* meta-toolchain-qt with Qt Creator @ 2013-10-04 12:45 Diego Sueiro 2013-10-04 14:18 ` Jose Mª Ferreiro 0 siblings, 1 reply; 9+ messages in thread From: Diego Sueiro @ 2013-10-04 12:45 UTC (permalink / raw) To: yocto@yoctoproject.org [-- Attachment #1: Type: text/plain, Size: 1735 bytes --] Folks, After a lots of internet search, including this ML threads, i did not find any solution for this. I'm having issues to integrate meta-toolchain-qt and meta-toolchain-qte with Qt Creator 2.8.1. I'm using this environment: Build Configuration: BB_VERSION = "1.18.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "Ubuntu-12.10" TARGET_SYS = "arm-poky-linux-gnueabi" MACHINE = "beaglebone" DISTRO = "poky" DISTRO_VERSION = "1.4.2" TUNE_FEATURES = "armv7a vfp neon" TARGET_FPU = "vfp-neon" meta meta-yocto meta-yocto-bsp = "dylan:560fa9ad8dd46f23cff7a2e88a3492c363314b29" meta-ti = "dylan:24edd661d5e8fce3689bdd2c89e0105af8080152" When I configure the qmake path on Qt Creator I get the following message: "Qt version is not properly installed please run make install" I've tried on dylan branch too, but no success. So, I tried to use Angstrom's setup-scripts on angstrom-v2013.06-yocto1.4 branch. And it came with the issue related with "error while loading shared libraries: __vdso_time: invalid mode for dlopen(): Invalid argument". So, I switched to Fedora 19 and it has gone, but the invalid Qt version problem remains. I tried, without success, to compile by myself the qt-everywhere-opensource-src-4.8 these toolchains: angstrom-eglibc-x86_64-cortexa8hf-vfp-neon-toolchain-qte-v2013.06 poky-eglibc-x86_64-arm-toolchain-qte-1.4.2 If someone could successfully use meta-toolchain-qte with Qt Creator, please point me the right directions to achieve this. I really need some help to get a qt4-embedded toolchain working. Kind Regards, -- *dS Diego Sueiro /*long live rock 'n roll*/ [-- Attachment #2: Type: text/html, Size: 4177 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: meta-toolchain-qt with Qt Creator 2013-10-04 12:45 meta-toolchain-qt with Qt Creator Diego Sueiro @ 2013-10-04 14:18 ` Jose Mª Ferreiro 2013-10-04 14:30 ` Diego Sueiro 0 siblings, 1 reply; 9+ messages in thread From: Jose Mª Ferreiro @ 2013-10-04 14:18 UTC (permalink / raw) To: yocto [-- Attachment #1: Type: text/plain, Size: 2516 bytes --] Hello Diego We have had success doing a mix from these documents: - install host qt libraries: http://qt-project.org/doc/qt-4.8/install-x11.html - install host qt creator: http://labs.isee.biz/index.php/How_to_install_Qt_Creator#Configure_Yocto_SDK - yocto steps: https://community.freescale.com/thread/309578 , on a imx6Q Sabe Lite board being the host an Ubuntu 12.04. Good luck El 04/10/2013 14:45, Diego Sueiro escribió: > Folks, > > After a lots of internet search, including this ML threads, i did not > find any solution for this. > > I'm having issues to integrate meta-toolchain-qt > and meta-toolchain-qte with Qt Creator 2.8.1. > I'm using this environment: > > Build Configuration: > BB_VERSION = "1.18.0" > BUILD_SYS = "x86_64-linux" > NATIVELSBSTRING = "Ubuntu-12.10" > TARGET_SYS = "arm-poky-linux-gnueabi" > MACHINE = "beaglebone" > DISTRO = "poky" > DISTRO_VERSION = "1.4.2" > TUNE_FEATURES = "armv7a vfp neon" > TARGET_FPU = "vfp-neon" > meta > meta-yocto > meta-yocto-bsp = "dylan:560fa9ad8dd46f23cff7a2e88a3492c363314b29" > meta-ti = "dylan:24edd661d5e8fce3689bdd2c89e0105af8080152" > > > When I configure the qmake path on Qt Creator I get the following message: > > "Qt version is not properly installed please run make install" > > > I've tried on dylan branch too, but no success. > > So, I tried to use Angstrom's setup-scripts > on angstrom-v2013.06-yocto1.4 branch. And it came with the issue > related with "error while loading shared libraries: __vdso_time: > invalid mode for dlopen(): Invalid argument". So, I switched to