* Re: Issue booting Niagara T1 after commit 87fa05aeb3
2013-11-19 12:21 Issue booting Niagara T1 after commit 87fa05aeb3 Fabio M. Di Nitto
@ 2013-12-12 12:33 ` Raúl Porcel
2013-12-13 11:46 ` Raúl Porcel
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Raúl Porcel @ 2013-12-12 12:33 UTC (permalink / raw)
To: sparclinux
Same here, I tried with the default config.
On 11/19/13 13:21, Fabio M. Di Nitto wrote:
> Hi all,
>
> yes I know.. vintage hardware :) It´s running Debian unstable updated to
> approx a week ago (yay for tons of rebuilds to bisect ;)).
>
> fabbione@sunfire:~/linux-2.6$ gcc --version
> gcc (Debian 4.6.4-5) 4.6.4
>
> kernel config is from debian, applied to the various bisect done on
> Linus tree.
>
> sunfire:~# cat /proc/cpuinfo
> cpu : UltraSparc T1 (Niagara)
> fpu : UltraSparc T1 integrated FPU
> pmu : niagara
> prom : OBP 4.28.9 2008/06/30 21:26
> type : sun4v
> ncpus probed : 24
> ..
>
> commit 87fa05aeb3a5e8e21b1a5510eef6983650eff092
> Author: Sam Ravnborg <sam@ravnborg.org>
> Date: Thu Apr 11 21:38:50 2013 +0200
>
> sparc: Use generic idle loop
>
> Add generic cpu_idle support
>
> appears to be culprit and I can´t boot any kernel after that. Reverting
> the commit makes the machine boot again (tested up to commit 4fbf888acc
> from Linus tree).
>
> Sorry I really don´t know that part of the code well enough to propose a
> fix, but I can either provide access to the machine or test debugging
> patches.
>
> Thanks
> Fabio
>
> Few extra info:
>
> with this commit applied (head to the commit):
>
> [SNIP]
> [ 68.089495] scsi0 : Emulex LPe1150 PCIe Fibre Channel Adapter on PCI
> bus 08 device 00 irq 23
> [ 68.089495] scsi0 : Emulex LPe1150 PCIe Fibre Channel Adapter on PCI
> bus 08 device 00 irq 23
> [ 89.429041] INFO: rcu_sched detected stalls on CPUs/tasks:[
> 89.429041] INFO: rcu_sched detected stalls on CPUs/tasks: { { 3 3 10 10
> 15 15} } (detected by 0, tS42 jiffies, g\x18446744073709551328,
> c\x18446744073709551327, q!64)
> (detected by 0, tS42 jiffies, g\x18446744073709551328,
> c\x18446744073709551327, q!64)
> [ 89.431437] * CPU[ 0]: TSTATE[0000000080001603]
> TPC[000000000042b9d4] TNPC[000000000042b9d8] TASK[swapper/0:0]
> [ 89.431437] * CPU[ 0]: TSTATE[0000000080001603]
> TPC[000000000042b9d4] TNPC[000000000042b9d8] TASK[swapper/0:0]
> [ 89.431462] BUG: soft lockup - CPU#3 stuck for 23s! [swapper/3:0]
> [ 89.431462] BUG: soft lockup - CPU#3 stuck for 23s! [swapper/3:0]
> [ 89.431470] BUG: soft lockup - CPU#1 stuck for 23s! [swapper/1:0]
> [ 89.431470] BUG: soft lockup - CPU#1 stuck for 23s! [swapper/1:0]
> [ 89.431479] BUG: soft lockup - CPU#2 stuck for 23s! [swapper/2:0]
> [ 89.431479] BUG: soft lockup - CPU#2 stuck for 23s! [swapper/2:0]
> [ 89.431484] Modules linked in:
> [SNIP]
>
> Most kernels in between that commit to 3.12:
>
> [SNIP]
> [ 68.392210] UDP hash table entries: 4096 (order: 4, 131072 bytes)
> [ 68.393319] UDP-Lite hash table entries: 4096 (order: 4, 131072 bytes)
> [ 68.395425] NET: Registered protocol family 1
> [ 68.396008] pci 0001:05:02.0: Activating ISA DMA hang workarounds
> -- no more output --
>
> With Linus tree up to commit 4fbf888accb39 (didn´t test yet newer trees):
