* [PATCH 0/2] Update dts file to support lm90 well
@ 2013-10-07 9:28 Wei Ni
[not found] ` <1381138109-22727-1-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
0 siblings, 1 reply; 4+ messages in thread
From: Wei Ni @ 2013-10-07 9:28 UTC (permalink / raw)
To: swarren-3lzwWm7+Weoh9ZMKESR00Q, broonie-DgEjT+Ai2ygdnm+yROfE0A
Cc: linux-tegra-u79uwXL29TY76Z2rM5mHXA, Wei Ni
Add nct1008 dt entry on Tegra114 Dalmore.
Add vcc-supply for nct1008 on Tegra30 Cardhu.
Didn't add vcc-supply on Tegra20 Ventana, because on this platform,
the vcc for nct1008 is physically present and enabled.
Wei Ni (2):
ARM: tegra: add DT entry for nct1008 to Dalmore
ARM: tegra: add vcc supply for nct1008 to Cardhu
arch/arm/boot/dts/tegra114-dalmore.dts | 10 +++++++++-
arch/arm/boot/dts/tegra30-cardhu.dtsi | 3 ++-
2 files changed, 11 insertions(+), 2 deletions(-)
--
1.7.9.5
^ permalink raw reply [flat|nested] 4+ messages in thread[parent not found: <1381138109-22727-1-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>]
* [PATCH 1/2] ARM: tegra: add DT entry for nct1008 to Dalmore [not found] ` <1381138109-22727-1-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> @ 2013-10-07 9:28 ` Wei Ni 2013-10-07 9:28 ` [PATCH 2/2] ARM: tegra: add vcc supply for nct1008 to Cardhu Wei Ni 2013-10-07 19:22 ` [PATCH 0/2] Update dts file to support lm90 well Stephen Warren 2 siblings, 0 replies; 4+ messages in thread From: Wei Ni @ 2013-10-07 9:28 UTC (permalink / raw) To: swarren-3lzwWm7+Weoh9ZMKESR00Q, broonie-DgEjT+Ai2ygdnm+yROfE0A Cc: linux-tegra-u79uwXL29TY76Z2rM5mHXA, Wei Ni Enable thermal sensor nct1008 for Tegra114 dalmore. Signed-off-by: Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> --- arch/arm/boot/dts/tegra114-dalmore.dts | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index 871aff5..cb5ec23 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -739,6 +739,14 @@ realtek,ldo1-en-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; }; + + temperature-sensor@4c { + compatible = "onnn,nct1008"; + reg = <0x4c>; + vcc-supply = <&palmas_ldo6_reg>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>; + }; }; i2c@7000d000 { @@ -948,7 +956,7 @@ regulator-max-microvolt = <1800000>; }; - ldo6 { + palmas_ldo6_reg: ldo6 { regulator-name = "vdd-sensor-2v85"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 2/2] ARM: tegra: add vcc supply for nct1008 to Cardhu [not found] ` <1381138109-22727-1-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> 2013-10-07 9:28 ` [PATCH 1/2] ARM: tegra: add DT entry for nct1008 to Dalmore Wei Ni @ 2013-10-07 9:28 ` Wei Ni 2013-10-07 19:22 ` [PATCH 0/2] Update dts file to support lm90 well Stephen Warren 2 siblings, 0 replies; 4+ messages in thread From: Wei Ni @ 2013-10-07 9:28 UTC (permalink / raw) To: swarren-3lzwWm7+Weoh9ZMKESR00Q, broonie-DgEjT+Ai2ygdnm+yROfE0A Cc: linux-tegra-u79uwXL29TY76Z2rM5mHXA, Wei Ni Add vcc-supply property in the nct1008 node, and set it as sys_3v3_reg. change the name of this node to temp-sensor. Signed-off-by: Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> --- arch/arm/boot/dts/tegra30-cardhu.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index e19dbf2..5ea7dfa 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -294,9 +294,10 @@ }; }; - nct1008 { + temperature-sensor@4c { compatible = "onnn,nct1008"; reg = <0x4c>; + vcc-supply = <&sys_3v3_reg>; interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>; }; -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH 0/2] Update dts file to support lm90 well [not found] ` <1381138109-22727-1-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> 2013-10-07 9:28 ` [PATCH 1/2] ARM: tegra: add DT entry for nct1008 to Dalmore Wei Ni 2013-10-07 9:28 ` [PATCH 2/2] ARM: tegra: add vcc supply for nct1008 to Cardhu Wei Ni @ 2013-10-07 19:22 ` Stephen Warren 2 siblings, 0 replies; 4+ messages in thread From: Stephen Warren @ 2013-10-07 19:22 UTC (permalink / raw) To: Wei Ni, broonie-DgEjT+Ai2ygdnm+yROfE0A; +Cc: linux-tegra-u79uwXL29TY76Z2rM5mHXA On 10/07/2013 03:28 AM, Wei Ni wrote: > Add nct1008 dt entry on Tegra114 Dalmore. > Add vcc-supply for nct1008 on Tegra30 Cardhu. > Didn't add vcc-supply on Tegra20 Ventana, because on this platform, > the vcc for nct1008 is physically present and enabled. I have applied the series to Tegra's for-3.13/dt branch. ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-10-07 19:22 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-10-07 9:28 [PATCH 0/2] Update dts file to support lm90 well Wei Ni
[not found] ` <1381138109-22727-1-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-10-07 9:28 ` [PATCH 1/2] ARM: tegra: add DT entry for nct1008 to Dalmore Wei Ni
2013-10-07 9:28 ` [PATCH 2/2] ARM: tegra: add vcc supply for nct1008 to Cardhu Wei Ni
2013-10-07 19:22 ` [PATCH 0/2] Update dts file to support lm90 well Stephen Warren
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.