* [PATCH 1/2] net: emaclite: Remove unnecessary code that enables/disables interrupts on PONG buffers
@ 2013-11-28 7:29 ` Srikanth Thokala
0 siblings, 0 replies; 4+ messages in thread
From: Srikanth Thokala @ 2013-11-28 7:29 UTC (permalink / raw)
To: linux-arm-kernel
There are no specific interrupts for the PONG buffer on both
transmit and receive side, same interrupt is valid for both
buffers. So, this patch removes this code.
Signed-off-by: Srikanth Thokala <sthokal@xilinx.com>
---
drivers/net/ethernet/xilinx/xilinx_emaclite.c | 38 ---------------------------
1 file changed, 38 deletions(-)
diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index a7c02f4..3a693a1 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -164,26 +164,9 @@ static void xemaclite_enable_interrupts(struct net_local *drvdata)
__raw_writel(reg_data | XEL_TSR_XMIT_IE_MASK,
drvdata->base_addr + XEL_TSR_OFFSET);
- /* Enable the Tx interrupts for the second Buffer if
- * configured in HW */
- if (drvdata->tx_ping_pong != 0) {
- reg_data = __raw_readl(drvdata->base_addr +
- XEL_BUFFER_OFFSET + XEL_TSR_OFFSET);
- __raw_writel(reg_data | XEL_TSR_XMIT_IE_MASK,
- drvdata->base_addr + XEL_BUFFER_OFFSET +
- XEL_TSR_OFFSET);
- }
-
/* Enable the Rx interrupts for the first buffer */
__raw_writel(XEL_RSR_RECV_IE_MASK, drvdata->base_addr + XEL_RSR_OFFSET);
- /* Enable the Rx interrupts for the second Buffer if
- * configured in HW */
- if (drvdata->rx_ping_pong != 0) {
- __raw_writel(XEL_RSR_RECV_IE_MASK, drvdata->base_addr +
- XEL_BUFFER_OFFSET + XEL_RSR_OFFSET);
- }
-
/* Enable the Global Interrupt Enable */
__raw_writel(XEL_GIER_GIE_MASK, drvdata->base_addr + XEL_GIER_OFFSET);
}
@@ -207,31 +190,10 @@ static void xemaclite_disable_interrupts(struct net_local *drvdata)
__raw_writel(reg_data & (~XEL_TSR_XMIT_IE_MASK),
drvdata->base_addr + XEL_TSR_OFFSET);
- /* Disable the Tx interrupts for the second Buffer
- * if configured in HW */
- if (drvdata->tx_ping_pong != 0) {
- reg_data = __raw_readl(drvdata->base_addr + XEL_BUFFER_OFFSET +
- XEL_TSR_OFFSET);
- __raw_writel(reg_data & (~XEL_TSR_XMIT_IE_MASK),
- drvdata->base_addr + XEL_BUFFER_OFFSET +
- XEL_TSR_OFFSET);
- }
-
/* Disable the Rx interrupts for the first buffer */
reg_data = __raw_readl(drvdata->base_addr + XEL_RSR_OFFSET);
__raw_writel(reg_data & (~XEL_RSR_RECV_IE_MASK),
drvdata->base_addr + XEL_RSR_OFFSET);
-
- /* Disable the Rx interrupts for the second buffer
- * if configured in HW */
- if (drvdata->rx_ping_pong != 0) {
-
- reg_data = __raw_readl(drvdata->base_addr + XEL_BUFFER_OFFSET +
- XEL_RSR_OFFSET);
- __raw_writel(reg_data & (~XEL_RSR_RECV_IE_MASK),
- drvdata->base_addr + XEL_BUFFER_OFFSET +
- XEL_RSR_OFFSET);
- }
}
/**
--
1.8.2.GIT
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH 1/2] net: emaclite: Remove unnecessary code that enables/disables interrupts on PONG buffers
@ 2013-11-28 7:29 ` Srikanth Thokala
0 siblings, 0 replies; 4+ messages in thread
From: Srikanth Thokala @ 2013-11-28 7:29 UTC (permalink / raw)
To: netdev, linux-arm-kernel; +Cc: davem, Michal Simek, Srikanth Thokala
There are no specific interrupts for the PONG buffer on both
transmit and receive side, same interrupt is valid for both
buffers. So, this patch removes this code.
