* fsl-image-gui not booting on a SABRE Platform for Smart Devices
@ 2013-11-15 9:19 Jean-Michel Hautbois
2013-11-15 10:55 ` Marco
0 siblings, 1 reply; 2+ messages in thread
From: Jean-Michel Hautbois @ 2013-11-15 9:19 UTC (permalink / raw)
To: meta-freescale
[-- Attachment #1: Type: text/plain, Size: 7979 bytes --]
Hello everybody !
I have a SABRE Platform for Smart Devices, and I would like to try this
platform using the Yocto project.
I followed the instructions here :
https://community.freescale.com/docs/DOC-93844
I have modified the local.conf and here is my build configuration :
BB_VERSION = "1.20.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "Ubuntu-12.04"
TARGET_SYS = "arm-poky-linux-gnueabi"
MACHINE = "imx6qsabreauto"
DISTRO = "poky"
DISTRO_VERSION = "1.5"
TUNE_FEATURES = "armv7a vfp neon callconvention-hard cortexa9"
TARGET_FPU = "vfp-neon"
I am on the dora branch.
I used dd and flashed my SD card, using the
fsl-image-gui-imx6qsabreauto.sdcard image generated.
When booting, I don't have anything displayed. I only have the D3 LED
freezed in red, and when I connect the uart to usb, I don't have any
message.
When I use the android image I have with the board, I have the console
messages on uart, and the display is ok.
Next, I switched to master branch, and selected the imx6dlsabreauto machine.
I get an error on do_install for the linux-imx :
ERROR: Function failed: do_install (log file is located at
/home/vodalys/fsl-community-bsp/build/tmp/work/imx6dlsabreauto-poky-linux-gnueabi/linux-imx/3.0.35-r37.14/temp/log.do_install.31088)
ERROR: Logfile of failure stored in:
/home/vodalys/fsl-community-bsp/build/tmp/work/imx6dlsabreauto-poky-linux-gnueabi/linux-imx/3.0.35-r37.14/temp/log.do_install.31088
Log data follows:
| DEBUG: Executing python function package_get_auto_pr
| DEBUG: Python function package_get_auto_pr finished
| DEBUG: Executing shell function do_install
| NOTE: make -j 8 DEPMOD=echo
INSTALL_MOD_PATH=/home/vodalys/fsl-community-bsp/build/tmp/work/imx6dlsabreauto-poky-linux-gnueabi/linux-imx/3.0.35-r37.14/image
modules_install
| INSTALL drivers/gpu/drm/drm.ko
| INSTALL drivers/hid/hid-a4tech.ko
| INSTALL drivers/hid/hid-chicony.ko
| INSTALL drivers/hid/hid-cherry.ko
| INSTALL drivers/hid/hid-apple.ko
| INSTALL crypto/tcrypt.ko
| INSTALL drivers/gpu/drm/vivante/vivante.ko
| INSTALL drivers/hid/hid-belkin.ko
| INSTALL drivers/hid/hid-cypress.ko
| INSTALL drivers/hid/hid-ezkey.ko
| INSTALL drivers/hid/hid-gyration.ko
| INSTALL drivers/hid/hid-monterey.ko
| INSTALL drivers/hid/hid-logitech.ko
| INSTALL drivers/hid/hid-microsoft.ko
| INSTALL drivers/hid/hid-petalynx.ko
| INSTALL drivers/hid/hid-samsung.ko
| INSTALL drivers/hid/hid-pl.ko
| INSTALL drivers/hid/hid-sony.ko
| INSTALL drivers/hid/hid-sunplus.ko
| INSTALL drivers/i2c/algos/i2c-algo-bit.ko
| INSTALL drivers/media/video/gspca/gspca_main.ko
| INSTALL drivers/media/video/mxc/capture/adv7180_tvin.ko
| INSTALL drivers/media/video/mxc/capture/camera_sensor_clock.ko
| INSTALL drivers/media/video/mxc/capture/ipu_bg_overlay_sdc.ko
| INSTALL drivers/media/video/mxc/capture/ipu_csi_enc.ko
| INSTALL drivers/media/video/mxc/capture/ipu_fg_overlay_sdc.ko
| INSTALL drivers/media/video/mxc/capture/ipu_prp_enc.ko
| INSTALL drivers/media/video/mxc/capture/ipu_still.ko
| INSTALL drivers/media/video/mxc/capture/ov3640_camera.ko
| INSTALL drivers/media/video/mxc/capture/ov5640_camera.ko
| INSTALL drivers/media/video/mxc/capture/mxc_v4l2_capture.ko
| INSTALL drivers/media/video/mxc/capture/ov5640_camera_mipi.ko
| INSTALL drivers/media/video/mxc/capture/ov5642_camera.ko
| INSTALL drivers/media/video/uvc/uvcvideo.ko
| INSTALL drivers/media/video/mxc/capture/ov8820_camera_mipi.ko
