* [PATCH v2] powerpc/pci: use pci_is_pcie() to simplify code
@ 2013-10-11 6:26 Yijing Wang
2013-10-11 6:48 ` Yijing Wang
0 siblings, 1 reply; 2+ messages in thread
From: Yijing Wang @ 2013-10-11 6:26 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Bjorn Helgaas
Cc: linux-pci, Yijing Wang, Hanjun Guo, Gavin Shan, Paul Mackerras
Use pci_is_pcie() to simplify code.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Reviewed-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Cc: Gavin Shan <shangw@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
---
v1->v2: use dev->pcie_cap instead of "cap" in eeh_ops->read_config()
"cap" is stale after remove PCIe Cap find code.
Point out by Benjamin Herrenschmidt.
---
arch/powerpc/kernel/eeh.c | 5 ++---
arch/powerpc/sysdev/fsl_pci.c | 2 +-
2 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 55593ee..db86f97 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -189,14 +189,13 @@ static size_t eeh_gather_pci_data(struct eeh_dev *edev, char * buf, size_t len)
}
/* If PCI-E capable, dump PCI-E cap 10, and the AER */
- cap = pci_find_capability(dev, PCI_CAP_ID_EXP);
- if (cap) {
+ if (pci_is_pcie(dev)) {
n += scnprintf(buf+n, len-n, "pci-e cap10:\n");
printk(KERN_WARNING
"EEH: PCI-E capabilities and status follow:\n");
for (i=0; i<=8; i++) {
- eeh_ops->read_config(dn, cap+4*i, 4, &cfg);
+ eeh_ops->read_config(dn, dev->pcie_cap+4*i, 4, &cfg);
n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg);
printk(KERN_WARNING "EEH: PCI-E %02x: %08x\n", i, cfg);
}
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index ccfb50d..92e7258 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -45,7 +45,7 @@ static void quirk_fsl_pcie_header(struct pci_dev *dev)
u8 hdr_type;
/* if we aren't a PCIe don't bother */
- if (!pci_find_capability(dev, PCI_CAP_ID_EXP))
+ if (!pci_is_pcie(dev))
return;
/* if we aren't in host mode don't bother */
--
1.7.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v2] powerpc/pci: use pci_is_pcie() to simplify code
2013-10-11 6:26 [PATCH v2] powerpc/pci: use pci_is_pcie() to simplify code Yijing Wang
@ 2013-10-11 6:48 ` Yijing Wang
0 siblings, 0 replies; 2+ messages in thread
From: Yijing Wang @ 2013-10-11 6:48 UTC (permalink / raw)
To: Yijing Wang
Cc: Benjamin Herrenschmidt, Bjorn Helgaas, linux-pci, Hanjun Guo,
Gavin Shan, Paul Mackerras
Sorry, this patch should v3 not v2, please ignore, and v3 patch will resend.
Thanks!
On 2013/10/11 14:26, Yijing Wang wrote:
> Use pci_is_pcie() to simplify code.
>
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> Acked-by: Kumar Gala <galak@kernel.crashing.org>
> Reviewed-by: Gavin Shan <shangw@linux.vnet.ibm.com>
> Cc: Gavin Shan <shangw@linux.vnet.ibm.com>
> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> Cc: Paul Mackerras <paulus@samba.org>
>
> ---
>
> v1->v2: use dev->pcie_cap instead of "cap" in eeh_ops->read_config()
> "cap" is stale after remove PCIe Cap find code.
> Point out by Benjamin Herrenschmidt.
>
> ---
> arch/powerpc/kernel/eeh.c | 5 ++---
> arch/powerpc/sysdev/fsl_pci.c | 2 +-
> 2 files changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
> index 55593ee..db86f97 100644
> --- a/arch/powerpc/kernel/eeh.c
> +++ b/arch/powerpc/kernel/eeh.c
> @@ -189,14 +189,13 @@ static size_t eeh_gather_pci_data(struct eeh_dev *edev, char * buf, size_t len)
> }
>
> /* If PCI-E capable, dump PCI-E cap 10, and the AER */
> - cap = pci_find_capability(dev, PCI_CAP_ID_EXP);
> - if (cap) {
> + if (pci_is_pcie(dev)) {
> n += scnprintf(buf+n, len-n, "pci-e cap10:\n");
> printk(KERN_WARNING
> "EEH: PCI-E capabilities and status follow:\n");
>
> for (i=0; i<=8; i++) {
> - eeh_ops->read_config(dn, cap+4*i, 4, &cfg);
> + eeh_ops->read_config(dn, dev->pcie_cap+4*i, 4, &cfg);
> n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg);
> printk(KERN_WARNING "EEH: PCI-E %02x: %08x\n", i, cfg);
> }
> diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
> index ccfb50d..92e7258 100644
> --- a/arch/powerpc/sysdev/fsl_pci.c
> +++ b/arch/powerpc/sysdev/fsl_pci.c
> @@ -45,7 +45,7 @@ static void quirk_fsl_pcie_header(struct pci_dev *dev)
> u8 hdr_type;
>
> /* if we aren't a PCIe don't bother */
> - if (!pci_find_capability(dev, PCI_CAP_ID_EXP))
> + if (!pci_is_pcie(dev))
> return;
>
> /* if we aren't in host mode don't bother */
>
--
Thanks!
Yijing
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-10-11 6:48 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-10-11 6:26 [PATCH v2] powerpc/pci: use pci_is_pcie() to simplify code Yijing Wang
2013-10-11 6:48 ` Yijing Wang
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.