[PATCH 0/6] arm: zynq: BSP update

[PATCH 0/6] arm: zynq: BSP update

[Soren Brinkmann]

These are a few updates and fixes for the Zynq BSP coming
cherry-picked/ported from the Xilinx vendor tree.

	S?ren

Michal Simek (1):
  arm: zynq: Add support for zynq_cpu_kill function

Peter Crosthwaite (1):
  arm: zynq: platsmp: Fix CPU presence check

Soren Brinkmann (4):
  arm: zynq: Invalidate L1 in secondary boot
  arm: zynq: Use of_platform_populate instead of bus_probe
  arm: zynq: Set proper GIC flags
  arm: zynq: headsmp: Move .glbl out of actual code

 arch/arm/mach-zynq/common.c  | 16 ++++++++++------
 arch/arm/mach-zynq/common.h  |  2 ++
 arch/arm/mach-zynq/headsmp.S | 11 ++++++++---
 arch/arm/mach-zynq/platsmp.c | 13 +++++++++++--
 4 files changed, 31 insertions(+), 11 deletions(-)

-- 
1.8.4.1

[PATCH 0/6] arm: zynq: BSP update

[Soren Brinkmann]

These are a few updates and fixes for the Zynq BSP coming
cherry-picked/ported from the Xilinx vendor tree.

	Sören

Michal Simek (1):
  arm: zynq: Add support for zynq_cpu_kill function

Peter Crosthwaite (1):
  arm: zynq: platsmp: Fix CPU presence check

Soren Brinkmann (4):
  arm: zynq: Invalidate L1 in secondary boot
  arm: zynq: Use of_platform_populate instead of bus_probe
  arm: zynq: Set proper GIC flags
  arm: zynq: headsmp: Move .glbl out of actual code

 arch/arm/mach-zynq/common.c  | 16 ++++++++++------
 arch/arm/mach-zynq/common.h  |  2 ++
 arch/arm/mach-zynq/headsmp.S | 11 ++++++++---
 arch/arm/mach-zynq/platsmp.c | 13 +++++++++++--
 4 files changed, 31 insertions(+), 11 deletions(-)

-- 
1.8.4.1

[PATCH 1/6] arm: zynq: platsmp: Fix CPU presence check

[Soren Brinkmann]

From: Peter Crosthwaite <peter.crosthwaite@xilinx.com>

Fix an off-by-one error in the logic that checks if a CPU is present.
The ncores variable is a count of cores while the cpu variable is a
0 based index. So if ncores == cpu, cpu is out of range. Fix this
comparison so non-existent CPUs are not probed.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/arm/mach-zynq/platsmp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-zynq/platsmp.c b/arch/arm/mach-zynq/platsmp.c
index 689fbbc3d9c8..2512624e657d 100644
--- a/arch/arm/mach-zynq/platsmp.c
+++ b/arch/arm/mach-zynq/platsmp.c
@@ -39,7 +39,7 @@ int zynq_cpun_start(u32 address, int cpu)
 	u32 trampoline_code_size = &zynq_secondary_trampoline_end -
 						&zynq_secondary_trampoline;
 
-	if (cpu > ncores) {
+	if (cpu >= ncores) {
 		pr_warn("CPU No. is not available in the system\n");
 		return -1;
 	}
-- 
1.8.4.1

[PATCH 1/6] arm: zynq: platsmp: Fix CPU presence check

[Soren Brinkmann]

From: Peter Crosthwaite <peter.crosthwaite@xilinx.com>

Fix an off-by-one error in the logic that checks if a CPU is present.
The ncores variable is a count of cores while the cpu variable is a
0 based index. So if ncores == cpu, cpu is out of range. Fix this
comparison so non-existent CPUs are not probed.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/arm/mach-zynq/platsmp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-zynq/platsmp.c b/arch/arm/mach-zynq/platsmp.c
index 689fbbc3d9c8..2512624e657d 100644
--- a/arch/arm/mach-zynq/platsmp.c
+++ b/arch/arm/mach-zynq/platsmp.c
@@ -39,7 +39,7 @@ int zynq_cpun_start(u32 address, int cpu)
 	u32 trampoline_code_size = &zynq_secondary_trampoline_end -
 						&zynq_secondary_trampoline;
 
-	if (cpu > ncores) {
+	if (cpu >= ncores) {
 		pr_warn("CPU No. is not available in the system\n");
 		return -1;
 	}
-- 
1.8.4.1

[PATCH 1/6] arm: zynq: platsmp: Fix CPU presence check

[Russell King - ARM Linux]

On Thu, Oct 31, 2013 at 09:10:14AM -0700, Soren Brinkmann wrote:
> From: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
> 
> Fix an off-by-one error in the logic that checks if a CPU is present.
> The ncores variable is a count of cores while the cpu variable is a
> 0 based index. So if ncores == cpu, cpu is out of range. Fix this
> comparison so non-existent CPUs are not probed.
> 
> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>

There's another two bugs here.