>
> [ 60.770765] scsi2 : Emulex LPe1150 PCIe Fibre Channel Adapter on PCI
> bus 08 device 00 irq 23
> [ 81.923914] INFO: rcu_sched detected stalls on CPUs/tasks: {}
> (detected by 4, tR92 jiffies, g\x18446744073709551336,
> c\x18446744073709551335,5)
> [ 81.924215] INFO: Stall ended before state dump start
> [ 145.419184] INFO: rcu_sched detected stalls on CPUs/tasks: {}
> (detected by 0, t!166 jiffies, g\x18446744073709551336,
> c\x18446744073709551335,7)
> [ 145.419482] INFO: Stall ended before state dump start
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe sparclinux" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: Issue booting Niagara T1 after commit 87fa05aeb3
2013-11-19 12:21 Issue booting Niagara T1 after commit 87fa05aeb3 Fabio M. Di Nitto
2013-12-12 12:33 ` Raúl Porcel
@ 2013-12-13 11:46 ` Raúl Porcel
2014-02-10 21:23 ` [resend] " Fabio M. Di Nitto
2014-04-04 11:50 ` Raúl Porcel
3 siblings, 0 replies; 5+ messages in thread
From: Raúl Porcel @ 2013-12-13 11:46 UTC (permalink / raw)
To: sparclinux
Hello,
On 12/12/13 14:09, Kirill Tkhai wrote:
> Hi,
>
> 12.12.2013, 16:33, "Raúl Porcel" <armin76@gentoo.org>:
>> Same here, I tried with the default config.
>
> just hypothesis. Does "nohlt" command line option help anyway?
>
> Does anything change if you are swapping local_irq_enable() and
> preempt_disable() in smp_callin() (file arch/sparc/kernel/smp_64.c):
Tried both of the suggestions, none worked.
Thanks
^ permalink raw reply [flat|nested] 5+ messages in thread
* [resend] Re: Issue booting Niagara T1 after commit 87fa05aeb3
2013-11-19 12:21 Issue booting Niagara T1 after commit 87fa05aeb3 Fabio M. Di Nitto
2013-12-12 12:33 ` Raúl Porcel
2013-12-13 11:46 ` Raúl Porcel
@ 2014-02-10 21:23 ` Fabio M. Di Nitto
2014-04-04 11:50 ` Raúl Porcel
3 siblings, 0 replies; 5+ messages in thread
From: Fabio M. Di Nitto @ 2014-02-10 21:23 UTC (permalink / raw)
To: sparclinux
HI all,
another user has reported a similar issue. Anything that I can help with
to have a fix?
Thanks
Fabio
On 11/19/2013 01:21 PM, Fabio M. Di Nitto wrote:
> Hi all,
>
> yes I know.. vintage hardware :) It´s running Debian unstable updated to
> approx a week ago (yay for tons of rebuilds to bisect ;)).
>
> fabbione@sunfire:~/linux-2.6$ gcc --version
> gcc (Debian 4.6.4-5) 4.6.4
>
> kernel config is from debian, applied to the various bisect done on
> Linus tree.
>
> sunfire:~# cat /proc/cpuinfo
> cpu : UltraSparc T1 (Niagara)
> fpu : UltraSparc T1 integrated FPU
> pmu : niagara
> prom : OBP 4.28.9 2008/06/30 21:26
> type : sun4v
> ncpus probed : 24
> ..
>
> commit 87fa05aeb3a5e8e21b1a5510eef6983650eff092
> Author: Sam Ravnborg <sam@ravnborg.org>
> Date: Thu Apr 11 21:38:50 2013 +0200
>
> sparc: Use generic idle loop
>
> Add generic cpu_idle support
>
> appears to be culprit and I can´t boot any kernel after that. Reverting
> the commit makes the machine boot again (tested up to commit 4fbf888acc
> from Linus tree).
>
> Sorry I really don´t know that part of the code well enough to propose a
> fix, but I can either provide access to the machine or test debugging
> patches.
