From: Eduardo Valentin <eduardo.valentin@ti.com>
To: Nishanth Menon <nm@ti.com>
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org, wni@nvidia.com,
durgadoss.r@intel.com, ian.campbell@citrix.com,
pawel.moll@arm.com, swarren@wwwdotorg.org,
"Tony Lindgren" <tony@atomide.com>,
devicetree-discuss@lists.ozlabs.org, linux-pm@vger.kernel.org,
linux-kernel@vger.kernel.org, rob.herring@calxeda.com,
lm-sensors@lm-sensors.org,
"Eduardo Valentin" <eduardo.valentin@ti.com>,
linux-arm-kernel@lists.infradead.org,
"Benoît Cousson" <bcousson@baylibre.com>,
grant.likely@linaro.org, "Russell King" <linux@arm.linux.org.uk>,
rui.zhang@intel.com, linux-omap@vger.kernel.org,
linux@roeck-us.net
Subject: Re: [PATCHv4 11/18] arm: dts: add omap4430 thermal data
Date: Fri, 27 Sep 2013 09:20:31 -0400 [thread overview]
Message-ID: <5245861F.7000109@ti.com> (raw)
In-Reply-To: <20130927122439.GA8360@kahuna>
[-- Attachment #1.1: Type: text/plain, Size: 2008 bytes --]
On 27-09-2013 08:24, Nishanth Menon wrote:
> On 23:13-20130926, Eduardo Valentin wrote:
>> This patch changes the dtsi entry on omap4430 to contain
>> the thermal data. This data will enable the passive
>> cooling with CPUfreq cooling device at 100C and the
>> system will do a thermal shutdown at 125C.
>>
>> Cc: "Benoît Cousson" <bcousson@baylibre.com>
>> Cc: Tony Lindgren <tony@atomide.com>
>> Cc: Russell King <linux@arm.linux.org.uk>
>> Cc: linux-omap@vger.kernel.org
>> Cc: devicetree-discuss@lists.ozlabs.org
>> Cc: linux-arm-kernel@lists.infradead.org
>> Cc: linux-kernel@vger.kernel.org
>> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
>> ---
>> arch/arm/boot/dts/omap443x.dtsi | 10 ++++++++--
>> 1 file changed, 8 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
>> index bcf455e..e9c97d6 100644
>> --- a/arch/arm/boot/dts/omap443x.dtsi
>> +++ b/arch/arm/boot/dts/omap443x.dtsi
>> @@ -12,7 +12,7 @@
>>
>> / {
>> cpus {
>> - cpu@0 {
>> + cpu0: cpu@0 {
>> /* OMAP443x variants OPP50-OPPNT */
>> operating-points = <
>> /* kHz uV */
>> @@ -25,9 +25,15 @@
>> };
>> };
>>
>> - bandgap {
>> + thermal-zones{
>> + #include "omap4-cpu-thermal.dtsi"
>> + };
>> +
>> + bandgap: bandgap {
>> reg = <0x4a002260 0x4
>> 0x4a00232C 0x4>;
>> compatible = "ti,omap4430-bandgap";
>> +
>> + #thermal-sensor-cells = <0>;
> 2 cents:
> we might want to move bandgap under ocp?
>
Yes, agreed. But I don't think this change is related to this patch or
to this series.
Tks Nishanth
>> };
>> };
>> --
>> 1.8.2.1.342.gfa7285d
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
--
You have got to be excited about what you are doing. (L. Lamport)
Eduardo Valentin
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 295 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Eduardo Valentin <eduardo.valentin@ti.com>
To: Nishanth Menon <nm@ti.com>
Cc: "Eduardo Valentin" <eduardo.valentin@ti.com>,
swarren@wwwdotorg.org, pawel.moll@arm.com, mark.rutland@arm.com,
ian.campbell@citrix.com, rob.herring@calxeda.com,
linux@roeck-us.net, rui.zhang@intel.com, wni@nvidia.com,
devicetree@vger.kernel.org, durgadoss.r@intel.com,
linux-pm@vger.kernel.org, "Tony Lindgren" <tony@atomide.com>,
devicetree-discuss@lists.ozlabs.org,
linux-kernel@vger.kernel.org, lm-sensors@lm-sensors.org,
"Benoît Cousson" <bcousson@baylibre.com>,
grant.likely@linaro.org, "Russell King" <linux@arm.linux.org.uk>,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [lm-sensors] [PATCHv4 11/18] arm: dts: add omap4430 thermal data
Date: Fri, 27 Sep 2013 13:20:31 +0000 [thread overview]
Message-ID: <5245861F.7000109@ti.com> (raw)
In-Reply-To: <20130927122439.GA8360@kahuna>
[-- Attachment #1.1: Type: text/plain, Size: 2008 bytes --]
On 27-09-2013 08:24, Nishanth Menon wrote:
> On 23:13-20130926, Eduardo Valentin wrote:
>> This patch changes the dtsi entry on omap4430 to contain
>> the thermal data. This data will enable the passive
>> cooling with CPUfreq cooling device at 100C and the
>> system will do a thermal shutdown at 125C.
