* [PATCH 0/2] ASoC: sam9x5_wm8731: fix left right channel swap issue @ 2013-12-04 2:37 ` Bo Shen 0 siblings, 0 replies; 27+ messages in thread From: Bo Shen @ 2013-12-04 2:37 UTC (permalink / raw) To: broonie Cc: nicolas.ferre, richard.genoud, zql, linux-sound, alsa-devel, linux-arm-kernel, Bo Shen This patch series fix sam9x5 wm8731 playback left right channel swap issue However, sam9x5 and wm8731 only can work in DSP A mode while can not work in I2S mode. Bo Shen (2): ASoC: atmel_ssc_dai: add dai trigger ops ASoC: sam9x5_wm8731: change to work in DSP A mode sound/soc/atmel/atmel_ssc_dai.c | 30 +++++++++++++++++++++++++++++- sound/soc/atmel/sam9x5_wm8731.c | 2 +- 2 files changed, 30 insertions(+), 2 deletions(-) -- 1.7.9.5 ^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH 0/2] ASoC: sam9x5_wm8731: fix left right channel swap issue @ 2013-12-04 2:37 ` Bo Shen 0 siblings, 0 replies; 27+ messages in thread From: Bo Shen @ 2013-12-04 2:37 UTC (permalink / raw) To: linux-arm-kernel This patch series fix sam9x5 wm8731 playback left right channel swap issue However, sam9x5 and wm8731 only can work in DSP A mode while can not work in I2S mode. Bo Shen (2): ASoC: atmel_ssc_dai: add dai trigger ops ASoC: sam9x5_wm8731: change to work in DSP A mode sound/soc/atmel/atmel_ssc_dai.c | 30 +++++++++++++++++++++++++++++- sound/soc/atmel/sam9x5_wm8731.c | 2 +- 2 files changed, 30 insertions(+), 2 deletions(-) -- 1.7.9.5 ^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH 0/2] ASoC: sam9x5_wm8731: fix left right channel swap issue @ 2013-12-04 2:37 ` Bo Shen 0 siblings, 0 replies; 27+ messages in thread From: Bo Shen @ 2013-12-04 2:37 UTC (permalink / raw) To: broonie Cc: nicolas.ferre, richard.genoud, zql, linux-sound, alsa-devel, linux-arm-kernel, Bo Shen This patch series fix sam9x5 wm8731 playback left right channel swap issue However, sam9x5 and wm8731 only can work in DSP A mode while can not work in I2S mode. Bo Shen (2): ASoC: atmel_ssc_dai: add dai trigger ops ASoC: sam9x5_wm8731: change to work in DSP A mode sound/soc/atmel/atmel_ssc_dai.c | 30 +++++++++++++++++++++++++++++- sound/soc/atmel/sam9x5_wm8731.c | 2 +- 2 files changed, 30 insertions(+), 2 deletions(-) -- 1.7.9.5 ^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH 1/2] ASoC: atmel_ssc_dai: add dai trigger ops 2013-12-04 2:37 ` Bo Shen (?) @ 2013-12-04 2:37 ` Bo Shen -1 siblings, 0 replies; 27+ messages in thread From: Bo Shen @ 2013-12-04 2:37 UTC (permalink / raw) To: broonie Cc: zql, richard.genoud, nicolas.ferre, alsa-devel, linux-sound, Bo Shen, linux-arm-kernel According to the SSC specifiation, it should be enabled after DMA is enabled. So, add trigger operation to make sure the right sequence. Signed-off-by: Bo Shen <voice.shen@atmel.com> --- sound/soc/atmel/atmel_ssc_dai.c | 30 +++++++++++++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-) diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c index 8697ced..1ead3c9 100644 --- a/sound/soc/atmel/atmel_ssc_dai.c +++ b/sound/soc/atmel/atmel_ssc_dai.c @@ -648,7 +648,7 @@ static int atmel_ssc_prepare(struct snd_pcm_substream *substream, dma_params = ssc_p->dma_params[dir]; - ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable); + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable); ssc_writel(ssc_p->ssc->regs, IDR, dma_params->mask->ssc_error); pr_debug("%s enabled SSC_SR=0x%08x\n", @@ -657,6 +657,33 @@ static int atmel_ssc_prepare(struct snd_pcm_substream *substream, return 0; } +static int atmel_ssc_trigger(struct snd_pcm_substream *substream, + int cmd, struct snd_soc_dai *dai) +{ + struct atmel_ssc_info *ssc_p = &ssc_info[dai->id]; + struct atmel_pcm_dma_params *dma_params; + int dir; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir = 0; + else + dir = 1; + + dma_params = ssc_p->dma_params[dir]; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable); + break; + default: + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable); + break; + } + + return 0; +} #ifdef CONFIG_PM static int atmel_ssc_suspend(struct snd_soc_dai *cpu_dai) @@ -731,6 +758,7 @@ static const struct snd_soc_dai_ops atmel_ssc_dai_ops = { .startup = atmel_ssc_startup, .shutdown = atmel_ssc_shutdown, .prepare = atmel_ssc_prepare, + .trigger = atmel_ssc_trigger, .hw_params = atmel_ssc_hw_params, .set_fmt = atmel_ssc_set_dai_fmt, .set_clkdiv = atmel_ssc_set_dai_clkdiv, -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 1/2] ASoC: atmel_ssc_dai: add dai trigger ops @ 2013-12-04 2:37 ` Bo Shen 0 siblings, 0 replies; 27+ messages in thread From: Bo Shen @ 2013-12-04 2:37 UTC (permalink / raw) To: linux-arm-kernel According to the SSC specifiation, it should be enabled after DMA is enabled. So, add trigger operation to make sure the right