> ---
>  arch/arm/mach-zynq/platsmp.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-zynq/platsmp.c b/arch/arm/mach-zynq/platsmp.c
> index 689fbbc3d9c8..2512624e657d 100644
> --- a/arch/arm/mach-zynq/platsmp.c
> +++ b/arch/arm/mach-zynq/platsmp.c
> @@ -39,7 +39,7 @@ int zynq_cpun_start(u32 address, int cpu)
>  	u32 trampoline_code_size = &zynq_secondary_trampoline_end -
>  						&zynq_secondary_trampoline;
>  
> -	if (cpu > ncores) {
> +	if (cpu >= ncores) {
>  		pr_warn("CPU No. is not available in the system\n");

Much better: pr_warn("CPU%d is not available\n", cpu);

However, if you have set the cpu possible/present masks correctly,
you will never hit this because the generic code already checks that
the CPU being requested is legal.  So actually I'd suggest getting
rid of this entire if() statement and block.

>  		return -1;

The second issue is one of laziness.  -1 as a return code for something
that gets propagated back to userspace.  Do we really mean to return to
userspace -EPERM because of this or other failures in this function?
All those idiotic and lazy (and that's exactly what they are - idiotic
and lazy) "return -1" statements need to be fixed.

Shame on the arm-soc maintainers for not having an automatic filter for
this kind of sloppy programming.

Re: [PATCH 1/6] arm: zynq: platsmp: Fix CPU presence check

[Russell King - ARM Linux]

On Thu, Oct 31, 2013 at 09:10:14AM -0700, Soren Brinkmann wrote:
> From: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
> 
> Fix an off-by-one error in the logic that checks if a CPU is present.
> The ncores variable is a count of cores while the cpu variable is a
> 0 based index. So if ncores == cpu, cpu is out of range. Fix this
> comparison so non-existent CPUs are not probed.
> 
> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>

There's another two bugs here.

> ---
>  arch/arm/mach-zynq/platsmp.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-zynq/platsmp.c b/arch/arm/mach-zynq/platsmp.c
> index 689fbbc3d9c8..2512624e657d 100644
> --- a/arch/arm/mach-zynq/platsmp.c
> +++ b/arch/arm/mach-zynq/platsmp.c
> @@ -39,7 +39,7 @@ int zynq_cpun_start(u32 address, int cpu)
>  	u32 trampoline_code_size = &zynq_secondary_trampoline_end -
>  						&zynq_secondary_trampoline;
>  
> -	if (cpu > ncores) {
> +	if (cpu >= ncores) {
>  		pr_warn("CPU No. is not available in the system\n");

Much better: pr_warn("CPU%d is not available\n", cpu);

However, if you have set the cpu possible/present masks correctly,
you will never hit this because the generic code already checks that
the CPU being requested is legal.  So actually I'd suggest getting
rid of this entire if() statement and block.

>  		return -1;

The second issue is one of laziness.  -1 as a return code for something
that gets propagated back to userspace.  Do we really mean to return to
userspace -EPERM because of this or other failures in this function?
All those idiotic and lazy (and that's exactly what they are - idiotic
and lazy) "return -1" statements need to be fixed.

Shame on the arm-soc maintainers for not having an automatic filter for
this kind of sloppy programming.

[PATCH] arm: zynq: platsmp: Remove CPU presence check

[Soren Brinkmann]

The generic code already checks that the CPU being requested is legal if
the cpu possible/present masks are set correctly.

Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
As per Russel's suggestion, consider this alternative for 1/6.