>>
>> Cc: "Benoît Cousson" <bcousson@baylibre.com>
>> Cc: Tony Lindgren <tony@atomide.com>
>> Cc: Russell King <linux@arm.linux.org.uk>
>> Cc: linux-omap@vger.kernel.org
>> Cc: devicetree-discuss@lists.ozlabs.org
>> Cc: linux-arm-kernel@lists.infradead.org
>> Cc: linux-kernel@vger.kernel.org
>> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
>> ---
>> arch/arm/boot/dts/omap443x.dtsi | 10 ++++++++--
>> 1 file changed, 8 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
>> index bcf455e..e9c97d6 100644
>> --- a/arch/arm/boot/dts/omap443x.dtsi
>> +++ b/arch/arm/boot/dts/omap443x.dtsi
>> @@ -12,7 +12,7 @@
>>
>> / {
>> cpus {
>> - cpu@0 {
>> + cpu0: cpu@0 {
>> /* OMAP443x variants OPP50-OPPNT */
>> operating-points = <
>> /* kHz uV */
>> @@ -25,9 +25,15 @@
>> };
>> };
>>
>> - bandgap {
>> + thermal-zones{
>> + #include "omap4-cpu-thermal.dtsi"
>> + };
>> +
>> + bandgap: bandgap {
>> reg = <0x4a002260 0x4
>> 0x4a00232C 0x4>;
>> compatible = "ti,omap4430-bandgap";
>> +
>> + #thermal-sensor-cells = <0>;
> 2 cents:
> we might want to move bandgap under ocp?
>
Yes, agreed. But I don't think this change is related to this patch or
to this series.
Tks Nishanth
>> };
>> };
>> --
>> 1.8.2.1.342.gfa7285d
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
--
You have got to be excited about what you are doing. (L. Lamport)
Eduardo Valentin
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 295 bytes --]
[-- Attachment #2: Type: text/plain, Size: 153 bytes --]
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
WARNING: multiple messages have this Message-ID (diff)
From: eduardo.valentin@ti.com (Eduardo Valentin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv4 11/18] arm: dts: add omap4430 thermal data
Date: Fri, 27 Sep 2013 09:20:31 -0400 [thread overview]
Message-ID: <5245861F.7000109@ti.com> (raw)
In-Reply-To: <20130927122439.GA8360@kahuna>
On 27-09-2013 08:24, Nishanth Menon wrote:
> On 23:13-20130926, Eduardo Valentin wrote:
>> This patch changes the dtsi entry on omap4430 to contain
>> the thermal data. This data will enable the passive
>> cooling with CPUfreq cooling device at 100C and the
>> system will do a thermal shutdown at 125C.
