Mounting error after upgrading to wheezy - Changes in mount.cifs from 4.5 to 5.5?

Mounting error after upgrading to wheezy - Changes in mount.cifs from 4.5 to 5.5?

[Philipp Flesch]

Hi from Munich,
we have some special issues with the current cifs-utils (5.5) in 
Debian Wheezy.

A lot of our (raw) logfiles are stored on a Windows 2008 R2 
fileserver, while we use Debian to generate the reports.

The share is available as
\\fs01\Share

while the logfiles can be found in special subdirs
DepartmentA\Stats

We use a seperate user "stats_user" to access the files. This user has 
no "listing-rights“ above the final "\Stats" directory.

Using Windows 7, everything works fine...
\\fs01\Share\DepartmentA\Stats can be directly mounted to an local 
drive...

Using cifs-utils (4.5) in Squeeze everything works fine, too!
mount -t cifs //fs01/Share/DepartmentA/stats /mnt/DepartmentA_stats -o 
user=stats_user,domain=xy,password='xyz'
makes all files accessible from Debian.

Using the same mount-command with the same user, we got a "permission 
denied".
Retrying with a default-user (with listing-rights) the subdirectory is 
mounted without any errors...

Are there any big changes between 4.5 and 5.5 which can cause this 
error? Is there a solution, to avoid the issue?

Thank you very much

Philipp

Re: Mounting error after upgrading to wheezy - Changes in mount.cifs from 4.5 to 5.5?

[Jeff Layton]

On Wed, 18 Dec 2013 14:10:17 +0100
Philipp Flesch <philipp-3cc/OM5pcIkb1SvskN2V4Q@public.gmane.org> wrote:

> Hi from Munich,
> we have some special issues with the current cifs-utils (5.5) in 
> Debian Wheezy.
> 
> A lot of our (raw) logfiles are stored on a Windows 2008 R2 
> fileserver, while we use Debian to generate the reports.
> 
> The share is available as
> \\fs01\Share
> 
> while the logfiles can be found in special subdirs
> DepartmentA\Stats
> 
> We use a seperate user "stats_user" to access the files. This user has 
> no "listing-rights“ above the final "\Stats" directory.
> 
> Using Windows 7, everything works fine...
> \\fs01\Share\DepartmentA\Stats can be directly mounted to an local 
> drive...
> 
> Using cifs-utils (4.5) in Squeeze everything works fine, too!
> mount -t cifs //fs01/Share/DepartmentA/stats /mnt/DepartmentA_stats -o 
> user=stats_user,domain=xy,password='xyz'
> makes all files accessible from Debian.
> 
> Using the same mount-command with the same user, we got a "permission 
> denied".
> Retrying with a default-user (with listing-rights) the subdirectory is 
> mounted without any errors...
> 
> Are there any big changes between 4.5 and 5.5 which can cause this 
> error? Is there a solution, to avoid the issue?
> 
> Thank you very much
> 
> Philipp
> 

More likely, a change to the kernel and not cifs-utils is causing this
for you. What kernels do your working and non-working configs have?
Does it work if you mount with sec=ntlm ?

-- 
Jeff Layton <jlayton-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>

Re: Mounting error after upgrading to wheezy - Changes in mount.cifs from 4.5 to 5.5?

[Philipp Flesch]

Hi Jeff,
> More likely, a change to the kernel and not cifs-utils is causing this
> for you. What kernels do your working and non-working configs have?
(working) squeeze --> 2.6.32-5-686-bigmem
(non-working) wheezy --> 3.2.0-4-686-pae

> Does it work if you mount with sec=ntlm ?
>
sec causes same error ...


Greetings

Philipp

Re: Mounting error after upgrading to wheezy - Changes in mount.cifs from 4.5 to 5.5?

[Pierre Frenkiel]

On Wed, 18 Dec 2013, Philipp Flesch wrote:

> Hi Jeff,
>> More likely, a change to the kernel and not cifs-utils is causing this
>> for you. What kernels do your working and non-working configs have?
> (working) squeeze --> 2.6.32-5-686-bigmem
> (non-working) wheezy --> 3.2.0-4-686-pae
>
>> Does it work if you mount with sec=ntlm ?
>> 
> sec causes same error ...

   hi,
   I just see this mail now, coming back home...
   I had a similar problem when kernel change from 3.2 to 3.10.
   and found that the 3 following commands work:

      mount -t cifs -o sec=none //wehd/hdd /d6
      mount -t cifs -o "guest,sec=ntlm" //wehd/hdd /d6
      mount -t cifs -o "guest,sec=ntlmv2" //wehd/hdd /d6

best regards,
-- 
Pierre Frenkiel

Re: Mounting error after upgrading to wheezy - Changes in mount.cifs from 4.5 to 5.5?

[Steve French]

I doubt that the sec=ntlm would make much of a difference but would be
interesting to see what the access denied is coming back on - since
from what you describe listing the contents of the root directory of
the share should be permitted to both users so this is not an access
denied on top of prefixpath issue as we had seen a few years ago.

On Wed, Dec 18, 2013 at 7:10 AM, Philipp Flesch <philipp-3cc/OM5pcIkb1SvskN2V4Q@public.gmane.org> wrote:
> Hi from Munich,
> we have some special issues with the current cifs-utils (5.5) in Debian
> Wheezy.
>
> A lot of our (raw) logfiles are stored on a Windows 2008 R2 fileserver,
> while we use Debian to generate the reports.
>
> The share is available as
> \\fs01\Share
>
> while the logfiles can be found in special subdirs
> DepartmentA\Stats
>
> We use a seperate user "stats_user" to access the files. This user has no
> "listing-rights“ above the final "\Stats" directory.
>
> Using Windows 7, everything works fine...
> \\fs01\Share\DepartmentA\Stats can be directly mounted to an local drive...
>
> Using cifs-utils (4.5) in Squeeze everything works fine, too!
> mount -t cifs //fs01/Share/DepartmentA/stats /mnt/DepartmentA_stats -o
> user=stats_user,domain=xy,password='xyz'
> makes all files accessible from Debian.
>
> Using the same mount-command with the same user, we got a "permission
> denied".
> Retrying with a default-user (with listing-rights) the subdirectory is
> mounted without any errors...
>
> Are there any big changes between 4.5 and 5.5 which can cause this error? Is
> there a solution, to avoid the issue?
>
> Thank you very much
>
> Philipp
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-cifs" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html



-- 
Thanks,

Steve

Re: Mounting error after upgrading to wheezy - Changes in mount.cifs from 4.5 to 5.5?

[Philipp Flesch]

Hi Steve,

Am 18.12.2013 17:51, schrieb Steve French:
> I doubt that the sec=ntlm would make much of a difference but would be
> interesting to see what the access denied is coming back on - since
> from what you describe listing the contents of the root directory of
> the share should be permitted to both users so this is not an access
> denied on top of prefixpath issue as we had seen a few years ago.
Sorry, but perhaps I described the share-configuration not exact enough.
listing the contents is only allowed in the final (second) subdirectory, 
but not in the root of the share and not in the first subdirectory:

no    listing allowed        \\fs01\Share
no    listing allowed         \\fs01\Share\DepartmentA
         listing allowed         \\fs01\Share\DepartmentA\Stats

Greetings

Philipp