From: Kishon Vijay Abraham I <kishon@ti.com>
To: Kamil Debski <k.debski@samsung.com>
Cc: linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm@vger.kernel.org, kyungmin.park@samsung.com,
t.figa@samsung.com, s.nawrocki@samsung.com,
m.szyprowski@samsung.com, gautam.vivek@samsung.com,
mat.krawczuk@gmail.com
Subject: Re: [PATCH 4/5] usb: ehci-s5p: Change to use phy provided by the generic phy framework
Date: Fri, 25 Oct 2013 21:22:37 +0530 [thread overview]
Message-ID: <526A93C5.7050503@ti.com> (raw)
In-Reply-To: <1382710529-12082-5-git-send-email-k.debski@samsung.com>
Hi,
On Friday 25 October 2013 07:45 PM, Kamil Debski wrote:
> Change the phy provider used from the old usb phy specific to a new one
> using the generic phy framework.
looks good :-)
Thanks
Kishon
>
> Signed-off-by: Kamil Debski <k.debski@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
> drivers/usb/host/ehci-s5p.c | 21 +++++++++++----------
> 1 file changed, 11 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
> index 7cc26e6..76606ff 100644
> --- a/drivers/usb/host/ehci-s5p.c
> +++ b/drivers/usb/host/ehci-s5p.c
> @@ -19,6 +19,7 @@
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/of_gpio.h>
> +#include <linux/phy/phy.h>
> #include <linux/platform_device.h>
> #include <linux/platform_data/usb-ehci-s5p.h>
> #include <linux/usb/phy.h>
> @@ -45,7 +46,7 @@ static struct hc_driver __read_mostly s5p_ehci_hc_driver;
>
> struct s5p_ehci_hcd {
> struct clk *clk;
> - struct usb_phy *phy;
> + struct phy *phy;
> struct usb_otg *otg;
> struct s5p_ehci_platdata *pdata;
> };
> @@ -77,10 +78,11 @@ static int s5p_ehci_probe(struct platform_device *pdev)
> {
> struct s5p_ehci_platdata *pdata = pdev->dev.platform_data;
> struct s5p_ehci_hcd *s5p_ehci;
> + struct phy *phy;
> struct usb_hcd *hcd;
> struct ehci_hcd *ehci;
> struct resource *res;
> - struct usb_phy *phy;
> + const char *phy_name;
> int irq;
> int err;
>
> @@ -103,14 +105,14 @@ static int s5p_ehci_probe(struct platform_device *pdev)
> return -ENOMEM;
> }
> s5p_ehci = to_s5p_ehci(hcd);
> -
> + phy_name = of_get_property(pdev->dev.of_node, "phy-names", NULL);
> + phy = devm_phy_get(&pdev->dev, phy_name);
> if (of_device_is_compatible(pdev->dev.of_node,
> "samsung,exynos5440-ehci")) {
> s5p_ehci->pdata = &empty_platdata;
> goto skip_phy;
> }
>
> - phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
> if (IS_ERR(phy)) {
> /* Fallback to pdata */
> if (!pdata) {
