* [PATCH v2 1/2] arc_emac: fix probe error path @ 2014-04-25 8:03 Heiko Stübner 2014-04-25 8:06 ` Heiko Stübner 2014-04-27 23:54 ` [PATCH v2 1/2] arc_emac: fix probe error path David Miller 0 siblings, 2 replies; 5+ messages in thread From: Heiko Stübner @ 2014-04-25 8:03 UTC (permalink / raw) To: David S. Miller; +Cc: Alexey Brodkin, netdev, Max Schwarz, linux-kernel The probe function at the moment only frees the netdev but does not disconnect the phy or removes the mdio bus it registered. Signed-off-by: Heiko Stuebner <heiko@sntech.de> --- changes since v1: - fix duplicate netif_api_del found by Max Schwarz drivers/net/ethernet/arc/emac_main.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c index 9f45782..9747dda 100644 --- a/drivers/net/ethernet/arc/emac_main.c +++ b/drivers/net/ethernet/arc/emac_main.c @@ -683,7 +683,7 @@ static int arc_emac_probe(struct platform_device *pdev) priv->regs = devm_ioremap_resource(&pdev->dev, &res_regs); if (IS_ERR(priv->regs)) { err = PTR_ERR(priv->regs); - goto out; + goto out_netdev; } dev_dbg(&pdev->dev, "Registers base address is 0x%p\n", priv->regs); @@ -693,7 +693,7 @@ static int arc_emac_probe(struct platform_device *pdev) if (!(id == 0x0005fd02 || id == 0x0007fd02)) { dev_err(&pdev->dev, "ARC EMAC not detected, id=0x%x\n", id); err = -ENODEV; - goto out; + goto out_netdev; } dev_info(&pdev->dev, "ARC EMAC detected with id: 0x%x\n", id); @@ -708,7 +708,7 @@ static int arc_emac_probe(struct platform_device *pdev) ndev->name, ndev); if (err) { dev_err(&pdev->dev, "could not allocate IRQ\n"); - goto out; + goto out_netdev; } /* Get MAC address from device tree */ @@ -729,7 +729,7 @@ static int arc_emac_probe(struct platform_device *pdev) if (!priv->rxbd) { dev_err(&pdev->dev, "failed to allocate data buffers\n"); err = -ENOMEM; - goto out; + goto out_netdev; } priv->txbd = priv->rxbd + RX_BD_NUM; @@ -741,7 +741,7 @@ static int arc_emac_probe(struct platform_device *pdev) err = arc_mdio_probe(pdev, priv); if (err) { dev_err(&pdev->dev, "failed to probe MII bus\n"); - goto out; + goto out_netdev; } priv->phy_dev = of_phy_connect(ndev, phy_node, arc_emac_adjust_link, 0, @@ -749,7 +749,7 @@ static int arc_emac_probe(struct platform_device *pdev) if (!priv->phy_dev) { dev_err(&pdev->dev, "of_phy_connect() failed\n"); err = -ENODEV; - goto out; + goto out_mdio; } dev_info(&pdev->dev, "connected to %s phy with id 0x%x\n", @@ -759,14 +759,19 @@ static int arc_emac_probe(struct platform_device *pdev) err = register_netdev(ndev); if (err) { - netif_napi_del(&priv->napi); dev_err(&pdev->dev, "failed to register network device\n"); - goto out; + goto out_netif_api; } return 0; -out: +out_netif_api: + netif_napi_del(&priv->napi); + phy_disconnect(priv->phy_dev); + priv->phy_dev = NULL; +out_mdio: + arc_mdio_remove(priv); +out_netdev: free_netdev(ndev); return err; } -- 1.9.0 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v2 2/2] arc_emac: add clock handling 2014-04-25 8:03 [PATCH v2 1/2] arc_emac: fix probe error path Heiko Stübner @ 2014-04-25 8:06 ` Heiko Stübner 2014-04-27 23:54 ` [PATCH v2 1/2] arc_emac: fix probe error path David Miller 1 sibling, 0 replies; 5+ messages in thread From: Heiko Stübner @ 2014-04-25 8:06 UTC (permalink / raw) To: David S. Miller