* [PATCH] ARM: dts: omap3-beagle: Adapt USB OTG to generic PHY framework
@ 2013-10-07 10:46 ` Roger Quadros
0 siblings, 0 replies; 12+ messages in thread
From: Roger Quadros @ 2013-10-07 10:46 UTC (permalink / raw)
To: bcousson-rdvid1DuHRBWk0Htik3J/w
Cc: balbi-l0cyMroinI0, tony-4v6yS6AI5VpBDgjK7y7TUQ,
kishon-l0cyMroinI0, bigeasy-hfZtesqFncYOwBW4kG4KsQ,
linux-usb-u79uwXL29TY76Z2rM5mHXA,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Roger Quadros
The generic PHY framewrok expects different properties than the
old USB PHY framework. Supply those properties.
Fixes USB OTG port on beagle after the Generic PHY framework was
merged in greg/usb-next. [1]
[1] - https://lkml.org/lkml/2013/9/27/581
Signed-off-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
---
arch/arm/boot/dts/omap3-beagle.dts | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 7669c16..fa532aa 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -173,6 +173,8 @@
&usb_otg_hs {
interface-type = <0>;
usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
mode = <3>;
power = <50>;
};
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH] ARM: dts: omap3-beagle: Adapt USB OTG to generic PHY framework
@ 2013-10-07 10:46 ` Roger Quadros
0 siblings, 0 replies; 12+ messages in thread
From: Roger Quadros @ 2013-10-07 10:46 UTC (permalink / raw)
To: linux-arm-kernel
The generic PHY framewrok expects different properties than the
old USB PHY framework. Supply those properties.
Fixes USB OTG port on beagle after the Generic PHY framework was
merged in greg/usb-next. [1]
[1] - https://lkml.org/lkml/2013/9/27/581
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm/boot/dts/omap3-beagle.dts | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 7669c16..fa532aa 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -173,6 +173,8 @@
&usb_otg_hs {
interface-type = <0>;
usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
mode = <3>;
power = <50>;
};
--
1.7.4.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH] ARM: dts: omap3-beagle: Adapt USB OTG to generic PHY framework
@ 2013-10-07 10:46 ` Roger Quadros
0 siblings, 0 replies; 12+ messages in thread
From: Roger Quadros @ 2013-10-07 10:46 UTC (permalink / raw)
To: bcousson
Cc: balbi, tony, kishon, bigeasy, linux-usb, linux-omap,
linux-arm-kernel, devicetree, linux-kernel, Roger Quadros
The generic PHY framewrok expects different properties than the
old USB PHY framework. Supply those properties.
Fixes USB OTG port on beagle after the Generic PHY framework was
merged in greg/usb-next. [1]
[1] - https://lkml.org/lkml/2013/9/27/581
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm/boot/dts/omap3-beagle.dts | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 7669c16..fa532aa 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -173,6 +173,8 @@
&usb_otg_hs {
interface-type = <0>;
usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
mode = <3>;
power = <50>;
};
--
1.7.4.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH] ARM: dts: omap3-beagle: Adapt USB OTG to generic PHY framework
2013-10-07 10:46 ` Roger Quadros
(?)
@ 2013-10-10 15:33 ` Felipe Balbi
-1 siblings, 0 replies; 12+ messages in thread
From: Felipe Balbi @ 2013-10-10 15:33 UTC (permalink / raw)
To: Roger Quadros
Cc: devicetree, tony, bigeasy, linux-usb, linux-kernel, balbi, kishon,
bcousson, linux-omap, linux-arm-kernel
[-- Attachment #1.1: Type: text/plain, Size: 442 bytes --]
On Mon, Oct 07, 2013 at 01:46:50PM +0300, Roger Quadros wrote:
> The generic PHY framewrok expects different properties than the
> old USB PHY framework. Supply those properties.
>
> Fixes USB OTG port on beagle after the Generic PHY framework was
> merged in greg/usb-next. [1]
>
> [1] - https://lkml.org/lkml/2013/9/27/581
>
> Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
--
balbi
[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH] ARM: dts: omap3-beagle: Adapt USB OTG to generic PHY framework
@ 2013-10-10 15:33 ` Felipe Balbi
0 siblings, 0 replies; 12+ messages in thread
From: Felipe Balbi @ 2013-10-10 15:33 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Oct 07, 2013 at 01:46:50PM +0300, Roger Quadros wrote:
> The generic PHY framewrok expects different properties than the
> old USB PHY framework. Supply those properties.
