From: "ivan.khoronzhuk" <ivan.khoronzhuk@ti.com>
To: Santosh Shilimkar <santosh.shilimkar@ti.com>, <wim@iguana.be>,
<nsekhar@ti.com>, <linux-watchdog@vger.kernel.org>,
<devicetree@vger.kernel.org>
Cc: <grant.likely@linaro.org>, <rob.herring@calxeda.com>,
<pawel.moll@arm.com>, <mark.rutland@arm.com>,
<swarren@wwwdotorg.org>, <galak@kernel.crashing.org>,
<ijc+devicetree@hellion.org.uk>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Subject: Fwd: [PATCH 6/8] watchdog: davinci: reuse driver for keystone arch
Date: Wed, 6 Nov 2013 13:32:46 +0200 [thread overview]
Message-ID: <527A28DE.4030906@ti.com> (raw)
In-Reply-To: <1383680783-12114-7-git-send-email-ivan.khoronzhuk@ti.com>
The keystone arch use the same IP watchdog, so add "ti,keystone-wdt"
compatible and correct identity.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
---
.../devicetree/bindings/watchdog/davinci-wdt.txt | 11 +++++++++--
drivers/watchdog/Kconfig | 4 ++--
drivers/watchdog/davinci_wdt.c | 3 ++-
3 files changed, 13 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
index 1668b6e..fddced9 100644
--- a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
@@ -1,13 +1,20 @@
-DaVinci Watchdog Timer (WDT) Controller
+Texas Instruments DaVinci/Keystone Watchdog Timer (WDT) Controller
Required properties:
-- compatible : Should be "ti,davinci-wdt"
+
+- compatible: "ti,davinci-wdt"
+ "ti,keystone-wdt"
+
- reg : Should contain WDT registers location and length
Optional properties:
- timeout-sec: Contains the watchdog timeout in seconds
+Documentation:
+Davinci DM646x - http://www.ti.com/lit/ug/spruer5b/spruer5b.pdf
+Keystone - http://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf
+
Examples:
wdt: wdt@2320000 {
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 2c954b5..a4fe130 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -270,11 +270,11 @@ config IOP_WATCHDOG
config DAVINCI_WATCHDOG
tristate "DaVinci watchdog"
- depends on ARCH_DAVINCI
+ depends on ARCH_DAVINCI || ARCH_KEYSTONE
select WATCHDOG_CORE
help
Say Y here if to include support for the watchdog timer
- in the DaVinci DM644x/DM646x processors.
+ in the DaVinci DM644x/DM646x or Keystone processors.
To compile this driver as a module, choose M here: the
module will be called davinci_wdt.
diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c
index a371b2d..e51fd2e 100644
--- a/drivers/watchdog/davinci_wdt.c
+++ b/drivers/watchdog/davinci_wdt.c
@@ -158,7 +158,7 @@ static unsigned int davinci_wdt_status(struct watchdog_device *wdd)
static const struct watchdog_info davinci_wdt_info = {
.options = WDIOF_KEEPALIVEPING,
- .identity = "DaVinci Watchdog",
+ .identity = "DaVinci/Keystone Watchdog",
};
static const struct watchdog_ops davinci_wdt_ops = {
@@ -229,6 +229,7 @@ static int davinci_wdt_remove(struct platform_device *pdev)
static const struct of_device_id davinci_wdt_of_match[] = {
{ .compatible = "ti,davinci-wdt", },
+ { .compatible = "ti,keystone-wdt", },
{},
};
MODULE_DEVICE_TABLE(of, davinci_wdt_of_match);
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: ivan.khoronzhuk@ti.com (ivan.khoronzhuk)
To: linux-arm-kernel@lists.infradead.org
Subject: Fwd: [PATCH 6/8] watchdog: davinci: reuse driver for keystone arch
Date: Wed, 6 Nov 2013 13:32:46 +0200 [thread overview]
Message-ID: <527A28DE.4030906@ti.com> (raw)
In-Reply-To: <1383680783-12114-7-git-send-email-ivan.khoronzhuk@ti.com>
The keystone arch use the same IP watchdog, so add "ti,keystone-wdt"
compatible and correct identity.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
---
.../devicetree/bindings/watchdog/davinci-wdt.txt | 11 +++++++++--
drivers/watchdog/Kconfig | 4 ++--
drivers/watchdog/davinci_wdt.c | 3 ++-
3 files changed, 13 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
index 1668b6e..fddced9 100644
--- a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
@@ -1,13 +1,20 @@
-DaVinci Watchdog Timer (WDT) Controller