Fedora > 19 and it has gone, but the invalid Qt version problem remains. > > I tried, without success, to compile by myself the > qt-everywhere-opensource-src-4.8 these toolchains: > > angstrom-eglibc-x86_64-cortexa8hf-vfp-neon-toolchain-qte-v2013.06 > poky-eglibc-x86_64-arm-toolchain-qte-1.4.2 > > > If someone could successfully use meta-toolchain-qte with Qt Creator, > please point me the right directions to achieve this. > > I really need some help to get a qt4-embedded toolchain working. > > Kind Regards, > > -- > *dS > Diego Sueiro > > /*long live rock 'n roll*/ > > > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto [-- Attachment #2: Type: text/html, Size: 7315 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: meta-toolchain-qt with Qt Creator 2013-10-04 14:18 ` Jose Mª Ferreiro @ 2013-10-04 14:30 ` Diego Sueiro 2013-10-04 14:36 ` Jose Mª Ferreiro 0 siblings, 1 reply; 9+ messages in thread From: Diego Sueiro @ 2013-10-04 14:30 UTC (permalink / raw) To: Jose Mª Ferreiro; +Cc: yocto@yoctoproject.org [-- Attachment #1: Type: text/plain, Size: 2881 bytes --] 2013/10/4 Jose Mª Ferreiro <jose.ferreiro@horus.es> > Hello Diego > > We have had success doing a mix from these documents: > - install host qt libraries: > http://qt-project.org/doc/qt-4.8/install-x11.html > - install host qt creator: > http://labs.isee.biz/index.php/How_to_install_Qt_Creator#Configure_Yocto_SDK > - yocto steps: https://community.freescale.com/thread/309578 , > > on a imx6Q Sabe Lite board being the host an Ubuntu 12.04. > > Good luck > Jose, Thanks for the info. Which poky branch/version are you using? Did you use the meta-toolchain from poky or the arm gcc from Ubuntu? Regards, -- *dS Diego Sueiro > > > El 04/10/2013 14:45, Diego Sueiro escribió: > > Folks, > > After a lots of internet search, including this ML threads, i did not > find any solution for this. > > I'm having issues to integrate meta-toolchain-qt and meta-toolchain-qte > with Qt Creator 2.8.1. > I'm using this environment: > > Build Configuration: > BB_VERSION = "1.18.0" > BUILD_SYS = "x86_64-linux" > NATIVELSBSTRING = "Ubuntu-12.10" > TARGET_SYS = "arm-poky-linux-gnueabi" > MACHINE = "beaglebone" > DISTRO = "poky" > DISTRO_VERSION = "1.4.2" > TUNE_FEATURES = "armv7a vfp neon" > TARGET_FPU = "vfp-neon" > meta > meta-yocto > meta-yocto-bsp = "dylan:560fa9ad8dd46f23cff7a2e88a3492c363314b29" > meta-ti = "dylan:24edd661d5e8fce3689bdd2c89e0105af8080152" > > > When I configure the qmake path on Qt Creator I get the following > message: > > "Qt version is not properly installed please run make install" > > > I've tried on dylan branch too, but no success. > > So, I tried to use Angstrom's setup-scripts > on angstrom-v2013.06-yocto1.4 branch. And it came with the issue related > with "error while loading shared libraries: __vdso_time: invalid mode for > dlopen(): Invalid argument". So, I switched to Fedora 19 and it has gone, > but the invalid Qt version problem remains. > > I tried, without success, to compile by myself the qt-everywhere-opensource-src-4.8 > these toolchains: > > angstrom-eglibc-x86_64-cortexa8hf-vfp-neon-toolchain-qte-v2013.06 > poky-eglibc-x86_64-arm-toolchain-qte-1.4.2 > > > If someone could successfully use meta-toolchain-qte with Qt Creator, > please point me the right directions to achieve this. > > I really need some help to get a qt4-embedded toolchain working. > > Kind Regards, > > -- > *dS > Diego Sueiro > > /*long live rock 'n roll*/ > > > _______________________________________________ > yocto mailing listyocto@yoctoproject.orghttps://lists.yoctoproject.org/listinfo/yocto > > > > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto > > [-- Attachment #2: Type: text/html, Size: 7820 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: meta-toolchain-qt with Qt Creator 2013-10-04 14:30 ` Diego Sueiro @ 2013-10-04 14:36 ` Jose Mª Ferreiro 