sequence. Signed-off-by: Bo Shen <voice.shen@atmel.com> --- sound/soc/atmel/atmel_ssc_dai.c | 30 +++++++++++++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-) diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c index 8697ced..1ead3c9 100644 --- a/sound/soc/atmel/atmel_ssc_dai.c +++ b/sound/soc/atmel/atmel_ssc_dai.c @@ -648,7 +648,7 @@ static int atmel_ssc_prepare(struct snd_pcm_substream *substream, dma_params = ssc_p->dma_params[dir]; - ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable); + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable); ssc_writel(ssc_p->ssc->regs, IDR, dma_params->mask->ssc_error); pr_debug("%s enabled SSC_SR=0x%08x\n", @@ -657,6 +657,33 @@ static int atmel_ssc_prepare(struct snd_pcm_substream *substream, return 0; } +static int atmel_ssc_trigger(struct snd_pcm_substream *substream, + int cmd, struct snd_soc_dai *dai) +{ + struct atmel_ssc_info *ssc_p = &ssc_info[dai->id]; + struct atmel_pcm_dma_params *dma_params; + int dir; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir = 0; + else + dir = 1; + + dma_params = ssc_p->dma_params[dir]; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable); + break; + default: + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable); + break; + } + + return 0; +} #ifdef CONFIG_PM static int atmel_ssc_suspend(struct snd_soc_dai *cpu_dai) @@ -731,6 +758,7 @@ static const struct snd_soc_dai_ops atmel_ssc_dai_ops = { .startup = atmel_ssc_startup, .shutdown = atmel_ssc_shutdown, .prepare = atmel_ssc_prepare, + .trigger = atmel_ssc_trigger, .hw_params = atmel_ssc_hw_params, .set_fmt = atmel_ssc_set_dai_fmt, .set_clkdiv = atmel_ssc_set_dai_clkdiv, -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 1/2] ASoC: atmel_ssc_dai: add dai trigger ops @ 2013-12-04 2:37 ` Bo Shen 0 siblings, 0 replies; 27+ messages in thread From: Bo Shen @ 2013-12-04 2:37 UTC (permalink / raw) To: broonie Cc: zql, richard.genoud, nicolas.ferre, alsa-devel, linux-sound, Bo Shen, linux-arm-kernel According to the SSC specifiation, it should be enabled after DMA is enabled. So, add trigger operation to make sure the right sequence. Signed-off-by: Bo Shen <voice.shen@atmel.com> --- sound/soc/atmel/atmel_ssc_dai.c | 30 +++++++++++++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-) diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c index 8697ced..1ead3c9 100644 --- a/sound/soc/atmel/atmel_ssc_dai.c +++ b/sound/soc/atmel/atmel_ssc_dai.c @@ -648,7 +648,7 @@ static int atmel_ssc_prepare(struct snd_pcm_substream *substream, dma_params = ssc_p->dma_params[dir]; - ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable); + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable); ssc_writel(ssc_p->ssc->regs, IDR, dma_params->mask->ssc_error); pr_debug("%s enabled SSC_SR=0x%08x\n", @@ -657,6 +657,33 @@ static int atmel_ssc_prepare(struct snd_pcm_substream *substream, return 0; } +static int atmel_ssc_trigger(struct snd_pcm_substream *substream, + int cmd, struct snd_soc_dai *dai) +{ + struct atmel_ssc_info *ssc_p = &ssc_info[dai->id]; + struct atmel_pcm_dma_params *dma_params; + int dir; + + if (substream->stream = SNDRV_PCM_STREAM_PLAYBACK) + dir = 0; + else + dir = 1; + + dma_params = ssc_p->dma_params[dir]; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable); + break; + default: + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable); + break; + } + + return 0; +} #ifdef CONFIG_PM static int atmel_ssc_suspend(struct snd_soc_dai *cpu_dai) @@ -731,6 +758,7 @@ static const struct snd_soc_dai_ops atmel_ssc_dai_ops = { .startup = atmel_ssc_startup, .shutdown = atmel_ssc_shutdown, .prepare = atmel_ssc_prepare, + .trigger = atmel_ssc_trigger, .hw_params = atmel_ssc_hw_params, .set_fmt = atmel_ssc_set_dai_fmt, .set_clkdiv = atmel_ssc_set_dai_clkdiv, -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* Re: [PATCH 1/2] ASoC: atmel_ssc_dai: add dai trigger ops 2013-12-04 2:37 ` Bo Shen (?) @ 2013-12-04 11:38 ` Richard Genoud -1 siblings, 0 replies; 27+ messages in thread From: Richard Genoud @ 2013-12-04 11:38 UTC (permalink / raw) To: Bo Shen Cc: broonie, nicolas.ferre, zql, linux-sound, alsa-devel, linux-arm-kernel On 04/12/2013 03:37, Bo Shen wrote: > According to the SSC specifiation, it should be enabled after DMA is > enabled. So, add trigger operation to make sure the right sequence. > > Signed-off-by: Bo Shen <voice.shen@atmel.com> > --- > sound/soc/atmel/atmel_ssc_dai.c | 30 +++++++++++++++++++++++++++++- > 1 file changed, 29 insertions(+), 1 deletion(-) > > diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c > index 8697ced..1ead3c9 100644 > --- a/sound/soc/atmel/atmel_ssc_dai.c > +++ b/sound/soc/atmel/atmel_ssc_dai.c > @@ -648,7 +648,7 @@ static int atmel_ssc_prepare(struct snd_pcm_substream *substream, > > dma_params = ssc_p->dma_params[dir]; > > - ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable); > + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable); > ssc_writel(ssc_p->ssc->regs, IDR, dma_params->mask->ssc_error); > > pr_debug("%s enabled SSC_SR=0x%08x\n", > @@ -657,6 +657,33 @@ static int atmel_ssc_prepare(struct snd_pcm_substream *substream, > return 0; > } > > +static int atmel_ssc_trigger(struct snd_pcm_substream *substream, > + int cmd, struct snd_soc_dai *dai) > +{ > + struct atmel_ssc_info *ssc_p = &ssc_info[dai->id]; > + struct atmel_pcm_dma_params *dma_params; > + int dir; > + > + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) > + dir = 0; > + else > + dir = 1; > + > + dma_params = ssc_p->dma_params[dir]; > + > + switch (cmd) { > + case SNDRV_PCM_TRIGGER_START: > + case SNDRV_PCM_TRIGGER_RESUME: > + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: > + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable); > + break; > + default: > + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable); > + break; > + } > + > + return 0; > +} > > #ifdef CONFIG_PM > static int atmel_ssc_suspend(struct snd_soc_dai *cpu_dai) > @@ -731,6 +758,7 @@ static const struct snd_soc_dai_ops atmel_ssc_dai_ops = { > .startup = atmel_ssc_startup, > .shutdown = atmel_ssc_shutdown, > .prepare = atmel_ssc_prepare, > + .trigger = atmel_ssc_trigger, > .hw_params = atmel_ssc_hw_params, > .set_fmt = atmel_ssc_set_dai_fmt, > .set_clkdiv = atmel_ssc_set_dai_clkdiv, > Tested-by: Richard Genoud <richard.genoud@gmail.com> on at91sam9g35-ek with 3.12-rc2 + "ASoC: wm8731: fix dsp mode configuration" ^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH 1/2] ASoC: atmel_ssc_dai: add dai trigger ops @ 2013-12-04 11:38 ` Richard Genoud 0 siblings, 0 replies; 27+ messages in thread From: Richard Genoud @ 2013-12-04 11:38 UTC (permalink / raw) To: linux-arm-kernel On 04/12/2013 03:37, Bo Shen wrote: > According to the SSC specifiation, it should be enabled after DMA is > enabled. So, add trigger operation to make sure the right sequence. > > Signed-off-by: Bo Shen <voice.shen@atmel.com> > --- > sound/soc/atmel/atmel_ssc_dai.c | 30 +++++++++++++++++++++++++++++- > 1 file changed, 29 insertions(+), 1 deletion(-) > > diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c > index 8697ced..1ead3c9 100644 > --- a/sound/soc/atmel/atmel_ssc_dai.c > +++ b/sound/soc/atmel/atmel_ssc_dai.c > @@ -648,7 +648,7 @@ static int atmel_ssc_prepare(struct snd_pcm_substream *substream, > > dma_params = ssc_p->dma_params[dir]; > > - ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable); > + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable); > ssc_writel(ssc_p->ssc->regs, IDR, dma_params->mask->ssc_error); > > pr_debug("%s enabled SSC_SR=0x%08x\n", > @@ -657,6 +657,33 @@ static int atmel_ssc_prepare(struct snd_pcm_substream *substream, > return 0; > } > > +static int atmel_ssc_trigger(struct snd_pcm_substream *substream, > + int cmd, struct snd_soc_dai *dai) > +{ > + struct atmel_ssc_info *ssc_p = &ssc_info[dai->id]; > + struct atmel_pcm_dma_params *dma_params; > + int dir; > + > + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) > + dir = 0; > + else > + dir = 1; > + > + dma_params = ssc_p->dma_params[dir]; > + > + switch (cmd) { > + case SNDRV_PCM_TRIGGER_START: > + case SNDRV_PCM_TRIGGER_RESUME: > + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: > + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable); > + break; > + default: > + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable); > + break; > + } > + > + return 0; > +} > > #ifdef CONFIG_PM > static int atmel_ssc_suspend(struct snd_soc_dai *cpu_dai) > @@ -731,6 +758,7 @@ static const struct snd_soc_dai_ops atmel_ssc_dai_ops = { > .startup = atmel_ssc_startup, > .shutdown = atmel_ssc_shutdown, > .prepare = atmel_ssc_prepare, > + .trigger = atmel_ssc_trigger, > .hw_params = atmel_ssc_hw_params, > .set_fmt = atmel_ssc_set_dai_fmt, > .set_clkdiv = atmel_ssc_set_dai_clkdiv, > Tested-by: Richard Genoud <richard.genoud@gmail.com> on at91sam9g35-ek with 3.12-rc2 + "ASoC: wm8731: fix dsp mode configuration" ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 1/2] ASoC: atmel_ssc_dai: add dai trigger ops @ 2013-12-04 11:38 ` Richard Genoud 0 siblings, 0 replies; 27+ messages in thread From: Richard Genoud @ 2013-12-04 11:38 UTC (permalink / raw) To: Bo Shen Cc: broonie, nicolas.ferre, zql, linux-sound, alsa-devel, linux-arm-kernel On 04/12/2013 03:37, Bo Shen wrote: > According to the SSC specifiation, it should be enabled after DMA is > enabled. So, add trigger operation to make sure the right sequence. > > Signed-off-by: Bo Shen <voice.shen@atmel.com> > --- > sound/soc/atmel/atmel_ssc_dai.c | 30 +++++++++++++++++++++++++++++- > 1 file changed, 29 insertions(+), 1 deletion(-) > > diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c > index 8697ced..1ead3c9 100644 > --- a/sound/soc/atmel/atmel_ssc_dai.c > +++ b/sound/soc/atmel/atmel_ssc_dai.c > @@ -648,7 +648,7 @@ static int atmel_ssc_prepare(struct snd_pcm_substream *substream, > > dma_params = ssc_p->dma_params[dir]; > > - ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable); > + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable); > ssc_writel(ssc_p->ssc->regs, IDR, dma_params->mask->ssc_error); > > pr_debug("%s enabled SSC_SR=0x%08x\n", > @@ -657,6 +657,33 @@ static int atmel_ssc_prepare(struct snd_pcm_substream *substream, > return 0; > } > > +static int atmel_ssc_trigger(struct snd_pcm_substream *substream, > + int cmd, struct snd_soc_dai *dai) > +{ > + struct atmel_ssc_info *ssc_p = &ssc_info[dai->id]; > + struct atmel_pcm_dma_params *dma_params; > + int dir; > + > + if (substream->stream = SNDRV_PCM_STREAM_PLAYBACK) > + dir = 0; > + else > + dir = 1; > + > + dma_params = ssc_p->dma_params[dir]; > + > + switch (cmd) { > + case SNDRV_PCM_TRIGGER_START: > + case SNDRV_PCM_TRIGGER_RESUME: > + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: > + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable); > + break; > + default: > + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable); > + break; > + } > + > + return 0; > +} > > #ifdef CONFIG_PM > static int atmel_ssc_suspend(struct snd_soc_dai *cpu_dai) > @@ -731,6 +758,7 @@ static const struct snd_soc_dai_ops atmel_ssc_dai_ops = { > .startup = atmel_ssc_startup, > .shutdown = atmel_ssc_shutdown, > .prepare = atmel_ssc_prepare, > + .trigger = atmel_ssc_trigger, > .hw_params = atmel_ssc_hw_params, > .set_fmt = atmel_ssc_set_dai_fmt, > .set_clkdiv = atmel_ssc_set_dai_clkdiv, > Tested-by: Richard Genoud <richard.genoud@gmail.com> on at91sam9g35-ek with 3.12-rc2 + "ASoC: wm8731: fix dsp mode configuration" ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 1/2] ASoC: atmel_ssc_dai: add dai trigger ops 2013-12-04 2:37 ` Bo Shen (?) @ 2013-12-04 11:43 ` Mark Brown -1 siblings, 0 replies; 27+ messages in thread From: Mark Brown @ 2013-12-04 11:43 UTC (permalink / raw) To: Bo Shen Cc: zql, richard.genoud, nicolas.ferre, alsa-devel, linux-sound, linux-arm-kernel [-- Attachment #1.1: Type: text/plain, Size: 216 bytes --] On Wed, Dec 04, 2013 at 10:37:03AM +0800, Bo Shen wrote: > According to the SSC specifiation, it should be enabled after DMA is > enabled. So, add trigger operation to make sure the right sequence. Applied, thanks. [-- Attachment #1.2: Digital signature --] [-- Type: application/pgp-signature, Size: 836 bytes --] [-- Attachment #2: Type: text/plain, Size: 0 bytes --] ^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH 1/2] ASoC: atmel_ssc_dai: add dai trigger ops @ 2013-12-04 11:43 ` Mark Brown 0 siblings, 0 replies; 27+ messages in thread From: Mark Brown @ 2013-12-04 11:43 UTC (permalink / raw) To: linux-arm-kernel On Wed, Dec 04, 2013 at 10:37:03AM +0800, Bo Shen wrote: > According to the SSC specifiation, it should be enabled after DMA is > enabled. So, add trigger operation to make sure the right sequence. Applied, thanks. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131204/8a3b3c97/attachment.sig> ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 1/2] ASoC: atmel_ssc_dai: add dai trigger ops @ 2013-12-04 11:43 ` Mark Brown 0 siblings, 0 replies; 27+ messages in thread From: Mark Brown @ 2013-12-04 11:43 UTC (permalink / raw) To: Bo Shen Cc: zql, richard.genoud, nicolas.ferre, alsa-devel, linux-sound, linux-arm-kernel [-- Attachment #1: Type: text/plain, Size: 216 bytes --] On Wed, Dec 04, 2013 at 10:37:03AM +0800, Bo Shen wrote: > According to the SSC specifiation, it should be enabled after DMA is > enabled. So, add trigger operation to make sure the right sequence. Applied, thanks. [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 836 bytes --] ^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH 2/2] ASoC: sam9x5_wm8731: change to work in DSP A mode 2013-12-04 2:37 ` Bo Shen (?) @ 2013-12-04 2:37 ` Bo Shen -1 siblings, 0 replies; 27+ messages in thread From: Bo Shen @ 2013-12-04 2:37 UTC (permalink / raw) To: broonie Cc: nicolas.ferre, richard.genoud, zql, linux-sound, alsa-devel, linux-arm-kernel, Bo Shen Change sam9x5 with wm8731 work in DSP A mode, this will fix the left/right channel swap issue. Signed-off-by: Bo Shen <voice.shen@atmel.com> --- sound/soc/atmel/sam9x5_wm8731.