All of lore.kernel.org
 help / color / mirror / Atom feed
From: Joel Fernandes <joelf@ti.com>
To: Mark Rutland <mark.rutland@arm.com>
Cc: "open list:OPEN FIRMWARE AND..." <devicetree@vger.kernel.org>,
	Paul Walmsley <paul@pwsan.com>,
	Russell King <linux@arm.linux.org.uk>,
	Rob Landley <rob@landley.net>, Pawel Moll <Pawel.Moll@arm.com>,
	Stephen Warren <swarren@wwwdotorg.org>,
	Tony Lindgren <tony@atomide.com>,
	open list <linux-kernel@vger.kernel.org>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Linux MMC List <linux-mmc@vger.kernel.org>,
	"Mark A. Greer" <mgreer@animalcreek.com>,
	"rob.herring@calxeda.com" <rob.herring@calxeda.com>,
	DOCUMENTATION <linux-doc@vger.kernel.org>,
	Benoit Cousson <bcousson@baylibre.com>,
	Linux OMAP List <linux-omap@vger.kernel.org>,
	Linux ARM Kernel List <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v2 3/9] ARM: dts: Add SHAM data and documentation for AM33XX
Date: Sat, 5 Oct 2013 13:18:08 -0500	[thread overview]
Message-ID: <525057E0.80009@ti.com> (raw)
In-Reply-To: <20131004142644.GI6999@e106331-lin.cambridge.arm.com>

On 10/04/2013 09:26 AM, Mark Rutland wrote:
> On Mon, Sep 30, 2013 at 04:13:00PM +0100, Joel Fernandes wrote:
>> From: "Mark A. Greer" <mgreer@animalcreek.com>
>>
>> Add the generic AM33XX SHAM module's device tree data and
>> enable it for the am335x-evm, am335x-evmsk, and am335x-bone
>> platforms.  Also add Documentation file describing the data
>> for the SHAM module.
>>
>> [joelf@ti.com: Dropped interrupt-parrent property]
>> CC: Paul Walmsley <paul@pwsan.com>
>> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
>> ---
>>  .../devicetree/bindings/crypto/omap-sham.txt       | 31 ++++++++++++++++++++++
>>  arch/arm/boot/dts/am335x-bone.dts                  |  4 +++
>>  arch/arm/boot/dts/am335x-evm.dts                   |  4 +++
>>  arch/arm/boot/dts/am335x-evmsk.dts                 |  4 +++
>>  arch/arm/boot/dts/am33xx.dtsi                      |  9 +++++++
>>  5 files changed, 52 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/crypto/omap-sham.txt
>>
>> diff --git a/Documentation/devicetree/bindings/crypto/omap-sham.txt b/Documentation/devicetree/bindings/crypto/omap-sham.txt
>> new file mode 100644
>> index 0000000..b97710f
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/crypto/omap-sham.txt
>> @@ -0,0 +1,31 @@
>> +OMAP SoC SHA crypto Module
>> +
>> +Required properties:
>> +
>> +- compatible : Should contain entries for this and backward compatible
>> +  SHAM versions:
>> +  - "ti,omap2-sham" for OMAP2 & OMAP3.
>> +  - "ti,omap4-sham" for OMAP4 and AM33XX.
>> +  Note that these two versions are incompatible.
>> +- ti,hwmods: Name of the hwmod associated with the SHAM module
>> +- reg : Offset and length of the register set for the module
>> +- interrupt-parent : the phandle for the interrupt controller that
>> +  services interrupts for this module.
> 
> I don't think this is strictly speaking necessary -- it's mostly going
> to be implicit (it is in the dtsi below). As this is a standard
> property, you don't need to document it here.

Ok, dropping from documentation.

>> +- interrupts : the interrupt number for the SHAM module.
> 
> Sorry, I missed this last time, but this should be interrupt-specifier
> rather than interrupt number.

Ok, done.

> 
> Otherwise, this looks good to me. With the fixups above:
> 
> Acked-by: Mark Rutland <mark.rutland@arm.com>

Thanks!

