From: Benoit Cousson <bcousson@baylibre.com>
To: Keerthy <j-keerthy@ti.com>
Cc: Nishanth Menon <nm@ti.com>,
linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org,
pawel.moll@arm.com, devicetree@vger.kernel.org,
rob.herring@calxeda.com, linux-arm-kernel@lists.infradead.org,
balajitk@ti.com
Subject: Re: [PATCH] ARM: DTS: DRA7: Add TPS659038 PMIC nodes
Date: Thu, 03 Oct 2013 15:39:35 +0200 [thread overview]
Message-ID: <524D7397.2000200@baylibre.com> (raw)
In-Reply-To: <522FFFE2.2000705@ti.com>
Hi Keerthy,
On 11/09/2013 07:30, Keerthy wrote:
> On Tuesday 10 September 2013 12:51 AM, Nishanth Menon wrote:
>> On 08/26/2013 12:36 AM, Keerthy wrote:
>>> The Patch adds nodes for TPS659038 PMIC for DRA7 boards.
>>>
>>> It is based on top of:
>>> http://comments.gmane.org/gmane.linux.ports.arm.omap/102459.
>>>
>>> Documentation: Documentation/devicetree/bindings/mfd/palmas.txt
>>> Documentation/devicetree/bindings/regulator/palmas-pmic.txt
>>>
>>> Boot Tested on DRA7 d1 Board.
>>>
>>> Signed-off-by: Keerthy <j-keerthy@ti.com>
>>> ---
>>> arch/arm/boot/dts/dra7-evm.dts | 118
>>> ++++++++++++++++++++++++++++++++++++++++
>>> 1 file changed, 118 insertions(+)
>>>
>>> Index: linux/arch/arm/boot/dts/dra7-evm.dts
>>> ===================================================================
>>> --- linux.orig/arch/arm/boot/dts/dra7-evm.dts 2013-08-26
>>> 09:57:52.496173554 +0530
>>> +++ linux/arch/arm/boot/dts/dra7-evm.dts 2013-08-26
>>> 10:38:44.995414695 +0530
>>> @@ -93,6 +93,119 @@
>>> pinctrl-names = "default";
>>> pinctrl-0 = <&i2c1_pins>;
>>> clock-frequency = <400000>;
>>> +
>>> + tps659038: tps659038@58 {
>>> + compatible = "ti,tps659038";
>>> + reg = <0x58>;
>>> +
>>> + tps659038_pmic {
>>> + compatible = "ti,tps659038-pmic";
>>> +
>>> + regulators {
>>> + smps123_reg: smps123 {
>>> + /* VDD_MPU */
>>> + regulator-name = "smps123";
>>> + regulator-min-microvolt = < 850000>;
>>> + regulator-max-microvolt = <1250000>;
>>> + regulator-always-on;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + smps45_reg: smps45 {
>>> + /* VDD_DSPEVE */
>>> + regulator-name = "smps45";
>>> + regulator-min-microvolt = < 850000>;
>>> + regulator-max-microvolt = <1150000>;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + smps6_reg: smps6 {
>>> + /* VDD_GPU - over VDD_SMPS6 */
>>> + regulator-name = "smps6";
>>> + regulator-min-microvolt = <850000>;
>>> + regulator-max-microvolt = <12500000>;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + smps7_reg: smps7 {
>>> + /* CORE_VDD */
>>> + regulator-name = "smps7";
>>> + regulator-min-microvolt = <850000>;
>>> + regulator-max-microvolt = <1030000>;
>>> + regulator-always-on;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + smps8_reg: smps8 {
>>> + /* VDD_IVAHD */
>>> + regulator-name = "smps8";
>>> + regulator-min-microvolt = < 850000>;
>>> + regulator-max-microvolt = <1250000>;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + smps9_reg: smps9 {
>>> + /* VDDS1V8 */
>>> + regulator-name = "smps9";
>>> + regulator-min-microvolt = <1800000>;
>>> + regulator-max-microvolt = <1800000>;
>>> + regulator-always-on;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + ldo1_reg: ldo1 {
>>> + /* LDO1_OUT --> SDIO */
>>> + regulator-name = "ldo1";
>>> + regulator-min-microvolt = <1800000>;
>>> + regulator-max-microvolt = <3300000>;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + ldo2_reg: ldo2 {
>>> + /* VDD_RTCIO */
>>> + /* LDO2 -> VDDSHV5, LDO2 also goes to
>>> CAN_PHY_3V3 */
>>> + regulator-name = "ldo2";
>>> + regulator-min-microvolt = <3300000>;
>>> + regulator-max-microvolt = <3300000>;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + ldo3_reg: ldo3 {
>>> + /* VDDA_1V8_PHY */
>>> + regulator-name = "ldo3";
>>> + regulator-min-microvolt = <1800000>;
>>> + regulator-max-microvolt = <1800000>;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + ldo9_reg: ldo9 {
>>> + /* VDD_RTC */
>>> + regulator-name = "ldo9";
>>> + regulator-min-microvolt = <1050000>;
>>> + regulator-max-microvolt = <1050000>;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + ldoln_reg: ldoln {
>>> + /* VDDA_1V8_PLL */
>>> + regulator-name = "ldoln";
>>> + regulator-min-microvolt = <1800000>;
>>> + regulator-max-microvolt = <1800000>;
>>> + regulator-always-on;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + ldousb_reg: ldousb {
>>> + /* VDDA_3V_USB: VDDA_USBHS33 */
>>> + regulator-name = "ldousb";
>>> + regulator-min-microvolt = <3300000>;
>>> + regulator-max-microvolt = <3300000>;
>>> + regulator-boot-on;
>>> + };
>>> +
Nit: Extra blank line not needed.
