From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 2/3] ARM: shmobile: Koelsch: add Ether support
Date: Mon, 09 Dec 2013 22:10:08 +0000 [thread overview]
Message-ID: <52A64DCB.8000504@cogentembedded.com> (raw)
In-Reply-To: <CAMuHMdXDHMRy2LTEa50omMs0dV9Vdf2woBsNAHzhkceXDfqyOg@mail.gmail.com>
On 12/09/2013 10:40 PM, Geert Uytterhoeven wrote:
>>>> --- renesas.orig/arch/arm/mach-shmobile/board-koelsch.c
>>>> +++ renesas/arch/arm/mach-shmobile/board-koelsch.c
>>>> +/* Ether */
>>>> +static const struct sh_eth_plat_data ether_pdata __initconst = {
>>>> + .phy = 0x1,
>>>> + .edmac_endian = EDMAC_LITTLE_ENDIAN,
>>>> + .phy_interface = PHY_INTERFACE_MODE_RMII,
>>>> + .ether_link_active_low = 1,
>>>> +};
>>> With the above, NFS root is terrible slow,
>> Do you get NFS timeout(s) on booting? I do. It's a known issue.
> I only saw "NFS server not responding" once.
Yes, I meant that by NFS timeout. Sometimes I see 2 of them in a row.
>> You can try my simplistic 'sh_eth' driver patch:
>> http://marc.info/?l=linux-sh&m\x137911743723032
> Thanks, that also fixes the problem!
Let's hope Florian's patches get queued for 3.14. You can also test them
meanwhile...
> Gr{oetje,eeting}s,
>
> Geert
WBR, Sergei
WARNING: multiple messages have this Message-ID (diff)
From: sergei.shtylyov@cogentembedded.com (Sergei Shtylyov)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/3] ARM: shmobile: Koelsch: add Ether support
Date: Tue, 10 Dec 2013 02:10:03 +0300 [thread overview]
Message-ID: <52A64DCB.8000504@cogentembedded.com> (raw)
In-Reply-To: <CAMuHMdXDHMRy2LTEa50omMs0dV9Vdf2woBsNAHzhkceXDfqyOg@mail.gmail.com>
On 12/09/2013 10:40 PM, Geert Uytterhoeven wrote:
>>>> --- renesas.orig/arch/arm/mach-shmobile/board-koelsch.c
>>>> +++ renesas/arch/arm/mach-shmobile/board-koelsch.c
>>>> +/* Ether */
>>>> +static const struct sh_eth_plat_data ether_pdata __initconst = {
>>>> + .phy = 0x1,
>>>> + .edmac_endian = EDMAC_LITTLE_ENDIAN,
>>>> + .phy_interface = PHY_INTERFACE_MODE_RMII,
>>>> + .ether_link_active_low = 1,
>>>> +};
>>> With the above, NFS root is terrible slow,
>> Do you get NFS timeout(s) on booting? I do. It's a known issue.
> I only saw "NFS server not responding" once.
Yes, I meant that by NFS timeout. Sometimes I see 2 of them in a row.
>> You can try my simplistic 'sh_eth' driver patch:
>> http://marc.info/?l=linux-sh&m=137911743723032
> Thanks, that also fixes the problem!
Let's hope Florian's patches get queued for 3.14. You can also test them
meanwhile...
> Gr{oetje,eeting}s,
>
> Geert
WBR, Sergei
next prev parent reply other threads:[~2013-12-09 22:10 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-08 19:48 [PATCH v3 0/3] Add Ether support for R8A7791/Koelsch board Sergei Shtylyov
2013-12-08 20:48 ` Sergei Shtylyov
2013-12-08 19:50 ` [PATCH v3 1/3] ARM: shmobile: r8a7791: add Ether clock Sergei Shtylyov
2013-12-08 20:50 ` Sergei Shtylyov
2013-12-08 19:52 ` [PATCH v3 2/3] ARM: shmobile: Koelsch: add Ether support Sergei Shtylyov
2013-12-08 20:52 ` Sergei Shtylyov
2013-12-09 18:52 ` Geert Uytterhoeven
2013-12-09 18:52 ` Geert Uytterhoeven
2013-12-09 19:26 ` Sergei Shtylyov
2013-12-09 20:25 ` Sergei Shtylyov
2013-12-09 19:40 ` Geert Uytterhoeven
2013-12-09 19:40 ` Geert Uytterhoeven
2013-12-09 22:10 ` Sergei Shtylyov [this message]
2013-12-09 23:10 ` Sergei Shtylyov
2013-12-10 13:22 ` Geert Uytterhoeven
2013-12-10 13:22 ` Geert Uytterhoeven
2013-12-10 17:05 ` Florian Fainelli
2013-12-10 17:05 ` Florian Fainelli
2013-12-08 19:54 ` [PATCH v3 3/3] ARM: shmobile: Koelsch: enable Ether in defconfig Sergei Shtylyov
2013-12-08 20:54 ` Sergei Shtylyov
2013-12-12 12:49 ` [PATCH v3 0/3] Add Ether support for R8A7791/Koelsch board Simon Horman
2013-12-12 12:49 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52A64DCB.8000504@cogentembedded.com \
--to=sergei.shtylyov@cogentembedded.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.