>
> Thanks
> Fabio
>
> Few extra info:
>
> with this commit applied (head to the commit):
>
> [SNIP]
> [ 68.089495] scsi0 : Emulex LPe1150 PCIe Fibre Channel Adapter on PCI
> bus 08 device 00 irq 23
> [ 68.089495] scsi0 : Emulex LPe1150 PCIe Fibre Channel Adapter on PCI
> bus 08 device 00 irq 23
> [ 89.429041] INFO: rcu_sched detected stalls on CPUs/tasks:[
> 89.429041] INFO: rcu_sched detected stalls on CPUs/tasks: { { 3 3 10 10
> 15 15} } (detected by 0, tS42 jiffies, g\x18446744073709551328,
> c\x18446744073709551327, q!64)
> (detected by 0, tS42 jiffies, g\x18446744073709551328,
> c\x18446744073709551327, q!64)
> [ 89.431437] * CPU[ 0]: TSTATE[0000000080001603]
> TPC[000000000042b9d4] TNPC[000000000042b9d8] TASK[swapper/0:0]
> [ 89.431437] * CPU[ 0]: TSTATE[0000000080001603]
> TPC[000000000042b9d4] TNPC[000000000042b9d8] TASK[swapper/0:0]
> [ 89.431462] BUG: soft lockup - CPU#3 stuck for 23s! [swapper/3:0]
> [ 89.431462] BUG: soft lockup - CPU#3 stuck for 23s! [swapper/3:0]
> [ 89.431470] BUG: soft lockup - CPU#1 stuck for 23s! [swapper/1:0]
> [ 89.431470] BUG: soft lockup - CPU#1 stuck for 23s! [swapper/1:0]
> [ 89.431479] BUG: soft lockup - CPU#2 stuck for 23s! [swapper/2:0]
> [ 89.431479] BUG: soft lockup - CPU#2 stuck for 23s! [swapper/2:0]
> [ 89.431484] Modules linked in:
> [SNIP]
>
> Most kernels in between that commit to 3.12:
>
> [SNIP]
> [ 68.392210] UDP hash table entries: 4096 (order: 4, 131072 bytes)
> [ 68.393319] UDP-Lite hash table entries: 4096 (order: 4, 131072 bytes)
> [ 68.395425] NET: Registered protocol family 1
> [ 68.396008] pci 0001:05:02.0: Activating ISA DMA hang workarounds
> -- no more output --
>
> With Linus tree up to commit 4fbf888accb39 (didn´t test yet newer trees):
>
> [ 60.770765] scsi2 : Emulex LPe1150 PCIe Fibre Channel Adapter on PCI
> bus 08 device 00 irq 23
> [ 81.923914] INFO: rcu_sched detected stalls on CPUs/tasks: {}
> (detected by 4, tR92 jiffies, g\x18446744073709551336,
> c\x18446744073709551335,5)
> [ 81.924215] INFO: Stall ended before state dump start
> [ 145.419184] INFO: rcu_sched detected stalls on CPUs/tasks: {}
> (detected by 0, t!166 jiffies, g\x18446744073709551336,
> c\x18446744073709551335,7)
> [ 145.419482] INFO: Stall ended before state dump start
>
>
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [resend] Re: Issue booting Niagara T1 after commit 87fa05aeb3
2013-11-19 12:21 Issue booting Niagara T1 after commit 87fa05aeb3 Fabio M. Di Nitto
` (2 preceding siblings ...)
2014-02-10 21:23 ` [resend] " Fabio M. Di Nitto
@ 2014-04-04 11:50 ` Raúl Porcel
3 siblings, 0 replies; 5+ messages in thread
From: Raúl Porcel @ 2014-04-04 11:50 UTC (permalink / raw)
To: sparclinux
Hi,
Just for the record, commit b3042d609e30e6144024801c89be3925106752b
fixes it.
kernel 3.14 boots fine
On 02/10/14 22:23, Fabio M. Di Nitto wrote:
> HI all,
>
> another user has reported a similar issue. Anything that I can help with
> to have a fix?
>
> Thanks
> Fabio
>
> On 11/19/2013 01:21 PM, Fabio M. Di Nitto wrote:
>> Hi all,
>>
>> yes I know.. vintage hardware :) It´s running Debian unstable updated to
>> approx a week ago (yay for tons of rebuilds to bisect ;)).
>>
>> fabbione@sunfire:~/linux-2.6$ gcc --version
>> gcc (Debian 4.6.4-5) 4.6.4
>>
>> kernel config is from debian, applied to the various bisect done on
>> Linus tree.
