All of lore.kernel.org
 help / color / mirror / Atom feed
From: Benoit Cousson <bcousson@baylibre.com>
To: Nishanth Menon <nm@ti.com>
Cc: Tony Lindgren <tony@atomide.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-omap@vger.kernel.org
Subject: Re: [PATCH] ARM: dts: Add basic devices for AM3517-craneboard
Date: Wed, 18 Dec 2013 17:57:00 +0100	[thread overview]
Message-ID: <52B1D3DC.1010304@baylibre.com> (raw)
In-Reply-To: <52B0A9C8.7070201@ti.com>

Hi Nishanth,

On 17/12/2013 20:45, Nishanth Menon wrote:
> On 12/09/2013 03:55 PM, Nishanth Menon wrote:
>> Craneboard is a hardware development platform based on the Sitara
>> AM3517 ARM Cortex - A8 microprocessor device - see [1] for more
>> details. Add basic devices for craneboard as replacement for the board
>> file scheduled for removal as part of device tree conversion
>>
>> [1] http://craneboard.org
>>
>> Signed-off-by: Nishanth Menon <nm@ti.com>
>> ---
>
> gentle ping.. had'nt seen a response on this patch. Could we queue
> this up for v3.14-rc1?

Yep, it looks good to me.
But if you don't mind I'll start pushing my branch after Xmas :-).