2013-10-04 18:32 ` Diego Sueiro 0 siblings, 1 reply; 9+ messages in thread From: Jose Mª Ferreiro @ 2013-10-04 14:36 UTC (permalink / raw) To: yocto@yoctoproject.org [-- Attachment #1: Type: text/plain, Size: 3524 bytes --] El 04/10/2013 16:30, Diego Sueiro escribió: > 2013/10/4 Jose Mª Ferreiro <jose.ferreiro@horus.es > <mailto:jose.ferreiro@horus.es>> > > Hello Diego > > We have had success doing a mix from these documents: > - install host qt libraries: > http://qt-project.org/doc/qt-4.8/install-x11.html > - install host qt creator: > http://labs.isee.biz/index.php/How_to_install_Qt_Creator#Configure_Yocto_SDK > - yocto steps: https://community.freescale.com/thread/309578 , > > on a imx6Q Sabe Lite board being the host an Ubuntu 12.04. > > Good luck > > > Jose, > > Thanks for the info. > > Which poky branch/version are you using? > Did you use the meta-toolchain from poky or the arm gcc from Ubuntu? Hello Yocto dylan+ meta-toolchain-qt as Joerg's document says. Best regards > Regards, > > -- > *dS > Diego Sueiro > > > > El 04/10/2013 14:45, Diego Sueiro escribió: >> Folks, >> >> After a lots of internet search, including this ML threads, i did >> not find any solution for this. >> >> I'm having issues to integrate meta-toolchain-qt >> and meta-toolchain-qte with Qt Creator 2.8.1. >> I'm using this environment: >> >> Build Configuration: >> BB_VERSION = "1.18.0" >> BUILD_SYS = "x86_64-linux" >> NATIVELSBSTRING = "Ubuntu-12.10" >> TARGET_SYS = "arm-poky-linux-gnueabi" >> MACHINE = "beaglebone" >> DISTRO = "poky" >> DISTRO_VERSION = "1.4.2" >> TUNE_FEATURES = "armv7a vfp neon" >> TARGET_FPU = "vfp-neon" >> meta >> meta-yocto >> meta-yocto-bsp = >> "dylan:560fa9ad8dd46f23cff7a2e88a3492c363314b29" >> meta-ti = >> "dylan:24edd661d5e8fce3689bdd2c89e0105af8080152" >> >> >> When I configure the qmake path on Qt Creator I get the following >> message: >> >> "Qt version is not properly installed please run make install" >> >> >> I've tried on dylan branch too, but no success. >> >> So, I tried to use Angstrom's setup-scripts >> on angstrom-v2013.06-yocto1.4 branch. And it came with the issue >> related with "error while loading shared libraries: __vdso_time: >> invalid mode for dlopen(): Invalid argument". So, I switched to >> Fedora 19 and it has gone, but the invalid Qt version problem >> remains. >> >> I tried, without success, to compile by myself the >> qt-everywhere-opensource-src-4.8 these toolchains: >> >> angstrom-eglibc-x86_64-cortexa8hf-vfp-neon-toolchain-qte-v2013.06 >> poky-eglibc-x86_64-arm-toolchain-qte-1.4.2 >> >> >> If someone could successfully use meta-toolchain-qte with Qt >> Creator, please point me the right directions to achieve this. >> >> I really need some help to get a qt4-embedded toolchain working. >> >> Kind Regards, >> >> -- >> *dS >> Diego Sueiro >> >> /*long live rock 'n roll*/ >> >> >> _______________________________________________ >> yocto mailing list >> yocto@yoctoproject.org <mailto:yocto@yoctoproject.org> >> https://lists.yoctoproject.org/listinfo/yocto > > > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org <mailto:yocto@yoctoproject.org> > https://lists.yoctoproject.org/listinfo/yocto > > [-- Attachment #2: Type: text/html, Size: 12278 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: meta-toolchain-qt with Qt Creator 2013-10-04 14:36 ` Jose Mª Ferreiro @ 2013-10-04 18:32 ` Diego Sueiro 2013-10-04 20:26 ` Diego Sueiro 0 siblings, 1 reply; 9+ messages in thread From: Diego Sueiro @ 2013-10-04 18:32 UTC (permalink / raw) To: Jose Mª Ferreiro; +Cc: yocto@yoctoproject.org [-- Attachment #1: Type: text/plain, Size: 3823 bytes --] > > Hello > Yocto dylan+ meta-toolchain-qt as Joerg's document says. > Best regards Jose, I'm a little bit confused. Did you compiled qt-everywhere-opensource-src-4.8.4 for your host machine and added it's qmake to Qt creator? Then add yocto