Cc: Alexey Brodkin, netdev-u79uwXL29TY76Z2rM5mHXA, Max Schwarz, linux-kernel-u79uwXL29TY76Z2rM5mHXA, devicetree-u79uwXL29TY76Z2rM5mHXA, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala This adds ability for the arc_emac to really handle its supplying clock. To get the needed clock-frequency either a real clock or the previous clock-frequency property must be provided. Signed-off-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org> Tested-by: Max Schwarz <max.schwarz-BGeptl67XyCzQB+pC5nmwQ@public.gmane.org> --- changes since v1: - fix wrong clk error check found by Max Schwarz Documentation/devicetree/bindings/net/arc_emac.txt | 12 +++++- drivers/net/ethernet/arc/emac.h | 2 + drivers/net/ethernet/arc/emac_main.c | 46 ++++++++++++++++------ 3 files changed, 47 insertions(+), 13 deletions(-) diff --git a/Documentation/devicetree/bindings/net/arc_emac.txt b/Documentation/devicetree/bindings/net/arc_emac.txt index 7fbb027..a1d71eb 100644 --- a/Documentation/devicetree/bindings/net/arc_emac.txt +++ b/Documentation/devicetree/bindings/net/arc_emac.txt @@ -4,11 +4,15 @@ Required properties: - compatible: Should be "snps,arc-emac" - reg: Address and length of the register set for the device - interrupts: Should contain the EMAC interrupts -- clock-frequency: CPU frequency. It is needed to calculate and set polling -period of EMAC. - max-speed: see ethernet.txt file in the same directory. - phy: see ethernet.txt file in the same directory. +Clock handling: +The clock frequency is needed to calculate and set polling period of EMAC. +It must be provided by one of: +- clock-frequency: CPU frequency. +- clocks: reference to the clock supplying the EMAC. + Child nodes of the driver are the individual PHY devices connected to the MDIO bus. They must have a "reg" property given the PHY address on the MDIO bus. @@ -19,7 +23,11 @@ Examples: reg = <0xc0fc2000 0x3c>; interrupts = <6>; mac-address = [ 00 11 22 33 44 55 ]; + clock-frequency = <80000000>; + /* or */ + clocks = <&emac_clock>; + max-speed = <100>; phy = <&phy0>; diff --git a/drivers/net/ethernet/arc/emac.h b/drivers/net/ethernet/arc/emac.h index 928fac6..53f85bf 100644 --- a/drivers/net/ethernet/arc/emac.h +++ b/drivers/net/ethernet/arc/emac.h @@ -11,6 +11,7 @@ #include <linux/dma-mapping.h> #include <linux/netdevice.h> #include <linux/phy.h> +#include <linux/clk.h> /* STATUS and ENABLE Register bit masks */ #define TXINT_MASK (1<<0) /* Transmit interrupt */ @@ -131,6 +132,7 @@ struct arc_emac_priv { struct mii_bus *bus; void __iomem *regs; + struct clk *clk; struct napi_struct napi; struct net_device_stats stats; diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c index 9747dda..d647a7d 100644 --- a/drivers/net/ethernet/arc/emac_main.c +++ b/drivers/net/ethernet/arc/emac_main.c @@ -649,13 +649,6 @@ static int arc_emac_probe(struct platform_device *pdev) return -ENODEV; } - /* Get CPU clock frequency from device tree */ - if (of_property_read_u32(pdev->dev.of_node, "clock-frequency", - &clock_frequency)) { - dev_err(&pdev->dev, "failed to retrieve <clock-frequency> from device tree\n"); - return -EINVAL; - } - /* Get IRQ from device tree */ irq = irq_of_parse_and_map(pdev->dev.of_node, 0); if (!irq) { @@ -687,13 +680,32 @@ static int arc_emac_probe(struct