Re: [PATCH 0/5] arm: shmobile: Lager Add USB and SATA support

[Valentine <valentine.barshak@cogentembedded.com>]

On 12/18/2013 04:44 PM, Valentine Barshak wrote:
> I've decided to bundle USB and SATA patches together, since I've done SATA on top of USB.
> Most of the SATA/USBHS/PCI USB host support patches for Lager are available in the respective
> susbsystem git trees (for 3.14) but are still missing from the Renesas tree.
>
> So, in order to test these, the following patches from other subsystem trees are needed:
> USB:
> https://git.kernel.org/cgit/linux/kernel/git/helgaas/pci.git/commit/?h=pci/host-rcar&idû178d8b2fab3f2a9f203c13ffe80cfd6e01bdf1
> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?idÈba8115a21226fba3211085f570b128fa271e31
> https://git.kernel.org/cgit/linux/kernel/git/balbi/usb.git/commit/?h=next&idÃe5d2985ef720cbbdc63546a5c545ac4450d96e
> https://git.kernel.org/cgit/linux/kernel/git/gregkh/usb.git/commit/?h=usb-next&id\x103e127d1f8f985e8a662da6537ebc5e08902ee3
> https://git.kernel.org/cgit/linux/kernel/git/gregkh/usb.git/commit/?h=usb-next&id\x1ae5799ef63176cc75ec10e545cb65f620a82747
>
> SATA:
> https://git.kernel.org/cgit/linux/kernel/git/tj/libata.git/commit/?h=for-3.14&idæ7adb4e669db834c1f95cbdf99bb4e9ec8455b3
>
> The USB channel 0 (CN6) is configured as PCI USB host if USB_RENESAS_USBHS_UDC is disabled.
> Otherwise it is configured as USBHS device.
> Please note that the following switches have to be set correctly as well:
> PCI USB Host: SW5 - pin1;    SW6 - pin1
> USBHS device: SW5 - neutral; SW6 - pin3
>
> Valentine Barshak (5):
>    arm: shmobile: r8a7790: Add PCI USB host clock support
>    arm: shmobile: r8a7790: Add SATA clock
>    arm: shmobile: lager: Add USBHS support
>    arm: shmobile: lager: Add internal PCI support
>    arm: shmobile: lager: Add SATA support
>
>   arch/arm/mach-shmobile/board-lager.c   | 203 +++++++++++++++++++++++++++++++++
>   arch/arm/mach-shmobile/clock-r8a7790.c |  25 +++-
>   2 files changed, 227 insertions(+), 1 deletion(-)
>

I've rebased the series on top of the latest renesas-devel-v3.13-rc4-20131219 branch
and split it into separate USB and SATA ones. The SATA support was posted yesterday.
I'll resend the USB part for both Lager/Koelsch boards in a bit.

Thanks,
Val.