Thanks,
Benoit


>> Based on:
>> git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
>> branch: omap-for-v3.14/omap3-board-removal 736e812 ARM: OMAP2+: Remove unused platform init code and headers
>>
>> Bootlog: http://pastebin.mozilla.org/3744412
>>
>>   arch/arm/boot/dts/Makefile              |    1 +
>>   arch/arm/boot/dts/am3517-craneboard.dts |  174 +++++++++++++++++++++++++++++++
>>   2 files changed, 175 insertions(+)
>>   create mode 100644 arch/arm/boot/dts/am3517-craneboard.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index fc37bca..ad155fc 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -205,6 +205,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
>>   	am335x-boneblack.dtb \
>>   	am335x-nano.dtb \
>>   	am335x-base0033.dtb \
>> +	am3517-craneboard.dtb \
>>   	am3517-evm.dtb \
>>   	am3517_mt_ventoux.dtb \
>>   	am43x-epos-evm.dtb \
>> diff --git a/arch/arm/boot/dts/am3517-craneboard.dts b/arch/arm/boot/dts/am3517-craneboard.dts
>> new file mode 100644
>> index 0000000..2d40b3f
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/am3517-craneboard.dts
>> @@ -0,0 +1,174 @@
>> +/*
>> + * See craneboard.org for more details
>> + *
>> + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +/dts-v1/;
>> +
>> +#include "am3517.dtsi"
>> +
>> +/ {
>> +	model = "TI AM3517 CraneBoard (TMDSEVM3517)";
>> +	compatible = "ti,am3517-craneboard", "ti,am3517", "ti,omap3";
>> +
>> +	memory {
>> +		device_type = "memory";
>> +		reg = <0x80000000 0x10000000>;	/* 256 MB */
>> +	};
>> +
>> +	vbat: fixedregulator@0 {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "vbat";
>> +		regulator-min-microvolt = <5000000>;
>> +		regulator-max-microvolt = <5000000>;
>> +		regulator-boot-on;
>> +	};
>> +};
>> +
>> +&davinci_emac {
>> +	status = "okay";
>> +};
>> +
>> +&davinci_mdio {
>> +	status = "okay";
>> +};
>> +
>> +&i2c1 {
>> +	clock-frequency = <2600000>;
>> +
>> +	tps: tps@2d {
>> +		reg = <0x2d>;
>> +	};
>> +};
>> +
>> +&i2c2 {
>> +	clock-frequency = <400000>;
>> +	/* goes to expansion connector */
>> +	status = "disabled";
>> +};
>> +
>> +&i2c3 {
>> +	clock-frequency = <400000>;
>> +	/* goes to expansion connector */
>> +	status = "disabled";
>> +};
>> +
>> +&mmc1 {
>> +	vmmc-supply = <&vdd2_reg>;
>> +	bus-width = <8>;
>> +};
>> +
>> +&mmc2 {
>> +	/* goes to expansion connector */
>> +	status = "disabled";
>> +};
>> +
>> +&mmc3 {
>> +	/* goes to expansion connector */
>> +	status = "disabled";
>> +};
>> +
>> +#include "tps65910.dtsi"
>> +
>> +&omap3_pmx_core {
>> +	tps_pins: pinmux_tps_pins {
>> +		pinctrl-single,pins = <
>> +			0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */
>> +		>;
>> +	};
>> +};
>> +
>> +&tps {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&tps_pins>;
>> +
>> +	interrupts = <7>; /* SYS_NIRQ cascaded to intc */
>> +	interrupt-parent = <&intc>;
>> +
>> +	ti,en-ck32k-xtal;
>> +
>> +	vcc1-supply = <&vbat>;
>> +	vcc2-supply = <&vbat>;
>> +	vcc3-supply = <&vbat>;
>> +	vcc4-supply = <&vbat>;
>> +	vcc5-supply = <&vbat>;
>> +	vcc6-supply = <&vbat>;
>> +	vcc7-supply = <&vbat>;
>> +	vccio-supply = <&vbat>;
>> +
>> +	regulators {
>> +		vrtc_reg: regulator@0 {
>> +			regulator-always-on;
>> +		};
>> +
>> +		vio_reg: regulator@1 {
>> +			regulator-always-on;
>> +		};
>> +
>> +		/*
>> +		 * Unused:
>> +		 * VDIG1=2.7V,300mA max
>> +		 * VDIG2=1.8V,300mA max
>> +		 */
>> +
>> +		vpll_reg: regulator@7 {
>> +			/* VDDS_DPLL_1V8 */
>> +			regulator-min-microvolt = <1800000>;
>> +			regulator-max-microvolt = <1800000>;
>> +			regulator-always-on;
>> +		};
>> +
>> +		vaux1_reg: regulator@9 {
>> +			/* VDDS_SRAM_1V8 */
>> +			regulator-min-microvolt = <1800000>;
>> +			regulator-max-microvolt = <1800000>;
>> +			regulator-always-on;
>> +		};
>> +
>> +		vaux2_reg: regulator@10 {
>> +			/* VDDA1P8V_USBPHY */
>> +			regulator-min-microvolt = <1800000>;
>> +			regulator-max-microvolt = <1800000>;
>> +			regulator-always-on;
>> +		};
>> +
>> +		/* VAUX33 unused */
>> +
>> +		vdac_reg: regulator@8 {
>> +			/* VDDA_DAC_1V8 */
>> +			regulator-min-microvolt = <1800000>;
>> +			regulator-max-microvolt = <1800000>;
>> +			regulator-always-on;
>> +		};
>> +
>> +		vmmc_reg: regulator@12 {
>> +			/* VDDA3P3V_USBPHY */
>> +			regulator-min-microvolt = <3300000>;
>> +			regulator-max-microvolt = <3300000>;
>> +			regulator-always-on;
>> +		};
>> +
>> +		vdd1_reg: regulator@2 {
>> +			/* VDD_CORE */
>> +			regulator-name = "vdd_core";
>> +			regulator-min-microvolt = <1200000>;
>> +			regulator-max-microvolt = <1200000>;
>> +			regulator-boot-on;
>> +			regulator-always-on;
>> +		};
>> +
>> +		vdd2_reg: regulator@3 {
>> +			/* VDDSHV_3V3 */
>> +			regulator-name = "vdd_shv";
>> +			regulator-min-microvolt = <3300000>;
>> +			regulator-max-microvolt = <3300000>;
>> +			regulator-always-on;
>> +		};
>> +
>> +		/* VDD3 unused */
>> +	};
>> +};
>>
>
>


-- 
Benoît Cousson
BayLibre
Embedded Linux Technology Lab
www.baylibre.com
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: bcousson@baylibre.com (Benoit Cousson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: Add basic devices for AM3517-craneboard
Date: Wed, 18 Dec 2013 17:57:00 +0100	[thread overview]
Message-ID: <52B1D3DC.1010304@baylibre.com> (raw)
In-Reply-To: <52B0A9C8.7070201@ti.com>

Hi Nishanth,

On 17/12/2013 20:45, Nishanth Menon wrote:
> On 12/09/2013 03:55 PM, Nishanth Menon wrote:
>> Craneboard is a hardware development platform based on the Sitara
>> AM3517 ARM Cortex - A8 microprocessor device - see [1] for more
>> details. Add basic devices for craneboard as replacement for the board
>> file scheduled for removal as part of device tree conversion
>>
>> [1] http://craneboard.org
>>
>> Signed-off-by: Nishanth Menon <nm@ti.com>
>> ---
>
> gentle ping.. had'nt seen a response on this patch. Could we queue
> this up for v3.14-rc1?