platform_device *pdev) } dev_dbg(&pdev->dev, "Registers base address is 0x%p\n", priv->regs); + priv->clk = of_clk_get(pdev->dev.of_node, 0); + if (IS_ERR(priv->clk)) { + /* Get CPU clock frequency from device tree */ + if (of_property_read_u32(pdev->dev.of_node, "clock-frequency", + &clock_frequency)) { + dev_err(&pdev->dev, "failed to retrieve <clock-frequency> from device tree\n"); + err = -EINVAL; + goto out_netdev; + } + } else { + err = clk_prepare_enable(priv->clk); + if (err) { + dev_err(&pdev->dev, "failed to enable clock\n"); + goto out_clkget; + } + + clock_frequency = clk_get_rate(priv->clk); + } + id = arc_reg_get(priv, R_ID); /* Check for EMAC revision 5 or 7, magic number */ if (!(id == 0x0005fd02 || id == 0x0007fd02)) { dev_err(&pdev->dev, "ARC EMAC not detected, id=0x%x\n", id); err = -ENODEV; - goto out_netdev; + goto out_clken; } dev_info(&pdev->dev, "ARC EMAC detected with id: 0x%x\n", id); @@ -708,7 +720,7 @@ static int arc_emac_probe(struct platform_device *pdev) ndev->name, ndev); if (err) { dev_err(&pdev->dev, "could not allocate IRQ\n"); - goto out_netdev; + goto out_clken; } /* Get MAC address from device tree */ @@ -729,7 +741,7 @@ static int arc_emac_probe(struct platform_device *pdev) if (!priv->rxbd) { dev_err(&pdev->dev, "failed to allocate data buffers\n"); err = -ENOMEM; - goto out_netdev; + goto out_clken; } priv->txbd = priv->rxbd + RX_BD_NUM; @@ -741,7 +753,7 @@ static int arc_emac_probe(struct platform_device *pdev) err = arc_mdio_probe(pdev, priv); if (err) { dev_err(&pdev->dev, "failed to probe MII bus\n"); - goto out_netdev; + goto out_clken; } priv->phy_dev = of_phy_connect(ndev, phy_node, arc_emac_adjust_link, 0, @@ -771,6 +783,12 @@ out_netif_api: priv->phy_dev = NULL; out_mdio: arc_mdio_remove(priv); +out_clken: + if (!IS_ERR(priv->clk)) + clk_disable_unprepare(priv->clk); +out_clkget: + if (!IS_ERR(priv->clk)) + clk_put(priv->clk); out_netdev: free_netdev(ndev); return err; @@ -786,6 +804,12 @@ static int arc_emac_remove(struct platform_device *pdev) arc_mdio_remove(priv); unregister_netdev(ndev); netif_napi_del(&priv->napi); + + if (!IS_ERR(priv->clk)) { + clk_disable_unprepare(priv->clk); + clk_put(priv->clk); + } + free_netdev(ndev); return 0; -- 1.9.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v2 2/2] arc_emac: add clock handling @ 2014-04-25 8:06 ` Heiko Stübner 0 siblings, 0 replies; 5+ messages in thread From: Heiko Stübner @ 2014-04-25 8:06 UTC (permalink / raw) To: David S. Miller Cc: Alexey Brodkin, netdev, Max Schwarz, linux-kernel, devicetree, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala This adds ability for the arc_emac to really handle its supplying clock. To get the needed clock-frequency either a real clock or the previous clock-frequency property must be provided. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Max Schwarz <max.schwarz@online.de> --- changes since v1: - fix wrong clk error check found by Max Schwarz Documentation/devicetree/bindings/net/arc_emac.txt | 12 +++++- drivers/net/ethernet/arc/emac.h | 2 + drivers/net/ethernet/arc/emac_main.c | 46 ++++++++++++++++------ 3 files changed, 47 insertions(+), 13 deletions(-) diff --git a/Documentation/devicetree/bindings/net/arc_emac.txt b/Documentation/devicetree/bindings/net/arc_emac.txt index 7fbb027..a1d71eb 100644 --- a/Documentation/devicetree/bindings/net/arc_emac.txt +++ b/Documentation/devicetree/bindings/net/arc_emac.txt @@ -4,11 +4,15 @@ Required properties: - compatible: Should be "snps,arc-emac" - reg: Address and length of the register set for the device - interrupts: Should contain the EMAC interrupts -- clock-frequency: CPU frequency. It is needed to calculate and set polling -period of EMAC. - max-speed: see ethernet.txt file in the same directory. - phy: see ethernet.txt file in the same directory. +Clock handling: +The clock frequency is needed to calculate and set polling period of EMAC. +It must be provided by one of: +- clock-frequency: CPU frequency. +- clocks: reference to the clock supplying the EMAC. + Child nodes of the driver are the individual PHY devices connected to the MDIO bus. They must have a "reg" property given the PHY address on the MDIO bus. @@ -19,7 +23,11 @@ Examples: reg = <0xc0fc2000 0x3c>; interrupts = <6>; mac-address = [ 00 11 22 33 44 55 ]; + clock-frequency = <80000000>; + /* or */ + clocks = <&emac_clock>; + max-speed = <100>; phy = <&phy0>; diff --git a/drivers/net/ethernet/arc/emac.h b/drivers/net/ethernet/arc/emac.h index 928fac6..53f85bf 100644 --- a/drivers/net/ethernet/arc/emac.h +++ b/drivers/net/ethernet/arc/emac.h @@ -11,6 +11,7 @@ #include <linux/dma-mapping.h> #include <linux/netdevice.h> #include <linux/phy.h> +#include <linux/clk.h> /* STATUS and ENABLE Register bit masks */ #define TXINT_MASK (1<<0) /* Transmit interrupt */ @@ -131,6 +132,7 @@ struct arc_emac_priv { struct mii_bus *bus; void __iomem *regs; + struct clk *clk; struct napi_struct napi; struct net_device_stats stats; diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c index 9747dda..d647a7d 100644 --- a/drivers/net/ethernet/arc/emac_main.c +++ b/drivers/net/ethernet/arc/emac_main.c @@ -649,13 +649,6 @@ static int arc_emac_probe(struct platform_device *pdev) return -ENODEV; } - /* Get CPU clock frequency from device tree */ - if (of_property_read_u32(pdev->dev.of_node, "clock-frequency", - &clock_frequency)) { - dev_err(&pdev->dev, "failed to retrieve <clock-frequency> from device tree\n"); - return -EINVAL; - } - /* Get IRQ from device tree */ irq = irq_of_parse_and_map(pdev->dev.of_node, 0); if (!irq) { @@ -687,13 +680,32 @@ static int arc_emac_probe(struct platform_device *pdev) } dev_dbg(&pdev->dev, "Registers base address is 0x%p\n", priv->regs); + priv->clk = of_clk_get(pdev->dev.of_node, 0); + if (IS_ERR(priv->clk)) { + /* Get CPU clock frequency from device tree */ + if (of_property_read_u32(pdev->dev.of_node, "clock-frequency", + &clock_frequency)) { + dev_err(&pdev->dev, "failed to retrieve <clock-frequency> from device tree\n"); + err = -EINVAL; + goto out_netdev; + } + } else { + err = clk_prepare_enable(priv->clk); + if (err) { + dev_err(&pdev->dev, "failed to enable clock\n"); + goto out_clkget; + } + + clock_frequency = clk_get_rate(priv->clk); + } + id = arc_reg_get(priv, R_ID); /* Check for EMAC revision 5 or 7, magic number */ if (!