-Joel

> 
>> +
>> +Optional properties:
>> +- dmas: DMA specifier for the rx dma. See the DMA client binding,
>> +	Documentation/devicetree/bindings/dma/dma.txt
>> +- dma-names: DMA request name. Should be "rx" if a dma is present.
>> +
>> +Example:
>> +	/* AM335x */
>> +	sham: sham@53100000 {
>> +		compatible = "ti,omap4-sham";
>> +		ti,hwmods = "sham";
>> +		reg = <0x53100000 0x200>;
>> +		interrupt-parent = <&intc>;
>> +		interrupts = <109>;
>> +		dmas = <&edma 36>;
>> +		dma-names = "rx";
>> +	};
>> diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
>> index 0d63348..8a9802e 100644
>> --- a/arch/arm/boot/dts/am335x-bone.dts
>> +++ b/arch/arm/boot/dts/am335x-bone.dts
>> @@ -19,3 +19,7 @@
>>  &mmc1 {
>>  	vmmc-supply = <&ldo3_reg>;
>>  };
>> +
>> +&sham {
>> +	status = "okay";
>> +};
>> diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
>> index 23b0a3e..d59e51c 100644
>> --- a/arch/arm/boot/dts/am335x-evm.dts
>> +++ b/arch/arm/boot/dts/am335x-evm.dts
>> @@ -522,3 +522,7 @@
>>  	status = "okay";
>>  	vmmc-supply = <&vmmc_reg>;
>>  };
>> +
>> +&sham {
>> +	status = "okay";
>> +};
>> diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
>> index bc93895..d45a330 100644
>> --- a/arch/arm/boot/dts/am335x-evmsk.dts
>> +++ b/arch/arm/boot/dts/am335x-evmsk.dts
>> @@ -424,3 +424,7 @@
>>  	status = "okay";
>>  	vmmc-supply = <&vmmc_reg>;
>>  };
>> +
>> +&sham {
>> +	status = "okay";
>> +};
>> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
>> index 553adc6..299710b 100644
>> --- a/arch/arm/boot/dts/am33xx.dtsi
>> +++ b/arch/arm/boot/dts/am33xx.dtsi
>> @@ -710,5 +710,14 @@
>>  			#size-cells = <1>;
>>  			status = "disabled";
>>  		};
>> +
>> +		sham: sham@53100000 {
>> +			compatible = "ti,omap4-sham";
>> +			ti,hwmods = "sham";
>> +			reg = <0x53100000 0x200>;
>> +			interrupts = <109>;
>> +			dmas = <&edma 36>;
>> +			dma-names = "rx";
>> +		};
>>  	};
>>  };
>> -- 
>> 1.8.1.2
>>
>>

WARNING: multiple messages have this Message-ID (diff)
From: joelf@ti.com (Joel Fernandes)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/9] ARM: dts: Add SHAM data and documentation for AM33XX
Date: Sat, 5 Oct 2013 13:18:08 -0500	[thread overview]
Message-ID: <525057E0.80009@ti.com> (raw)
In-Reply-To: <20131004142644.GI6999@e106331-lin.cambridge.arm.com>

On 10/04/2013 09:26 AM, Mark Rutland wrote:
> On Mon, Sep 30, 2013 at 04:13:00PM +0100, Joel Fernandes wrote:
>> From: "Mark A. Greer" <mgreer@animalcreek.com>
>>
>> Add the generic AM33XX SHAM module's device tree data and
>> enable it for the am335x-evm, am335x-evmsk, and am335x-bone
>> platforms.  Also add Documentation file describing the data
>> for the SHAM module.
>>
>> [joelf at ti.com: Dropped interrupt-parrent property]
>> CC: Paul Walmsley <paul@pwsan.com>
>> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
>> ---
>>  .../devicetree/bindings/crypto/omap-sham.txt       | 31 ++++++++++++++++++++++
>>  arch/arm/boot/dts/am335x-bone.dts                  |  4 +++
>>  arch/arm/boot/dts/am335x-evm.dts                   |  4 +++
>>  arch/arm/boot/dts/am335x-evmsk.dts                 |  4 +++
>>  arch/arm/boot/dts/am33xx.dtsi                      |  9 +++++++
>>  5 files changed, 52 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/crypto/omap-sham.txt
>>
>> diff --git a/Documentation/devicetree/bindings/crypto/omap-sham.txt b/Documentation/devicetree/bindings/crypto/omap-sham.txt
>> new file mode 100644
>> index 0000000..b97710f
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/crypto/omap-sham.txt
>> @@ -0,0 +1,31 @@
>> +OMAP SoC SHA crypto Module
>> +
>> +Required properties:
>> +
>> +- compatible : Should contain entries for this and backward compatible
>> +  SHAM versions:
>> +  - "ti,omap2-sham" for OMAP2 & OMAP3.
>> +  - "ti,omap4-sham" for OMAP4 and AM33XX.
>> +  Note that these two versions are incompatible.
>> +- ti,hwmods: Name of the hwmod associated with the SHAM module
>> +- reg : Offset and length of the register set for the module
>> +- interrupt-parent : the phandle for the interrupt controller that
>> +  services interrupts for this module.
> 
> I don't think this is strictly speaking necessary -- it's mostly going
> to be implicit (it is in the dtsi below). As this is a standard
> property, you don't need to document it here.