	S?ren

 arch/arm/mach-zynq/platsmp.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/arch/arm/mach-zynq/platsmp.c b/arch/arm/mach-zynq/platsmp.c
index bc730eb38f00..8021499e7b70 100644
--- a/arch/arm/mach-zynq/platsmp.c
+++ b/arch/arm/mach-zynq/platsmp.c
@@ -39,11 +39,6 @@ int zynq_cpun_start(u32 address, int cpu)
 	u32 trampoline_code_size = &zynq_secondary_trampoline_end -
 						&zynq_secondary_trampoline;
 
-	if (cpu > ncores) {
-		pr_warn("CPU No. is not available in the system\n");
-		return -1;
-	}
-
 	/* MS: Expectation that SLCR are directly map and accessible */
 	/* Not possible to jump to non aligned address */
 	if (!(address & 3) && (!address || (address >= trampoline_code_size))) {
-- 
1.8.4.1

[PATCH] arm: zynq: platsmp: Remove CPU presence check

[Soren Brinkmann]

The generic code already checks that the CPU being requested is legal if
the cpu possible/present masks are set correctly.

Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
As per Russel's suggestion, consider this alternative for 1/6.

	Sören

 arch/arm/mach-zynq/platsmp.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/arch/arm/mach-zynq/platsmp.c b/arch/arm/mach-zynq/platsmp.c
index bc730eb38f00..8021499e7b70 100644
--- a/arch/arm/mach-zynq/platsmp.c
+++ b/arch/arm/mach-zynq/platsmp.c
@@ -39,11 +39,6 @@ int zynq_cpun_start(u32 address, int cpu)
 	u32 trampoline_code_size = &zynq_secondary_trampoline_end -
 						&zynq_secondary_trampoline;
 
-	if (cpu > ncores) {
-		pr_warn("CPU No. is not available in the system\n");
-		return -1;
-	}
-
 	/* MS: Expectation that SLCR are directly map and accessible */
 	/* Not possible to jump to non aligned address */
 	if (!(address & 3) && (!address || (address >= trampoline_code_size))) {
-- 
1.8.4.1

[PATCH 1/6] arm: zynq: platsmp: Fix CPU presence check

[Sudeep KarkadaNagesha]

Hi Soren,

On 31/10/13 16:10, Soren Brinkmann wrote:
> From: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
> 
> Fix an off-by-one error in the logic that checks if a CPU is present.
> The ncores variable is a count of cores while the cpu variable is a
> 0 based index. So if ncores == cpu, cpu is out of range. Fix this
> comparison so non-existent CPUs are not probed.
>

Not entirely related to this patch, I had found that zynq_smp_prepare_cpus is
setting cpu_present_mask which is redundant(CMIIW present == possible). I had
posted a patch[1] to remove that, consider including that in the series if you
think it make sense.

Regards,
Sudeep

[1] http://www.spinics.net/lists/arm-kernel/msg260734.html

> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> ---
>  arch/arm/mach-zynq/platsmp.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-zynq/platsmp.c b/arch/arm/mach-zynq/platsmp.c
> index 689fbbc3d9c8..2512624e657d 100644
> --- a/arch/arm/mach-zynq/platsmp.c
> +++ b/arch/arm/mach-zynq/platsmp.c
> @@ -39,7 +39,7 @@ int zynq_cpun_start(u32 address, int cpu)
>  	u32 trampoline_code_size = &zynq_secondary_trampoline_end -
>  						&zynq_secondary_trampoline;
>  
> -	if (cpu > ncores) {
> +	if (cpu >= ncores) {
>  		pr_warn("CPU No. is not available in the system\n");
>  		return -1;
>  	}
> 

Re: [PATCH 1/6] arm: zynq: platsmp: Fix CPU presence check

[Sudeep KarkadaNagesha]

Hi Soren,

On 31/10/13 16:10, Soren Brinkmann wrote:
> From: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
> 
> Fix an off-by-one error in the logic that checks if a CPU is present.
> The ncores variable is a count of cores while the cpu variable is a
> 0 based index. So if ncores == cpu, cpu is out of range. Fix this
> comparison so non-existent CPUs are not probed.
>

Not entirely related to this patch, I had found that zynq_smp_prepare_cpus is
setting cpu_present_mask which is redundant(CMIIW present == possible). I had
posted a patch[1] to remove that, consider including that in the series if you
think it make sense.

