* [PATCHv2 4/4] ti43x, omap-a15: switch KERNEL_IMAGETYPE to zImage by default @ 2013-09-25 19:49 Denys Dmytriyenko 2013-09-26 11:59 ` Maupin, Chase 0 siblings, 1 reply; 5+ messages in thread From: Denys Dmytriyenko @ 2013-09-25 19:49 UTC (permalink / raw) To: meta-ti; +Cc: Tom Rini From: Denys Dmytriyenko <denys@ti.com> * To be used with latest u-boot, that prefers zImage over uImage * ti33x will follow as soon as u-boot changes its default for that platform Signed-off-by: Denys Dmytriyenko <denys@ti.com> Cc: Tom Rini <trini@ti.com> --- v2 - don't change the default for ti33x yet, wait for u-boot conf/machine/include/omap-a15.inc | 2 +- conf/machine/include/ti43x.inc | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/conf/machine/include/omap-a15.inc b/conf/machine/include/omap-a15.inc index 623f2df..aba122a 100644 --- a/conf/machine/include/omap-a15.inc +++ b/conf/machine/include/omap-a15.inc @@ -10,7 +10,7 @@ PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging" PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging" PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging" -KERNEL_IMAGETYPE = "uImage" +KERNEL_IMAGETYPE = "zImage" UBOOT_ARCH = "arm" UBOOT_ENTRYPOINT = "0x80008000" diff --git a/conf/machine/include/ti43x.inc b/conf/machine/include/ti43x.inc index 62da105..adb66e3 100644 --- a/conf/machine/include/ti43x.inc +++ b/conf/machine/include/ti43x.inc @@ -23,7 +23,7 @@ PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging" PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging" PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging" -KERNEL_IMAGETYPE = "uImage" +KERNEL_IMAGETYPE = "zImage" UBOOT_ARCH = "arm" UBOOT_MACHINE = "am43xx_evm_config" -- 1.8.3.2 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCHv2 4/4] ti43x, omap-a15: switch KERNEL_IMAGETYPE to zImage by default 2013-09-25 19:49 [PATCHv2 4/4] ti43x, omap-a15: switch KERNEL_IMAGETYPE to zImage by default Denys Dmytriyenko @ 2013-09-26 11:59 ` Maupin, Chase 2013-09-26 15:04 ` Siddharth Heroor 0 siblings, 1 reply; 5+ messages in thread From: Maupin, Chase @ 2013-09-26 11:59 UTC (permalink / raw) To: Denys Dmytriyenko, meta-ti@yoctoproject.org; +Cc: Rini, Tom Acked-by: Chase Maupin <chase.maupin@ti.com> >-----Original Message----- >From: meta-ti-bounces@yoctoproject.org [mailto:meta-ti- >bounces@yoctoproject.org] On Behalf Of Denys Dmytriyenko >Sent: Wednesday, September 25, 2013 2:50 PM >To: meta-ti@yoctoproject.org >Cc: Rini, Tom >Subject: [meta-ti] [PATCHv2 4/4] ti43x, omap-a15: switch >KERNEL_IMAGETYPE to zImage by default > >From: Denys Dmytriyenko <denys@ti.com> > >* To be used with latest u-boot, that prefers zImage over uImage >* ti33x will follow as soon as u-boot changes its default for that >platform > >Signed-off-by: Denys Dmytriyenko <denys@ti.com> >Cc: Tom Rini <trini@ti.com> >--- >v2 - don't change the default for ti33x yet, wait for u-boot > > conf/machine/include/omap-a15.inc | 2 +- > conf/machine/include/ti43x.inc | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > >diff --git a/conf/machine/include/omap-a15.inc >b/conf/machine/include/omap-a15.inc >index 623f2df..aba122a 100644 >--- a/conf/machine/include/omap-a15.inc >+++ b/conf/machine/include/omap-a15.inc >@@ -10,7 +10,7 @@ PREFERRED_PROVIDER_virtual/kernel = "linux-ti- >staging" > PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging" > PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging" > >-KERNEL_IMAGETYPE = "uImage" >+KERNEL_IMAGETYPE = "zImage" > > UBOOT_ARCH = "arm" > UBOOT_ENTRYPOINT = "0x80008000" >diff --git a/conf/machine/include/ti43x.inc >b/conf/machine/include/ti43x.inc >index 62da105..adb66e3 100644 >--- a/conf/machine/include/ti43x.inc >+++ b/conf/machine/include/ti43x.inc >@@ -23,7 +23,7 @@ PREFERRED_PROVIDER_virtual/kernel = "linux-ti- >staging" > PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging" > PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging" > >-KERNEL_IMAGETYPE = "uImage" >+KERNEL_IMAGETYPE = "zImage" > > UBOOT_ARCH = "arm" > UBOOT_MACHINE = "am43xx_evm_config" >-- >1.8.3.2 > >_______________________________________________ >meta-ti mailing list >meta-ti@yoctoproject.org >https://lists.yoctoproject.org/listinfo/meta-ti ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCHv2 4/4] ti43x, omap-a15: switch KERNEL_IMAGETYPE to zImage by default 2013-09-26 11:59 ` Maupin, Chase @ 2013-09-26 15:04 ` Siddharth Heroor 2013-09-26 15:35 ` Denys Dmytriyenko 0 siblings, 1 reply; 5+ messages in thread From: Siddharth Heroor @ 2013-09-26 15:04 UTC (permalink / raw) To: Maupin, Chase; +Cc: meta-ti@yoctoproject.org, Rini, Tom On 9/26/2013 5:29 PM, Maupin, Chase wrote: > Acked-by: Chase Maupin <chase.maupin@ti.com> Just a question - is it possible to override the KERNEL_IMAGETYPE in a branding.inc file? In general, we want to move to zImage for GLSDK but some customers who might want to stay on uImage as they ramp. Otherwise, no comments. Acked-by: Siddharth Heroor <heroor@ti.com> > > >> -----Original Message----- >> From: meta-ti-bounces@yoctoproject.org [mailto:meta-ti- >> bounces@yoctoproject.org] On Behalf Of Denys Dmytriyenko >> Sent: Wednesday, September 25, 2013 2:50 PM >> To: meta-ti@yoctoproject.org >> Cc: Rini, Tom >> Subject: [meta-ti] [PATCHv2 4/4] ti43x, omap-a15: switch >> KERNEL_IMAGETYPE to zImage by default >> >> From: Denys Dmytriyenko <denys@ti.com> >> >> * To be used with latest u-boot, that prefers zImage over uImage >> * ti33x will follow as soon as u-boot changes its default for that >> platform >> >> Signed-off-by: Denys Dmytriyenko <denys@ti.com> >> Cc: Tom Rini <trini@ti.com> >> --- >> v2 - don't change the default for ti33x yet, wait for u-boot >> >> conf/machine/include/omap-a15.inc | 2 +- >> conf/machine/include/ti43x.inc | 2 +- >> 2 files changed, 2 insertions(+), 2 deletions(-) >> >> diff --git a/conf/machine/include/omap-a15.inc >> b/conf/machine/include/omap-a15.inc >> index 623f2df..aba122a 100644 >> --- a/conf/machine/include/omap-a15.inc >> +++ b/conf/machine/include/omap-a15.inc >> @@ -10,7 +10,7 @@ PREFERRED_PROVIDER_virtual/kernel = "linux-ti- >> staging" >> PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging" >> PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging" >> >> -KERNEL_IMAGETYPE = "uImage" >> +KERNEL_IMAGETYPE = "zImage" >> >> UBOOT_ARCH = "arm" >> UBOOT_ENTRYPOINT = "0x80008000" >> diff --git a/conf/machine/include/ti43x.inc >> b/conf/machine/include/ti43x.inc >> index 62da105..adb66e3 100644 >> --- a/conf/machine/include/ti43x.inc >> +++ b/conf/machine/include/ti43x.inc >> @@ -23,7 +23,7 @@ PREFERRED_PROVIDER_virtual/kernel = "linux-ti- >> staging" >> PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging" >> PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging" >> >> -KERNEL_IMAGETYPE = "uImage" >> +KERNEL_IMAGETYPE = "zImage" >> >> UBOOT_ARCH = "arm" >> UBOOT_MACHINE = "am43xx_evm_config" >> -- >> 1.8.3.2 >> >> _______________________________________________ >> meta-ti mailing list >> meta-ti@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/meta-ti > _______________________________________________ > meta-ti mailing list > meta-ti@yoctoproject.org > https://lists.yoctoproject.org/listinfo/meta-ti > ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCHv2 4/4] ti43x, omap-a15: switch KERNEL_IMAGETYPE to zImage by default 2013-09-26 15:04 ` Siddharth Heroor @ 2013-09-26 15:35 ` Denys Dmytriyenko 2013-09-26 15:50 ` Siddharth Heroor 0 siblings, 1 reply; 5+ messages in thread From: Denys Dmytriyenko @ 2013-09-26 15:35 UTC (permalink / raw) To: Siddharth Heroor; +Cc: meta-ti@yoctoproject.org, Rini, Tom On Thu, Sep 26, 2013 at 08:34:27PM +0530, Siddharth Heroor wrote: > On 9/26/2013 5:29 PM, Maupin, Chase wrote: > > Acked-by: Chase Maupin <chase.maupin@ti.com> > > Just a question - is it possible to override the KERNEL_IMAGETYPE in a > branding.inc file? In general, we want to move to zImage for GLSDK but > some customers who might want to stay on uImage as they ramp. It won't be very easy to do from a branding file. That's why I had to rev the other patch to keep GLSDK 3.8 and AMSDK 3.2 kernel recipes on uImage, but switch other platforms to zImage which already have recent enough u-boot... When you have a new kernel/u-boot that prefers zImage (like the new linux-ti-staging_git.bb we have for 3.12 integration), you can set the image type to zImage in the kernel recipe, or rather not specify it at all, since it will be picked up from machine config. In other words, after the setting in the machine config, you have one more option to override it in a specific kernel recipe. That way if your branding selects latest kernel/u-boot combo, you get zImage by default from the machine config. But if branding selects 3.2 kernel with early u-boot, it gets overwritten back to uImage... -- Denys > Otherwise, no comments. > > Acked-by: Siddharth Heroor <heroor@ti.com> > > > > > > >> -----Original Message----- > >> From: meta-ti-bounces@yoctoproject.org [mailto:meta-ti- > >> bounces@yoctoproject.org] On Behalf Of Denys Dmytriyenko > >> Sent: Wednesday, September 25, 2013 2:50 PM > >> To: meta-ti@yoctoproject.org > >> Cc: Rini, Tom > >> Subject: [meta-ti] [PATCHv2 4/4] ti43x, omap-a15: switch > >> KERNEL_IMAGETYPE to zImage by default > >> > >> From: Denys Dmytriyenko <denys@ti.com> > >> > >> * To be used with latest u-boot, that prefers zImage over uImage > >> * ti33x will follow as soon as u-boot changes its default for that > >> platform > >> > >> Signed-off-by: Denys Dmytriyenko <denys@ti.com> > >> Cc: Tom Rini <trini@ti.com> > >> --- > >> v2 - don't change the default for ti33x yet, wait for u-boot > >> > >> conf/machine/include/omap-a15.inc | 2 +- > >> conf/machine/include/ti43x.inc | 2 +- > >> 2 files changed, 2 insertions(+), 2 deletions(-) > >> > >> diff --git a/conf/machine/include/omap-a15.inc > >> b/conf/machine/include/omap-a15.inc > >> index 623f2df..aba122a 100644 > >> --- a/conf/machine/include/omap-a15.inc > >> +++ b/conf/machine/include/omap-a15.inc > >> @@ -10,7 +10,7 @@ PREFERRED_PROVIDER_virtual/kernel = "linux-ti- > >> staging" > >> PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging" > >> PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging" > >> > >> -KERNEL_IMAGETYPE = "uImage" > >> +KERNEL_IMAGETYPE = "zImage" > >> > >> UBOOT_ARCH = "arm" > >> UBOOT_ENTRYPOINT = "0x80008000" > >> diff --git a/conf/machine/include/ti43x.inc > >> b/conf/machine/include/ti43x.inc > >> index 62da105..adb66e3 100644 > >> --- a/conf/machine/include/ti43x.inc > >> +++ b/conf/machine/include/ti43x.inc > >> @@ -23,7 +23,7 @@ PREFERRED_PROVIDER_virtual/kernel = "linux-ti- > >> staging" > >> PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging" > >> PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging" > >> > >> -KERNEL_IMAGETYPE = "uImage" > >> +KERNEL_IMAGETYPE = "zImage" > >> > >> UBOOT_ARCH = "arm" > >> UBOOT_MACHINE = "am43xx_evm_config" > >> -- > >> 1.8.3.2 > >> > >> _______________________________________________ > >> meta-ti mailing list > >> meta-ti@yoctoproject.org > >> https://lists.yoctoproject.org/listinfo/meta-ti > > _______________________________________________ > > meta-ti mailing list > > meta-ti@yoctoproject.org > > https://lists.yoctoproject.org/listinfo/meta-ti > > > > _______________________________________________ > meta-ti mailing list > meta-ti@yoctoproject.org > https://lists.yoctoproject.org/listinfo/meta-ti ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCHv2 4/4] ti43x, omap-a15: switch KERNEL_IMAGETYPE to zImage by default 2013-09-26 15:35 ` Denys Dmytriyenko @ 2013-09-26 15:50 ` Siddharth Heroor 0 siblings, 0 replies; 5+ messages in thread From: Siddharth Heroor @ 2013-09-26 15:50 UTC (permalink / raw) To: Denys Dmytriyenko; +Cc: meta-ti@yoctoproject.org, Rini, Tom On 9/26/2013 9:05 PM, Denys Dmytriyenko wrote: > On Thu, Sep 26, 2013 at 08:34:27PM +0530, Siddharth Heroor wrote: >> On 9/26/2013 5:29 PM, Maupin, Chase wrote: >>> Acked-by: Chase Maupin <chase.maupin@ti.com> >> >> Just a question - is it possible to override the KERNEL_IMAGETYPE in a >> branding.inc file? In general, we want to move to zImage for GLSDK but >> some customers who might want to stay on uImage as they ramp. > > It won't be very easy to do from a branding file. That's why I had to rev > the other patch to keep GLSDK 3.8 and AMSDK 3.2 kernel recipes on uImage, but > switch other platforms to zImage which already have recent enough u-boot... > > When you have a new kernel/u-boot that prefers zImage (like the new > linux-ti-staging_git.bb we have for 3.12 integration), you can set the image > type to zImage in the kernel recipe, or rather not specify it at all, since > it will be picked up from machine config. > > In other words, after the setting in the machine config, you have one more > option to override it in a specific kernel recipe. That way if your branding > selects latest kernel/u-boot combo, you get zImage by default from the machine > config. But if branding selects 3.2 kernel with early u-boot, it gets > overwritten back to uImage... > Got it. Thanks, Sid ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2013-09-26 15:50 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-09-25 19:49 [PATCHv2 4/4] ti43x, omap-a15: switch KERNEL_IMAGETYPE to zImage by default Denys Dmytriyenko 2013-09-26 11:59 ` Maupin, Chase 2013-09-26 15:04 ` Siddharth Heroor 2013-09-26 15:35 ` Denys Dmytriyenko 2013-09-26 15:50 ` Siddharth Heroor
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.