Ok, dropping from documentation.

>> +- interrupts : the interrupt number for the SHAM module.
> 
> Sorry, I missed this last time, but this should be interrupt-specifier
> rather than interrupt number.

Ok, done.

> 
> Otherwise, this looks good to me. With the fixups above:
> 
> Acked-by: Mark Rutland <mark.rutland@arm.com>

Thanks!

-Joel

> 
>> +
>> +Optional properties:
>> +- dmas: DMA specifier for the rx dma. See the DMA client binding,
>> +	Documentation/devicetree/bindings/dma/dma.txt
>> +- dma-names: DMA request name. Should be "rx" if a dma is present.
>> +
>> +Example:
>> +	/* AM335x */
>> +	sham: sham at 53100000 {
>> +		compatible = "ti,omap4-sham";
>> +		ti,hwmods = "sham";
>> +		reg = <0x53100000 0x200>;
>> +		interrupt-parent = <&intc>;
>> +		interrupts = <109>;
>> +		dmas = <&edma 36>;
>> +		dma-names = "rx";
>> +	};
>> diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
>> index 0d63348..8a9802e 100644
>> --- a/arch/arm/boot/dts/am335x-bone.dts
>> +++ b/arch/arm/boot/dts/am335x-bone.dts
>> @@ -19,3 +19,7 @@
>>  &mmc1 {
>>  	vmmc-supply = <&ldo3_reg>;
>>  };
>> +
>> +&sham {
>> +	status = "okay";
>> +};
>> diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
>> index 23b0a3e..d59e51c 100644
>> --- a/arch/arm/boot/dts/am335x-evm.dts
>> +++ b/arch/arm/boot/dts/am335x-evm.dts
>> @@ -522,3 +522,7 @@
>>  	status = "okay";
>>  	vmmc-supply = <&vmmc_reg>;
>>  };
>> +
>> +&sham {
>> +	status = "okay";
>> +};
>> diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
>> index bc93895..d45a330 100644
>> --- a/arch/arm/boot/dts/am335x-evmsk.dts
>> +++ b/arch/arm/boot/dts/am335x-evmsk.dts
>> @@ -424,3 +424,7 @@
>>  	status = "okay";
>>  	vmmc-supply = <&vmmc_reg>;
>>  };
>> +
>> +&sham {
>> +	status = "okay";
>> +};
>> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
>> index 553adc6..299710b 100644
>> --- a/arch/arm/boot/dts/am33xx.dtsi
>> +++ b/arch/arm/boot/dts/am33xx.dtsi
>> @@ -710,5 +710,14 @@
>>  			#size-cells = <1>;
>>  			status = "disabled";
>>  		};
>> +
>> +		sham: sham at 53100000 {
>> +			compatible = "ti,omap4-sham";
>> +			ti,hwmods = "sham";
>> +			reg = <0x53100000 0x200>;
>> +			interrupts = <109>;
>> +			dmas = <&edma 36>;
>> +			dma-names = "rx";
>> +		};
>>  	};
>>  };
>> -- 
>> 1.8.1.2
>>
>>

WARNING: multiple messages have this Message-ID (diff)
From: Joel Fernandes <joelf@ti.com>
To: Mark Rutland <mark.rutland@arm.com>
Cc: Linux OMAP List <linux-omap@vger.kernel.org>,
	Linux ARM Kernel List <linux-arm-kernel@lists.infradead.org>,
	Linux MMC List <linux-mmc@vger.kernel.org>,
	Benoit Cousson <bcousson@baylibre.com>,
	Paul Walmsley <paul@pwsan.com>,
	"rob.herring@calxeda.com" <rob.herring@calxeda.com>,
	Pawel Moll <Pawel.Moll@arm.com>,
	Stephen Warren <swarren@wwwdotorg.org>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Rob Landley <rob@landley.net>, Tony Lindgren <tony@atomide.com>,
	Russell King <linux@arm.linux.org.uk>,
	"Mark A. Greer" <mgreer@animalcreek.com>,
	"open list:OPEN FIRMWARE AND..." <devicetree@vger.kernel.org>,
	open list: DOCUMENTATION <linux-doc@vger.kernel.org>,
	open list <linux-kernel@vger.kernel.org>, ;
Subject: Re: [PATCH v2 3/9] ARM: dts: Add SHAM data and documentation for AM33XX
Date: Sat, 5 Oct 2013 13:18:08 -0500	[thread overview]
Message-ID: <525057E0.80009@ti.com> (raw)
In-Reply-To: <20131004142644.GI6999@e106331-lin.cambridge.arm.com>