Regards,
Sudeep

[1] http://www.spinics.net/lists/arm-kernel/msg260734.html

> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> ---
>  arch/arm/mach-zynq/platsmp.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-zynq/platsmp.c b/arch/arm/mach-zynq/platsmp.c
> index 689fbbc3d9c8..2512624e657d 100644
> --- a/arch/arm/mach-zynq/platsmp.c
> +++ b/arch/arm/mach-zynq/platsmp.c
> @@ -39,7 +39,7 @@ int zynq_cpun_start(u32 address, int cpu)
>  	u32 trampoline_code_size = &zynq_secondary_trampoline_end -
>  						&zynq_secondary_trampoline;
>  
> -	if (cpu > ncores) {
> +	if (cpu >= ncores) {
>  		pr_warn("CPU No. is not available in the system\n");
>  		return -1;
>  	}
> 

[PATCH 2/6] arm: zynq: Invalidate L1 in secondary boot

[Soren Brinkmann]

During boot, Linux initiates a clean-invalidate operation only, resulting
in faulty data to be written to the memory system during resume.
Therefore invalidate the L1 in the secondary boot path to avoid these
issues.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/arm/mach-zynq/common.h  | 2 ++
 arch/arm/mach-zynq/headsmp.S | 6 +++++-
 arch/arm/mach-zynq/platsmp.c | 2 +-
 3 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h
index 3040d219570f..c22c92cea8cb 100644
--- a/arch/arm/mach-zynq/common.h
+++ b/arch/arm/mach-zynq/common.h
@@ -17,6 +17,8 @@
 #ifndef __MACH_ZYNQ_COMMON_H__
 #define __MACH_ZYNQ_COMMON_H__
 
+void zynq_secondary_startup(void);
+
 extern int zynq_slcr_init(void);
 extern void zynq_slcr_system_reset(void);
 extern void zynq_slcr_cpu_stop(int cpu);
diff --git a/arch/arm/mach-zynq/headsmp.S b/arch/arm/mach-zynq/headsmp.S
index d4cd5f34fe5c..57a32869f0aa 100644
--- a/arch/arm/mach-zynq/headsmp.S
+++ b/arch/arm/mach-zynq/headsmp.S
@@ -18,5 +18,9 @@ zynq_secondary_trampoline_jump:
 	.word	/* cpu 1 */
 .globl zynq_secondary_trampoline_end
 zynq_secondary_trampoline_end:
-
 ENDPROC(zynq_secondary_trampoline)
+
+ENTRY(zynq_secondary_startup)
+	bl	v7_invalidate_l1
+	b	secondary_startup
+ENDPROC(zynq_secondary_startup)
diff --git a/arch/arm/mach-zynq/platsmp.c b/arch/arm/mach-zynq/platsmp.c
index 2512624e657d..daed70682c54 100644
--- a/arch/arm/mach-zynq/platsmp.c
+++ b/arch/arm/mach-zynq/platsmp.c
@@ -95,7 +95,7 @@ EXPORT_SYMBOL(zynq_cpun_start);
 static int zynq_boot_secondary(unsigned int cpu,
 						struct task_struct *idle)
 {
-	return zynq_cpun_start(virt_to_phys(secondary_startup), cpu);
+	return zynq_cpun_start(virt_to_phys(zynq_secondary_startup), cpu);
 }
 
 /*
-- 
1.8.4.1

[PATCH 2/6] arm: zynq: Invalidate L1 in secondary boot

[Soren Brinkmann]

During boot, Linux initiates a clean-invalidate operation only, resulting
in faulty data to be written to the memory system during resume.
Therefore invalidate the L1 in the secondary boot path to avoid these
issues.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/arm/mach-zynq/common.h  | 2 ++
 arch/arm/mach-zynq/headsmp.S | 6 +++++-
 arch/arm/mach-zynq/platsmp.c | 2 +-
 3 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h
index 3040d219570f..c22c92cea8cb 100644
--- a/arch/arm/mach-zynq/common.h
+++ b/arch/arm/mach-zynq/common.h
@@ -17,6 +17,8 @@
 #ifndef __MACH_ZYNQ_COMMON_H__
 #define __MACH_ZYNQ_COMMON_H__
 