| INSTALL drivers/net/wireless/ath/ath6kl/ath6kl.ko
| INSTALL drivers/misc/mxs-perfmon.ko
| INSTALL drivers/net/wireless/ath/ath.ko
| INSTALL drivers/mxc/mlb/mxc_mlb150.ko
| INSTALL drivers/scsi/scsi_wait_scan.ko
| INSTALL drivers/usb/gadget/g_audio.ko
| INSTALL drivers/usb/gadget/g_ether.ko
| INSTALL drivers/usb/gadget/g_file_storage.ko
| INSTALL drivers/usb/gadget/g_serial.ko
| INSTALL fs/autofs4/autofs4.ko
| INSTALL fs/nls/nls_utf8.ko
| INSTALL fs/nls/nls_ascii.ko
| INSTALL lib/crc-ccitt.ko
| DEPMOD 3.0.35-4.1.0+yocto+gbdde708
| Warning: you may need to install module-init-tools
| See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt
| 0 blocks
| NOTE: make -j 8 -C
/home/vodalys/fsl-community-bsp/build/tmp/work/imx6dlsabreauto-poky-linux-gnueabi/linux-imx/3.0.35-r37.14/image/usr/src/kernel
CC=arm-poky-linux-gnueabi-gcc -mno-thumb-interwork -marm
LD=arm-poky-linux-gnueabi-ld.bfd clean
| make: Entering directory
`/home/vodalys/fsl-community-bsp/build/tmp/work/imx6dlsabreauto-poky-linux-gnueabi/linux-imx/3.0.35-r37.14/image/usr/src/kernel'
| CLEAN .
| CLEAN arch/arm/kernel
| CLEAN firmware
| CLEAN kernel
| CLEAN lib
| CLEAN arch/arm/boot/compressed
| CLEAN arch/arm/boot
| CLEAN drivers/tty/vt
| CLEAN drivers/video/logo
| CLEAN vmlinux System.map
| make: Leaving directory
`/home/vodalys/fsl-community-bsp/build/tmp/work/imx6dlsabreauto-poky-linux-gnueabi/linux-imx/3.0.35-r37.14/image/usr/src/kernel'
| make: Entering directory
`/home/vodalys/fsl-community-bsp/build/tmp/work/imx6dlsabreauto-poky-linux-gnueabi/linux-imx/3.0.35-r37.14/image/usr/src/kernel'
| HOSTCC scripts/basic/fixdep
| HOSTCC scripts/kconfig/conf.o
| HOSTCC scripts/kconfig/zconf.tab.o
| HOSTLD scripts/kconfig/conf
| scripts/kconfig/conf --silentoldconfig Kconfig
| make: Leaving directory
`/home/vodalys/fsl-community-bsp/build/tmp/work/imx6dlsabreauto-poky-linux-gnueabi/linux-imx/3.0.35-r37.14/image/usr/src/kernel'
| make: Entering directory
`/home/vodalys/fsl-community-bsp/build/tmp/work/imx6dlsabreauto-poky-linux-gnueabi/linux-imx/3.0.35-r37.14/image/usr/src/kernel'
| CLEAN scripts/basic
| CLEAN scripts/genksyms
| CLEAN scripts/kconfig
| CLEAN scripts/mod
| CLEAN scripts
| make: Leaving directory
`/home/vodalys/fsl-community-bsp/build/tmp/work/imx6dlsabreauto-poky-linux-gnueabi/linux-imx/3.0.35-r37.14/image/usr/src/kernel'
| cp: `include/generated/asm-offsets.h' and
`/home/vodalys/fsl-community-bsp/build/tmp/work/imx6dlsabreauto-poky-linux-gnueabi/linux-imx/3.0.35-r37.14/image/usr/src/kernel/include/generated/asm-offsets.h'
are the same file
| cp: `include/generated/bounds.h' and
`/home/vodalys/fsl-community-bsp/build/tmp/work/imx6dlsabreauto-poky-linux-gnueabi/linux-imx/3.0.35-r37.14/image/usr/src/kernel/include/generated/bounds.h'
are the same file
| cp: `include/generated/compile.h' and
`/home/vodalys/fsl-community-bsp/build/tmp/work/imx6dlsabreauto-poky-linux-gnueabi/linux-imx/3.0.35-r37.14/image/usr/src/kernel/include/generated/compile.h'
are the same file
| cp: `include/generated/mach-types.h' and
`/home/vodalys/fsl-community-bsp/build/tmp/work/imx6dlsabreauto-poky-linux-gnueabi/linux-imx/3.0.35-r37.14/image/usr/src/kernel/include/generated/mach-types.h'
are the same file
| cp: `include/generated/utsrelease.h' and
`/home/vodalys/fsl-community-bsp/build/tmp/work/imx6dlsabreauto-poky-linux-gnueabi/linux-imx/3.0.35-r37.14/image/usr/src/kernel/include/generated/utsrelease.h'
are the same file
| WARNING:
/home/vodalys/fsl-community-bsp/build/tmp/work/imx6dlsabreauto-poky-linux-gnueabi/linux-imx/3.0.35-r37.14/temp/run.do_install.31088:1
exit 1 from
| cp -r include/generated/asm-offsets.h include/generated/autoconf.h
include/generated/bounds.h include/generated/compile.h