Yep, it looks good to me.
But if you don't mind I'll start pushing my branch after Xmas :-).

Thanks,
Benoit


>> Based on:
>> git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
>> branch: omap-for-v3.14/omap3-board-removal 736e812 ARM: OMAP2+: Remove unused platform init code and headers
>>
>> Bootlog: http://pastebin.mozilla.org/3744412
>>
>>   arch/arm/boot/dts/Makefile              |    1 +
>>   arch/arm/boot/dts/am3517-craneboard.dts |  174 +++++++++++++++++++++++++++++++
>>   2 files changed, 175 insertions(+)
>>   create mode 100644 arch/arm/boot/dts/am3517-craneboard.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index fc37bca..ad155fc 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -205,6 +205,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
>>   	am335x-boneblack.dtb \
>>   	am335x-nano.dtb \
>>   	am335x-base0033.dtb \
>> +	am3517-craneboard.dtb \
>>   	am3517-evm.dtb \
>>   	am3517_mt_ventoux.dtb \
>>   	am43x-epos-evm.dtb \
>> diff --git a/arch/arm/boot/dts/am3517-craneboard.dts b/arch/arm/boot/dts/am3517-craneboard.dts
>> new file mode 100644
>> index 0000000..2d40b3f
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/am3517-craneboard.dts
>> @@ -0,0 +1,174 @@
>> +/*
>> + * See craneboard.org for more details
>> + *
>> + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +/dts-v1/;
>> +
>> +#include "am3517.dtsi"
>> +
>> +/ {
>> +	model = "TI AM3517 CraneBoard (TMDSEVM3517)";
>> +	compatible = "ti,am3517-craneboard", "ti,am3517", "ti,omap3";
>> +
>> +	memory {
>> +		device_type = "memory";
>> +		reg = <0x80000000 0x10000000>;	/* 256 MB */
>> +	};
>> +
>> +	vbat: fixedregulator at 0 {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "vbat";
>> +		regulator-min-microvolt = <5000000>;
>> +		regulator-max-microvolt = <5000000>;
>> +		regulator-boot-on;
>> +	};
>> +};
>> +
>> +&davinci_emac {
>> +	status = "okay";
>> +};
>> +
>> +&davinci_mdio {
>> +	status = "okay";
>> +};
>> +
>> +&i2c1 {
>> +	clock-frequency = <2600000>;
>> +
>> +	tps: tps at 2d {
>> +		reg = <0x2d>;
>> +	};
>> +};
>> +
>> +&i2c2 {
>> +	clock-frequency = <400000>;
>> +	/* goes to expansion connector */
>> +	status = "disabled";
>> +};
>> +
>> +&i2c3 {
>> +	clock-frequency = <400000>;
>> +	/* goes to expansion connector */
>> +	status = "disabled";
>> +};
>> +
>> +&mmc1 {
>> +	vmmc-supply = <&vdd2_reg>;
>> +	bus-width = <8>;
>> +};
>> +
>> +&mmc2 {
>> +	/* goes to expansion connector */
>> +	status = "disabled";
>> +};
>> +
>> +&mmc3 {
>> +	/* goes to expansion connector */
>> +	status = "disabled";
>> +};
>> +
>> +#include "tps65910.dtsi"
>> +
>> +&omap3_pmx_core {
>> +	tps_pins: pinmux_tps_pins {
>> +		pinctrl-single,pins = <
>> +			0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */
>> +		>;
>> +	};
>> +};
>> +
>> +&tps {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&tps_pins>;
>> +
>> +	interrupts = <7>; /* SYS_NIRQ cascaded to intc */
>> +	interrupt-parent = <&intc>;
>> +
>> +	ti,en-ck32k-xtal;
