All of lore.kernel.org
 help / color / mirror / Atom feed
From: "ivan.khoronzhuk" <ivan.khoronzhuk@ti.com>
To: Santosh Shilimkar <santosh.shilimkar@ti.com>, <wim@iguana.be>,
	<nsekhar@ti.com>, <linux-watchdog@vger.kernel.org>,
	<devicetree@vger.kernel.org>
Cc: <grant.likely@linaro.org>, <rob.herring@calxeda.com>,
	<pawel.moll@arm.com>, <mark.rutland@arm.com>,
	<swarren@wwwdotorg.org>, <galak@kernel.crashing.org>,
	<ijc+devicetree@hellion.org.uk>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>
Subject: Fwd: [PATCH 0/8] Update Davinci watchdog driver
Date: Wed, 6 Nov 2013 13:30:18 +0200	[thread overview]
Message-ID: <527A284A.8000901@ti.com> (raw)
In-Reply-To: <1383680783-12114-1-git-send-email-ivan.khoronzhuk@ti.com>

These patches are intended to update Davinci watchdog to use WDT core
and reuse driver for keystone arch, because Keystone uses the similar
IP like Davinci.

See Documentation:
Davinci DM646x - http://www.ti.com/lit/ug/spruer5b/spruer5b.pdf
Keystone - http://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf

Also:
 - improved to support GET_TIMELEFT and GET_STATUS options.
 - added "clocks" and "timeout-sec" properties to DT.

Based on
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git
keystone/master

TO:
Santosh Shilimkar <santosh.shilimkar@ti.com> (maintainer: TI KEYSTONE MACHIN...)
Wim Van Sebroeck <wim@iguana.be> (maintainer:WATCHDOG DEVICE D...)
Sekhar Nori <nsekhar@ti.com> (supporter:TI DAVINCI MACHIN...)
linux-watchdog@vger.kernel.org (open list:WATCHDOG DEVICE D...)
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND...)

CC:
Grant Likely <grant.likely@linaro.org> (maintainer:OPEN FIRMWARE AND...)
Rob Herring <rob.herring@calxeda.com> (maintainer:OPEN FIRMWARE AND...)
Pawel Moll <pawel.moll@arm.com> (maintainer:OPEN FIRMWARE AND...)
Mark Rutland <mark.rutland@arm.com> (maintainer:OPEN FIRMWARE AND...)
Stephen Warren <swarren@wwwdotorg.org> (maintainer:OPEN FIRMWARE AND...)
Kumar Gala <galak@kernel.crashing.org>
Ian Campbell <ijc+devicetree@hellion.org.uk> (maintainer:OPEN FIRMWARE AND...)
linux-kernel@vger.kernel.org (open list)
linux-arm-kernel@lists.infradead.org (moderated list:ARM SUB-ARCHITECT...)

Ivan Khoronzhuk (8):
  watchdog: davinci: change driver to use WDT core
  watchdog: davinci: use davinci_wdt_device structure to hold device
    data
  watchdog: davinci: add GET_TIMELEFT option support
  watchdog: davinci: add GET_STATUS option support
  watchdog: davinci: add "timeout-sec" property
  watchdog: davinci: reuse driver for keystone arch
  watchdog: davinci: add "clocks" property
  arm: dts: keystone: add watchdog entry

 .../devicetree/bindings/watchdog/davinci-wdt.txt   |   21 +-
 arch/arm/boot/dts/keystone.dts                     |    6 +
 drivers/watchdog/Kconfig                           |    5 +-
 drivers/watchdog/davinci_wdt.c                     |  234 ++++++++++----------
 4 files changed, 139 insertions(+), 127 deletions(-)

-- 
1.7.9.5




WARNING: multiple messages have this Message-ID (diff)
From: ivan.khoronzhuk@ti.com (ivan.khoronzhuk)
To: linux-arm-kernel@lists.infradead.org
Subject: Fwd: [PATCH 0/8] Update Davinci watchdog driver
Date: Wed, 6 Nov 2013 13:30:18 +0200	[thread overview]
Message-ID: <527A284A.8000901@ti.com> (raw)
In-Reply-To: <1383680783-12114-1-git-send-email-ivan.khoronzhuk@ti.com>

These patches are intended to update Davinci watchdog to use WDT core
and reuse driver for keystone arch, because Keystone uses the similar
IP like Davinci.

See Documentation:
Davinci DM646x - http://www.ti.com/lit/ug/spruer5b/spruer5b.pdf
Keystone - http://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf

Also:
 - improved to support GET_TIMELEFT and GET_STATUS options.
 - added "clocks" and "timeout-sec" properties to DT.

Based on
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git
keystone/master

TO:
Santosh Shilimkar <santosh.shilimkar@ti.com> (maintainer: TI KEYSTONE MACHIN...)
Wim Van Sebroeck <wim@iguana.be> (maintainer:WATCHDOG DEVICE D...)
Sekhar Nori <nsekhar@ti.com> (supporter:TI DAVINCI MACHIN...)
linux-watchdog at vger.kernel.org (open list:WATCHDOG DEVICE D...)
devicetree at vger.kernel.org (open list:OPEN FIRMWARE AND...)

