From: Marco <koansoftware@gmail.com>
To: meta-freescale@yoctoproject.org
Subject: Re: fsl-image-gui not booting on a SABRE Platform for Smart Devices
Date: Fri, 15 Nov 2013 11:55:29 +0100 [thread overview]
Message-ID: <5285FDA1.1040803@gmail.com> (raw)
In-Reply-To: <CAL8zT=jRPPX0Gm5uOoNBstBSWEzd-z91vqio68f920SU163Bcg@mail.gmail.com>
Il 15/11/2013 10:19, Jean-Michel Hautbois ha scritto:
> Hello everybody !
>
> I have a SABRE Platform for Smart Devices, and I would like to try this
> platform using the Yocto project.
> I followed the instructions here :
> https://community.freescale.com/docs/DOC-93844
>
> I have modified the local.conf and here is my build configuration :
> BB_VERSION = "1.20.0"
> BUILD_SYS = "x86_64-linux"
> NATIVELSBSTRING = "Ubuntu-12.04"
> TARGET_SYS = "arm-poky-linux-gnueabi"
> MACHINE = "imx6qsabreauto"
> DISTRO = "poky"
> DISTRO_VERSION = "1.5"
> TUNE_FEATURES = "armv7a vfp neon callconvention-hard cortexa9"
> TARGET_FPU = "vfp-neon"
>
> I am on the dora branch.
>
> I used dd and flashed my SD card, using the
> fsl-image-gui-imx6qsabreauto.sdcard image generated.
>
> When booting, I don't have anything displayed. I only have the D3 LED
> freezed in red, and when I connect the uart to usb, I don't have any
> message.
> When I use the android image I have with the board, I have the console
> messages on uart, and the display is ok.
>
> Next, I switched to master branch, and selected the imx6dlsabreauto machine.
> I get an error on do_install for the linux-imx :
>
> ERROR: Function failed: do_install (log file is located at
> /home/vodalys/fsl-community-bsp/build/tmp/work/imx6dlsabreauto-poky-linux-gnueabi/linux-imx/3.0.35-r37.14/temp/log.do_install.31088)
> ERROR: Logfile of failure stored in:
> /home/vodalys/fsl-community-bsp/build/tmp/work/imx6dlsabreauto-poky-linux-gnueabi/linux-imx/3.0.35-r37.14/temp/log.do_install.31088
> Log data follows:
> | DEBUG: Executing python function package_get_auto_pr
> | DEBUG: Python function package_get_auto_pr finished
> | DEBUG: Executing shell function do_install
> | NOTE: make -j 8 DEPMOD=echo
> INSTALL_MOD_PATH=/home/vodalys/fsl-community-bsp/build/tmp/work/imx6dlsabreauto-poky-linux-gnueabi/linux-imx/3.0.35-r37.14/image
> modules_install
.snip.
>
> Thanks in advance for your help,
> Best Regards,
> JM
>
>
I suggest you to do not use the master branch.
Stay with dora.
Your shoud focus on the SD creation and your main aim must be to see
u-boot sending chars on the UART.
Which SD connector are you using?
How are the dip-switch settings?
On which connector is connected your LCD?
Cordiali Saluti / Kindest Regards / Mit freundlichen Grüßen
--
Marco Cavallini | KOAN sas | Bergamo - Italia
embedded and real-time software engineering
Phone:+39-035-255.235 - Fax:+39-178-22.39.748
http://www.KoanSoftware.com
prev parent reply other threads:[~2013-11-15 10:55 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-15 9:19 fsl-image-gui not booting on a SABRE Platform for Smart Devices Jean-Michel Hautbois
2013-11-15 10:55 ` Marco [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5285FDA1.1040803@gmail.com \
--to=koansoftware@gmail.com \
--cc=meta-freescale@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.