sysroot, gdb and gcc to Qt creator? Could you please pont me step-by-step how did you get it working? If add Yocto's qmake toolchain on Qt Creator I get the version error. DIego Sueiro 2013/10/4 Jose Mª Ferreiro <jose.ferreiro@horus.es> > > El 04/10/2013 16:30, Diego Sueiro escribió: > > 2013/10/4 Jose Mª Ferreiro <jose.ferreiro@horus.es> > >> Hello Diego >> >> We have had success doing a mix from these documents: >> - install host qt libraries: >> http://qt-project.org/doc/qt-4.8/install-x11.html >> - install host qt creator: >> http://labs.isee.biz/index.php/How_to_install_Qt_Creator#Configure_Yocto_SDK >> - yocto steps: https://community.freescale.com/thread/309578 , >> >> on a imx6Q Sabe Lite board being the host an Ubuntu 12.04. >> >> Good luck >> > > Jose, > > Thanks for the info. > > Which poky branch/version are you using? > Did you use the meta-toolchain from poky or the arm gcc from Ubuntu? > > > Hello > > Yocto dylan+ meta-toolchain-qt as Joerg's document says. > > Best regards > > Regards, > > -- > *dS > Diego Sueiro > > > >> >> >> El 04/10/2013 14:45, Diego Sueiro escribió: >> >> Folks, >> >> After a lots of internet search, including this ML threads, i did not >> find any solution for this. >> >> I'm having issues to integrate meta-toolchain-qt and meta-toolchain-qte >> with Qt Creator 2.8.1. >> I'm using this environment: >> >> Build Configuration: >> BB_VERSION = "1.18.0" >> BUILD_SYS = "x86_64-linux" >> NATIVELSBSTRING = "Ubuntu-12.10" >> TARGET_SYS = "arm-poky-linux-gnueabi" >> MACHINE = "beaglebone" >> DISTRO = "poky" >> DISTRO_VERSION = "1.4.2" >> TUNE_FEATURES = "armv7a vfp neon" >> TARGET_FPU = "vfp-neon" >> meta >> meta-yocto >> meta-yocto-bsp = "dylan:560fa9ad8dd46f23cff7a2e88a3492c363314b29" >> meta-ti = "dylan:24edd661d5e8fce3689bdd2c89e0105af8080152" >> >> >> When I configure the qmake path on Qt Creator I get the following >> message: >> >> "Qt version is not properly installed please run make install" >> >> >> I've tried on dylan branch too, but no success. >> >> So, I tried to use Angstrom's setup-scripts >> on angstrom-v2013.06-yocto1.4 branch. And it came with the issue related >> with "error while loading shared libraries: __vdso_time: invalid mode >> for dlopen(): Invalid argument". So, I switched to Fedora 19 and it has >> gone, but the invalid Qt version problem remains. >> >> I tried, without success, to compile by myself the qt-everywhere-opensource-src-4.8 >> these toolchains: >> >> angstrom-eglibc-x86_64-cortexa8hf-vfp-neon-toolchain-qte-v2013.06 >> poky-eglibc-x86_64-arm-toolchain-qte-1.4.2 >> >> >> If someone could successfully use meta-toolchain-qte with Qt Creator, >> please point me the right directions to achieve this. >> >> I really need some help to get a qt4-embedded toolchain working. >> >> Kind Regards, >> >> -- >> *dS >> Diego Sueiro >> >> /*long live rock 'n roll*/ >> >> >> _______________________________________________ >> yocto mailing listyocto@yoctoproject.orghttps://lists.yoctoproject.org/listinfo/yocto >> >> >> >> _______________________________________________ >> yocto mailing list >> yocto@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/yocto >> >> > > > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto > > [-- Attachment #2: Type: text/html, Size: 12893 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: meta-toolchain-qt with Qt Creator 2013-10-04 18:32 ` Diego Sueiro @ 2013-10-04 20:26 ` Diego Sueiro 2013-10-07 7:05 ` Laurentiu Palcu 0 siblings, 1 reply; 9+ messages in thread From: Diego Sueiro @ 2013-10-04 20:26 UTC (permalink / raw) To: Jose Mª Ferreiro; +Cc: yocto@yoctoproject.org [-- Attachment #1: Type: text/plain, Size: 4920 bytes --] Folks, I've found the issue. I was installing the poky toolchain outside the default path (/opt/opky/1.4.2). After installing on default path, Qt creator was enable to find the right QT version. I compiled an example and loaded it on board without any issues. I discovered it before seeing an warning message from Qt creator saying that it could not find the qmake.conf on /opt/opky/1.4.2/<...