* Fwd: [PATCH 5/8] watchdog: davinci: add "timeout-sec" property
[not found] <1383680783-12114-6-git-send-email-ivan.khoronzhuk@ti.com>
2013-11-06 11:32 ` ivan.khoronzhuk
@ 2013-11-06 11:32 ` ivan.khoronzhuk
0 siblings, 0 replies; 9+ messages in thread
From: ivan.khoronzhuk @ 2013-11-06 11:32 UTC (permalink / raw)
To: Santosh Shilimkar, wim, nsekhar, linux-watchdog, devicetree
Cc: grant.likely, rob.herring, pawel.moll, mark.rutland, swarren,
galak, ijc+devicetree, linux-kernel, linux-arm-kernel
Since Davinci WDT has been switched to use WDT core, it became able
to support timeout-sec property, so add it to it's binding description.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
---
.../devicetree/bindings/watchdog/davinci-wdt.txt | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
index 75558cc..1668b6e 100644
--- a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
@@ -4,9 +4,14 @@ Required properties:
- compatible : Should be "ti,davinci-wdt"
- reg : Should contain WDT registers location and length
+Optional properties:
+
+- timeout-sec: Contains the watchdog timeout in seconds
+
Examples:
wdt: wdt@2320000 {
compatible = "ti,davinci-wdt";
reg = <0x02320000 0x80>;
+ timeout-sec = <30>;
};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Fwd: [PATCH 5/8] watchdog: davinci: add "timeout-sec" property
@ 2013-11-06 11:32 ` ivan.khoronzhuk
0 siblings, 0 replies; 9+ messages in thread
From: ivan.khoronzhuk @ 2013-11-06 11:32 UTC (permalink / raw)
To: linux-arm-kernel
Since Davinci WDT has been switched to use WDT core, it became able
to support timeout-sec property, so add it to it's binding description.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
---
.../devicetree/bindings/watchdog/davinci-wdt.txt | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
index 75558cc..1668b6e 100644
--- a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
@@ -4,9 +4,14 @@ Required properties:
- compatible : Should be "ti,davinci-wdt"
- reg : Should contain WDT registers location and length
+Optional properties:
+
+- timeout-sec: Contains the watchdog timeout in seconds
+
Examples:
wdt: wdt at 2320000 {
compatible = "ti,davinci-wdt";
reg = <0x02320000 0x80>;
+ timeout-sec = <30>;
};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Fwd: [PATCH 5/8] watchdog: davinci: add "timeout-sec" property
@ 2013-11-06 11:32 ` ivan.khoronzhuk
0 siblings, 0 replies; 9+ messages in thread
From: ivan.khoronzhuk @ 2013-11-06 11:32 UTC (permalink / raw)
To: Santosh Shilimkar, wim, nsekhar, linux-watchdog, devicetree
Cc: grant.likely, rob.herring, pawel.moll, mark.rutland, swarren,
galak, ijc+devicetree, linux-kernel, linux-arm-kernel
Since Davinci WDT has been switched to use WDT core, it became able
to support timeout-sec property, so add it to it's binding description.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
---
.../devicetree/bindings/watchdog/davinci-wdt.txt | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
index 75558cc..1668b6e 100644
--- a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
@@ -4,9 +4,14 @@ Required properties:
- compatible : Should be "ti,davinci-wdt"
- reg : Should contain WDT registers location and length
+Optional properties:
+
+- timeout-sec: Contains the watchdog timeout in seconds
+
Examples:
wdt: wdt@2320000 {
compatible = "ti,davinci-wdt";
reg = <0x02320000 0x80>;
+ timeout-sec = <30>;
};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: Fwd: [PATCH 5/8] watchdog: davinci: add "timeout-sec" property
2013-11-06 11:32 ` ivan.khoronzhuk
(?)
@ 2013-11-12 15:38 ` Santosh Shilimkar
-1 siblings, 0 replies; 9+ messages in thread
From: Santosh Shilimkar @ 2013-11-12 15:38 UTC (permalink / raw)
To: ivan.khoronzhuk
Cc: wim, nsekhar, linux-watchdog, devicetree, grant.likely,
rob.herring, pawel.moll, mark.rutland, swarren, galak,
ijc+devicetree, linux-kernel, linux-arm-kernel
On Wednesday 06 November 2013 06:32 AM, ivan.khoronzhuk wrote:
> Since Davinci WDT has been switched to use WDT core, it became able
> to support timeout-sec property, so add it to it's binding description.
>
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
> ---
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Fwd: [PATCH 5/8] watchdog: davinci: add "timeout-sec" property
@ 2013-11-12 15:38 ` Santosh Shilimkar
0 siblings, 0 replies; 9+ messages in thread
From: Santosh Shilimkar @ 2013-11-12 15:38 UTC (permalink / raw)
To: linux-arm-kernel
On Wednesday 06 November 2013 06:32 AM, ivan.khoronzhuk wrote:
> Since Davinci WDT has been switched to use WDT core, it became able
> to support timeout-sec property, so add it to it's binding description.
>
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
> ---
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Fwd: [PATCH 5/8] watchdog: davinci: add "timeout-sec" property
@ 2013-11-12 15:38 ` Santosh Shilimkar
0 siblings, 0 replies; 9+ messages in thread
From: Santosh Shilimkar @ 2013-11-12 15:38 UTC (permalink / raw)
To: ivan.khoronzhuk
Cc: mark.rutland, devicetree, linux-watchdog, pawel.moll, swarren,
ijc+devicetree, nsekhar, galak, rob.herring, linux-kernel, wim,
grant.likely, linux-arm-kernel
On Wednesday 06 November 2013 06:32 AM, ivan.khoronzhuk wrote:
> Since Davinci WDT has been switched to use WDT core, it became able
> to support timeout-sec property, so add it to it's binding description.