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/atmel/sam9x5_wm8731.c b/sound/soc/atmel/sam9x5_wm8731.c index 992ae38..06c1811 100644 --- a/sound/soc/atmel/sam9x5_wm8731.c +++ b/sound/soc/atmel/sam9x5_wm8731.c @@ -107,7 +107,7 @@ static int sam9x5_wm8731_driver_probe(struct platform_device *pdev) dai->stream_name = "WM8731 PCM"; dai->codec_dai_name = "wm8731-hifi"; dai->init = sam9x5_wm8731_init; - dai->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF + dai->dai_fmt = SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM; ret = snd_soc_of_parse_card_name(card, "atmel,model"); -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 2/2] ASoC: sam9x5_wm8731: change to work in DSP A mode @ 2013-12-04 2:37 ` Bo Shen 0 siblings, 0 replies; 27+ messages in thread From: Bo Shen @ 2013-12-04 2:37 UTC (permalink / raw) To: linux-arm-kernel Change sam9x5 with wm8731 work in DSP A mode, this will fix the left/right channel swap issue. Signed-off-by: Bo Shen <voice.shen@atmel.com> --- sound/soc/atmel/sam9x5_wm8731.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/atmel/sam9x5_wm8731.c b/sound/soc/atmel/sam9x5_wm8731.c index 992ae38..06c1811 100644 --- a/sound/soc/atmel/sam9x5_wm8731.c +++ b/sound/soc/atmel/sam9x5_wm8731.c @@ -107,7 +107,7 @@ static int sam9x5_wm8731_driver_probe(struct platform_device *pdev) dai->stream_name = "WM8731 PCM"; dai->codec_dai_name = "wm8731-hifi"; dai->init = sam9x5_wm8731_init; - dai->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF + dai->dai_fmt = SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM; ret = snd_soc_of_parse_card_name(card, "atmel,model"); -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 2/2] ASoC: sam9x5_wm8731: change to work in DSP A mode @ 2013-12-04 2:37 ` Bo Shen 0 siblings, 0 replies; 27+ messages in thread From: Bo Shen @ 2013-12-04 2:37 UTC (permalink / raw) To: broonie Cc: nicolas.ferre, richard.genoud, zql, linux-sound, alsa-devel, linux-arm-kernel, Bo Shen Change sam9x5 with wm8731 work in DSP A mode, this will fix the left/right channel swap issue. Signed-off-by: Bo Shen <voice.shen@atmel.com> --- sound/soc/atmel/sam9x5_wm8731.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/atmel/sam9x5_wm8731.c b/sound/soc/atmel/sam9x5_wm8731.c index 992ae38..06c1811 100644 --- a/sound/soc/atmel/sam9x5_wm8731.c +++ b/sound/soc/atmel/sam9x5_wm8731.c @@ -107,7 +107,7 @@ static int sam9x5_wm8731_driver_probe(struct platform_device *pdev) dai->stream_name = "WM8731 PCM"; dai->codec_dai_name = "wm8731-hifi"; dai->init = sam9x5_wm8731_init; - dai->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF + dai->dai_fmt = SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM; ret = snd_soc_of_parse_card_name(card, "atmel,model"); -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* Re: [PATCH 2/2] ASoC: sam9x5_wm8731: change to work in DSP A mode 2013-12-04 2:37 ` Bo Shen (?) @ 2013-12-04 11:38 ` Richard Genoud -1 siblings, 0 replies; 27+ messages in thread From: Richard Genoud @ 2013-12-04 11:38 UTC (permalink / raw) To: Bo Shen Cc: zql, nicolas.ferre, alsa-devel, linux-sound, broonie, linux-arm-kernel On 04/12/2013 03:37, Bo Shen wrote: > Change sam9x5 with wm8731 work in DSP A mode, this will fix the > left/right channel swap issue. > > Signed-off-by: Bo Shen <voice.shen@atmel.com> > --- > sound/soc/atmel/sam9x5_wm8731.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/sound/soc/atmel/sam9x5_wm8731.c b/sound/soc/atmel/sam9x5_wm8731.c > index 992ae38..06c1811 100644 > --- a/sound/soc/atmel/sam9x5_wm8731.c > +++ b/sound/soc/atmel/sam9x5_wm8731.c > @@ -107,7 +107,7 @@ static int sam9x5_wm8731_driver_probe(struct platform_device *pdev) > dai->stream_name = "WM8731 PCM"; > dai->codec_dai_name = "wm8731-hifi"; > dai->init = sam9x5_wm8731_init; > - dai->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF > + dai->dai_fmt = SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_NB_NF > | SND_SOC_DAIFMT_CBM_CFM; > > ret = snd_soc_of_parse_card_name(card, "atmel,model"); > Tested-by: Richard Genoud <richard.genoud@gmail.com> on at91sam9g35-ek with 3.12-rc2 + "ASoC: wm8731: fix dsp mode configuration" Thanks ! ^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH 2/2] ASoC: sam9x5_wm8731: change to work in DSP A mode @ 2013-12-04 11:38 ` Richard Genoud 0 siblings, 0 replies; 27+ messages in thread From: Richard Genoud @ 2013-12-04 11:38 UTC (permalink / raw) To: linux-arm-kernel On 04/12/2013 03:37, Bo Shen wrote: > Change sam9x5 with wm8731 work in DSP A mode, this will fix the > left/right channel swap issue. > > Signed-off-by: Bo Shen <voice.shen@atmel.com> > --- > sound/soc/atmel/sam9x5_wm8731.