* README for the ath10k firmware repository?
@ 2013-10-21 22:07 Ben Greear
2013-10-28 9:03 ` Kalle Valo
0 siblings, 1 reply; 4+ messages in thread
From: Ben Greear @ 2013-10-21 22:07 UTC (permalink / raw)
To: ath10k
I noticed some new firmware images were added to the ath10k firmware
repository ( https://github.com/kvalo/ath10k-firmware.git).
Could someone that knows add a small README that describes what firmware
does what?
For instance, I was thinking that maybe I should rename firmware-2.bin
to firmware.bin on the host machine in order to use it..but that makes
my system not boot.
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: README for the ath10k firmware repository?
2013-10-21 22:07 README for the ath10k firmware repository? Ben Greear
@ 2013-10-28 9:03 ` Kalle Valo
2013-10-28 16:51 ` Ben Greear
0 siblings, 1 reply; 4+ messages in thread
From: Kalle Valo @ 2013-10-28 9:03 UTC (permalink / raw)
To: Ben Greear; +Cc: ath10k
Ben Greear <greearb@candelatech.com> writes:
> I noticed some new firmware images were added to the ath10k firmware
> repository ( https://github.com/kvalo/ath10k-firmware.git).
>
> Could someone that knows add a small README that describes what firmware
> does what?
I added a small readme and wrote a bit more information to the wiki:
https://github.com/kvalo/ath10k-firmware
http://wireless.kernel.org/en/users/Drivers/ath10k/firmware
Do those help?
> For instance, I was thinking that maybe I should rename firmware-2.bin
> to firmware.bin on the host machine in order to use it..but that makes
> my system not boot.
You should not rename the files, except firmware-2.bin-10.1.389 ->
firmware-2.bin.
--
Kalle Valo
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: README for the ath10k firmware repository?
2013-10-28 9:03 ` Kalle Valo
@ 2013-10-28 16:51 ` Ben Greear
2013-10-28 16:54 ` Kalle Valo
0 siblings, 1 reply; 4+ messages in thread
From: Ben Greear @ 2013-10-28 16:51 UTC (permalink / raw)
To: Kalle Valo; +Cc: ath10k
On 10/28/2013 02:03 AM, Kalle Valo wrote:
> Ben Greear <greearb@candelatech.com> writes:
>
>> I noticed some new firmware images were added to the ath10k firmware
>> repository ( https://github.com/kvalo/ath10k-firmware.git).
>>
>> Could someone that knows add a small README that describes what firmware
>> does what?
>
> I added a small readme and wrote a bit more information to the wiki:
>
> https://github.com/kvalo/ath10k-firmware
> http://wireless.kernel.org/en/users/Drivers/ath10k/firmware
>
> Do those help?
>
>> For instance, I was thinking that maybe I should rename firmware-2.bin
>> to firmware.bin on the host machine in order to use it..but that makes
>> my system not boot.
>
> You should not rename the files, except firmware-2.bin-10.1.389 ->
> firmware-2.bin.
Yes, that does help.
It is correct to say that if firmware-2.bin exists then the
firmware.bin and otp.bin will always be ignored for recent
ath10k drivers?
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: README for the ath10k firmware repository?
2013-10-28 16:51 ` Ben Greear
@ 2013-10-28 16:54 ` Kalle Valo
0 siblings, 0 replies; 4+ messages in thread
From: Kalle Valo @ 2013-10-28 16:54 UTC (permalink / raw)
To: Ben Greear; +Cc: ath10k
Ben Greear <greearb@candelatech.com> writes:
> On 10/28/2013 02:03 AM, Kalle Valo wrote:
>> Ben Greear <greearb@candelatech.com> writes:
>>
>>> I noticed some new firmware images were added to the ath10k firmware
>>> repository ( https://github.com/kvalo/ath10k-firmware.git).
>>>
>>> Could someone that knows add a small README that describes what firmware
>>> does what?
>>
>> I added a small readme and wrote a bit more information to the wiki:
>>
>> https://github.com/kvalo/ath10k-firmware
>> http://wireless.kernel.org/en/users/Drivers/ath10k/firmware
>>
>> Do those help?
>>
>>> For instance, I was thinking that maybe I should rename firmware-2.bin
>>> to firmware.bin on the host machine in order to use it..but that makes
>>> my system not boot.
>>
>> You should not rename the files, except firmware-2.bin-10.1.389 ->
>> firmware-2.bin.
>
> Yes, that does help.
>
> It is correct to say that if firmware-2.bin exists then the
> firmware.bin and otp.bin will always be ignored for recent
> ath10k drivers?
That's correct, firmware.bin and otp.bin are only to support old
versions of ath10k. Consider them obsolete now.
--
Kalle Valo
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-10-28 16:55 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-10-21 22:07 README for the ath10k firmware repository? Ben Greear
2013-10-28 9:03 ` Kalle Valo
2013-10-28 16:51 ` Ben Greear
2013-10-28 16:54 ` Kalle Valo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.