>> +
>> +	vcc1-supply = <&vbat>;
>> +	vcc2-supply = <&vbat>;
>> +	vcc3-supply = <&vbat>;
>> +	vcc4-supply = <&vbat>;
>> +	vcc5-supply = <&vbat>;
>> +	vcc6-supply = <&vbat>;
>> +	vcc7-supply = <&vbat>;
>> +	vccio-supply = <&vbat>;
>> +
>> +	regulators {
>> +		vrtc_reg: regulator at 0 {
>> +			regulator-always-on;
>> +		};
>> +
>> +		vio_reg: regulator at 1 {
>> +			regulator-always-on;
>> +		};
>> +
>> +		/*
>> +		 * Unused:
>> +		 * VDIG1=2.7V,300mA max
>> +		 * VDIG2=1.8V,300mA max
>> +		 */
>> +
>> +		vpll_reg: regulator at 7 {
>> +			/* VDDS_DPLL_1V8 */
>> +			regulator-min-microvolt = <1800000>;
>> +			regulator-max-microvolt = <1800000>;
>> +			regulator-always-on;
>> +		};
>> +
>> +		vaux1_reg: regulator at 9 {
>> +			/* VDDS_SRAM_1V8 */
>> +			regulator-min-microvolt = <1800000>;
>> +			regulator-max-microvolt = <1800000>;
>> +			regulator-always-on;
>> +		};
>> +
>> +		vaux2_reg: regulator at 10 {
>> +			/* VDDA1P8V_USBPHY */
>> +			regulator-min-microvolt = <1800000>;
>> +			regulator-max-microvolt = <1800000>;
>> +			regulator-always-on;
>> +		};
>> +
>> +		/* VAUX33 unused */
>> +
>> +		vdac_reg: regulator at 8 {
>> +			/* VDDA_DAC_1V8 */
>> +			regulator-min-microvolt = <1800000>;
>> +			regulator-max-microvolt = <1800000>;
>> +			regulator-always-on;
>> +		};
>> +
>> +		vmmc_reg: regulator at 12 {
>> +			/* VDDA3P3V_USBPHY */
>> +			regulator-min-microvolt = <3300000>;
>> +			regulator-max-microvolt = <3300000>;
>> +			regulator-always-on;
>> +		};
>> +
>> +		vdd1_reg: regulator at 2 {
>> +			/* VDD_CORE */
>> +			regulator-name = "vdd_core";
>> +			regulator-min-microvolt = <1200000>;
>> +			regulator-max-microvolt = <1200000>;
>> +			regulator-boot-on;
>> +			regulator-always-on;
>> +		};
>> +
>> +		vdd2_reg: regulator at 3 {
>> +			/* VDDSHV_3V3 */
>> +			regulator-name = "vdd_shv";
>> +			regulator-min-microvolt = <3300000>;
>> +			regulator-max-microvolt = <3300000>;
>> +			regulator-always-on;
>> +		};
>> +
>> +		/* VDD3 unused */
>> +	};
>> +};
>>
>
>


-- 
Beno?t Cousson
BayLibre
Embedded Linux Technology Lab
www.baylibre.com

  reply	other threads:[~2013-12-18 16:57 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-12-09 21:55 [PATCH] ARM: dts: Add basic devices for AM3517-craneboard Nishanth Menon
2013-12-09 21:55 ` Nishanth Menon
2013-12-17 19:45 ` Nishanth Menon
2013-12-17 19:45   ` Nishanth Menon
2013-12-18 16:57   ` Benoit Cousson [this message]
2013-12-18 16:57     ` Benoit Cousson
2013-12-18 17:02     ` Nishanth Menon
2013-12-18 17:02       ` Nishanth Menon
2013-12-18 17:16       ` Benoit Cousson
2013-12-18 17:16         ` Benoit Cousson
2014-01-20 16:43         ` Nishanth Menon
2014-01-20 16:43           ` Nishanth Menon
2014-01-29 13:30           ` Nishanth Menon
2014-01-29 13:30             ` Nishanth Menon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=52B1D3DC.1010304@baylibre.com \
    --to=bcousson@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.