All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 2/2] ARM: shmobile: Koelsch: add Ether support
Date: Thu, 31 Oct 2013 18:47:02 +0000	[thread overview]
Message-ID: <5272B3B1.8090503@cogentembedded.com> (raw)
In-Reply-To: <CANqRtoTNJAnqavonOwtqe5_HDdPwK1-JAixNuz5z7ttQw-T64Q@mail.gmail.com>

Hello.

On 10/31/2013 11:10 AM, Magnus Damm wrote:

>> Register Ether platform device and pin data on  the  Koelsch board.
>> Register platform fixup for Micrel KSZ8041 PHY, just like on the Lager board.

>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

>> ---
>>   arch/arm/mach-shmobile/board-koelsch.c |   61 ++++++++++++++++++++++++++++++++-
>>   1 file changed, 60 insertions(+), 1 deletion(-)
>>
>> Index: renesas/arch/arm/mach-shmobile/board-koelsch.c
>> =================================>> --- renesas.orig/arch/arm/mach-shmobile/board-koelsch.c
>> +++ renesas/arch/arm/mach-shmobile/board-koelsch.c

>> @@ -70,11 +87,29 @@ static const struct gpio_keys_platform_d
>>          .nbuttons       = ARRAY_SIZE(gpio_buttons),
>>   };
>>
>> +static const struct pinctrl_map koelsch_pinctrl_map[] = {
>> +       /* Ether */
>> +       PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7791",
>> +                                 "eth_link", "eth"),
>> +       PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7791",
>> +                                 "eth_mdio", "eth"),
>> +       PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7791",
>> +                                 "eth_rmii", "eth"),
>> +};

> Once again we seem to be using r8a7790 when the actual SoC is r8a7791.

    Note that the last time it was in the DT context which is not quite the 
same as platfrom device context.

> If you're going to go down the route of using the SoC name then please

    I don't have much choice here. Though we could have used used R-Car 
gen1/gen2 terminology (at least in the hindsight)...

> use the correct one at least.

    It wasn't me who used "r8a7790-ether" name in the first place, it was 
Simon. And as these 2 SoCs are indistinguishable at least from the 'sh_eth' 
driver's point of view, I wouldn't want to introduce another platform device 
ID, especially as it hasn't been done for R8A777[89] SoCs. What I can offer is 
renaming "r8a7790-ether" to "r8a779x-ether" if you really want.

> Cheers,

> / magnus

WBR, Sergei


WARNING: multiple messages have this Message-ID (diff)
From: sergei.shtylyov@cogentembedded.com (Sergei Shtylyov)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] ARM: shmobile: Koelsch: add Ether support
Date: Thu, 31 Oct 2013 22:46:57 +0300	[thread overview]
Message-ID: <5272B3B1.8090503@cogentembedded.com> (raw)
In-Reply-To: <CANqRtoTNJAnqavonOwtqe5_HDdPwK1-JAixNuz5z7ttQw-T64Q@mail.gmail.com>

Hello.

On 10/31/2013 11:10 AM, Magnus Damm wrote:

>> Register Ether platform device and pin data on  the  Koelsch board.
>> Register platform fixup for Micrel KSZ8041 PHY, just like on the Lager board.

>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

>> ---
>>   arch/arm/mach-shmobile/board-koelsch.c |   61 ++++++++++++++++++++++++++++++++-
>>   1 file changed, 60 insertions(+), 1 deletion(-)
>>
>> Index: renesas/arch/arm/mach-shmobile/board-koelsch.c
>> ===================================================================
>> --- renesas.orig/arch/arm/mach-shmobile/board-koelsch.c
>> +++ renesas/arch/arm/mach-shmobile/board-koelsch.c

>> @@ -70,11 +87,29 @@ static const struct gpio_keys_platform_d
>>          .nbuttons       = ARRAY_SIZE(gpio_buttons),
>>   };
>>
>> +static const struct pinctrl_map koelsch_pinctrl_map[] = {
>> +       /* Ether */
>> +       PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7791",
>> +                                 "eth_link", "eth"),
>> +       PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7791",
>> +                                 "eth_mdio", "eth"),
>> +       PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7791",
>> +                                 "eth_rmii", "eth"),
>> +};

> Once again we seem to be using r8a7790 when the actual SoC is r8a7791.