On 10/04/2013 09:26 AM, Mark Rutland wrote:
> On Mon, Sep 30, 2013 at 04:13:00PM +0100, Joel Fernandes wrote:
>> From: "Mark A. Greer" <mgreer@animalcreek.com>
>>
>> Add the generic AM33XX SHAM module's device tree data and
>> enable it for the am335x-evm, am335x-evmsk, and am335x-bone
>> platforms.  Also add Documentation file describing the data
>> for the SHAM module.
>>
>> [joelf@ti.com: Dropped interrupt-parrent property]
>> CC: Paul Walmsley <paul@pwsan.com>
>> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
>> ---
>>  .../devicetree/bindings/crypto/omap-sham.txt       | 31 ++++++++++++++++++++++
>>  arch/arm/boot/dts/am335x-bone.dts                  |  4 +++
>>  arch/arm/boot/dts/am335x-evm.dts                   |  4 +++
>>  arch/arm/boot/dts/am335x-evmsk.dts                 |  4 +++
>>  arch/arm/boot/dts/am33xx.dtsi                      |  9 +++++++
>>  5 files changed, 52 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/crypto/omap-sham.txt
>>
>> diff --git a/Documentation/devicetree/bindings/crypto/omap-sham.txt b/Documentation/devicetree/bindings/crypto/omap-sham.txt
>> new file mode 100644
>> index 0000000..b97710f
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/crypto/omap-sham.txt
>> @@ -0,0 +1,31 @@
>> +OMAP SoC SHA crypto Module
>> +
>> +Required properties:
>> +
>> +- compatible : Should contain entries for this and backward compatible
>> +  SHAM versions:
>> +  - "ti,omap2-sham" for OMAP2 & OMAP3.
>> +  - "ti,omap4-sham" for OMAP4 and AM33XX.
>> +  Note that these two versions are incompatible.
>> +- ti,hwmods: Name of the hwmod associated with the SHAM module
>> +- reg : Offset and length of the register set for the module
>> +- interrupt-parent : the phandle for the interrupt controller that
>> +  services interrupts for this module.
> 
> I don't think this is strictly speaking necessary -- it's mostly going
> to be implicit (it is in the dtsi below). As this is a standard
> property, you don't need to document it here.

Ok, dropping from documentation.

>> +- interrupts : the interrupt number for the SHAM module.
> 
> Sorry, I missed this last time, but this should be interrupt-specifier
> rather than interrupt number.

Ok, done.

> 
> Otherwise, this looks good to me. With the fixups above:
> 
> Acked-by: Mark Rutland <mark.rutland@arm.com>

Thanks!

-Joel

> 
>> +
>> +Optional properties:
>> +- dmas: DMA specifier for the rx dma. See the DMA client binding,
>> +	Documentation/devicetree/bindings/dma/dma.txt
>> +- dma-names: DMA request name. Should be "rx" if a dma is present.
>> +
>> +Example:
>> +	/* AM335x */
>> +	sham: sham@53100000 {
>> +		compatible = "ti,omap4-sham";
>> +		ti,hwmods = "sham";
>> +		reg = <0x53100000 0x200>;
>> +		interrupt-parent = <&intc>;
>> +		interrupts = <109>;
>> +		dmas = <&edma 36>;
>> +		dma-names = "rx";
>> +	};
>> diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
>> index 0d63348..8a9802e 100644
>> --- a/arch/arm/boot/dts/am335x-bone.dts
>> +++ b/arch/arm/boot/dts/am335x-bone.dts
>> @@ -19,3 +19,7 @@
>>  &mmc1 {
>>  	vmmc-supply = <&ldo3_reg>;
>>  };
>> +
>> +&sham {
>> +	status = "okay";
>> +};
>> diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
>> index 23b0a3e..d59e51c 100644
>> --- a/arch/arm/boot/dts/am335x-evm.dts
>> +++ b/arch/arm/boot/dts/am335x-evm.dts
>> @@ -522,3 +522,7 @@
>>  	status = "okay";
>>  	vmmc-supply = <&vmmc_reg>;
>>  };
>> +
>> +&sham {
>> +	status = "okay";
>> +};
>> diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
>> index bc93895..d45a330 100644
>> --- a/arch/arm/boot/dts/am335x-evmsk.dts
>> +++ b/arch/arm/boot/dts/am335x-evmsk.dts
>> @@ -424,3 +424,7 @@
>>  	status = "okay";
>>  	vmmc-supply = <&vmmc_reg>;
>>  };
>> +
>> +&sham {
>> +	status = "okay";
>> +};
>> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
>> index 553adc6..299710b 100644
>> --- a/arch/arm/boot/dts/am33xx.dtsi
>> +++ b/arch/arm/boot/dts/am33xx.dtsi
>> @@ -710,5 +710,14 @@
>>  			#size-cells = <1>;
>>  			status = "disabled";
>>  		};
>> +
>> +		sham: sham@53100000 {
>> +			compatible = "ti,omap4-sham";
>> +			ti,hwmods = "sham";
>> +			reg = <0x53100000 0x200>;
>> +			interrupts = <109>;
>> +			dmas = <&edma 36>;
>> +			dma-names = "rx";
>> +		};
>>  	};
>>  };
>> -- 
>> 1.8.1.2
>>
>>