+void zynq_secondary_startup(void);
+
 extern int zynq_slcr_init(void);
 extern void zynq_slcr_system_reset(void);
 extern void zynq_slcr_cpu_stop(int cpu);
diff --git a/arch/arm/mach-zynq/headsmp.S b/arch/arm/mach-zynq/headsmp.S
index d4cd5f34fe5c..57a32869f0aa 100644
--- a/arch/arm/mach-zynq/headsmp.S
+++ b/arch/arm/mach-zynq/headsmp.S
@@ -18,5 +18,9 @@ zynq_secondary_trampoline_jump:
 	.word	/* cpu 1 */
 .globl zynq_secondary_trampoline_end
 zynq_secondary_trampoline_end:
-
 ENDPROC(zynq_secondary_trampoline)
+
+ENTRY(zynq_secondary_startup)
+	bl	v7_invalidate_l1
+	b	secondary_startup
+ENDPROC(zynq_secondary_startup)
diff --git a/arch/arm/mach-zynq/platsmp.c b/arch/arm/mach-zynq/platsmp.c
index 2512624e657d..daed70682c54 100644
--- a/arch/arm/mach-zynq/platsmp.c
+++ b/arch/arm/mach-zynq/platsmp.c
@@ -95,7 +95,7 @@ EXPORT_SYMBOL(zynq_cpun_start);
 static int zynq_boot_secondary(unsigned int cpu,
 						struct task_struct *idle)
 {
-	return zynq_cpun_start(virt_to_phys(secondary_startup), cpu);
+	return zynq_cpun_start(virt_to_phys(zynq_secondary_startup), cpu);
 }
 
 /*
-- 
1.8.4.1

[PATCH 3/6] arm: zynq: Add support for zynq_cpu_kill function

[Soren Brinkmann]

From: Michal Simek <michal.simek@xilinx.com>

Use simple hook to slcr to stop cpu.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/arm/mach-zynq/platsmp.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/mach-zynq/platsmp.c b/arch/arm/mach-zynq/platsmp.c
index daed70682c54..4f592a7efc10 100644
--- a/arch/arm/mach-zynq/platsmp.c
+++ b/arch/arm/mach-zynq/platsmp.c
@@ -126,11 +126,20 @@ static void __init zynq_smp_prepare_cpus(unsigned int max_cpus)
 	scu_enable(zynq_scu_base);
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
+static int zynq_cpu_kill(unsigned cpu)
+{
+	zynq_slcr_cpu_stop(cpu);
+	return 1;
+}
+#endif
+
 struct smp_operations zynq_smp_ops __initdata = {
 	.smp_init_cpus		= zynq_smp_init_cpus,
 	.smp_prepare_cpus	= zynq_smp_prepare_cpus,
 	.smp_boot_secondary	= zynq_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_die		= zynq_platform_cpu_die,
+	.cpu_kill		= zynq_cpu_kill,
 #endif
 };
-- 
1.8.4.1

[PATCH 3/6] arm: zynq: Add support for zynq_cpu_kill function

[Soren Brinkmann]

From: Michal Simek <michal.simek@xilinx.com>

Use simple hook to slcr to stop cpu.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/arm/mach-zynq/platsmp.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/mach-zynq/platsmp.c b/arch/arm/mach-zynq/platsmp.c
index daed70682c54..4f592a7efc10 100644
--- a/arch/arm/mach-zynq/platsmp.c
+++ b/arch/arm/mach-zynq/platsmp.c
@@ -126,11 +126,20 @@ static void __init zynq_smp_prepare_cpus(unsigned int max_cpus)
 	scu_enable(zynq_scu_base);
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
+static int zynq_cpu_kill(unsigned cpu)
+{
+	zynq_slcr_cpu_stop(cpu);
+	return 1;
+}
+#endif
+
 struct smp_operations zynq_smp_ops __initdata = {
 	.smp_init_cpus		= zynq_smp_init_cpus,
 	.smp_prepare_cpus	= zynq_smp_prepare_cpus,
 	.smp_boot_secondary	= zynq_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_die		= zynq_platform_cpu_die,
+	.cpu_kill		= zynq_cpu_kill,
 #endif
 };
-- 
1.8.4.1

[PATCH 4/6] arm: zynq: Use of_platform_populate instead of bus_probe

[Soren Brinkmann]

All new boards should be using this function instead of
of_platform_bus_probe.

Two side effects:
1. Possible to probe node which are not in the bus
2. Remove bus_id table from platform code

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
 arch/arm/mach-zynq/common.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 5f252569c689..5690925519bf 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -39,11 +39,6 @@
 
 void __iomem *zynq_scu_base;
 
-static struct of_device_id zynq_of_bus_ids[] __initdata = {
-	{ .compatible = "simple-bus", },
-	{}
-};
-
 /**
  * zynq_init_machine - System specific initialization, intended to be
  *		       called from board specific initialization.
@@ -55,7 +50,7 @@ static void __init zynq_init_machine(void)
 	 */
 	l2x0_of_init(0x02060000, 0xF0F0FFFF);
 
-	of_platform_bus_probe(NULL, zynq_of_bus_ids, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static void __init zynq_timer_init(void)
-- 
1.8.4.1

[PATCH 4/6] arm: zynq: Use of_platform_populate instead of bus_probe

[Soren Brinkmann]

All new boards should be using this function instead of
of_platform_bus_probe.