>>
>> Cc: "Beno?t Cousson" <bcousson@baylibre.com>
>> Cc: Tony Lindgren <tony@atomide.com>
>> Cc: Russell King <linux@arm.linux.org.uk>
>> Cc: linux-omap at vger.kernel.org
>> Cc: devicetree-discuss at lists.ozlabs.org
>> Cc: linux-arm-kernel at lists.infradead.org
>> Cc: linux-kernel at vger.kernel.org
>> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
>> ---
>> arch/arm/boot/dts/omap443x.dtsi | 10 ++++++++--
>> 1 file changed, 8 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
>> index bcf455e..e9c97d6 100644
>> --- a/arch/arm/boot/dts/omap443x.dtsi
>> +++ b/arch/arm/boot/dts/omap443x.dtsi
>> @@ -12,7 +12,7 @@
>>
>> / {
>> cpus {
>> - cpu at 0 {
>> + cpu0: cpu at 0 {
>> /* OMAP443x variants OPP50-OPPNT */
>> operating-points = <
>> /* kHz uV */
>> @@ -25,9 +25,15 @@
>> };
>> };
>>
>> - bandgap {
>> + thermal-zones{
>> + #include "omap4-cpu-thermal.dtsi"
>> + };
>> +
>> + bandgap: bandgap {
>> reg = <0x4a002260 0x4
>> 0x4a00232C 0x4>;
>> compatible = "ti,omap4430-bandgap";
>> +
>> + #thermal-sensor-cells = <0>;
> 2 cents:
> we might want to move bandgap under ocp?
>
Yes, agreed. But I don't think this change is related to this patch or
to this series.
Tks Nishanth
>> };
>> };
>> --
>> 1.8.2.1.342.gfa7285d
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
--
You have got to be excited about what you are doing. (L. Lamport)
Eduardo Valentin
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 295 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130927/def0a093/attachment-0001.sig>
WARNING: multiple messages have this Message-ID (diff)
From: Eduardo Valentin <eduardo.valentin@ti.com>
To: Nishanth Menon <nm@ti.com>
Cc: "Eduardo Valentin" <eduardo.valentin@ti.com>,
swarren@wwwdotorg.org, pawel.moll@arm.com, mark.rutland@arm.com,
ian.campbell@citrix.com, rob.herring@calxeda.com,
linux@roeck-us.net, rui.zhang@intel.com, wni@nvidia.com,
devicetree@vger.kernel.org, durgadoss.r@intel.com,
linux-pm@vger.kernel.org, "Tony Lindgren" <tony@atomide.com>,
devicetree-discuss@lists.ozlabs.org,
linux-kernel@vger.kernel.org, lm-sensors@lm-sensors.org,
"Benoît Cousson" <bcousson@baylibre.com>,
grant.likely@linaro.org, "Russell King" <linux@arm.linux.org.uk>,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCHv4 11/18] arm: dts: add omap4430 thermal data
Date: Fri, 27 Sep 2013 09:20:31 -0400 [thread overview]
Message-ID: <5245861F.7000109@ti.com> (raw)
In-Reply-To: <20130927122439.GA8360@kahuna>
[-- Attachment #1: Type: text/plain, Size: 2008 bytes --]
On 27-09-2013 08:24, Nishanth Menon wrote:
> On 23:13-20130926, Eduardo Valentin wrote:
>> This patch changes the dtsi entry on omap4430 to contain
>> the thermal data. This data will enable the passive
>> cooling with CPUfreq cooling device at 100C and the
>> system will do a thermal shutdown at 125C.
>>
>> Cc: "Benoît Cousson" <bcousson@baylibre.com>
>> Cc: Tony Lindgren <tony@atomide.com>
>> Cc: Russell King <linux@arm.linux.org.uk>
>> Cc: linux-omap@vger.kernel.org
>> Cc: devicetree-discuss@lists.ozlabs.org
>> Cc: linux-arm-kernel@lists.infradead.org
>> Cc: linux-kernel@vger.kernel.org
>> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
>> ---
>> arch/arm/boot/dts/omap443x.dtsi | 10 ++++++++--
>> 1 file changed, 8 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
>> index bcf455e..e9c97d6 100644
>> --- a/arch/arm/boot/dts/omap443x.dtsi
>> +++ b/arch/arm/boot/dts/omap443x.dtsi
>> @@ -12,7 +12,7 @@
>>
>> / {
>> cpus {
>> - cpu@0 {
>> + cpu0: cpu@0 {
>> /* OMAP443x variants OPP50-OPPNT */
>> operating-points = <
>> /* kHz uV */
>> @@ -25,9 +25,15 @@
>> };
>> };
>>
>> - bandgap {
>> + thermal-zones{
>> + #include "omap4-cpu-thermal.dtsi"
>> + };
>> +
>> + bandgap: bandgap {
>> reg = <0x4a002260 0x4
>> 0x4a00232C 0x4>;
>> compatible = "ti,omap4430-bandgap";
>> +
>> + #thermal-sensor-cells = <0>;
> 2 cents:
> we might want to move bandgap under ocp?