Signed-off-by: Srikanth Thokala <sthokal@xilinx.com>
---
drivers/net/ethernet/xilinx/xilinx_emaclite.c | 38 ---------------------------
1 file changed, 38 deletions(-)
diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index a7c02f4..3a693a1 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -164,26 +164,9 @@ static void xemaclite_enable_interrupts(struct net_local *drvdata)
__raw_writel(reg_data | XEL_TSR_XMIT_IE_MASK,
drvdata->base_addr + XEL_TSR_OFFSET);
- /* Enable the Tx interrupts for the second Buffer if
- * configured in HW */
- if (drvdata->tx_ping_pong != 0) {
- reg_data = __raw_readl(drvdata->base_addr +
- XEL_BUFFER_OFFSET + XEL_TSR_OFFSET);
- __raw_writel(reg_data | XEL_TSR_XMIT_IE_MASK,
- drvdata->base_addr + XEL_BUFFER_OFFSET +
- XEL_TSR_OFFSET);
- }
-
/* Enable the Rx interrupts for the first buffer */
__raw_writel(XEL_RSR_RECV_IE_MASK, drvdata->base_addr + XEL_RSR_OFFSET);
- /* Enable the Rx interrupts for the second Buffer if
- * configured in HW */
- if (drvdata->rx_ping_pong != 0) {
- __raw_writel(XEL_RSR_RECV_IE_MASK, drvdata->base_addr +
- XEL_BUFFER_OFFSET + XEL_RSR_OFFSET);
- }
-
/* Enable the Global Interrupt Enable */
__raw_writel(XEL_GIER_GIE_MASK, drvdata->base_addr + XEL_GIER_OFFSET);
}
@@ -207,31 +190,10 @@ static void xemaclite_disable_interrupts(struct net_local *drvdata)
__raw_writel(reg_data & (~XEL_TSR_XMIT_IE_MASK),
drvdata->base_addr + XEL_TSR_OFFSET);
- /* Disable the Tx interrupts for the second Buffer
- * if configured in HW */
- if (drvdata->tx_ping_pong != 0) {
- reg_data = __raw_readl(drvdata->base_addr + XEL_BUFFER_OFFSET +
- XEL_TSR_OFFSET);
- __raw_writel(reg_data & (~XEL_TSR_XMIT_IE_MASK),
- drvdata->base_addr + XEL_BUFFER_OFFSET +
- XEL_TSR_OFFSET);
- }
-
/* Disable the Rx interrupts for the first buffer */
reg_data = __raw_readl(drvdata->base_addr + XEL_RSR_OFFSET);
__raw_writel(reg_data & (~XEL_RSR_RECV_IE_MASK),
drvdata->base_addr + XEL_RSR_OFFSET);
-
- /* Disable the Rx interrupts for the second buffer
- * if configured in HW */
- if (drvdata->rx_ping_pong != 0) {
-
- reg_data = __raw_readl(drvdata->base_addr + XEL_BUFFER_OFFSET +
- XEL_RSR_OFFSET);
- __raw_writel(reg_data & (~XEL_RSR_RECV_IE_MASK),
- drvdata->base_addr + XEL_BUFFER_OFFSET +
- XEL_RSR_OFFSET);
- }
}
/**
--
1.8.2.GIT
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH 1/2] net: emaclite: Remove unnecessary code that enables/disables interrupts on PONG buffers
2013-11-28 7:29 ` Srikanth Thokala
@ 2013-12-02 11:20 ` Michal Simek
-1 siblings, 0 replies; 4+ messages in thread
From: Michal Simek @ 2013-12-02 11:20 UTC (permalink / raw)
To: linux-arm-kernel
On 11/28/2013 08:29 AM, Srikanth Thokala wrote:
> There are no specific interrupts for the PONG buffer on both
> transmit and receive side, same interrupt is valid for both
> buffers. So, this patch removes this code.
>
> Signed-off-by: Srikanth Thokala <sthokal@xilinx.com>
> ---
> drivers/net/ethernet/xilinx/xilinx_emaclite.c | 38 ---------------------------
> 1 file changed, 38 deletions(-)
Reviewed-by: Michal Simek <monstr@monstr.eu>
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131202/0e3ce709/attachment.sig>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 1/2] net: emaclite: Remove unnecessary code that enables/disables interrupts on PONG buffers
@ 2013-12-02 11:20 ` Michal Simek
0 siblings, 0 replies; 4+ messages in thread
From: Michal Simek @ 2013-12-02 11:20 UTC (permalink / raw)
To: Srikanth Thokala
Cc: netdev, Srikanth Thokala, davem, linux-arm-kernel, Michal Simek
[-- Attachment #1.1: Type: text/plain, Size: 785 bytes --]
On 11/28/2013 08:29 AM, Srikanth Thokala wrote:
> There are no specific interrupts for the PONG buffer on both
> transmit and receive side, same interrupt is valid for both
> buffers. So, this patch removes this code.
>
> Signed-off-by: Srikanth Thokala <sthokal@xilinx.com>
> ---
> drivers/net/ethernet/xilinx/xilinx_emaclite.c | 38 ---------------------------
> 1 file changed, 38 deletions(-)
Reviewed-by: Michal Simek <monstr@monstr.eu>
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 263 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-12-02 11:20 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-11-28 7:29 [PATCH 1/2] net: emaclite: Remove unnecessary code that enables/disables interrupts on PONG buffers Srikanth Thokala
2013-11-28 7:29 ` Srikanth Thokala
2013-12-02 11:20 ` Michal Simek
2013-12-02 11:20 ` Michal Simek
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.