>>
>> sunfire:~# cat /proc/cpuinfo
>> cpu : UltraSparc T1 (Niagara)
>> fpu : UltraSparc T1 integrated FPU
>> pmu : niagara
>> prom : OBP 4.28.9 2008/06/30 21:26
>> type : sun4v
>> ncpus probed : 24
>> ..
>>
>> commit 87fa05aeb3a5e8e21b1a5510eef6983650eff092
>> Author: Sam Ravnborg <sam@ravnborg.org>
>> Date: Thu Apr 11 21:38:50 2013 +0200
>>
>> sparc: Use generic idle loop
>>
>> Add generic cpu_idle support
>>
>> appears to be culprit and I can´t boot any kernel after that. Reverting
>> the commit makes the machine boot again (tested up to commit 4fbf888acc
>> from Linus tree).
>>
>> Sorry I really don´t know that part of the code well enough to propose a
>> fix, but I can either provide access to the machine or test debugging
>> patches.
>>
>> Thanks
>> Fabio
>>
>> Few extra info:
>>
>> with this commit applied (head to the commit):
>>
>> [SNIP]
>> [ 68.089495] scsi0 : Emulex LPe1150 PCIe Fibre Channel Adapter on PCI
>> bus 08 device 00 irq 23
>> [ 68.089495] scsi0 : Emulex LPe1150 PCIe Fibre Channel Adapter on PCI
>> bus 08 device 00 irq 23
>> [ 89.429041] INFO: rcu_sched detected stalls on CPUs/tasks:[
>> 89.429041] INFO: rcu_sched detected stalls on CPUs/tasks: { { 3 3 10 10
>> 15 15} } (detected by 0, tS42 jiffies, g\x18446744073709551328,
>> c\x18446744073709551327, q!64)
>> (detected by 0, tS42 jiffies, g\x18446744073709551328,
>> c\x18446744073709551327, q!64)
>> [ 89.431437] * CPU[ 0]: TSTATE[0000000080001603]
>> TPC[000000000042b9d4] TNPC[000000000042b9d8] TASK[swapper/0:0]
>> [ 89.431437] * CPU[ 0]: TSTATE[0000000080001603]
>> TPC[000000000042b9d4] TNPC[000000000042b9d8] TASK[swapper/0:0]
>> [ 89.431462] BUG: soft lockup - CPU#3 stuck for 23s! [swapper/3:0]
>> [ 89.431462] BUG: soft lockup - CPU#3 stuck for 23s! [swapper/3:0]
>> [ 89.431470] BUG: soft lockup - CPU#1 stuck for 23s! [swapper/1:0]
>> [ 89.431470] BUG: soft lockup - CPU#1 stuck for 23s! [swapper/1:0]
>> [ 89.431479] BUG: soft lockup - CPU#2 stuck for 23s! [swapper/2:0]
>> [ 89.431479] BUG: soft lockup - CPU#2 stuck for 23s! [swapper/2:0]
>> [ 89.431484] Modules linked in:
>> [SNIP]
>>
>> Most kernels in between that commit to 3.12:
>>
>> [SNIP]
>> [ 68.392210] UDP hash table entries: 4096 (order: 4, 131072 bytes)
>> [ 68.393319] UDP-Lite hash table entries: 4096 (order: 4, 131072 bytes)
>> [ 68.395425] NET: Registered protocol family 1
>> [ 68.396008] pci 0001:05:02.0: Activating ISA DMA hang workarounds
>> -- no more output --
>>
>> With Linus tree up to commit 4fbf888accb39 (didn´t test yet newer trees):
>>
>> [ 60.770765] scsi2 : Emulex LPe1150 PCIe Fibre Channel Adapter on PCI
>> bus 08 device 00 irq 23
>> [ 81.923914] INFO: rcu_sched detected stalls on CPUs/tasks: {}
>> (detected by 4, tR92 jiffies, g\x18446744073709551336,
>> c\x18446744073709551335,5)
>> [ 81.924215] INFO: Stall ended before state dump start
>> [ 145.419184] INFO: rcu_sched detected stalls on CPUs/tasks: {}
>> (detected by 0, t!166 jiffies, g\x18446744073709551336,
>> c\x18446744073709551335,7)
>> [ 145.419482] INFO: Stall ended before state dump start
>>
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe sparclinux" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 5+ messages in thread