>
Yes, agreed. But I don't think this change is related to this patch or
to this series.
Tks Nishanth
>> };
>> };
>> --
>> 1.8.2.1.342.gfa7285d
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
--
You have got to be excited about what you are doing. (L. Lamport)
Eduardo Valentin
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 295 bytes --]
next prev parent reply other threads:[~2013-09-27 13:20 UTC|newest]
Thread overview: 101+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-27 3:13 [PATCHv4 00/18] device thermal limits represented in device tree nodes (v4) Eduardo Valentin
2013-09-27 3:13 ` Eduardo Valentin
2013-09-27 3:13 ` [lm-sensors] " Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 01/18] thermal: allow registering without .get_temp Eduardo Valentin
2013-09-27 3:13 ` Eduardo Valentin
2013-09-27 3:13 ` [lm-sensors] " Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 02/18] thermal: core: allow binding via .bind when tzp is present Eduardo Valentin
2013-09-27 3:13 ` Eduardo Valentin
2013-09-27 3:13 ` [lm-sensors] " Eduardo Valentin
2013-11-06 2:56 ` Wei Ni
2013-11-06 2:56 ` [lm-sensors] " Wei Ni
2013-09-27 3:13 ` [PATCHv7 03/18] thermal: introduce device tree parser Eduardo Valentin
2013-09-27 3:13 ` Eduardo Valentin
2013-09-27 3:13 ` [lm-sensors] " Eduardo Valentin
2013-09-30 15:36 ` Mark Rutland
2013-09-30 15:36 ` [lm-sensors] " Mark Rutland
[not found] ` <20130930153614.GA22259-NuALmloUBlrZROr8t4l/smS4ubULX0JqMm0uRHvK7Nw@public.gmane.org>
2013-09-30 20:47 ` Eduardo Valentin
2013-09-30 20:47 ` Eduardo Valentin
2013-09-30 20:47 ` [lm-sensors] " Eduardo Valentin
[not found] ` <1380251605-3804-4-git-send-email-eduardo.valentin-l0cyMroinI0@public.gmane.org>
2013-10-01 2:39 ` [PATCHv8 " Eduardo Valentin
2013-10-01 2:39 ` Eduardo Valentin
2013-10-01 2:39 ` [lm-sensors] " Eduardo Valentin
2013-10-07 20:51 ` Mark Rutland
2013-10-07 20:51 ` [lm-sensors] " Mark Rutland
2013-10-08 14:59 ` Eduardo Valentin
2013-10-08 14:59 ` Eduardo Valentin
2013-10-08 14:59 ` [lm-sensors] " Eduardo Valentin
2013-11-05 18:08 ` Eduardo Valentin
2013-11-05 18:08 ` [lm-sensors] " Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 05/18] thermal: cpu_cooling: introduce of_cpufreq_cooling_register Eduardo Valentin
2013-09-27 3:13 ` Eduardo Valentin
2013-09-27 3:13 ` [lm-sensors] " Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 06/18] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device properties Eduardo Valentin
2013-09-27 3:13 ` Eduardo Valentin
2013-09-27 3:13 ` [lm-sensors] [PATCHv4 06/18] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device propertie Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 07/18] hwmon: lm75: expose to thermal fw via DT nodes Eduardo Valentin
2013-09-27 3:13 ` Eduardo Valentin
2013-09-27 3:13 ` [lm-sensors] " Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 09/18] thermal: ti-soc-thermal: use thermal DT infrastructure Eduardo Valentin
2013-09-27 3:13 ` Eduardo Valentin
2013-09-27 3:13 ` [lm-sensors] " Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 10/18] arm: dts: add omap4 CPU thermal data Eduardo Valentin
2013-09-27 3:13 ` Eduardo Valentin
2013-09-27 3:13 ` Eduardo Valentin
2013-09-27 3:13 ` [lm-sensors] " Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 11/18] arm: dts: add omap4430 " Eduardo Valentin
2013-09-27 3:13 ` Eduardo Valentin
2013-09-27 3:13 ` Eduardo Valentin
2013-09-27 3:13 ` [lm-sensors] " Eduardo Valentin