    Note that the last time it was in the DT context which is not quite the 
same as platfrom device context.

> If you're going to go down the route of using the SoC name then please

    I don't have much choice here. Though we could have used used R-Car 
gen1/gen2 terminology (at least in the hindsight)...

> use the correct one at least.

    It wasn't me who used "r8a7790-ether" name in the first place, it was 
Simon. And as these 2 SoCs are indistinguishable at least from the 'sh_eth' 
driver's point of view, I wouldn't want to introduce another platform device 
ID, especially as it hasn't been done for R8A777[89] SoCs. What I can offer is 
renaming "r8a7790-ether" to "r8a779x-ether" if you really want.

> Cheers,

> / magnus

WBR, Sergei

  reply	other threads:[~2013-10-31 18:47 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-30 22:16 [PATCH 0/2] Add Ether support for R8A7791/Koelsch board Sergei Shtylyov
2013-10-30 23:16 ` Sergei Shtylyov
2013-10-30 22:18 ` [PATCH 1/2] ARM: shmobile: r8a7791: add Ether clock Sergei Shtylyov
2013-10-30 23:18   ` Sergei Shtylyov
2013-10-31  6:06   ` Simon Horman
2013-10-31  6:06     ` Simon Horman
2013-10-31 20:50     ` Sergei Shtylyov
2013-10-31 21:50       ` Sergei Shtylyov
2013-11-01  6:29       ` Simon Horman
2013-11-01  6:29         ` Simon Horman
2013-12-19 17:59   ` [PATCH 1/2] arm: shmobile: r8a7791: Add SATA clocks Valentine Barshak
2014-01-09  8:25   ` Simon Horman
2014-02-06 21:12   ` [PATCH 1/2] ARM: shmobile: r8a7791: add Ether DT support Sergei Shtylyov
2014-02-06 22:12     ` Sergei Shtylyov
2014-02-06 22:12     ` Sergei Shtylyov
2014-02-10 12:54     ` Ben Dooks
2014-02-10 12:54       ` Ben Dooks
2014-02-10 12:54       ` Ben Dooks
2014-02-10 13:24       ` Sergei Shtylyov
2014-02-10 13:24         ` Sergei Shtylyov
2014-02-10 13:24         ` Sergei Shtylyov
2014-05-29 11:05   ` [PATCH 1/2] arm: shmobile: r8a7791: add USB3.0 clocks to device tree Yoshihiro Shimoda
2014-05-29 11:05     ` Yoshihiro Shimoda
2014-05-29 11:05     ` Yoshihiro Shimoda
2013-10-30 22:20 ` [PATCH 2/2] ARM: shmobile: Koelsch: add Ether support Sergei Shtylyov
2013-10-30 23:19   ` Sergei Shtylyov
2013-10-31  5:02   ` Simon Horman
2013-10-31  5:02     ` Simon Horman
2013-10-31 20:25     ` Sergei Shtylyov
2013-10-31 21:24       ` Sergei Shtylyov
2013-10-31  8:06   ` Magnus Damm
2013-10-31  8:06     ` Magnus Damm
2013-10-31 18:03     ` Sergei Shtylyov
2013-10-31 19:03       ` Sergei Shtylyov
2013-12-09 18:58       ` Sergei Shtylyov
2013-12-09 19:57         ` Sergei Shtylyov
2013-12-09 21:14         ` Sergei Shtylyov
2013-12-09 22:14           ` Sergei Shtylyov
2013-12-18 20:23         ` Sergei Shtylyov
2013-12-18 21:23           ` Sergei Shtylyov
2013-10-31  8:10   ` Magnus Damm
2013-10-31  8:10     ` Magnus Damm
2013-10-31 18:47     ` Sergei Shtylyov [this message]
2013-10-31 19:46       ` Sergei Shtylyov
2013-12-19 17:59   ` [PATCH 2/2] arm: shmobile: koelsch: Add SATA support Valentine Barshak
2014-11-11  4:37   ` [PATCH 2/2] ARM: shmobile: koelsch: add Volume Ramp usage on comment Kuninori Morimoto

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5272B3B1.8090503@cogentembedded.com \
    --to=sergei.shtylyov@cogentembedded.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.