Two side effects:
1. Possible to probe node which are not in the bus
2. Remove bus_id table from platform code

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
 arch/arm/mach-zynq/common.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 5f252569c689..5690925519bf 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -39,11 +39,6 @@
 
 void __iomem *zynq_scu_base;
 
-static struct of_device_id zynq_of_bus_ids[] __initdata = {
-	{ .compatible = "simple-bus", },
-	{}
-};
-
 /**
  * zynq_init_machine - System specific initialization, intended to be
  *		       called from board specific initialization.
@@ -55,7 +50,7 @@ static void __init zynq_init_machine(void)
 	 */
 	l2x0_of_init(0x02060000, 0xF0F0FFFF);
 
-	of_platform_bus_probe(NULL, zynq_of_bus_ids, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static void __init zynq_timer_init(void)
-- 
1.8.4.1

[PATCH 5/6] arm: zynq: Set proper GIC flags

[Soren Brinkmann]

Zynq is able to wake up on any IRQ, so flag it with
IRQCHIP_SKIP_SET_WAKE, and we want to mask off the IRQs when
going to suspend to avoid transient effects so also flag
this with IRQCHIP_MASK_ON_SUSPEND.

This is essentially, making the same changes as commit
'ARM: ux500: set proper GIC flags'
(sha1: 7e1f97ea8ffa66679252520dbbbd6ec413ecae68) for Zynq.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
 arch/arm/mach-zynq/common.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 5690925519bf..eb59bae37c04 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -25,6 +25,8 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/of.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -86,6 +88,12 @@ static void __init zynq_map_io(void)
 	zynq_scu_map_io();
 }
 
+static void __init zynq_irq_init(void)
+{
+	gic_arch_extn.flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND;
+	irqchip_init();
+}
+
 static void zynq_system_reset(enum reboot_mode mode, const char *cmd)
 {
 	zynq_slcr_system_reset();
@@ -99,6 +107,7 @@ static const char * const zynq_dt_match[] = {
 DT_MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
 	.smp		= smp_ops(zynq_smp_ops),
 	.map_io		= zynq_map_io,
+	.init_irq	= zynq_irq_init,
 	.init_machine	= zynq_init_machine,
 	.init_time	= zynq_timer_init,
 	.dt_compat	= zynq_dt_match,
-- 
1.8.4.1

[PATCH 5/6] arm: zynq: Set proper GIC flags

[Soren Brinkmann]

Zynq is able to wake up on any IRQ, so flag it with
IRQCHIP_SKIP_SET_WAKE, and we want to mask off the IRQs when
going to suspend to avoid transient effects so also flag
this with IRQCHIP_MASK_ON_SUSPEND.

This is essentially, making the same changes as commit
'ARM: ux500: set proper GIC flags'
(sha1: 7e1f97ea8ffa66679252520dbbbd6ec413ecae68) for Zynq.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
 arch/arm/mach-zynq/common.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 5690925519bf..eb59bae37c04 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -25,6 +25,8 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/of.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -86,6 +88,12 @@ static void __init zynq_map_io(void)
 	zynq_scu_map_io();
 }
 
+static void __init zynq_irq_init(void)
+{
+	gic_arch_extn.flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND;
+	irqchip_init();
+}
+
 static void zynq_system_reset(enum reboot_mode mode, const char *cmd)
 {
 	zynq_slcr_system_reset();
@@ -99,6 +107,7 @@ static const char * const zynq_dt_match[] = {
 DT_MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
 	.smp		= smp_ops(zynq_smp_ops),
 	.map_io		= zynq_map_io,
+	.init_irq	= zynq_irq_init,
 	.init_machine	= zynq_init_machine,
 	.init_time	= zynq_timer_init,
 	.dt_compat	= zynq_dt_match,
-- 
1.8.4.1

[PATCH 6/6] arm: zynq: headsmp: Move .glbl out of actual code

[Soren Brinkmann]