>/usr/mkspec/default/qmake.conf. Lesson learned: don't change the default toolchain insatallation path, otherwise something will not work properly. Can someone explain this behavior? Since you can choose a path to install the toolchain it must have to work out of the box. Abraços, -- *dS Diego Sueiro Administrador do Embarcados www.embarcados.com.br Engenheiro de Controle e Automação UNIVERSIDADE FEDERAL DE ITAJUBÀ /*long live rock 'n roll*/ 2013/10/4 Diego Sueiro <diego.sueiro@gmail.com> > Hello >> Yocto dylan+ meta-toolchain-qt as Joerg's document says. >> Best regards > > > Jose, > > I'm a little bit confused. > Did you compiled qt-everywhere-opensource-src-4.8.4 for your host machine > and added it's qmake to Qt creator? > Then add yocto sysroot, gdb and gcc to Qt creator? > Could you please pont me step-by-step how did you get it working? > > If add Yocto's qmake toolchain on Qt Creator I get the version error. > > DIego Sueiro > > 2013/10/4 Jose Mª Ferreiro <jose.ferreiro@horus.es> > >> >> El 04/10/2013 16:30, Diego Sueiro escribió: >> >> 2013/10/4 Jose Mª Ferreiro <jose.ferreiro@horus.es> >> >>> Hello Diego >>> >>> We have had success doing a mix from these documents: >>> - install host qt libraries: >>> http://qt-project.org/doc/qt-4.8/install-x11.html >>> - install host qt creator: >>> http://labs.isee.biz/index.php/How_to_install_Qt_Creator#Configure_Yocto_SDK >>> - yocto steps: https://community.freescale.com/thread/309578 , >>> >>> on a imx6Q Sabe Lite board being the host an Ubuntu 12.04. >>> >>> Good luck >>> >> >> Jose, >> >> Thanks for the info. >> >> Which poky branch/version are you using? >> Did you use the meta-toolchain from poky or the arm gcc from Ubuntu? >> >> >> Hello >> >> Yocto dylan+ meta-toolchain-qt as Joerg's document says. >> >> Best regards >> >> Regards, >> >> -- >> *dS >> Diego Sueiro >> >> >> >>> >>> >>> El 04/10/2013 14:45, Diego Sueiro escribió: >>> >>> Folks, >>> >>> After a lots of internet search, including this ML threads, i did not >>> find any solution for this. >>> >>> I'm having issues to integrate meta-toolchain-qt >>> and meta-toolchain-qte with Qt Creator 2.8.1. >>> I'm using this environment: >>> >>> Build Configuration: >>> BB_VERSION = "1.18.0" >>> BUILD_SYS = "x86_64-linux" >>> NATIVELSBSTRING = "Ubuntu-12.10" >>> TARGET_SYS = "arm-poky-linux-gnueabi" >>> MACHINE = "beaglebone" >>> DISTRO = "poky" >>> DISTRO_VERSION = "1.4.2" >>> TUNE_FEATURES = "armv7a vfp neon" >>> TARGET_FPU = "vfp-neon" >>> meta >>> meta-yocto >>> meta-yocto-bsp = "dylan:560fa9ad8dd46f23cff7a2e88a3492c363314b29" >>> meta-ti = "dylan:24edd661d5e8fce3689bdd2c89e0105af8080152" >>> >>> >>> When I configure the qmake path on Qt Creator I get the following >>> message: >>> >>> "Qt version is not properly installed please run make install" >>> >>> >>> I've tried on dylan branch too, but no success. >>> >>> So, I tried to use Angstrom's setup-scripts >>> on angstrom-v2013.06-yocto1.4 branch. And it came with the issue related >>> with "error while loading shared libraries: __vdso_time: invalid mode >>> for dlopen(): Invalid argument". So, I switched to Fedora 19 and it has >>> gone, but the invalid Qt version problem remains. >>> >>> I tried, without success, to compile by myself the qt-everywhere-opensource-src-4.8 >>> these toolchains: >>> >>> angstrom-eglibc-x86_64-cortexa8hf-vfp-neon-toolchain-qte-v2013.06 >>> poky-eglibc-x86_64-arm-toolchain-qte-1.4.2 >>> >>> >>> If someone could successfully use meta-toolchain-qte with Qt Creator, >>> please point me the right directions to achieve this. >>> >>> I really need some help to get a qt4-embedded toolchain working. >>> >>> Kind Regards, >>> >>> -- >>> *dS >>> Diego