>>> + };
>>> + };
>>> + };
>>> };
Nit: You have an extra level on indentation not needed.
>>> &i2c2 {
>>>
>> Acked-by: Nishanth Menon <nm@ti.com>
Beside the two minors nits, the patch looks good to me.
Since, you've been waiting for some time for it, I fixed it myself and pulled it.
I even fixed the changelog... Lucky you :-)
You can check the updated version below.
Sorry for the delay.
Thanks,
Benoit
---
>From 3b8f02a2df475c7a48e12eb1911c014f8060b167 Mon Sep 17 00:00:00 2001
From: Keerthy <j-keerthy@ti.com>
Date: Mon, 26 Aug 2013 11:06:51 +0530
Subject: [PATCH] ARM: DTS: DRA7: Add TPS659038 PMIC nodes
Add DT nodes for TPS659038 PMIC on DRA7 boards.
It is based on top of:
http://comments.gmane.org/gmane.linux.ports.arm.omap/102459.
Documentation:
- Documentation/devicetree/bindings/mfd/palmas.txt
- Documentation/devicetree/bindings/regulator/palmas-pmic.txt
Boot Tested on DRA7 d1 Board.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
[bcousson@baylibre.com: Fix indentation and changelog]
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
---
arch/arm/boot/dts/dra7-evm.dts | 112 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 112 insertions(+)
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index ca5dab2..fbbe406 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -93,6 +93,118 @@
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>;
+
+ tps659038: tps659038@58 {
+ compatible = "ti,tps659038";
+ reg = <0x58>;
+
+ tps659038_pmic {
+ compatible = "ti,tps659038-pmic";
+
+ regulators {
+ smps123_reg: smps123 {
+ /* VDD_MPU */
+ regulator-name = "smps123";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps45_reg: smps45 {
+ /* VDD_DSPEVE */
+ regulator-name = "smps45";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ };
+
+ smps6_reg: smps6 {
+ /* VDD_GPU - over VDD_SMPS6 */
+ regulator-name = "smps6";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <12500000>;
+ regulator-boot-on;
+ };
+
+ smps7_reg: smps7 {
+ /* CORE_VDD */
+ regulator-name = "smps7";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1030000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps8_reg: smps8 {
+ /* VDD_IVAHD */
+ regulator-name = "smps8";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-boot-on;
+ };
+
+ smps9_reg: smps9 {
+ /* VDDS1V8 */
+ regulator-name = "smps9";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo1_reg: ldo1 {
+ /* LDO1_OUT --> SDIO */
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo2_reg: ldo2 {
+ /* VDD_RTCIO */
+ /* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo3_reg: ldo3 {
+ /* VDDA_1V8_PHY */
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ ldo9_reg: ldo9 {
+ /* VDD_RTC */
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-boot-on;
+ };
+
+ ldoln_reg: ldoln {
+ /* VDDA_1V8_PLL */
+ regulator-name = "ldoln";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldousb_reg: ldousb {
+ /* VDDA_3V_USB: VDDA_USBHS33 */
+ regulator-name = "ldousb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+ };
+ };
+ };
};
&i2c2 {
--
1.8.1.2
WARNING: multiple messages have this Message-ID (diff)
From: bcousson@baylibre.com (Benoit Cousson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: DTS: DRA7: Add TPS659038 PMIC nodes
Date: Thu, 03 Oct 2013 15:39:35 +0200 [thread overview]
Message-ID: <524D7397.2000200@baylibre.com> (raw)
In-Reply-To: <522FFFE2.2000705@ti.com>
Hi Keerthy,
On 11/09/2013 07:30, Keerthy wrote:
> On Tuesday 10 September 2013 12:51 AM, Nishanth Menon wrote:
>> On 08/26/2013 12:36 AM, Keerthy wrote:
>>> The Patch adds nodes for TPS659038 PMIC for DRA7 boards.