Move the .glbl lines exporting symbols to the top of the file and out of
the actual code, in order to make the code more readable.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
 arch/arm/mach-zynq/headsmp.S | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-zynq/headsmp.S b/arch/arm/mach-zynq/headsmp.S
index 57a32869f0aa..12d1b40c7d78 100644
--- a/arch/arm/mach-zynq/headsmp.S
+++ b/arch/arm/mach-zynq/headsmp.S
@@ -9,14 +9,15 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
+.globl zynq_secondary_trampoline_jump
+.globl zynq_secondary_trampoline_end
+
 ENTRY(zynq_secondary_trampoline)
 	ldr	r0, [pc]
 	bx	r0
-.globl zynq_secondary_trampoline_jump
 zynq_secondary_trampoline_jump:
 	/* Space for jumping address */
 	.word	/* cpu 1 */
-.globl zynq_secondary_trampoline_end
 zynq_secondary_trampoline_end:
 ENDPROC(zynq_secondary_trampoline)
 
-- 
1.8.4.1

[PATCH 6/6] arm: zynq: headsmp: Move .glbl out of actual code

[Soren Brinkmann]

Move the .glbl lines exporting symbols to the top of the file and out of
the actual code, in order to make the code more readable.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
 arch/arm/mach-zynq/headsmp.S | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-zynq/headsmp.S b/arch/arm/mach-zynq/headsmp.S
index 57a32869f0aa..12d1b40c7d78 100644
--- a/arch/arm/mach-zynq/headsmp.S
+++ b/arch/arm/mach-zynq/headsmp.S
@@ -9,14 +9,15 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
+.globl zynq_secondary_trampoline_jump
+.globl zynq_secondary_trampoline_end
+
 ENTRY(zynq_secondary_trampoline)
 	ldr	r0, [pc]
 	bx	r0
-.globl zynq_secondary_trampoline_jump
 zynq_secondary_trampoline_jump:
 	/* Space for jumping address */
 	.word	/* cpu 1 */
-.globl zynq_secondary_trampoline_end
 zynq_secondary_trampoline_end:
 ENDPROC(zynq_secondary_trampoline)
 
-- 
1.8.4.1

[PATCH 6/6] arm: zynq: headsmp: Move .glbl out of actual code

[Michal Simek]

On 10/31/2013 05:10 PM, Soren Brinkmann wrote:
> Move the .glbl lines exporting symbols to the top of the file and out of
> the actual code, in order to make the code more readable.
> 
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> ---
>  arch/arm/mach-zynq/headsmp.S | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-zynq/headsmp.S b/arch/arm/mach-zynq/headsmp.S
> index 57a32869f0aa..12d1b40c7d78 100644
> --- a/arch/arm/mach-zynq/headsmp.S
> +++ b/arch/arm/mach-zynq/headsmp.S
> @@ -9,14 +9,15 @@
>  #include <linux/linkage.h>
>  #include <linux/init.h>
>  
> +.globl zynq_secondary_trampoline_jump
> +.globl zynq_secondary_trampoline_end
> +
>  ENTRY(zynq_secondary_trampoline)
>  	ldr	r0, [pc]
>  	bx	r0
> -.globl zynq_secondary_trampoline_jump
>  zynq_secondary_trampoline_jump:
>  	/* Space for jumping address */
>  	.word	/* cpu 1 */
> -.globl zynq_secondary_trampoline_end
>  zynq_secondary_trampoline_end:
>  ENDPROC(zynq_secondary_trampoline)
>  

I don't want this one.
I have applied 1-5 to zynq/cleanup branch.

Thanks,
Michal



-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131106/b15b0ad0/attachment.sig>

Re: [PATCH 6/6] arm: zynq: headsmp: Move .glbl out of actual code

[Michal Simek]

[-- Attachment #1: Type: text/plain, Size: 1453 bytes --]

On 10/31/2013 05:10 PM, Soren Brinkmann wrote:
> Move the .glbl lines exporting symbols to the top of the file and out of
> the actual code, in order to make the code more readable.
> 
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> ---
>  arch/arm/mach-zynq/headsmp.S | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-zynq/headsmp.S b/arch/arm/mach-zynq/headsmp.S
> index 57a32869f0aa..12d1b40c7d78 100644
> --- a/arch/arm/mach-zynq/headsmp.S
> +++ b/arch/arm/mach-zynq/headsmp.S
> @@ -9,14 +9,15 @@
>  #include <linux/linkage.h>
>  #include <linux/init.h>
>  
> +.globl zynq_secondary_trampoline_jump
> +.globl zynq_secondary_trampoline_end
> +
>  ENTRY(zynq_secondary_trampoline)
>  	ldr	r0, [pc]
>  	bx	r0
> -.globl zynq_secondary_trampoline_jump
>  zynq_secondary_trampoline_jump:
>  	/* Space for jumping address */
>  	.word	/* cpu 1 */
> -.globl zynq_secondary_trampoline_end
>  zynq_secondary_trampoline_end:
>  ENDPROC(zynq_secondary_trampoline)
>  

I don't want this one.
I have applied 1-5 to zynq/cleanup branch.