Sueiro >>> >>> /*long live rock 'n roll*/ >>> >>> >>> _______________________________________________ >>> yocto mailing listyocto@yoctoproject.orghttps://lists.yoctoproject.org/listinfo/yocto >>> >>> >>> >>> _______________________________________________ >>> yocto mailing list >>> yocto@yoctoproject.org >>> https://lists.yoctoproject.org/listinfo/yocto >>> >>> >> >> >> _______________________________________________ >> yocto mailing list >> yocto@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/yocto >> >> > [-- Attachment #2: Type: text/html, Size: 14704 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: meta-toolchain-qt with Qt Creator 2013-10-04 20:26 ` Diego Sueiro @ 2013-10-07 7:05 ` Laurentiu Palcu 2013-10-07 11:18 ` Diego Sueiro 0 siblings, 1 reply; 9+ messages in thread From: Laurentiu Palcu @ 2013-10-07 7:05 UTC (permalink / raw) To: Diego Sueiro; +Cc: yocto@yoctoproject.org Hi Diego, On Fri, Oct 04, 2013 at 05:26:06PM -0300, Diego Sueiro wrote: > Folks, > > I've found the issue. > I was installing the poky toolchain outside the default path (/opt/opky/1.4.2). > After installing on default path, Qt creator was enable to find the right QT > version. I compiled an example and loaded it on board without any issues. > > I discovered it before seeing an warning message from Qt creator saying that it > could not find the qmake.conf on /opt/opky/1.4.2/<...>/usr/mkspec/default/ > qmake.conf. > > Lesson learned: don't change the default toolchain insatallation path, > otherwise something will not work properly. > > Can someone explain this behavior? Since you can choose a path to install the > toolchain it must have to work out of the box. It's a little more complicated than that. After building the toolchain, all binaries have the default absolute path to the dynamic loader (/opt/poky/...) hardcoded in the elf INTERP section. This is easy to change. However, other binaries may or may not have other hardcoded paths to search for different things (like configs, etc.). Most of these could be easily fixed by providing the binary with an option or setting an environment variable to instruct it where to find what it needs. Take for example the gcc --sysroot option. By default gcc will search for the sysroot in the default location (starting with /opt/poky), but providing a --sysroot option, we override this default path. So, even though, for relocation, changing the INTERP section may suffice for most of the binaries, some may need more tweaking. A quick search on google brought me to this page: http://qt-project.org/doc/qt-4.8/qmake-environment-reference.html It turns out that QMAKESPEC environment variable is what QT creator looks at to be able to locate qmake.conf. So, perhaps, we need to add this to the environment file and the problem should be fixed... Can you please test this? Thanks, Laurentiu > > > > > > > > Abraços, > > -- > *dS > Diego Sueiro > > Administrador do Embarcados > www.embarcados.com.br > > Engenheiro de Controle e Automação > UNIVERSIDADE FEDERAL DE ITAJUBÀ > > /*long live rock 'n roll*/ > > > 2013/10/4 Diego Sueiro <diego.sueiro@gmail.com> > > Hello > Yocto dylan+ meta-toolchain-qt as Joerg's document says. > Best regards > > > Jose, > > I'm a little bit confused. > Did you compiled qt-everywhere-opensource-src-4.8.4 for your host machine > and added it's qmake to Qt creator? > Then add yocto sysroot, gdb and gcc to Qt creator? > Could you please pont me step-by-step how did you get it working? > > If add Yocto's qmake toolchain on Qt Creator I get the version error. > > DIego Sueiro > > 2013/10/4 Jose Mª Ferreiro <jose.ferreiro@horus.es> > > > El 04/10/2013 16:30, Diego Sueiro escribió: > > 2013/10/4 Jose Mª Ferreiro <jose.ferreiro@horus.es> > > Hello Diego > > We have had success doing a mix from these documents: > - install host qt libraries: http://qt-project.org/doc/qt-4.8/ > install-x11.html > - install host qt creator: http://labs.isee.biz/index.php/ > How_to_install_Qt_Creator#Configure_Yocto_SDK > - yocto steps: https://community.freescale.com/thread/309578 , > > on a imx6Q Sabe Lite board being the host an Ubuntu 12.04. > > Good luck > > > Jose, > > Thanks for the info. > > Which poky branch/version are you using? > Did you use the meta-toolchain from poky or the arm gcc from > Ubuntu? > > > Hello > > Yocto dylan+ meta-toolchain-qt as Joerg's document says. > > Best regards > > > Regards, > > -- > *dS > Diego Sueiro > > > > > > El 04/10/2013 14:45, Diego Sueiro escribió: > > Folks, > > After a lots of internet search, including this ML threads, > i did not find any solution for this. > > I'm having issues to integrate meta-toolchain-qt > and meta-toolchain-qte with Qt Creator 2.8.1. > I'm using this environment: > > Build Configuration: > BB_VERSION = "1.18.0" > BUILD_SYS = "x86_64-linux" > NATIVELSBSTRING = "Ubuntu-12.10" > TARGET_SYS = "arm-poky-linux-gnueabi" > MACHINE = "beaglebone" > DISTRO = "poky" > DISTRO_VERSION = "1.4.2" > TUNE_FEATURES = "armv7a vfp neon" > TARGET_FPU = "vfp-neon" > meta > meta-yocto > meta-yocto-bsp = > "dylan:560fa9ad8dd46f23cff7a2e88a3492c363314b29" > meta-ti = > "dylan:24edd661d5e8fce3689bdd2c89e0105af8080152" > > > When I configure the qmake path on Qt Creator I get the > following message: > > "Qt version is not properly installed please run make > install" > > > I've tried on dylan branch too, but no success. > > So, I tried to use Angstrom's setup-scripts > on angstrom-v2013.06-yocto1.4 branch. And it came with the > issue related with "error while loading shared libraries: > __vdso_time: invalid mode for dlopen(): Invalid argument". > So, I switched to Fedora 19 and it has gone, but the > invalid Qt version problem remains. > > I tried, without success, to compile by myself the > qt-everywhere-opensource-src-4.8 these toolchains: > > angstrom-eglibc-x86_64-cortexa8hf-vfp-neon-toolchain-qte-v2013.06 > poky-eglibc-x86_64-arm-toolchain-qte-1.4.2 > > > If someone could successfully use meta-toolchain-qte with > Qt Creator, please point me the right directions to achieve > this. > > I really need some help to get a qt4-embedded toolchain > working. > > Kind Regards, > > -- > *dS > Diego Sueiro > > /*long live rock 'n roll*/ > > > > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto > > > > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto > > > > > > > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto > > > > > > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: meta-toolchain-qt with Qt Creator 2013-10-07 7:05 ` Laurentiu Palcu @ 2013-10-07 11:18 ` Diego Sueiro 2013-10-07 12:12 ` Laurentiu Palcu 0 siblings, 1 reply; 9+ messages in thread From: Diego Sueiro @ 2013-10-07 11:18 UTC (permalink / raw) To: Laurentiu Palcu; +Cc: yocto@yoctoproject.org [-- Attachment #1: Type: text/plain, Size: 1867 bytes --] 2013/10/7 Laurentiu Palcu <laurentiu.palcu@intel.com> > Hi Diego, > It's a little more complicated than that. After building the toolchain, > all binaries have the default absolute path to the dynamic loader > (/opt/poky/...) hardcoded in the elf INTERP section. This is easy to > change. However, other binaries may or may not have other hardcoded > paths to search for different things (like configs, etc.). Most of these > could be easily fixed by providing the binary with an option or setting > an environment variable to instruct it where to find what it needs. Take > for example the gcc --sysroot option. By default gcc will search for the > sysroot in the default location (starting with /opt/poky), but providing > a --sysroot option, we override this default path. > > So, even though, for relocation, changing the INTERP section may suffice > for most of the binaries, some may need more tweaking. > > A quick search on google