2013-09-27 12:24 ` Nishanth Menon
2013-09-27 12:24 ` Nishanth Menon
2013-09-27 12:24 ` Nishanth Menon
2013-09-27 12:24 ` [lm-sensors] " Nishanth Menon
2013-09-27 13:20 ` Eduardo Valentin [this message]
2013-09-27 13:20 ` Eduardo Valentin
2013-09-27 13:20 ` Eduardo Valentin
2013-09-27 13:20 ` [lm-sensors] " Eduardo Valentin
2013-09-27 13:26 ` Nishanth Menon
2013-09-27 13:26 ` Nishanth Menon
2013-09-27 13:26 ` [lm-sensors] " Nishanth Menon
2013-09-27 13:42 ` Eduardo Valentin
2013-09-27 13:42 ` Eduardo Valentin
2013-09-27 13:42 ` Eduardo Valentin
2013-09-27 13:42 ` [lm-sensors] " Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 12/18] arm: dts: add omap4460 " Eduardo Valentin
2013-09-27 3:13 ` Eduardo Valentin
2013-09-27 3:13 ` Eduardo Valentin
2013-09-27 3:13 ` [lm-sensors] " Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 14/18] arm: dts: add cooling properties on omap4460 cpu node Eduardo Valentin
2013-09-27 3:13 ` Eduardo Valentin
2013-09-27 3:13 ` Eduardo Valentin
2013-09-27 3:13 ` [lm-sensors] " Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 15/18] arm: dts: add omap5 GPU thermal data Eduardo Valentin
2013-09-27 3:13 ` Eduardo Valentin
2013-09-27 3:13 ` Eduardo Valentin
2013-09-27 3:13 ` [lm-sensors] " Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 16/18] arm: dts: add omap5 CORE " Eduardo Valentin
2013-09-27 3:13 ` Eduardo Valentin
2013-09-27 3:13 ` Eduardo Valentin
2013-09-27 3:13 ` [lm-sensors] " Eduardo Valentin
[not found] ` <1380251605-3804-1-git-send-email-eduardo.valentin-l0cyMroinI0@public.gmane.org>
2013-09-27 3:13 ` [PATCHv4 04/18] thermal: core: introduce thermal_of_cooling_device_register Eduardo Valentin
2013-09-27 3:13 ` Eduardo Valentin
2013-09-27 3:13 ` [lm-sensors] " Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 08/18] hwmon: tmp102: expose to thermal fw via DT nodes Eduardo Valentin
2013-09-27 3:13 ` Eduardo Valentin
2013-09-27 3:13 ` [lm-sensors] " Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 13/18] arm: dts: add cooling properties on omap4430 cpu node Eduardo Valentin
2013-09-27 3:13 ` Eduardo Valentin
2013-09-27 3:13 ` Eduardo Valentin
2013-09-27 3:13 ` [lm-sensors] " Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 17/18] arm: dts: add omap5 thermal data Eduardo Valentin
2013-09-27 3:13 ` Eduardo Valentin
2013-09-27 3:13 ` Eduardo Valentin
2013-09-27 3:13 ` [lm-sensors] " Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 18/18] arm: dts: add cooling properties on omap5 cpu node Eduardo Valentin
2013-09-27 3:13 ` Eduardo Valentin
2013-09-27 3:13 ` Eduardo Valentin
2013-09-27 3:13 ` [lm-sensors] " Eduardo Valentin
2013-09-27 3:15 ` [PATCHv4 00/18] device thermal limits represented in device tree nodes (v4) Eduardo Valentin
2013-09-27 3:15 ` Eduardo Valentin
2013-09-27 3:15 ` [lm-sensors] " Eduardo Valentin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5245861F.7000109@ti.com \
--to=eduardo.valentin@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=devicetree@vger.kernel.org \
--cc=durgadoss.r@intel.com \
--cc=grant.likely@linaro.org \
--cc=ian.campbell@citrix.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=linux@roeck-us.net \
--cc=lm-sensors@lm-sensors.org \
--cc=mark.rutland@arm.com \
--cc=nm@ti.com \
--cc=pawel.moll@arm.com \
--cc=rob.herring@calxeda.com \
--cc=rui.zhang@intel.com \
--cc=swarren@wwwdotorg.org \
--cc=tony@atomide.com \
--cc=wni@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.