(id == 0x0005fd02 || id == 0x0007fd02)) { dev_err(&pdev->dev, "ARC EMAC not detected, id=0x%x\n", id); err = -ENODEV; - goto out_netdev; + goto out_clken; } dev_info(&pdev->dev, "ARC EMAC detected with id: 0x%x\n", id); @@ -708,7 +720,7 @@ static int arc_emac_probe(struct platform_device *pdev) ndev->name, ndev); if (err) { dev_err(&pdev->dev, "could not allocate IRQ\n"); - goto out_netdev; + goto out_clken; } /* Get MAC address from device tree */ @@ -729,7 +741,7 @@ static int arc_emac_probe(struct platform_device *pdev) if (!priv->rxbd) { dev_err(&pdev->dev, "failed to allocate data buffers\n"); err = -ENOMEM; - goto out_netdev; + goto out_clken; } priv->txbd = priv->rxbd + RX_BD_NUM; @@ -741,7 +753,7 @@ static int arc_emac_probe(struct platform_device *pdev) err = arc_mdio_probe(pdev, priv); if (err) { dev_err(&pdev->dev, "failed to probe MII bus\n"); - goto out_netdev; + goto out_clken; } priv->phy_dev = of_phy_connect(ndev, phy_node, arc_emac_adjust_link, 0, @@ -771,6 +783,12 @@ out_netif_api: priv->phy_dev = NULL; out_mdio: arc_mdio_remove(priv); +out_clken: + if (!IS_ERR(priv->clk)) + clk_disable_unprepare(priv->clk); +out_clkget: + if (!IS_ERR(priv->clk)) + clk_put(priv->clk); out_netdev: free_netdev(ndev); return err; @@ -786,6 +804,12 @@ static int arc_emac_remove(struct platform_device *pdev) arc_mdio_remove(priv); unregister_netdev(ndev); netif_napi_del(&priv->napi); + + if (!IS_ERR(priv->clk)) { + clk_disable_unprepare(priv->clk); + clk_put(priv->clk); + } + free_netdev(ndev); return 0; -- 1.9.0 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v2 2/2] arc_emac: add clock handling 2014-04-25 8:06 ` Heiko Stübner (?) @ 2014-04-27 23:54 ` David Miller -1 siblings, 0 replies; 5+ messages in thread From: David Miller @ 2014-04-27 23:54 UTC (permalink / raw) To: heiko Cc: Alexey.Brodkin, netdev, max.schwarz, linux-kernel, devicetree, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak From: Heiko Stübner <heiko@sntech.de> Date: Fri, 25 Apr 2014 10:06:13 +0200 > This adds ability for the arc_emac to really handle its supplying clock. > To get the needed clock-frequency either a real clock or the previous > clock-frequency property must be provided. > > Signed-off-by: Heiko Stuebner <heiko@sntech.de> > Tested-by: Max Schwarz <max.schwarz@online.de> Applied. ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2 1/2] arc_emac: fix probe error path 2014-04-25 8:03 [PATCH v2 1/2] arc_emac: fix probe error path Heiko Stübner 2014-04-25 8:06 ` Heiko Stübner @ 2014-04-27 23:54 ` David Miller 1 sibling, 0 replies; 5+ messages in thread From: David Miller @ 2014-04-27 23:54 UTC (permalink / raw) To: heiko; +Cc: Alexey.Brodkin, netdev, max.schwarz, linux-kernel From: Heiko Stübner <heiko@sntech.de> Date: Fri, 25 Apr 2014 10:03:29 +0200 > The probe function at the moment only frees the netdev but does not disconnect > the phy or removes the mdio bus it registered. > > Signed-off-by: Heiko Stuebner <heiko@sntech.de> Applied. ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-04-27 23:54 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-04-25 8:03 [PATCH v2 1/2] arc_emac: fix probe error path Heiko Stübner 2014-04-25 8:06 ` [PATCH v2 2/2] arc_emac: add clock handling Heiko Stübner 2014-04-25 8:06 ` Heiko Stübner 2014-04-27 23:54 ` David Miller 2014-04-27 23:54 ` [PATCH v2 1/2] arc_emac: fix probe error path David Miller
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.