>
> Fixes USB OTG port on beagle after the Generic PHY framework was
> merged in greg/usb-next. [1]
>
> [1] - https://lkml.org/lkml/2013/9/27/581
>
> Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
--
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131010/4f4eb2e6/attachment.sig>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] ARM: dts: omap3-beagle: Adapt USB OTG to generic PHY framework
@ 2013-10-10 15:33 ` Felipe Balbi
0 siblings, 0 replies; 12+ messages in thread
From: Felipe Balbi @ 2013-10-10 15:33 UTC (permalink / raw)
To: Roger Quadros
Cc: bcousson, balbi, tony, kishon, bigeasy, linux-usb, linux-omap,
linux-arm-kernel, devicetree, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 442 bytes --]
On Mon, Oct 07, 2013 at 01:46:50PM +0300, Roger Quadros wrote:
> The generic PHY framewrok expects different properties than the
> old USB PHY framework. Supply those properties.
>
> Fixes USB OTG port on beagle after the Generic PHY framework was
> merged in greg/usb-next. [1]
>
> [1] - https://lkml.org/lkml/2013/9/27/581
>
> Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
--
balbi
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] ARM: dts: omap3-beagle: Adapt USB OTG to generic PHY framework
2013-10-07 10:46 ` Roger Quadros
(?)
@ 2013-10-18 12:00 ` Roger Quadros
-1 siblings, 0 replies; 12+ messages in thread
From: Roger Quadros @ 2013-10-18 12:00 UTC (permalink / raw)
To: bcousson-rdvid1DuHRBWk0Htik3J/w
Cc: Roger Quadros, balbi-l0cyMroinI0, tony-4v6yS6AI5VpBDgjK7y7TUQ,
kishon-l0cyMroinI0, bigeasy-hfZtesqFncYOwBW4kG4KsQ,
linux-usb-u79uwXL29TY76Z2rM5mHXA,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Stefan Roese
Hi Benoit,
Could you please include this one for 3.13?
Without this OTG port will be broken for beagle. Thanks.
cheers,
-roger
On 10/07/2013 01:46 PM, Roger Quadros wrote:
> The generic PHY framewrok expects different properties than the
> old USB PHY framework. Supply those properties.
>
> Fixes USB OTG port on beagle after the Generic PHY framework was
> merged in greg/usb-next. [1]
>
> [1] - https://lkml.org/lkml/2013/9/27/581
>
> Signed-off-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
> ---
> arch/arm/boot/dts/omap3-beagle.dts | 2 ++
> 1 files changed, 2 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
> index 7669c16..fa532aa 100644
> --- a/arch/arm/boot/dts/omap3-beagle.dts
> +++ b/arch/arm/boot/dts/omap3-beagle.dts
> @@ -173,6 +173,8 @@
> &usb_otg_hs {
> interface-type = <0>;
> usb-phy = <&usb2_phy>;
> + phys = <&usb2_phy>;
> + phy-names = "usb2-phy";
> mode = <3>;
> power = <50>;
> };
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH] ARM: dts: omap3-beagle: Adapt USB OTG to generic PHY framework
@ 2013-10-18 12:00 ` Roger Quadros
0 siblings, 0 replies; 12+ messages in thread
From: Roger Quadros @ 2013-10-18 12:00 UTC (permalink / raw)
To: linux-arm-kernel
Hi Benoit,
Could you please include this one for 3.13?
Without this OTG port will be broken for beagle. Thanks.
cheers,
-roger
On 10/07/2013 01:46 PM, Roger Quadros wrote:
> The generic PHY framewrok expects different properties than the
> old USB PHY framework. Supply those properties.