+Texas Instruments DaVinci/Keystone Watchdog Timer (WDT) Controller
Required properties:
-- compatible : Should be "ti,davinci-wdt"
+
+- compatible: "ti,davinci-wdt"
+ "ti,keystone-wdt"
+
- reg : Should contain WDT registers location and length
Optional properties:
- timeout-sec: Contains the watchdog timeout in seconds
+Documentation:
+Davinci DM646x - http://www.ti.com/lit/ug/spruer5b/spruer5b.pdf
+Keystone - http://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf
+
Examples:
wdt: wdt at 2320000 {
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 2c954b5..a4fe130 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -270,11 +270,11 @@ config IOP_WATCHDOG
config DAVINCI_WATCHDOG
tristate "DaVinci watchdog"
- depends on ARCH_DAVINCI
+ depends on ARCH_DAVINCI || ARCH_KEYSTONE
select WATCHDOG_CORE
help
Say Y here if to include support for the watchdog timer
- in the DaVinci DM644x/DM646x processors.
+ in the DaVinci DM644x/DM646x or Keystone processors.
To compile this driver as a module, choose M here: the
module will be called davinci_wdt.
diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c
index a371b2d..e51fd2e 100644
--- a/drivers/watchdog/davinci_wdt.c
+++ b/drivers/watchdog/davinci_wdt.c
@@ -158,7 +158,7 @@ static unsigned int davinci_wdt_status(struct watchdog_device *wdd)
static const struct watchdog_info davinci_wdt_info = {
.options = WDIOF_KEEPALIVEPING,
- .identity = "DaVinci Watchdog",
+ .identity = "DaVinci/Keystone Watchdog",
};
static const struct watchdog_ops davinci_wdt_ops = {
@@ -229,6 +229,7 @@ static int davinci_wdt_remove(struct platform_device *pdev)
static const struct of_device_id davinci_wdt_of_match[] = {
{ .compatible = "ti,davinci-wdt", },
+ { .compatible = "ti,keystone-wdt", },
{},
};
MODULE_DEVICE_TABLE(of, davinci_wdt_of_match);
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: "ivan.khoronzhuk" <ivan.khoronzhuk@ti.com>
To: Santosh Shilimkar <santosh.shilimkar@ti.com>,
wim@iguana.be, nsekhar@ti.com, linux-watchdog@vger.kernel.org,
devicetree@vger.kernel.org
Cc: grant.likely@linaro.org, rob.herring@calxeda.com,
pawel.moll@arm.com, mark.rutland@arm.com, swarren@wwwdotorg.org,
galak@kernel.crashing.org, ijc+devicetree@hellion.org.uk,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Fwd: [PATCH 6/8] watchdog: davinci: reuse driver for keystone arch
Date: Wed, 6 Nov 2013 13:32:46 +0200 [thread overview]
Message-ID: <527A28DE.4030906@ti.com> (raw)
In-Reply-To: <1383680783-12114-7-git-send-email-ivan.khoronzhuk@ti.com>
The keystone arch use the same IP watchdog, so add "ti,keystone-wdt"
compatible and correct identity.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
---
.../devicetree/bindings/watchdog/davinci-wdt.txt | 11 +++++++++--
drivers/watchdog/Kconfig | 4 ++--
drivers/watchdog/davinci_wdt.c | 3 ++-
3 files changed, 13 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
index 1668b6e..fddced9 100644
--- a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
@@ -1,13 +1,20 @@
-DaVinci Watchdog Timer (WDT) Controller
+Texas Instruments DaVinci/Keystone Watchdog Timer (WDT) Controller
Required properties:
-- compatible : Should be "ti,davinci-wdt"
+
+- compatible: "ti,davinci-wdt"
+ "ti,keystone-wdt"
+
- reg : Should contain WDT registers location and length
Optional properties:
- timeout-sec: Contains the watchdog timeout in seconds
+Documentation:
+Davinci DM646x - http://www.ti.com/lit/ug/spruer5b/spruer5b.pdf
+Keystone - http://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf
+
Examples:
wdt: wdt@2320000 {
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 2c954b5..a4fe130 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -270,11 +270,11 @@ config IOP_WATCHDOG
config DAVINCI_WATCHDOG
tristate "DaVinci watchdog"
- depends on ARCH_DAVINCI
+ depends on ARCH_DAVINCI || ARCH_KEYSTONE
select WATCHDOG_CORE
help
Say Y here if to include support for the watchdog timer
- in the DaVinci DM644x/DM646x processors.