  reply	other threads:[~2013-10-05 18:18 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-09-30 15:12 [PATCH v2 0/9] ARM: dts: DT data for OMAP platforms for v3.13 Joel Fernandes
2013-09-30 15:12 ` Joel Fernandes
2013-09-30 15:12 ` [PATCH v2 1/9] omap4: dts: Add node for AES Joel Fernandes
2013-09-30 15:12   ` Joel Fernandes
2013-09-30 15:12 ` [PATCH v2 2/9] omap4: dts: Add node for DES3DES module Joel Fernandes
2013-09-30 15:12   ` Joel Fernandes
2013-09-30 15:13 ` [PATCH v2 3/9] ARM: dts: Add SHAM data and documentation for AM33XX Joel Fernandes
2013-09-30 15:13   ` Joel Fernandes
2013-10-04 14:26   ` Mark Rutland
2013-10-04 14:26     ` Mark Rutland
2013-10-05 18:18     ` Joel Fernandes [this message]
2013-10-05 18:18       ` Joel Fernandes
2013-10-05 18:18       ` Joel Fernandes
2013-09-30 15:13 ` [PATCH v2 4/9] ARM: dts: Add AES " Joel Fernandes
2013-09-30 15:13   ` Joel Fernandes
     [not found]   ` <1380553986-15910-5-git-send-email-joelf-l0cyMroinI0@public.gmane.org>
2013-10-04 14:33     ` Mark Rutland
2013-10-04 14:33       ` Mark Rutland
2013-10-04 14:33       ` Mark Rutland
2013-10-05 18:29       ` Joel Fernandes
2013-10-05 18:29         ` Joel Fernandes
2013-10-05 18:29         ` Joel Fernandes
2013-09-30 15:13 ` [PATCH v2 5/9] am33xx: dts: Fix AES interrupt number Joel Fernandes
2013-09-30 15:13   ` Joel Fernandes
2013-10-04 14:19   ` Benoit Cousson
2013-10-04 14:19     ` Benoit Cousson
2013-09-30 15:13 ` [PATCH v2 6/9] ARM: am437x: dts: Add AES node for am437x Joel Fernandes
2013-09-30 15:13   ` Joel Fernandes
2013-09-30 15:13 ` [PATCH v2 7/9] ARM: am437x: dts: Add DES " Joel Fernandes
2013-09-30 15:13   ` Joel Fernandes
2013-09-30 15:13 ` [PATCH v2 8/9] ARM: dts: AM33XX: Add LCDC info into am335x-evm Joel Fernandes
2013-09-30 15:13   ` Joel Fernandes
2013-09-30 15:13 ` [PATCH v2 9/9] dts: boneblack: add pinmux and hdmi node to enable display Joel Fernandes
2013-09-30 15:13   ` Joel Fernandes
2013-10-03 13:25 ` [PATCH v2 0/9] ARM: dts: DT data for OMAP platforms for v3.13 Benoit Cousson
2013-10-03 13:25   ` Benoit Cousson
2013-10-04  2:00   ` Joel Fernandes
2013-10-04  2:00     ` Joel Fernandes
2013-10-04 14:10     ` Benoit Cousson
2013-10-04 14:10       ` Benoit Cousson
2013-10-04 14:50       ` Joel Fernandes
2013-10-04 14:50         ` Joel Fernandes

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=525057E0.80009@ti.com \
    --to=joelf@ti.com \
    --cc=Pawel.Moll@arm.com \
    --cc=bcousson@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=mgreer@animalcreek.com \
    --cc=paul@pwsan.com \
    --cc=rob.herring@calxeda.com \
    --cc=rob@landley.net \
    --cc=swarren@wwwdotorg.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.