brought me to this page: > http://qt-project.org/doc/qt-4.8/qmake-environment-reference.html > > It turns out that QMAKESPEC environment variable is what QT creator > looks at to be able to locate qmake.conf. So, perhaps, we need to add > this to the environment file and the problem should be fixed... > > Can you please test this? > > Thanks, > Laurentiu > > Laurentiu, Thanks for the explanation. I took a look at environment-setup-armv7a-vfp-neon-poky-linux-gnueabi file and it is already exporting the QMAKESPEC variable to the right path. Maybe this variable is overridden by another one or by Qt Creator based on some INTERP. I did a "grep -r \/poky\/1\.4\.2 ./*" on the toolchain (installed outside default path) and this is the results: http://pastebin.com/us9p5vVp Unfortunately I don't have enough knowledge to track this. Regards, -- *dS Diego Sueiro [-- Attachment #2: Type: text/html, Size: 3331 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: meta-toolchain-qt with Qt Creator 2013-10-07 11:18 ` Diego Sueiro @ 2013-10-07 12:12 ` Laurentiu Palcu 0 siblings, 0 replies; 9+ messages in thread From: Laurentiu Palcu @ 2013-10-07 12:12 UTC (permalink / raw) To: Diego Sueiro; +Cc: yocto@yoctoproject.org Hi Diego, On Mon, Oct 07, 2013 at 08:18:00AM -0300, Diego Sueiro wrote: > 2013/10/7 Laurentiu Palcu <laurentiu.palcu@intel.com> > > Hi Diego, > It's a little more complicated than that. After building the toolchain, > all binaries have the default absolute path to the dynamic loader > (/opt/poky/...) hardcoded in the elf INTERP section. This is easy to > change. However, other binaries may or may not have other hardcoded > paths to search for different things (like configs, etc.). Most of these > could be easily fixed by providing the binary with an option or setting > an environment variable to instruct it where to find what it needs. Take > for example the gcc --sysroot option. By default gcc will search for the > sysroot in the default location (starting with /opt/poky), but providing > a --sysroot option, we override this default path. > > So, even though, for relocation, changing the INTERP section may suffice > for most of the binaries, some may need more tweaking. > > A quick search on google brought me to this page: > http://qt-project.org/doc/qt-4.8/qmake-environment-reference.html > > It turns out that QMAKESPEC environment variable is what QT creator > looks at to be able to locate qmake.conf. So, perhaps, we need to add > this to the environment file and the problem should be fixed... > > Can you please test this? > > Thanks, > Laurentiu > > > > Laurentiu, > > Thanks for the explanation. > > I took a look at environment-setup-armv7a-vfp-neon-poky-linux-gnueabi file and > it is already exporting the QMAKESPEC variable to the right path. Stupid me, I should've looked in the meta-toolchain-qt.inc first. Yes, it appears to be set... > Maybe this variable is overridden by another one or by Qt Creator based on some > INTERP. > > I did a "grep -r \/poky\/1\.4\.2 ./*" on the toolchain (installed outside > default path) and this is the results: > > http://pastebin.com/us9p5vVp > > > > Unfortunately I don't have enough knowledge to track this. Would you please file a bug on this? I'll have a look as soon as I find some time. Thanks, Laurentiu > > > Regards, > > -- > *dS > Diego Sueiro > ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2013-10-07 12:12 UTC | newest] Thread overview: 9+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-10-04 12:45 meta-toolchain-qt with Qt Creator Diego Sueiro 2013-10-04 14:18 ` Jose Mª Ferreiro 2013-10-04 14:30 ` Diego Sueiro 2013-10-04 14:36 ` Jose Mª Ferreiro 2013-10-04 18:32 ` Diego Sueiro 2013-10-04 20:26 ` Diego Sueiro 2013-10-07 7:05 ` Laurentiu Palcu 2013-10-07 11:18 ` Diego Sueiro 2013-10-07 12:12 ` Laurentiu Palcu
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.