+ in the DaVinci DM644x/DM646x or Keystone processors.
To compile this driver as a module, choose M here: the
module will be called davinci_wdt.
diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c
index a371b2d..e51fd2e 100644
--- a/drivers/watchdog/davinci_wdt.c
+++ b/drivers/watchdog/davinci_wdt.c
@@ -158,7 +158,7 @@ static unsigned int davinci_wdt_status(struct watchdog_device *wdd)
static const struct watchdog_info davinci_wdt_info = {
.options = WDIOF_KEEPALIVEPING,
- .identity = "DaVinci Watchdog",
+ .identity = "DaVinci/Keystone Watchdog",
};
static const struct watchdog_ops davinci_wdt_ops = {
@@ -229,6 +229,7 @@ static int davinci_wdt_remove(struct platform_device *pdev)
static const struct of_device_id davinci_wdt_of_match[] = {
{ .compatible = "ti,davinci-wdt", },
+ { .compatible = "ti,keystone-wdt", },
{},
};
MODULE_DEVICE_TABLE(of, davinci_wdt_of_match);
--
1.7.9.5
next parent reply other threads:[~2013-11-06 11:33 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1383680783-12114-7-git-send-email-ivan.khoronzhuk@ti.com>
2013-11-06 11:32 ` ivan.khoronzhuk [this message]
2013-11-06 11:32 ` Fwd: [PATCH 6/8] watchdog: davinci: reuse driver for keystone arch ivan.khoronzhuk
2013-11-06 11:32 ` ivan.khoronzhuk
2013-11-12 15:40 ` Santosh Shilimkar
2013-11-12 15:40 ` Santosh Shilimkar
2013-11-12 15:40 ` Santosh Shilimkar
2013-11-17 2:27 ` Guenter Roeck
2013-11-17 2:27 ` Guenter Roeck
2013-11-17 2:27 ` Guenter Roeck
2013-11-18 15:03 ` ivan.khoronzhuk
2013-11-18 15:03 ` ivan.khoronzhuk
2013-11-18 15:03 ` ivan.khoronzhuk
2013-11-23 18:02 ` Arnd Bergmann
2013-11-23 18:02 ` Arnd Bergmann
2013-11-23 18:02 ` Arnd Bergmann
2013-11-25 11:09 ` ivan.khoronzhuk
2013-11-25 11:09 ` ivan.khoronzhuk
2013-11-25 11:09 ` ivan.khoronzhuk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=527A28DE.4030906@ti.com \
--to=ivan.khoronzhuk@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@kernel.crashing.org \
--cc=grant.likely@linaro.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=nsekhar@ti.com \
--cc=pawel.moll@arm.com \
--cc=rob.herring@calxeda.com \
--cc=santosh.shilimkar@ti.com \
--cc=swarren@wwwdotorg.org \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.