>
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
> ---
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Fwd: [PATCH 5/8] watchdog: davinci: add "timeout-sec" property
2013-11-06 11:32 ` ivan.khoronzhuk
(?)
@ 2013-11-17 2:25 ` Guenter Roeck
-1 siblings, 0 replies; 9+ messages in thread
From: Guenter Roeck @ 2013-11-17 2:25 UTC (permalink / raw)
To: ivan.khoronzhuk, Santosh Shilimkar, wim, nsekhar, linux-watchdog,
devicetree
Cc: grant.likely, rob.herring, pawel.moll, mark.rutland, swarren,
galak, ijc+devicetree, linux-kernel, linux-arm-kernel
On 11/06/2013 03:32 AM, ivan.khoronzhuk wrote:
> Since Davinci WDT has been switched to use WDT core, it became able
> to support timeout-sec property, so add it to it's binding description.
>
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
> ---
> .../devicetree/bindings/watchdog/davinci-wdt.txt | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
> index 75558cc..1668b6e 100644
> --- a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
> +++ b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
> @@ -4,9 +4,14 @@ Required properties:
> - compatible : Should be "ti,davinci-wdt"
> - reg : Should contain WDT registers location and length
>
> +Optional properties:
> +
empty line not needed here (and inconsistent).
> +- timeout-sec: Contains the watchdog timeout in seconds
> +
Formatting is different to other bindings.
> Examples:
>
> wdt: wdt@2320000 {
> compatible = "ti,davinci-wdt";
> reg = <0x02320000 0x80>;
> + timeout-sec = <30>;
> };
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Fwd: [PATCH 5/8] watchdog: davinci: add "timeout-sec" property
@ 2013-11-17 2:25 ` Guenter Roeck
0 siblings, 0 replies; 9+ messages in thread
From: Guenter Roeck @ 2013-11-17 2:25 UTC (permalink / raw)
To: linux-arm-kernel
On 11/06/2013 03:32 AM, ivan.khoronzhuk wrote:
> Since Davinci WDT has been switched to use WDT core, it became able
> to support timeout-sec property, so add it to it's binding description.
>
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
> ---
> .../devicetree/bindings/watchdog/davinci-wdt.txt | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
> index 75558cc..1668b6e 100644
> --- a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
> +++ b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
> @@ -4,9 +4,14 @@ Required properties:
> - compatible : Should be "ti,davinci-wdt"
> - reg : Should contain WDT registers location and length
>
> +Optional properties:
> +
empty line not needed here (and inconsistent).
> +- timeout-sec: Contains the watchdog timeout in seconds
> +
Formatting is different to other bindings.
> Examples:
>
> wdt: wdt at 2320000 {
> compatible = "ti,davinci-wdt";
> reg = <0x02320000 0x80>;
> + timeout-sec = <30>;
> };
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Fwd: [PATCH 5/8] watchdog: davinci: add "timeout-sec" property
@ 2013-11-17 2:25 ` Guenter Roeck
0 siblings, 0 replies; 9+ messages in thread
From: Guenter Roeck @ 2013-11-17 2:25 UTC (permalink / raw)
To: ivan.khoronzhuk, Santosh Shilimkar, wim-IQzOog9fTRqzQB+pC5nmwQ,
nsekhar-l0cyMroinI0, linux-watchdog-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: grant.likely-QSEj5FYQhm4dnm+yROfE0A,
rob.herring-bsGFqQB8/DxBDgjK7y7TUQ, pawel.moll-5wv7dgnIgG8,
mark.rutland-5wv7dgnIgG8, swarren-3lzwWm7+Weoh9ZMKESR00Q,
galak-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
On 11/06/2013 03:32 AM, ivan.khoronzhuk wrote:
> Since Davinci WDT has been switched to use WDT core, it became able
> to support timeout-sec property, so add it to it's binding description.
>
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk-l0cyMroinI0@public.gmane.org>
> ---
> .../devicetree/bindings/watchdog/davinci-wdt.txt | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
> index 75558cc..1668b6e 100644
> --- a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
> +++ b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
> @@ -4,9 +4,14 @@ Required properties:
> - compatible : Should be "ti,davinci-wdt"
> - reg : Should contain WDT registers location and length
>
> +Optional properties:
> +
empty line not needed here (and inconsistent).
> +- timeout-sec: Contains the watchdog timeout in seconds
> +
Formatting is different to other bindings.
> Examples:
>
> wdt: wdt@2320000 {
> compatible = "ti,davinci-wdt";
> reg = <0x02320000 0x80>;
> + timeout-sec = <30>;
> };
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2013-11-17 2:25 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1383680783-12114-6-git-send-email-ivan.khoronzhuk@ti.com>
2013-11-06 11:32 ` Fwd: [PATCH 5/8] watchdog: davinci: add "timeout-sec" property ivan.khoronzhuk
2013-11-06 11:32 ` ivan.khoronzhuk
2013-11-06 11:32 ` ivan.khoronzhuk
2013-11-12 15:38 ` Santosh Shilimkar
2013-11-12 15:38 ` Santosh Shilimkar
2013-11-12 15:38 ` Santosh Shilimkar
2013-11-17 2:25 ` Guenter Roeck
2013-11-17 2:25 ` Guenter Roeck
2013-11-17 2:25 ` Guenter Roeck
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.