Thanks,
Michal



-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 263 bytes --]

[PATCH 6/6] arm: zynq: headsmp: Move .glbl out of actual code

[Sören Brinkmann]

On Wed, Nov 06, 2013 at 08:46:37AM +0100, Michal Simek wrote:
> On 10/31/2013 05:10 PM, Soren Brinkmann wrote:
> > Move the .glbl lines exporting symbols to the top of the file and out of
> > the actual code, in order to make the code more readable.
> > 
> > Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> > ---
> >  arch/arm/mach-zynq/headsmp.S | 5 +++--
> >  1 file changed, 3 insertions(+), 2 deletions(-)
> > 
> > diff --git a/arch/arm/mach-zynq/headsmp.S b/arch/arm/mach-zynq/headsmp.S
> > index 57a32869f0aa..12d1b40c7d78 100644
> > --- a/arch/arm/mach-zynq/headsmp.S
> > +++ b/arch/arm/mach-zynq/headsmp.S
> > @@ -9,14 +9,15 @@
> >  #include <linux/linkage.h>
> >  #include <linux/init.h>
> >  
> > +.globl zynq_secondary_trampoline_jump
> > +.globl zynq_secondary_trampoline_end
> > +
> >  ENTRY(zynq_secondary_trampoline)
> >  	ldr	r0, [pc]
> >  	bx	r0
> > -.globl zynq_secondary_trampoline_jump
> >  zynq_secondary_trampoline_jump:
> >  	/* Space for jumping address */
> >  	.word	/* cpu 1 */
> > -.globl zynq_secondary_trampoline_end
> >  zynq_secondary_trampoline_end:
> >  ENDPROC(zynq_secondary_trampoline)
> >  
> 
> I don't want this one.
> I have applied 1-5 to zynq/cleanup branch.
Up to you. But having these .global statements in the middle of actual
code does not help reading the code. And IMHO, they don't belong there.

	S?ren

Re: [PATCH 6/6] arm: zynq: headsmp: Move .glbl out of actual code

[Sören Brinkmann]

On Wed, Nov 06, 2013 at 08:46:37AM +0100, Michal Simek wrote:
> On 10/31/2013 05:10 PM, Soren Brinkmann wrote:
> > Move the .glbl lines exporting symbols to the top of the file and out of
> > the actual code, in order to make the code more readable.
> > 
> > Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> > ---
> >  arch/arm/mach-zynq/headsmp.S | 5 +++--
> >  1 file changed, 3 insertions(+), 2 deletions(-)
> > 
> > diff --git a/arch/arm/mach-zynq/headsmp.S b/arch/arm/mach-zynq/headsmp.S
> > index 57a32869f0aa..12d1b40c7d78 100644
> > --- a/arch/arm/mach-zynq/headsmp.S
> > +++ b/arch/arm/mach-zynq/headsmp.S
> > @@ -9,14 +9,15 @@
> >  #include <linux/linkage.h>
> >  #include <linux/init.h>
> >  
> > +.globl zynq_secondary_trampoline_jump
> > +.globl zynq_secondary_trampoline_end
> > +
> >  ENTRY(zynq_secondary_trampoline)
> >  	ldr	r0, [pc]
> >  	bx	r0
> > -.globl zynq_secondary_trampoline_jump
> >  zynq_secondary_trampoline_jump:
> >  	/* Space for jumping address */
> >  	.word	/* cpu 1 */
> > -.globl zynq_secondary_trampoline_end
> >  zynq_secondary_trampoline_end:
> >  ENDPROC(zynq_secondary_trampoline)
> >  
> 
> I don't want this one.
> I have applied 1-5 to zynq/cleanup branch.
Up to you. But having these .global statements in the middle of actual
code does not help reading the code. And IMHO, they don't belong there.

	Sören