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/sound/soc/atmel/sam9x5_wm8731.c b/sound/soc/atmel/sam9x5_wm8731.c > index 992ae38..06c1811 100644 > --- a/sound/soc/atmel/sam9x5_wm8731.c > +++ b/sound/soc/atmel/sam9x5_wm8731.c > @@ -107,7 +107,7 @@ static int sam9x5_wm8731_driver_probe(struct platform_device *pdev) > dai->stream_name = "WM8731 PCM"; > dai->codec_dai_name = "wm8731-hifi"; > dai->init = sam9x5_wm8731_init; > - dai->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF > + dai->dai_fmt = SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_NB_NF > | SND_SOC_DAIFMT_CBM_CFM; > > ret = snd_soc_of_parse_card_name(card, "atmel,model"); > Tested-by: Richard Genoud <richard.genoud@gmail.com> on at91sam9g35-ek with 3.12-rc2 + "ASoC: wm8731: fix dsp mode configuration" Thanks ! ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 2/2] ASoC: sam9x5_wm8731: change to work in DSP A mode @ 2013-12-04 11:38 ` Richard Genoud 0 siblings, 0 replies; 27+ messages in thread From: Richard Genoud @ 2013-12-04 11:38 UTC (permalink / raw) To: Bo Shen Cc: zql, nicolas.ferre, alsa-devel, linux-sound, broonie, linux-arm-kernel On 04/12/2013 03:37, Bo Shen wrote: > Change sam9x5 with wm8731 work in DSP A mode, this will fix the > left/right channel swap issue. > > Signed-off-by: Bo Shen <voice.shen@atmel.com> > --- > sound/soc/atmel/sam9x5_wm8731.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/sound/soc/atmel/sam9x5_wm8731.c b/sound/soc/atmel/sam9x5_wm8731.c > index 992ae38..06c1811 100644 > --- a/sound/soc/atmel/sam9x5_wm8731.c > +++ b/sound/soc/atmel/sam9x5_wm8731.c > @@ -107,7 +107,7 @@ static int sam9x5_wm8731_driver_probe(struct platform_device *pdev) > dai->stream_name = "WM8731 PCM"; > dai->codec_dai_name = "wm8731-hifi"; > dai->init = sam9x5_wm8731_init; > - dai->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF > + dai->dai_fmt = SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_NB_NF > | SND_SOC_DAIFMT_CBM_CFM; > > ret = snd_soc_of_parse_card_name(card, "atmel,model"); > Tested-by: Richard Genoud <richard.genoud@gmail.com> on at91sam9g35-ek with 3.12-rc2 + "ASoC: wm8731: fix dsp mode configuration" Thanks ! ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 2/2] ASoC: sam9x5_wm8731: change to work in DSP A mode 2013-12-04 11:38 ` Richard Genoud (?) @ 2013-12-04 15:54 ` Zhong Li -1 siblings, 0 replies; 27+ messages in thread From: Zhong Li @ 2013-12-04 15:54 UTC (permalink / raw) To: 'Richard Genoud' Cc: alsa-devel, broonie, nicolas.ferre, linux-arm-kernel, linux-sound Richard, > -----Original Message----- > From: linux-arm-kernel [mailto:linux-arm-kernel- > bounces@lists.infradead.org] On Behalf Of Richard Genoud > Sent: Wednesday, December 04, 2013 6:38 AM > To: Bo Shen > Cc: zql@glomationinc.com; nicolas.ferre@atmel.com; alsa-devel@alsa- > project.org; linux-sound@vger.kernel.org; broonie@kernel.org; linux- > arm-kernel@lists.infradead.org > Subject: Re: [PATCH 2/2] ASoC: sam9x5_wm8731: change to work in DSP A > mode > > On 04/12/2013 03:37, Bo Shen wrote: > > Change sam9x5 with wm8731 work in DSP A mode, this will fix the > > left/right channel swap issue. > > > > > Tested-by: Richard Genoud <richard.genoud@gmail.com> on at91sam9g35-ek > with 3.12-rc2 + "ASoC: wm8731: fix dsp mode configuration" > > > Thanks ! > > Where can I get a snap shot of your kernel source? My test still have the same issue after I applied the two patches. Thanks, Zhong ^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH 2/2] ASoC: sam9x5_wm8731: change to work in DSP A mode @ 2013-12-04 15:54 ` Zhong Li 0 siblings, 0 replies; 27+ messages in thread From: Zhong Li @ 2013-12-04 15:54 UTC (permalink / raw) To: linux-arm-kernel Richard, > -----Original Message----- > From: linux-arm-kernel [mailto:linux-arm-kernel- > bounces at lists.infradead.org] On Behalf Of Richard Genoud > Sent: Wednesday, December 04, 2013 6:38 AM > To: Bo Shen > Cc: zql at glomationinc.com; nicolas.ferre at atmel.com; alsa-devel at alsa- > project.org; linux-sound at vger.kernel.org; broonie at kernel.org; linux- > arm-kernel at lists.infradead.org > Subject: Re: [PATCH 2/2] ASoC: sam9x5_wm8731: change to work in DSP A > mode > > On 04/12/2013 03:37, Bo Shen wrote: > > Change sam9x5 with wm8731 work in DSP A mode, this will fix the > > left/right channel swap issue. > > > > > Tested-by: Richard Genoud <richard.genoud@gmail.com> on at91sam9g35-ek > with 3.12-rc2 + "ASoC: wm8731: fix dsp mode configuration" > > > Thanks ! > > Where can I get a snap shot of your kernel source? My test still have the same issue after I applied the two patches. Thanks, Zhong ^ permalink raw reply [flat|nested] 27+ messages in thread
