ieee80211_hw *hw, u8 write, u8 pwrstate)
>
> static u16 efuse_get_current_size(struct ieee80211_hw *hw)
> {
> - int continual = true;
> u16 efuse_addr = 0;
> u8 hworden;
> u8 efuse_data, word_cnts;
>
> - while (continual && efuse_one_byte_read(hw, efuse_addr, &efuse_data)
> - && (efuse_addr < EFUSE_MAX_SIZE)) {
> - if (efuse_data != 0xFF) {
> - hworden = efuse_data & 0x0F;
> - word_cnts = efuse_calculate_word_cnts(hworden);
> - efuse_addr = efuse_addr + (word_cnts * 2) + 1;
> - } else {
> - continual = false;
> - }
> + while (efuse_one_byte_read(hw, efuse_addr, &efuse_data) &&
> + (efuse_addr < EFUSE_MAX_SIZE)) {
Start this line under efuse_one_byte_read, please. Also, parens are not
needed.
WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-09-22 19:56 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-22 19:50 [PATCH V2] wireless: rtlwifi: Replace variable with a brake Peter Senna Tschudin
2013-09-22 19:50 ` Peter Senna Tschudin
2013-09-22 19:56 ` Sergei Shtylyov [this message]
2013-09-22 19:56 ` Sergei Shtylyov
2013-09-22 19:56 ` Sergei Shtylyov
2013-09-22 20:24 ` Peter Senna Tschudin
2013-09-22 20:24 ` Peter Senna Tschudin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=523F4B76.80507@cogentembedded.com \
--to=sergei.shtylyov@cogentembedded.com \
--cc=Larry.Finger@lwfinger.net \
--cc=chaoming_li@realsil.com.cn \
--cc=joe@perches.com \
--cc=kernel-janitors@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=netdev@vger.kernel.org \
--cc=peter.senna@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.