> @@ -122,7 +124,6 @@ static int s5p_ehci_probe(struct platform_device *pdev)
> }
> } else {
> s5p_ehci->phy = phy;
> - s5p_ehci->otg = phy->otg;
> }
>
> skip_phy:
> @@ -166,7 +167,7 @@ skip_phy:
> s5p_ehci->otg->set_host(s5p_ehci->otg, &hcd->self);
>
> if (s5p_ehci->phy)
> - usb_phy_init(s5p_ehci->phy);
> + phy_power_on(s5p_ehci->phy);
> else if (s5p_ehci->pdata->phy_init)
> s5p_ehci->pdata->phy_init(pdev, USB_PHY_TYPE_HOST);
>
> @@ -188,7 +189,7 @@ skip_phy:
>
> fail_add_hcd:
> if (s5p_ehci->phy)
> - usb_phy_shutdown(s5p_ehci->phy);
> + phy_power_off(s5p_ehci->phy);
> else if (s5p_ehci->pdata->phy_exit)
> s5p_ehci->pdata->phy_exit(pdev, USB_PHY_TYPE_HOST);
> fail_io:
> @@ -209,7 +210,7 @@ static int s5p_ehci_remove(struct platform_device *pdev)
> s5p_ehci->otg->set_host(s5p_ehci->otg, &hcd->self);
>
> if (s5p_ehci->phy)
> - usb_phy_shutdown(s5p_ehci->phy);
> + phy_power_off(s5p_ehci->phy);
> else if (s5p_ehci->pdata->phy_exit)
> s5p_ehci->pdata->phy_exit(pdev, USB_PHY_TYPE_HOST);
>
> @@ -244,7 +245,7 @@ static int s5p_ehci_suspend(struct device *dev)
> s5p_ehci->otg->set_host(s5p_ehci->otg, &hcd->self);
>
> if (s5p_ehci->phy)
> - usb_phy_shutdown(s5p_ehci->phy);
> + phy_power_off(s5p_ehci->phy);
> else if (s5p_ehci->pdata->phy_exit)
> s5p_ehci->pdata->phy_exit(pdev, USB_PHY_TYPE_HOST);
>
> @@ -265,7 +266,7 @@ static int s5p_ehci_resume(struct device *dev)
> s5p_ehci->otg->set_host(s5p_ehci->otg, &hcd->self);
>
> if (s5p_ehci->phy)
> - usb_phy_init(s5p_ehci->phy);
> + phy_power_on(s5p_ehci->phy);
> else if (s5p_ehci->pdata->phy_init)
> s5p_ehci->pdata->phy_init(pdev, USB_PHY_TYPE_HOST);
>
>
WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Kamil Debski <k.debski@samsung.com>
Cc: <linux-kernel@vger.kernel.org>,
<linux-samsung-soc@vger.kernel.org>, <linux-usb@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-arm@vger.kernel.org>,
<kyungmin.park@samsung.com>, <t.figa@samsung.com>,
<s.nawrocki@samsung.com>, <m.szyprowski@samsung.com>,
<gautam.vivek@samsung.com>, <mat.krawczuk@gmail.com>
Subject: Re: [PATCH 4/5] usb: ehci-s5p: Change to use phy provided by the generic phy framework
Date: Fri, 25 Oct 2013 21:22:37 +0530 [thread overview]
Message-ID: <526A93C5.7050503@ti.com> (raw)
In-Reply-To: <1382710529-12082-5-git-send-email-k.debski@samsung.com>
Hi,
On Friday 25 October 2013 07:45 PM, Kamil Debski wrote:
> Change the phy provider used from the old usb phy specific to a new one
> using the generic phy framework.