* RE: [PATCH 2/2] ASoC: sam9x5_wm8731: change to work in DSP A mode @ 2013-12-04 15:54 ` Zhong Li 0 siblings, 0 replies; 27+ messages in thread From: Zhong Li @ 2013-12-04 15:54 UTC (permalink / raw) To: 'Richard Genoud' Cc: alsa-devel, broonie, nicolas.ferre, linux-arm-kernel, linux-sound Richard, > -----Original Message----- > From: linux-arm-kernel [mailto:linux-arm-kernel- > bounces@lists.infradead.org] On Behalf Of Richard Genoud > Sent: Wednesday, December 04, 2013 6:38 AM > To: Bo Shen > Cc: zql@glomationinc.com; nicolas.ferre@atmel.com; alsa-devel@alsa- > project.org; linux-sound@vger.kernel.org; broonie@kernel.org; linux- > arm-kernel@lists.infradead.org > Subject: Re: [PATCH 2/2] ASoC: sam9x5_wm8731: change to work in DSP A > mode > > On 04/12/2013 03:37, Bo Shen wrote: > > Change sam9x5 with wm8731 work in DSP A mode, this will fix the > > left/right channel swap issue. > > > > > Tested-by: Richard Genoud <richard.genoud@gmail.com> on at91sam9g35-ek > with 3.12-rc2 + "ASoC: wm8731: fix dsp mode configuration" > > > Thanks ! > > Where can I get a snap shot of your kernel source? My test still have the same issue after I applied the two patches. Thanks, Zhong ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 2/2] ASoC: sam9x5_wm8731: change to work in DSP A mode 2013-12-04 15:54 ` Zhong Li (?) @ 2013-12-04 16:06 ` Richard Genoud -1 siblings, 0 replies; 27+ messages in thread From: Richard Genoud @ 2013-12-04 16:06 UTC (permalink / raw) To: Zhong Li Cc: Nicolas Ferre, alsa-devel, linux-sound, Mark Brown, linux-arm-kernel@lists.infradead.org 2013/12/4 Zhong Li <zql@glomationinc.com>: > Richard, > >> -----Original Message----- >> From: linux-arm-kernel [mailto:linux-arm-kernel- >> bounces@lists.infradead.org] On Behalf Of Richard Genoud >> Sent: Wednesday, December 04, 2013 6:38 AM >> To: Bo Shen >> Cc: zql@glomationinc.com; nicolas.ferre@atmel.com; alsa-devel@alsa- >> project.org; linux-sound@vger.kernel.org; broonie@kernel.org; linux- >> arm-kernel@lists.infradead.org >> Subject: Re: [PATCH 2/2] ASoC: sam9x5_wm8731: change to work in DSP A >> mode >> >> On 04/12/2013 03:37, Bo Shen wrote: >> > Change sam9x5 with wm8731 work in DSP A mode, this will fix the >> > left/right channel swap issue. >> > > >> > >> Tested-by: Richard Genoud <richard.genoud@gmail.com> on at91sam9g35-ek >> with 3.12-rc2 + "ASoC: wm8731: fix dsp mode configuration" >> >> >> Thanks ! >> >> > > Where can I get a snap shot of your kernel source? My test still have the > same issue after I applied the two patches. I don't have a public git, but I just applied the patches : "ASoC: wm8731: fix dsp mode configuration" "ASoC: sam9x5_wm8731: change to work in DSP A mode" "ASoC: atmel_ssc_dai: add dai trigger ops" on top of 3.12-rc2 => maybe you missed the third patch "ASoC: wm8731: fix dsp mode configuration" which was not part of the serie. (without it, you should have a left channel almost ok and a noisy right channel) and if you want a git tree, you can still test with mark's : git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git branch sound_asoc/for-next or tag asoc-v3.13-rc2 ^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH 2/2] ASoC: sam9x5_wm8731: change to work in DSP A mode @ 2013-12-04 16:06 ` Richard Genoud 0 siblings, 0 replies; 27+ messages in thread From: Richard Genoud @ 2013-12-04 16:06 UTC (permalink / raw) To: linux-arm-kernel 2013/12/4 Zhong Li <zql@glomationinc.com>: > Richard, > >> -----Original Message----- >> From: linux-arm-kernel [mailto:linux-arm-kernel- >> bounces at lists.infradead.org] On Behalf Of Richard Genoud >> Sent: Wednesday, December 04, 2013 6:38 AM >> To: Bo Shen >> Cc: zql at glomationinc.com; nicolas.ferre at atmel.com; alsa-devel at alsa- >> project.org; linux-sound at vger.kernel.org; broonie at kernel.org; linux- >> arm-kernel at lists.infradead.org >> Subject: Re: [PATCH 2/2] ASoC: sam9x5_wm8731: change to work in DSP A >> mode >> >> On 04/12/2013 03:37, Bo Shen wrote: >> > Change sam9x5 with wm8731 work in DSP A mode, this will fix the >> > left/right channel swap issue. >> > > >> > >> Tested-by: Richard Genoud <richard.genoud@gmail.com> on at91sam9g35-ek >> with 3.12-rc2 + "ASoC: wm8731: fix dsp mode configuration" >> >> >> Thanks ! >> >> > > Where can I get a snap shot of your kernel source? My test still have the > same issue after I applied the two patches. I don't have a public git, but I just applied the patches : "ASoC: wm8731: fix dsp mode configuration" "ASoC: sam9x5_wm8731: change to work in DSP A mode" "ASoC: atmel_ssc_dai: add dai trigger ops" on top of 3.12-rc2 => maybe you missed the third patch "ASoC: wm8731: fix dsp mode configuration" which was not part of the serie. (without it, you should have a left channel almost ok and a noisy right channel) and if you want a git tree, you can still test with mark's : git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git branch sound_asoc/for-next or tag asoc-v3.13-rc2 ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 2/2] ASoC: sam9x5_wm8731: change to work in DSP A mode @ 2013-12-04 16:06 ` Richard Genoud 0 siblings, 0 replies; 27+ messages in thread From: Richard