>>>
>>> It is based on top of:
>>> http://comments.gmane.org/gmane.linux.ports.arm.omap/102459.
>>>
>>> Documentation: Documentation/devicetree/bindings/mfd/palmas.txt
>>> Documentation/devicetree/bindings/regulator/palmas-pmic.txt
>>>
>>> Boot Tested on DRA7 d1 Board.
>>>
>>> Signed-off-by: Keerthy <j-keerthy@ti.com>
>>> ---
>>> arch/arm/boot/dts/dra7-evm.dts | 118
>>> ++++++++++++++++++++++++++++++++++++++++
>>> 1 file changed, 118 insertions(+)
>>>
>>> Index: linux/arch/arm/boot/dts/dra7-evm.dts
>>> ===================================================================
>>> --- linux.orig/arch/arm/boot/dts/dra7-evm.dts 2013-08-26
>>> 09:57:52.496173554 +0530
>>> +++ linux/arch/arm/boot/dts/dra7-evm.dts 2013-08-26
>>> 10:38:44.995414695 +0530
>>> @@ -93,6 +93,119 @@
>>> pinctrl-names = "default";
>>> pinctrl-0 = <&i2c1_pins>;
>>> clock-frequency = <400000>;
>>> +
>>> + tps659038: tps659038 at 58 {
>>> + compatible = "ti,tps659038";
>>> + reg = <0x58>;
>>> +
>>> + tps659038_pmic {
>>> + compatible = "ti,tps659038-pmic";
>>> +
>>> + regulators {
>>> + smps123_reg: smps123 {
>>> + /* VDD_MPU */
>>> + regulator-name = "smps123";
>>> + regulator-min-microvolt = < 850000>;
>>> + regulator-max-microvolt = <1250000>;
>>> + regulator-always-on;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + smps45_reg: smps45 {
>>> + /* VDD_DSPEVE */
>>> + regulator-name = "smps45";
>>> + regulator-min-microvolt = < 850000>;
>>> + regulator-max-microvolt = <1150000>;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + smps6_reg: smps6 {
>>> + /* VDD_GPU - over VDD_SMPS6 */
>>> + regulator-name = "smps6";
>>> + regulator-min-microvolt = <850000>;
>>> + regulator-max-microvolt = <12500000>;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + smps7_reg: smps7 {
>>> + /* CORE_VDD */
>>> + regulator-name = "smps7";
>>> + regulator-min-microvolt = <850000>;
>>> + regulator-max-microvolt = <1030000>;
>>> + regulator-always-on;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + smps8_reg: smps8 {
>>> + /* VDD_IVAHD */
>>> + regulator-name = "smps8";
>>> + regulator-min-microvolt = < 850000>;
>>> + regulator-max-microvolt = <1250000>;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + smps9_reg: smps9 {
>>> + /* VDDS1V8 */
>>> + regulator-name = "smps9";
>>> + regulator-min-microvolt = <1800000>;
>>> + regulator-max-microvolt = <1800000>;
>>> + regulator-always-on;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + ldo1_reg: ldo1 {
>>> + /* LDO1_OUT --> SDIO */
>>> + regulator-name = "ldo1";
>>> + regulator-min-microvolt = <1800000>;
>>> + regulator-max-microvolt = <3300000>;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + ldo2_reg: ldo2 {
>>> + /* VDD_RTCIO */
>>> + /* LDO2 -> VDDSHV5, LDO2 also goes to
>>> CAN_PHY_3V3 */
>>> + regulator-name = "ldo2";
>>> + regulator-min-microvolt = <3300000>;
>>> + regulator-max-microvolt = <3300000>;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + ldo3_reg: ldo3 {
>>> + /* VDDA_1V8_PHY */
>>> + regulator-name = "ldo3";
>>> + regulator-min-microvolt = <1800000>;
>>> + regulator-max-microvolt = <1800000>;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + ldo9_reg: ldo9 {
>>> + /* VDD_RTC */
>>> + regulator-name = "ldo9";
>>> + regulator-min-microvolt = <1050000>;
>>> + regulator-max-microvolt = <1050000>;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + ldoln_reg: ldoln {
>>> + /* VDDA_1V8_PLL */
>>> + regulator-name = "ldoln";
>>> + regulator-min-microvolt = <1800000>;
>>> + regulator-max-microvolt = <1800000>;
>>> + regulator-always-on;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + ldousb_reg: ldousb {
>>> + /* VDDA_3V_USB: VDDA_USBHS33 */
>>> + regulator-name = "ldousb";
>>> + regulator-min-microvolt = <3300000>;
>>> + regulator-max-microvolt = <3300000>;
>>> + regulator-boot-on;
>>> + };
>>> +
Nit: Extra blank line not needed.