>
> Fixes USB OTG port on beagle after the Generic PHY framework was
> merged in greg/usb-next. [1]
>
> [1] - https://lkml.org/lkml/2013/9/27/581
>
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> ---
> arch/arm/boot/dts/omap3-beagle.dts | 2 ++
> 1 files changed, 2 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
> index 7669c16..fa532aa 100644
> --- a/arch/arm/boot/dts/omap3-beagle.dts
> +++ b/arch/arm/boot/dts/omap3-beagle.dts
> @@ -173,6 +173,8 @@
> &usb_otg_hs {
> interface-type = <0>;
> usb-phy = <&usb2_phy>;
> + phys = <&usb2_phy>;
> + phy-names = "usb2-phy";
> mode = <3>;
> power = <50>;
> };
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] ARM: dts: omap3-beagle: Adapt USB OTG to generic PHY framework
@ 2013-10-18 12:00 ` Roger Quadros
0 siblings, 0 replies; 12+ messages in thread
From: Roger Quadros @ 2013-10-18 12:00 UTC (permalink / raw)
To: bcousson
Cc: Roger Quadros, balbi, tony, kishon, bigeasy, linux-usb,
linux-omap, linux-arm-kernel, devicetree, linux-kernel,
Stefan Roese
Hi Benoit,
Could you please include this one for 3.13?
Without this OTG port will be broken for beagle. Thanks.
cheers,
-roger
On 10/07/2013 01:46 PM, Roger Quadros wrote:
> The generic PHY framewrok expects different properties than the
> old USB PHY framework. Supply those properties.
>
> Fixes USB OTG port on beagle after the Generic PHY framework was
> merged in greg/usb-next. [1]
>
> [1] - https://lkml.org/lkml/2013/9/27/581
>
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> ---
> arch/arm/boot/dts/omap3-beagle.dts | 2 ++
> 1 files changed, 2 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
> index 7669c16..fa532aa 100644
> --- a/arch/arm/boot/dts/omap3-beagle.dts
> +++ b/arch/arm/boot/dts/omap3-beagle.dts
> @@ -173,6 +173,8 @@
> &usb_otg_hs {
> interface-type = <0>;
> usb-phy = <&usb2_phy>;
> + phys = <&usb2_phy>;
> + phy-names = "usb2-phy";
> mode = <3>;
> power = <50>;
> };
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] ARM: dts: omap3-beagle: Adapt USB OTG to generic PHY framework
2013-10-18 12:00 ` Roger Quadros
(?)
@ 2013-10-18 15:59 ` Benoit Cousson
-1 siblings, 0 replies; 12+ messages in thread
From: Benoit Cousson @ 2013-10-18 15:59 UTC (permalink / raw)
To: Roger Quadros
Cc: balbi-l0cyMroinI0, tony-4v6yS6AI5VpBDgjK7y7TUQ,
kishon-l0cyMroinI0, bigeasy-hfZtesqFncYOwBW4kG4KsQ,
linux-usb-u79uwXL29TY76Z2rM5mHXA,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Stefan Roese
Hi Roger,
On 18/10/2013 14:00, Roger Quadros wrote:
> Hi Benoit,
>
> Could you please include this one for 3.13?
> Without this OTG port will be broken for beagle. Thanks.
>
I've just applied it.
Thanks,
Benoit
> cheers,
> -roger
>
> On 10/07/2013 01:46 PM, Roger Quadros wrote:
>> The generic PHY framewrok expects different properties than the
>> old USB PHY framework. Supply those properties.
>>
>> Fixes USB OTG port on beagle after the Generic PHY framework was
>> merged in greg/usb-next. [1]
>>
>> [1] - https://lkml.org/lkml/2013/9/27/581
>>
>> Signed-off-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
>> ---
>> arch/arm/boot/dts/omap3-beagle.dts | 2 ++
>> 1 files changed, 2 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
>> index 7669c16..fa532aa 100644
>> --- a/arch/arm/boot/dts/omap3-beagle.dts
>> +++ b/arch/arm/boot/dts/omap3-beagle.dts
>> @@ -173,6 +173,8 @@
>> &usb_otg_hs {
>> interface-type = <0>;
>> usb-phy = <&usb2_phy>;
>> + phys = <&usb2_phy>;
>> + phy-names = "usb2-phy";
>> mode = <3>;
>> power = <50>;
>> };
>>
>
--
Benoît Cousson
BayLibre
Embedded Linux Technology Lab
www.baylibre.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH] ARM: dts: omap3-beagle: Adapt USB OTG to generic PHY framework
@ 2013-10-18 15:59 ` Benoit Cousson
0 siblings, 0 replies; 12+ messages in thread
From: Benoit Cousson @ 2013-10-18 15:59 UTC (permalink / raw)
To: linux-arm-kernel
Hi Roger,
On 18/10/2013 14:00, Roger Quadros wrote:
> Hi Benoit,
>
> Could you please include this one for 3.13?
