Re: [PATCH v6 2/2] PWM: atmel-pwm: add device tree binding document

[Alexandre Belloni <alexandre.belloni@free-electrons.com>]

On 01/11/2013 16:00, Bo Shen wrote:
> Add atmel pwm driver device tree binding document
>
> Signed-off-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
>
> ---
> Changes in v6:
>   - New, split binding document as a separate patch
>
> Changes in v5: None
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
>
>  .../devicetree/bindings/pwm/atmel-pwm.txt          |   41 ++++++++++++++++++++
>  1 file changed, 41 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pwm/atmel-pwm.txt
>
> diff --git a/Documentation/devicetree/bindings/pwm/atmel-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-pwm.txt
> new file mode 100644
> index 0000000..1c1a5fa
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pwm/atmel-pwm.txt
> @@ -0,0 +1,41 @@
> +Atmel PWM controller
> +
> +Required properties:
> +  - compatible: should be one of:
> +    - "atmel,at91sam9rl-pwm"
> +    - "atmel,sama5d3-pwm"
> +  - reg: physical base address and length of the controller's registers
> +  - #pwm-cells: Should be 3. See pwm.txt in this directory for a
> +    description of the cells format
> +
> +Example:
> +
> +	pwm0: pwm@f8034000 {
> +		compatible = "atmel,at91sam9rl-pwm";
> +		reg = <0xf8034000 0x400>;
> +		#pwm-cells = <3>;
> +	};
> +
> +The following the pwm led based example:
> +
> +	pwm0: pwm@f8034000 {
> +		compatible = "atmel,at91sam9rl-pwm";
> +		reg = <0xf8034000 0x400>;
> +		#pwm-cells = <3>;
> +	};
> +
> +	pwdleds {
> +		compatible = "pwm-leds";
> +
> +		d1 {
> +			label = "d1";
> +			pwms = <&pwm0 3 5000 0>
> +			max-brightness = <255>;
> +		};
> +
> +		d2 {
> +			label = "d2";
> +			pwms = <&pwm0 1 5000 1>
> +			max-brightness = <255>;
> +		};
> +	};


-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com