[ath9k-devel] P2P/AP modes

[ath9k-devel] P2P/AP modes

[Sriram Chadalavada]

Dear mailing group,

   According to 
http://wireless.kernel.org/en/users/Drivers/ath9k_htc#AP.2FP2P_Modes, 
these are to be enabled from kernel 3.0 onwards.

   So, what is the current status? Btw, is the driver now included in 
mainline kernel?

    Also, can someone elaborate on these modes? We have a use case to 
read from a MIPI camera and then transmit video over wifi. Would these 
modes enable the use case?

Thanks,
Sriram
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20131009/a9a364e6/attachment.htm 

[ath9k-devel] P2P/AP modes

[Oleksij Rempel]

Good start for this discussion should be public protocol documentation.
Are there any? I would like to read some thing :)

Am 09.10.2013 12:13, schrieb Sriram Chadalavada:
> Dear mailing group,
> 
>   According to
> http://wireless.kernel.org/en/users/Drivers/ath9k_htc#AP.2FP2P_Modes,
> these are to be enabled from kernel 3.0 onwards.
> 
>   So, what is the current status? Btw, is the driver now included in
> mainline kernel?
> 
>    Also, can someone elaborate on these modes? We have a use case to
> read from a MIPI camera and then transmit video over wifi. Would these
> modes enable the use case?
> 
> Thanks,
> Sriram
> 
> 
> 
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel at lists.ath9k.org
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
> 


-- 
Regards,
Oleksij