Genoud @ 2013-12-04 16:06 UTC (permalink / raw) To: Zhong Li Cc: Nicolas Ferre, alsa-devel, linux-sound, Mark Brown, linux-arm-kernel@lists.infradead.org 2013/12/4 Zhong Li <zql@glomationinc.com>: > Richard, > >> -----Original Message----- >> From: linux-arm-kernel [mailto:linux-arm-kernel- >> bounces@lists.infradead.org] On Behalf Of Richard Genoud >> Sent: Wednesday, December 04, 2013 6:38 AM >> To: Bo Shen >> Cc: zql@glomationinc.com; nicolas.ferre@atmel.com; alsa-devel@alsa- >> project.org; linux-sound@vger.kernel.org; broonie@kernel.org; linux- >> arm-kernel@lists.infradead.org >> Subject: Re: [PATCH 2/2] ASoC: sam9x5_wm8731: change to work in DSP A >> mode >> >> On 04/12/2013 03:37, Bo Shen wrote: >> > Change sam9x5 with wm8731 work in DSP A mode, this will fix the >> > left/right channel swap issue. >> > > >> > >> Tested-by: Richard Genoud <richard.genoud@gmail.com> on at91sam9g35-ek >> with 3.12-rc2 + "ASoC: wm8731: fix dsp mode configuration" >> >> >> Thanks ! >> >> > > Where can I get a snap shot of your kernel source? My test still have the > same issue after I applied the two patches. I don't have a public git, but I just applied the patches : "ASoC: wm8731: fix dsp mode configuration" "ASoC: sam9x5_wm8731: change to work in DSP A mode" "ASoC: atmel_ssc_dai: add dai trigger ops" on top of 3.12-rc2 => maybe you missed the third patch "ASoC: wm8731: fix dsp mode configuration" which was not part of the serie. (without it, you should have a left channel almost ok and a noisy right channel) and if you want a git tree, you can still test with mark's : git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git branch sound_asoc/for-next or tag asoc-v3.13-rc2 ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 2/2] ASoC: sam9x5_wm8731: change to work in DSP A mode 2013-12-04 2:37 ` Bo Shen (?) @ 2013-12-04 11:44 ` Mark Brown -1 siblings, 0 replies; 27+ messages in thread From: Mark Brown @ 2013-12-04 11:44 UTC (permalink / raw) To: Bo Shen Cc: nicolas.ferre, richard.genoud, zql, linux-sound, alsa-devel, linux-arm-kernel [-- Attachment #1: Type: text/plain, Size: 174 bytes --] On Wed, Dec 04, 2013 at 10:37:04AM +0800, Bo Shen wrote: > Change sam9x5 with wm8731 work in DSP A mode, this will fix the > left/right channel swap issue. Applied, thanks. [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 836 bytes --] ^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH 2/2] ASoC: sam9x5_wm8731: change to work in DSP A mode @ 2013-12-04 11:44 ` Mark Brown 0 siblings, 0 replies; 27+ messages in thread From: Mark Brown @ 2013-12-04 11:44 UTC (permalink / raw) To: linux-arm-kernel On Wed, Dec 04, 2013 at 10:37:04AM +0800, Bo Shen wrote: > Change sam9x5 with wm8731 work in DSP A mode, this will fix the > left/right channel swap issue. Applied, thanks. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131204/dff007c3/attachment.sig> ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 2/2] ASoC: sam9x5_wm8731: change to work in DSP A mode @ 2013-12-04 11:44 ` Mark Brown 0 siblings, 0 replies; 27+ messages in thread From: Mark Brown @ 2013-12-04 11:44 UTC (permalink / raw) To: Bo Shen Cc: nicolas.ferre, richard.genoud, zql, linux-sound, alsa-devel, linux-arm-kernel [-- Attachment #1: Type: text/plain, Size: 174 bytes --] On Wed, Dec 04, 2013 at 10:37:04AM +0800, Bo Shen wrote: > Change sam9x5 with wm8731 work in DSP A mode, this will fix the > left/right channel swap issue. Applied, thanks. [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 836 bytes --] ^ permalink raw reply [flat|nested] 27+ messages in thread
end of thread, other threads:[~2013-12-04 16:06 UTC | newest] Thread overview: 27+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-12-04 2:37 [PATCH 0/2] ASoC: sam9x5_wm8731: fix left right channel swap issue Bo Shen 2013-12-04 2:37 ` Bo Shen 2013-12-04 2:37 ` Bo Shen 2013-12-04 2:37 ` [PATCH 1/2] ASoC: atmel_ssc_dai: add dai trigger ops Bo Shen 2013-12-04 2:37 ` Bo Shen 2013-12-04 2:37 ` Bo Shen 2013-12-04 11:38 ` Richard Genoud 2013-12-04 11:38 ` Richard Genoud 2013-12-04 11:38 ` Richard Genoud 2013-12-04 11:43 ` Mark Brown 2013-12-04 11:43 ` Mark Brown 2013-12-04 11:43 ` Mark Brown 2013-12-04 2:37 ` [PATCH 2/2] ASoC: sam9x5_wm8731: change to work in DSP A mode Bo Shen 2013-12-04 2:37 ` Bo Shen 2013-12-04 2:37 ` Bo Shen 2013-12-04 11:38 ` Richard Genoud 2013-12-04 11:38 ` Richard Genoud 2013-12-04 11:38 ` Richard Genoud 2013-12-04 15:54 ` Zhong Li 2013-12-04 15:54 ` Zhong Li 2013-12-04 15:54 ` Zhong Li 2013-12-04 16:06 ` Richard Genoud 2013-12-04 16:06 ` Richard Genoud 2013-12-04 16:06 ` Richard Genoud 2013-12-04 11:44 ` Mark Brown 2013-12-04 11:44 ` Mark Brown 2013-12-04 11:44 ` Mark Brown
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.