All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v6 0/2] iio: cm36651: Add CM36651 proximity/light sensor
@ 2013-10-14 12:40 ` Beomho Seo
  0 siblings, 0 replies; 2+ messages in thread
From: Beomho Seo @ 2013-10-14 12:40 UTC (permalink / raw)
  To: linux-iio@vger.kernel.org
  Cc: devicetree@vger.kernel.org, jic23, rob.herring@calxeda.com,
	pawel.moll, Mark Rutland, ian.campbell@citrix.com,
	Sylwester Nawrocki, Jacek Anaszewski, myungjoo.ham, Jaehoon Chung,
	Peter Meerwald l

Hello all,

Thank you for your advices. I have revised v5 revision.
This patch is the sixth revision for Capella CM36651 proximity and RGB light sensor driver.
It also support detection proximity event.

This driver supports:
	- Event: rising and falling proximity events.
	- Reading channel through read_raw_callback.
	- Writing sensor data integration time each channel through write_raw callback.

v6 changed below
	- Remove enable/disable_irq APIs.
	- Add some macros.
	- Code cleanup


*** BLURB HERE ***

Beomho Seo (2):
  DT: Add documentation for cm36651 proximity/light sensor
  iio: cm36651: Add CM36651 proximity/light sensor

 .../devicetree/bindings/iio/light/cm36651.txt      |   26 +
 .../devicetree/bindings/vendor-prefixes.txt        |    1 +
 drivers/iio/light/Kconfig                          |   11 +
 drivers/iio/light/cm36651.c                        |  722 ++++++++++++++++++++
 4 files changed, 760 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/light/cm36651.txt
 create mode 100644 drivers/iio/light/cm36651.c

-- 
1.7.9.5

-- 
Best Regards,

Beomho Seo, Assistant Engineer
System S/W Lab., S/W Platform Team, Software Center
Samsung Electronics

^ permalink raw reply	[flat|nested] 2+ messages in thread
* [PATCH v6 0/2] iio: cm36651: Add CM36651 proximity/light sensor
@ 2013-10-14 12:40 ` Beomho Seo
  0 siblings, 0 replies; 2+ messages in thread
From: Beomho Seo @ 2013-10-14 12:40 UTC (permalink / raw)
  To: linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
  Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	jic23-DgEjT+Ai2ygdnm+yROfE0A,
	rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org,
	pawel.moll-5wv7dgnIgG8, Mark Rutland,
	ian.campbell-Sxgqhf6Nn4DQT0dZR+AlfA@public.gmane.org,
	Sylwester Nawrocki, Jacek Anaszewski,
	myungjoo.ham-Sze3O3UU22JBDgjK7y7TUQ, Jaehoon Chung,
	Peter Meerwald l

Hello all,

Thank you for your advices. I have revised v5 revision.
This patch is the sixth revision for Capella CM36651 proximity and RGB light sensor driver.
It also support detection proximity event.

This driver supports:
	- Event: rising and falling proximity events.
	- Reading channel through read_raw_callback.
	- Writing sensor data integration time each channel through write_raw callback.

v6 changed below
	- Remove enable/disable_irq APIs.
	- Add some macros.
	- Code cleanup


*** BLURB HERE ***

Beomho Seo (2):
  DT: Add documentation for cm36651 proximity/light sensor
  iio: cm36651: Add CM36651 proximity/light sensor

 .../devicetree/bindings/iio/light/cm36651.txt      |   26 +
 .../devicetree/bindings/vendor-prefixes.txt        |    1 +
 drivers/iio/light/Kconfig                          |   11 +
 drivers/iio/light/cm36651.c                        |  722 ++++++++++++++++++++
 4 files changed, 760 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/light/cm36651.txt
 create mode 100644 drivers/iio/light/cm36651.c

-- 
1.7.9.5

-- 
Best Regards,

Beomho Seo, Assistant Engineer
System S/W Lab., S/W Platform Team, Software Center
Samsung Electronics

^ permalink raw reply	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-10-14 12:40 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-10-14 12:40 [PATCH v6 0/2] iio: cm36651: Add CM36651 proximity/light sensor Beomho Seo
2013-10-14 12:40 ` Beomho Seo

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.