include/generated/mach-types.h include/generated/utsrelease.h
$kerneldir/include/generated/
| ERROR: Function failed: do_install (log file is located at
/home/vodalys/fsl-community-bsp/build/tmp/work/imx6dlsabreauto-poky-linux-gnueabi/linux-imx/3.0.35-r37.14/temp/log.do_install.31088)
ERROR: Task 292
(/home/vodalys/fsl-community-bsp/sources/meta-fsl-arm/recipes-kernel/linux/
linux-imx_3.0.35.bb, do_install) failed with exit code '1'
Thanks in advance for your help,
Best Regards,
JM
[-- Attachment #2: Type: text/html, Size: 9103 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: fsl-image-gui not booting on a SABRE Platform for Smart Devices
2013-11-15 9:19 fsl-image-gui not booting on a SABRE Platform for Smart Devices Jean-Michel Hautbois
@ 2013-11-15 10:55 ` Marco
0 siblings, 0 replies; 2+ messages in thread
From: Marco @ 2013-11-15 10:55 UTC (permalink / raw)
To: meta-freescale
Il 15/11/2013 10:19, Jean-Michel Hautbois ha scritto:
> Hello everybody !
>
> I have a SABRE Platform for Smart Devices, and I would like to try this
> platform using the Yocto project.
> I followed the instructions here :
> https://community.freescale.com/docs/DOC-93844
>
> I have modified the local.conf and here is my build configuration :
> BB_VERSION = "1.20.0"
> BUILD_SYS = "x86_64-linux"
> NATIVELSBSTRING = "Ubuntu-12.04"
> TARGET_SYS = "arm-poky-linux-gnueabi"
> MACHINE = "imx6qsabreauto"
> DISTRO = "poky"
> DISTRO_VERSION = "1.5"
> TUNE_FEATURES = "armv7a vfp neon callconvention-hard cortexa9"
> TARGET_FPU = "vfp-neon"
>
> I am on the dora branch.
>
> I used dd and flashed my SD card, using the
> fsl-image-gui-imx6qsabreauto.sdcard image generated.
>
> When booting, I don't have anything displayed. I only have the D3 LED
> freezed in red, and when I connect the uart to usb, I don't have any
> message.
> When I use the android image I have with the board, I have the console
> messages on uart, and the display is ok.
>
> Next, I switched to master branch, and selected the imx6dlsabreauto machine.
> I get an error on do_install for the linux-imx :
>
> ERROR: Function failed: do_install (log file is located at
> /home/vodalys/fsl-community-bsp/build/tmp/work/imx6dlsabreauto-poky-linux-gnueabi/linux-imx/3.0.35-r37.14/temp/log.do_install.31088)
> ERROR: Logfile of failure stored in:
> /home/vodalys/fsl-community-bsp/build/tmp/work/imx6dlsabreauto-poky-linux-gnueabi/linux-imx/3.0.35-r37.14/temp/log.do_install.31088
> Log data follows:
> | DEBUG: Executing python function package_get_auto_pr
> | DEBUG: Python function package_get_auto_pr finished
> | DEBUG: Executing shell function do_install
> | NOTE: make -j 8 DEPMOD=echo
> INSTALL_MOD_PATH=/home/vodalys/fsl-community-bsp/build/tmp/work/imx6dlsabreauto-poky-linux-gnueabi/linux-imx/3.0.35-r37.14/image
> modules_install
.snip.
>
> Thanks in advance for your help,
> Best Regards,
> JM
>
>
I suggest you to do not use the master branch.
Stay with dora.
Your shoud focus on the SD creation and your main aim must be to see
u-boot sending chars on the UART.
Which SD connector are you using?
How are the dip-switch settings?
On which connector is connected your LCD?
Cordiali Saluti / Kindest Regards / Mit freundlichen Grüßen
--
Marco Cavallini | KOAN sas | Bergamo - Italia
embedded and real-time software engineering
Phone:+39-035-255.235 - Fax:+39-178-22.39.748
http://www.KoanSoftware.com
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-11-15 10:55 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-11-15 9:19 fsl-image-gui not booting on a SABRE Platform for Smart Devices Jean-Michel Hautbois
2013-11-15 10:55 ` Marco
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.