looks good :-)
Thanks
Kishon
>
> Signed-off-by: Kamil Debski <k.debski@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
> drivers/usb/host/ehci-s5p.c | 21 +++++++++++----------
> 1 file changed, 11 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
> index 7cc26e6..76606ff 100644
> --- a/drivers/usb/host/ehci-s5p.c
> +++ b/drivers/usb/host/ehci-s5p.c
> @@ -19,6 +19,7 @@
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/of_gpio.h>
> +#include <linux/phy/phy.h>
> #include <linux/platform_device.h>
> #include <linux/platform_data/usb-ehci-s5p.h>
> #include <linux/usb/phy.h>
> @@ -45,7 +46,7 @@ static struct hc_driver __read_mostly s5p_ehci_hc_driver;
>
> struct s5p_ehci_hcd {
> struct clk *clk;
> - struct usb_phy *phy;
> + struct phy *phy;
> struct usb_otg *otg;
> struct s5p_ehci_platdata *pdata;
> };
> @@ -77,10 +78,11 @@ static int s5p_ehci_probe(struct platform_device *pdev)
> {
> struct s5p_ehci_platdata *pdata = pdev->dev.platform_data;
> struct s5p_ehci_hcd *s5p_ehci;
> + struct phy *phy;
> struct usb_hcd *hcd;
> struct ehci_hcd *ehci;
> struct resource *res;
> - struct usb_phy *phy;
> + const char *phy_name;
> int irq;
> int err;
>
> @@ -103,14 +105,14 @@ static int s5p_ehci_probe(struct platform_device *pdev)
> return -ENOMEM;
> }
> s5p_ehci = to_s5p_ehci(hcd);
> -
> + phy_name = of_get_property(pdev->dev.of_node, "phy-names", NULL);
> + phy = devm_phy_get(&pdev->dev, phy_name);
> if (of_device_is_compatible(pdev->dev.of_node,
> "samsung,exynos5440-ehci")) {
> s5p_ehci->pdata = &empty_platdata;
> goto skip_phy;
> }
>
> - phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
> if (IS_ERR(phy)) {
> /* Fallback to pdata */
> if (!pdata) {
> @@ -122,7 +124,6 @@ static int s5p_ehci_probe(struct platform_device *pdev)
> }
> } else {
> s5p_ehci->phy = phy;
> - s5p_ehci->otg = phy->otg;
> }
>
> skip_phy:
> @@ -166,7 +167,7 @@ skip_phy:
> s5p_ehci->otg->set_host(s5p_ehci->otg, &hcd->self);
>
> if (s5p_ehci->phy)
> - usb_phy_init(s5p_ehci->phy);
> + phy_power_on(s5p_ehci->phy);
> else if (s5p_ehci->pdata->phy_init)
> s5p_ehci->pdata->phy_init(pdev, USB_PHY_TYPE_HOST);
>
> @@ -188,7 +189,7 @@ skip_phy:
>
> fail_add_hcd:
> if (s5p_ehci->phy)
> - usb_phy_shutdown(s5p_ehci->phy);
> + phy_power_off(s5p_ehci->phy);
> else if (s5p_ehci->pdata->phy_exit)
> s5p_ehci->pdata->phy_exit(pdev, USB_PHY_TYPE_HOST);
> fail_io:
> @@ -209,7 +210,7 @@ static int s5p_ehci_remove(struct platform_device *pdev)
> s5p_ehci->otg->set_host(s5p_ehci->otg, &hcd->self);
>
> if (s5p_ehci->phy)
> - usb_phy_shutdown(s5p_ehci->phy);
> + phy_power_off(s5p_ehci->phy);
> else if (s5p_ehci->pdata->phy_exit)
> s5p_ehci->pdata->phy_exit(pdev, USB_PHY_TYPE_HOST);
>
> @@ -244,7 +245,7 @@ static int s5p_ehci_suspend(struct device *dev)
> s5p_ehci->otg->set_host(s5p_ehci->otg, &hcd->self);
>
> if (s5p_ehci->phy)
> - usb_phy_shutdown(s5p_ehci->phy);
> + phy_power_off(s5p_ehci->phy);
> else if (s5p_ehci->pdata->phy_exit)
> s5p_ehci->pdata->phy_exit(pdev, USB_PHY_TYPE_HOST);
>
> @@ -265,7 +266,7 @@ static int s5p_ehci_resume(struct device *dev)
> s5p_ehci->otg->set_host(s5p_ehci->otg, &hcd->self);
>
> if (s5p_ehci->phy)
> - usb_phy_init(s5p_ehci->phy);
> + phy_power_on(s5p_ehci->phy);
> else if (s5p_ehci->pdata->phy_init)
> s5p_ehci->pdata->phy_init(pdev, USB_PHY_TYPE_HOST);
>
>
