All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lokesh Vutla <lokeshvutla@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RFC][PATCH 2/7] ARM: OMAP5: Rename to ti_omap5_common.h
Date: Mon, 23 Dec 2013 17:08:16 +0530	[thread overview]
Message-ID: <52B820A8.6070507@ti.com> (raw)
In-Reply-To: <1386361824-21900-3-git-send-email-eballetbo@gmail.com>

On Saturday 07 December 2013 02:00 AM, Enric Balletbo i Serra wrote:
> Follow the pattern ti_<processor family>_common.h used by other TI processors
> to be coherent. So just rename omap5_common.h to ti_omap5_common.h.
Reviewed-by:  Lokesh Vutla <lokeshvutla@ti.com>

Thanks and regards,
Lokesh
> 
> Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com>
> ---
>  include/configs/dra7xx_evm.h                          | 4 ++--
>  include/configs/omap5_uevm.h                          | 4 ++--
>  include/configs/{omap5_common.h => ti_omap5_common.h} | 6 +++---
>  3 files changed, 7 insertions(+), 7 deletions(-)
>  rename include/configs/{omap5_common.h => ti_omap5_common.h} (97%)
> 
> diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
> index 8a69c7d..fdd5f19 100644
> --- a/include/configs/dra7xx_evm.h
> +++ b/include/configs/dra7xx_evm.h
> @@ -4,7 +4,7 @@
>   * Lokesh Vutla	  <lokeshvutla@ti.com>
>   *
>   * Configuration settings for the TI DRA7XX board.
> - * See omap5_common.h for omap5 common settings.
> + * See ti_omap5_common.h for omap5 common settings.
>   *
>   * SPDX-License-Identifier:	GPL-2.0+
>   */
> @@ -34,7 +34,7 @@
>  
>  #define CONFIG_SYS_OMAP_ABE_SYSCK
>  
> -#include <configs/omap5_common.h>
> +#include <configs/ti_omap5_common.h>
>  
>  /* CPSW Ethernet */
>  #define CONFIG_CMD_NET			/* 'bootp' and 'tftp' */
> diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
> index 4d3a800..1cc4f47 100644
> --- a/include/configs/omap5_uevm.h
> +++ b/include/configs/omap5_uevm.h
> @@ -4,7 +4,7 @@
>   * Sricharan R	  <r.sricharan@ti.com>
>   *
>   * Configuration settings for the TI EVM5430 board.
> - * See omap5_common.h for omap5 common settings.
> + * See ti_omap5_common.h for omap5 common settings.
>   *
>   * SPDX-License-Identifier:	GPL-2.0+
>   */
> @@ -17,7 +17,7 @@
>  	"uuid_disk=${uuid_gpt_disk};" \
>  	"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
>  
> -#include <configs/omap5_common.h>
> +#include <configs/ti_omap5_common.h>
>  
>  #define CONFIG_CONS_INDEX		3
>  #define CONFIG_SYS_NS16550_COM3		UART3_BASE
> diff --git a/include/configs/omap5_common.h b/include/configs/ti_omap5_common.h
> similarity index 97%
> rename from include/configs/omap5_common.h
> rename to include/configs/ti_omap5_common.h
> index c7fa37e..4f34dcf 100644
> --- a/include/configs/omap5_common.h
> +++ b/include/configs/ti_omap5_common.h
> @@ -14,8 +14,8 @@
>   * http://www.ti.com/product/omap5432
>   */
>  
> -#ifndef __CONFIG_OMAP5_COMMON_H
> -#define __CONFIG_OMAP5_COMMON_H
> +#ifndef __CONFIG_TI_OMAP5_COMMON_H
> +#define __CONFIG_TI_OMAP5_COMMON_H
>  
>  #define CONFIG_OMAP54XX
>  #define CONFIG_DISPLAY_CPUINFO
> @@ -146,4 +146,4 @@
>  #define CONFIG_SPL_DISPLAY_PRINT
>  #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
>  
> -#endif /* __CONFIG_OMAP5_COMMON_H */
> +#endif /* __CONFIG_TI_OMAP5_COMMON_H */
> 

  reply	other threads:[~2013-12-23 11:38 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-12-06 20:30 [U-Boot] [RFC][PATCH 0/7] TI: OMAP3: Use common config file Enric Balletbo i Serra
2013-12-06 20:30 ` [U-Boot] [RFC][PATCH 1/7] ARM: OMAP4: Rename to ti_omap4_common.h Enric Balletbo i Serra
2013-12-23 11:34   ` Lokesh Vutla
2013-12-06 20:30 ` [U-Boot] [RFC][PATCH 2/7] ARM: OMAP5: Rename to ti_omap5_common.h Enric Balletbo i Serra
2013-12-23 11:38   ` Lokesh Vutla [this message]
2013-12-06 20:30 ` [U-Boot] [RFC][PATCH 3/7] TI: armv7: Move ELM support to SoC configuration file Enric Balletbo i Serra
2013-12-23 11:41   ` Lokesh Vutla
2013-12-06 20:30 ` [U-Boot] [RFC][PATCH 4/7] TI: armv7: Do not define the number DRAM banks if is already defined Enric Balletbo i Serra
2013-12-06 20:30 ` [U-Boot] [RFC][PATCH 5/7] ARM: OMAP3: Rename OMAP3_PUBLIC_SRAM_* to NON_SECURE_SRAM_* Enric Balletbo i Serra
2013-12-06 20:30 ` [U-Boot] [RFC][PATCH 6/7] TI: OMAP3: Create common config files for TI OMAP3 platforms Enric Balletbo i Serra
2013-12-06 20:30 ` [U-Boot] [RFC][PATCH 7/7] OMAP3: igep00x0: Convert to ti_omap3_common.h Enric Balletbo i Serra
2013-12-23 11:11 ` [U-Boot] [RFC][PATCH 0/7] TI: OMAP3: Use common config file Enric Balletbo Serra
2014-01-06 17:36   ` Tom Rini
2014-01-24  8:45     ` Enric Balletbo Serra
2014-01-24 13:37       ` Tom Rini
2014-01-24 14:13         ` Enric Balletbo Serra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=52B820A8.6070507@ti.com \
    --to=lokeshvutla@ti.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.