CC:
Grant Likely <grant.likely@linaro.org> (maintainer:OPEN FIRMWARE AND...)
Rob Herring <rob.herring@calxeda.com> (maintainer:OPEN FIRMWARE AND...)
Pawel Moll <pawel.moll@arm.com> (maintainer:OPEN FIRMWARE AND...)
Mark Rutland <mark.rutland@arm.com> (maintainer:OPEN FIRMWARE AND...)
Stephen Warren <swarren@wwwdotorg.org> (maintainer:OPEN FIRMWARE AND...)
Kumar Gala <galak@kernel.crashing.org>
Ian Campbell <ijc+devicetree@hellion.org.uk> (maintainer:OPEN FIRMWARE AND...)
linux-kernel at vger.kernel.org (open list)
linux-arm-kernel at lists.infradead.org (moderated list:ARM SUB-ARCHITECT...)

Ivan Khoronzhuk (8):
  watchdog: davinci: change driver to use WDT core
  watchdog: davinci: use davinci_wdt_device structure to hold device
    data
  watchdog: davinci: add GET_TIMELEFT option support
  watchdog: davinci: add GET_STATUS option support
  watchdog: davinci: add "timeout-sec" property
  watchdog: davinci: reuse driver for keystone arch
  watchdog: davinci: add "clocks" property
  arm: dts: keystone: add watchdog entry

 .../devicetree/bindings/watchdog/davinci-wdt.txt   |   21 +-
 arch/arm/boot/dts/keystone.dts                     |    6 +
 drivers/watchdog/Kconfig                           |    5 +-
 drivers/watchdog/davinci_wdt.c                     |  234 ++++++++++----------
 4 files changed, 139 insertions(+), 127 deletions(-)

-- 
1.7.9.5

WARNING: multiple messages have this Message-ID (diff)
From: "ivan.khoronzhuk" <ivan.khoronzhuk-l0cyMroinI0@public.gmane.org>
To: Santosh Shilimkar
	<santosh.shilimkar-l0cyMroinI0@public.gmane.org>,
	wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org,
	nsekhar-l0cyMroinI0@public.gmane.org,
	linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
	rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org,
	pawel.moll-5wv7dgnIgG8@public.gmane.org,
	mark.rutland-5wv7dgnIgG8@public.gmane.org,
	swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org,
	galak-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org,
	ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Fwd: [PATCH 0/8] Update Davinci watchdog driver
Date: Wed, 6 Nov 2013 13:30:18 +0200	[thread overview]
Message-ID: <527A284A.8000901@ti.com> (raw)
In-Reply-To: <1383680783-12114-1-git-send-email-ivan.khoronzhuk-l0cyMroinI0@public.gmane.org>

These patches are intended to update Davinci watchdog to use WDT core
and reuse driver for keystone arch, because Keystone uses the similar
IP like Davinci.

See Documentation:
Davinci DM646x - http://www.ti.com/lit/ug/spruer5b/spruer5b.pdf
Keystone - http://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf

Also:
 - improved to support GET_TIMELEFT and GET_STATUS options.
 - added "clocks" and "timeout-sec" properties to DT.

Based on
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git
keystone/master

TO:
Santosh Shilimkar <santosh.shilimkar-l0cyMroinI0@public.gmane.org> (maintainer: TI KEYSTONE MACHIN...)
Wim Van Sebroeck <wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org> (maintainer:WATCHDOG DEVICE D...)
Sekhar Nori <nsekhar-l0cyMroinI0@public.gmane.org> (supporter:TI DAVINCI MACHIN...)
linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org (open list:WATCHDOG DEVICE D...)
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org (open list:OPEN FIRMWARE AND...)

CC:
Grant Likely <grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> (maintainer:OPEN FIRMWARE AND...)
Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org> (maintainer:OPEN FIRMWARE AND...)
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org> (maintainer:OPEN FIRMWARE AND...)
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org> (maintainer:OPEN FIRMWARE AND...)
Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org> (maintainer:OPEN FIRMWARE AND...)
Kumar Gala <galak-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org>
Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org> (maintainer:OPEN FIRMWARE AND...)
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org (open list)
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org (moderated list:ARM SUB-ARCHITECT...)

Ivan Khoronzhuk (8):
  watchdog: davinci: change driver to use WDT core
  watchdog: davinci: use davinci_wdt_device structure to hold device
    data
  watchdog: davinci: add GET_TIMELEFT option support
  watchdog: davinci: add GET_STATUS option support
  watchdog: davinci: add "timeout-sec" property
  watchdog: davinci: reuse driver for keystone arch
  watchdog: davinci: add "clocks" property
  arm: dts: keystone: add watchdog entry

 .../devicetree/bindings/watchdog/davinci-wdt.txt   |   21 +-
 arch/arm/boot/dts/keystone.dts                     |    6 +
 drivers/watchdog/Kconfig                           |    5 +-
 drivers/watchdog/davinci_wdt.c                     |  234 ++++++++++----------
 4 files changed, 139 insertions(+), 127 deletions(-)

-- 
1.7.9.5



--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

       reply	other threads:[~2013-11-06 11:31 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1383680783-12114-1-git-send-email-ivan.khoronzhuk@ti.com>
2013-11-06 11:30 ` ivan.khoronzhuk [this message]
2013-11-06 11:30   ` Fwd: [PATCH 0/8] Update Davinci watchdog driver ivan.khoronzhuk
2013-11-06 11:30   ` ivan.khoronzhuk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=527A284A.8000901@ti.com \
    --to=ivan.khoronzhuk@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@kernel.crashing.org \
    --cc=grant.likely@linaro.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=nsekhar@ti.com \
    --cc=pawel.moll@arm.com \
    --cc=rob.herring@calxeda.com \
    --cc=santosh.shilimkar@ti.com \
    --cc=swarren@wwwdotorg.org \
    --cc=wim@iguana.be \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.