From: Beomho Seo <beomho.seo@samsung.com>
To: "linux-iio@vger.kernel.org" <linux-iio@vger.kernel.org>
Cc: "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
jic23@kernel.org, Mark Rutland <mark.rutland@arm.com>,
myungjoo.ham@samsung.com, Jaehoon Chung <jh80.chung@samsung.com>,
Peter Meerwald l <pmeerw@pmeerw.net>
Subject: [PATCH v7 2/2] DT: Add documentation for cm36651 proximity/light sensor
Date: Thu, 17 Oct 2013 11:22:49 +0900 [thread overview]
Message-ID: <525F49F9.3030203@samsung.com> (raw)
This patch adds device tree binding documentation for CM36651 proximity/light sensor.
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
---
.../devicetree/bindings/iio/light/cm36651.txt | 26 ++++++++++++++++++++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
2 files changed, 27 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/light/cm36651.txt
diff --git a/Documentation/devicetree/bindings/iio/light/cm36651.txt b/Documentation/devicetree/bindings/iio/light/cm36651.txt
new file mode 100644
index 0000000..c03e19d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/cm36651.txt
@@ -0,0 +1,26 @@
+* Capella CM36651 I2C Proximity and Color Light sensor
+
+Required properties:
+- compatible: must be "capella,cm36651"
+- reg: the I2C address of the device
+- interrupts: interrupt-specifier for the sole interrupt
+ generated by the device
+- vled-supply: regulator for the IR LED. IR_LED is a part
+ of the cm36651 for proximity detection.
+ As covered in ../../regulator/regulator.txt
+
+Example:
+
+ i2c_cm36651: i2c-gpio {
+ /* ... */
+
+ cm36651@18 {
+ compatible = "capella,cm36651";
+ reg = <0x18>;
+ interrupt-parent = <&gpx0>;
+ interrupts = <2 0>;
+ vled-supply = <&ps_als_reg>;
+ };
+
+ /* ... */
+ };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 2956800..04eab45 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -15,6 +15,7 @@ atmel Atmel Corporation
avago Avago Technologies
bosch Bosch Sensortec GmbH
brcm Broadcom Corporation
+capella Capella Microsystems, Inc
cavium Cavium, Inc.
chrp Common Hardware Reference Platform
cirrus Cirrus Logic, Inc.
--
1.7.9.5
--
Best Regards,
Beomho Seo, Assistant Engineer
System S/W Lab., S/W Platform Team, Software Center
Samsung Electronics
WARNING: multiple messages have this Message-ID (diff)
From: Beomho Seo <beomho.seo-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
To: "linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Cc: "devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
myungjoo.ham-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org,
Jaehoon Chung
<jh80.chung-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
Peter Meerwald l <pmeerw-jW+XmwGofnusTnJN9+BGXg@public.gmane.org>
Subject: [PATCH v7 2/2] DT: Add documentation for cm36651 proximity/light sensor
Date: Thu, 17 Oct 2013 11:22:49 +0900 [thread overview]
Message-ID: <525F49F9.3030203@samsung.com> (raw)
This patch adds device tree binding documentation for CM36651 proximity/light sensor.
Signed-off-by: Beomho Seo <beomho.seo-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
---
.../devicetree/bindings/iio/light/cm36651.txt | 26 ++++++++++++++++++++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
2 files changed, 27 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/light/cm36651.txt
diff --git a/Documentation/devicetree/bindings/iio/light/cm36651.txt b/Documentation/devicetree/bindings/iio/light/cm36651.txt
new file mode 100644
index 0000000..c03e19d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/cm36651.txt
@@ -0,0 +1,26 @@
+* Capella CM36651 I2C Proximity and Color Light sensor
+
+Required properties:
+- compatible: must be "capella,cm36651"
+- reg: the I2C address of the device
+- interrupts: interrupt-specifier for the sole interrupt
+ generated by the device
+- vled-supply: regulator for the IR LED. IR_LED is a part
+ of the cm36651 for proximity detection.
+ As covered in ../../regulator/regulator.txt
+
+Example:
+
+ i2c_cm36651: i2c-gpio {
+ /* ... */
+
+ cm36651@18 {
+ compatible = "capella,cm36651";
+ reg = <0x18>;
+ interrupt-parent = <&gpx0>;
+ interrupts = <2 0>;
+ vled-supply = <&ps_als_reg>;
+ };
+
+ /* ... */
+ };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 2956800..04eab45 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -15,6 +15,7 @@ atmel Atmel Corporation
avago Avago Technologies
bosch Bosch Sensortec GmbH
brcm Broadcom Corporation
+capella Capella Microsystems, Inc
cavium Cavium, Inc.
chrp Common Hardware Reference Platform
cirrus Cirrus Logic, Inc.
--
1.7.9.5
--
Best Regards,
Beomho Seo, Assistant Engineer
System S/W Lab., S/W Platform Team, Software Center
Samsung Electronics
next reply other threads:[~2013-10-17 2:22 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-17 2:22 Beomho Seo [this message]
2013-10-17 2:22 ` [PATCH v7 2/2] DT: Add documentation for cm36651 proximity/light sensor Beomho Seo
2013-10-17 22:43 ` Jonathan Cameron
2013-10-17 22:43 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=525F49F9.3030203@samsung.com \
--to=beomho.seo@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=jh80.chung@samsung.com \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=myungjoo.ham@samsung.com \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.