> Without this OTG port will be broken for beagle. Thanks.
>
I've just applied it.
Thanks,
Benoit
> cheers,
> -roger
>
> On 10/07/2013 01:46 PM, Roger Quadros wrote:
>> The generic PHY framewrok expects different properties than the
>> old USB PHY framework. Supply those properties.
>>
>> Fixes USB OTG port on beagle after the Generic PHY framework was
>> merged in greg/usb-next. [1]
>>
>> [1] - https://lkml.org/lkml/2013/9/27/581
>>
>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>> ---
>> arch/arm/boot/dts/omap3-beagle.dts | 2 ++
>> 1 files changed, 2 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
>> index 7669c16..fa532aa 100644
>> --- a/arch/arm/boot/dts/omap3-beagle.dts
>> +++ b/arch/arm/boot/dts/omap3-beagle.dts
>> @@ -173,6 +173,8 @@
>> &usb_otg_hs {
>> interface-type = <0>;
>> usb-phy = <&usb2_phy>;
>> + phys = <&usb2_phy>;
>> + phy-names = "usb2-phy";
>> mode = <3>;
>> power = <50>;
>> };
>>
>
--
Beno?t Cousson
BayLibre
Embedded Linux Technology Lab
www.baylibre.com
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] ARM: dts: omap3-beagle: Adapt USB OTG to generic PHY framework
@ 2013-10-18 15:59 ` Benoit Cousson
0 siblings, 0 replies; 12+ messages in thread
From: Benoit Cousson @ 2013-10-18 15:59 UTC (permalink / raw)
To: Roger Quadros
Cc: balbi, tony, kishon, bigeasy, linux-usb, linux-omap,
linux-arm-kernel, devicetree, linux-kernel, Stefan Roese
Hi Roger,
On 18/10/2013 14:00, Roger Quadros wrote:
> Hi Benoit,
>
> Could you please include this one for 3.13?
> Without this OTG port will be broken for beagle. Thanks.
>
I've just applied it.
Thanks,
Benoit
> cheers,
> -roger
>
> On 10/07/2013 01:46 PM, Roger Quadros wrote:
>> The generic PHY framewrok expects different properties than the
>> old USB PHY framework. Supply those properties.
>>
>> Fixes USB OTG port on beagle after the Generic PHY framework was
>> merged in greg/usb-next. [1]
>>
>> [1] - https://lkml.org/lkml/2013/9/27/581
>>
>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>> ---
>> arch/arm/boot/dts/omap3-beagle.dts | 2 ++
>> 1 files changed, 2 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
>> index 7669c16..fa532aa 100644
>> --- a/arch/arm/boot/dts/omap3-beagle.dts
>> +++ b/arch/arm/boot/dts/omap3-beagle.dts
>> @@ -173,6 +173,8 @@
>> &usb_otg_hs {
>> interface-type = <0>;
>> usb-phy = <&usb2_phy>;
>> + phys = <&usb2_phy>;
>> + phy-names = "usb2-phy";
>> mode = <3>;
>> power = <50>;
>> };
>>
>
--
Benoît Cousson
BayLibre
Embedded Linux Technology Lab
www.baylibre.com
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2013-10-18 16:00 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-10-07 10:46 [PATCH] ARM: dts: omap3-beagle: Adapt USB OTG to generic PHY framework Roger Quadros
2013-10-07 10:46 ` Roger Quadros
2013-10-07 10:46 ` Roger Quadros
2013-10-10 15:33 ` Felipe Balbi
2013-10-10 15:33 ` Felipe Balbi
2013-10-10 15:33 ` Felipe Balbi
[not found] ` <1381142810-14541-1-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2013-10-18 12:00 ` Roger Quadros
2013-10-18 12:00 ` Roger Quadros
2013-10-18 12:00 ` Roger Quadros
[not found] ` <526122C4.4090702-l0cyMroinI0@public.gmane.org>
2013-10-18 15:59 ` Benoit Cousson
2013-10-18 15:59 ` Benoit Cousson
2013-10-18 15:59 ` Benoit Cousson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.