next prev parent reply other threads:[~2013-10-25 15:52 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-25 14:15 [PATCH 0/5] phy: Add new Exynos USB PHY driver Kamil Debski
2013-10-25 14:15 ` Kamil Debski
[not found] ` <1382710529-12082-1-git-send-email-k.debski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2013-10-25 14:15 ` [PATCH v2 1/5] " Kamil Debski
2013-10-25 14:15 ` Kamil Debski
[not found] ` <1382710529-12082-2-git-send-email-k.debski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2013-10-25 15:39 ` Kishon Vijay Abraham I
2013-10-25 15:39 ` Kishon Vijay Abraham I
[not found] ` <526A90B9.3040501-l0cyMroinI0@public.gmane.org>
2013-10-28 13:52 ` Kamil Debski
2013-10-28 13:52 ` Kamil Debski
2013-10-28 20:00 ` Tomasz Figa
2013-10-29 10:16 ` Kamil Debski
[not found] ` <025b01ced3e4$ec685db0$c5391910$%debski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2013-10-29 9:52 ` Kishon Vijay Abraham I
2013-10-29 9:52 ` Kishon Vijay Abraham I
2013-10-25 21:36 ` Kumar Gala
2013-10-25 21:36 ` Kumar Gala
2013-10-28 13:52 ` Kamil Debski
2013-10-25 14:15 ` [RFC PATCH 2/5] phy: Add WIP Exynos 5250 support to the " Kamil Debski
[not found] ` <1382710529-12082-3-git-send-email-k.debski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2013-10-25 15:43 ` Kishon Vijay Abraham I
2013-10-25 15:43 ` Kishon Vijay Abraham I
[not found] ` <526A91B9.1060901-l0cyMroinI0@public.gmane.org>
2013-10-28 13:52 ` Kamil Debski
2013-10-28 13:52 ` Kamil Debski
2013-10-28 14:41 ` Vivek Gautam
2013-10-29 9:55 ` Kishon Vijay Abraham I
2013-10-29 9:55 ` Kishon Vijay Abraham I
2013-10-29 10:14 ` Kamil Debski
2013-10-29 10:51 ` Kishon Vijay Abraham I
2013-10-29 10:51 ` Kishon Vijay Abraham I
2013-10-25 14:15 ` [PATCH 3/5] phy: Add support for S5PV210 " Kamil Debski
[not found] ` <1382710529-12082-4-git-send-email-k.debski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2013-10-25 15:50 ` Kishon Vijay Abraham I
2013-10-25 15:50 ` Kishon Vijay Abraham I
[not found] ` <526A933C.4020904-l0cyMroinI0@public.gmane.org>
2013-10-26 1:40 ` Jingoo Han
2013-10-26 1:40 ` Jingoo Han
2013-10-25 14:15 ` [PATCH 4/5] usb: ehci-s5p: Change to use phy provided by the generic phy framework Kamil Debski
2013-10-25 15:52 ` Kishon Vijay Abraham I [this message]
2013-10-25 15:52 ` Kishon Vijay Abraham I
2013-10-26 1:27 ` Jingoo Han
[not found] ` <003101ced1ea$85f7e010$91e7a030$%han-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2013-10-28 13:52 ` Kamil Debski
2013-10-28 13:52 ` Kamil Debski
[not found] ` <1382710529-12082-5-git-send-email-k.debski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2013-10-26 9:41 ` Vivek Gautam
2013-10-26 9:41 ` Vivek Gautam
2013-10-28 13:53 ` Kamil Debski
[not found] ` <025f01ced3e5$0660ecf0$1322c6d0$%debski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2013-10-28 14:36 ` Vivek Gautam
2013-10-28 14:36 ` Vivek Gautam
2013-10-25 14:15 ` [PATCH 5/5] usb: s3c-hsotg: Use the new Exynos USB phy driver with " Kamil Debski
2013-10-25 15:53 ` Kishon Vijay Abraham I
2013-10-25 15:53 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=526A93C5.7050503@ti.com \
--to=kishon@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=gautam.vivek@samsung.com \
--cc=k.debski@samsung.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-arm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=mat.krawczuk@gmail.com \
--cc=s.nawrocki@samsung.com \
--cc=t.figa@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.