>>> + };
>>> + };
>>> + };
>>> };
Nit: You have an extra level on indentation not needed.
>>> &i2c2 {
>>>
>> Acked-by: Nishanth Menon <nm@ti.com>
Beside the two minors nits, the patch looks good to me.
Since, you've been waiting for some time for it, I fixed it myself and pulled it.
I even fixed the changelog... Lucky you :-)
You can check the updated version below.
Sorry for the delay.
Thanks,
Benoit
---
>From 3b8f02a2df475c7a48e12eb1911c014f8060b167 Mon Sep 17 00:00:00 2001
From: Keerthy <j-keerthy@ti.com>
Date: Mon, 26 Aug 2013 11:06:51 +0530
Subject: [PATCH] ARM: DTS: DRA7: Add TPS659038 PMIC nodes
Add DT nodes for TPS659038 PMIC on DRA7 boards.
It is based on top of:
http://comments.gmane.org/gmane.linux.ports.arm.omap/102459.
Documentation:
- Documentation/devicetree/bindings/mfd/palmas.txt
- Documentation/devicetree/bindings/regulator/palmas-pmic.txt
Boot Tested on DRA7 d1 Board.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
[bcousson at baylibre.com: Fix indentation and changelog]
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
---
arch/arm/boot/dts/dra7-evm.dts | 112 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 112 insertions(+)
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index ca5dab2..fbbe406 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -93,6 +93,118 @@
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>;
+
+ tps659038: tps659038 at 58 {
+ compatible = "ti,tps659038";
+ reg = <0x58>;
+
+ tps659038_pmic {
+ compatible = "ti,tps659038-pmic";
+
+ regulators {
+ smps123_reg: smps123 {
+ /* VDD_MPU */
+ regulator-name = "smps123";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps45_reg: smps45 {
+ /* VDD_DSPEVE */
+ regulator-name = "smps45";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ };
+
+ smps6_reg: smps6 {
+ /* VDD_GPU - over VDD_SMPS6 */
+ regulator-name = "smps6";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <12500000>;
+ regulator-boot-on;
+ };
+
+ smps7_reg: smps7 {
+ /* CORE_VDD */
+ regulator-name = "smps7";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1030000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps8_reg: smps8 {
+ /* VDD_IVAHD */
+ regulator-name = "smps8";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-boot-on;
+ };
+
+ smps9_reg: smps9 {
+ /* VDDS1V8 */
+ regulator-name = "smps9";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo1_reg: ldo1 {
+ /* LDO1_OUT --> SDIO */
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo2_reg: ldo2 {
+ /* VDD_RTCIO */
+ /* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo3_reg: ldo3 {
+ /* VDDA_1V8_PHY */
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ ldo9_reg: ldo9 {
+ /* VDD_RTC */
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-boot-on;
+ };
+
+ ldoln_reg: ldoln {
+ /* VDDA_1V8_PLL */
+ regulator-name = "ldoln";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldousb_reg: ldousb {
+ /* VDDA_3V_USB: VDDA_USBHS33 */
+ regulator-name = "ldousb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+ };
+ };
+ };
};
&i2c2 {
--
1.8.1.2
next prev parent reply other threads:[~2013-10-03 13:39 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-26 5:36 [PATCH] ARM: DTS: DRA7: Add TPS659038 PMIC nodes Keerthy
2013-08-26 5:36 ` Keerthy
2013-08-26 5:36 ` Keerthy
2013-09-03 6:33 ` Keerthy
2013-09-03 6:33 ` Keerthy
2013-09-03 6:33 ` Keerthy
2013-09-09 19:21 ` Nishanth Menon
2013-09-09 19:21 ` Nishanth Menon
2013-09-09 19:21 ` Nishanth Menon
2013-09-11 5:30 ` Keerthy
2013-09-11 5:30 ` Keerthy
2013-09-11 5:30 ` Keerthy
2013-10-03 13:39 ` Benoit Cousson [this message]
2013-10-03 13:39 ` Benoit Cousson
[not found] ` <524D7397.2000200-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
2013-10-04 8:25 ` Keerthy
2013-10-04 8:25 ` Keerthy
2013-10-04 8:25 ` Keerthy
-- strict thread matches above, loose matches on Subject: below --
2013-08-13 5:42 Keerthy
2013-08-13 5:42 ` Keerthy
2013-08-14 23:35 ` Nishanth Menon
2013-08-14 23:35 ` Nishanth Menon
2013-08-16 8:46 ` Balaji T K
2013-08-16 9:01 ` Keerthy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=524D7397.2000200@baylibre.com \
--to=bcousson@baylibre.com \
--cc=balajitk@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=j-keerthy@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=nm@ti.com \
--cc=pawel.moll@arm.com \
--cc=rob.herring@calxeda.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.