From: Lokesh Vutla <lokeshvutla@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RFC][PATCH 3/7] TI: armv7: Move ELM support to SoC configuration file.
Date: Mon, 23 Dec 2013 17:11:26 +0530 [thread overview]
Message-ID: <52B82166.7080506@ti.com> (raw)
In-Reply-To: <1386361824-21900-4-git-send-email-eballetbo@gmail.com>
On Saturday 07 December 2013 02:00 AM, Enric Balletbo i Serra wrote:
> The ELM hardware engine wihich is used for ECC error detections is not present
> on OMAP3 SoC, so move the CONFIG_SPL_NAND_AM33XX_BCH from ti_armv7_common.h to
> SoC configuration file.
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Thanks and regards,
Lokesh
>
> Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com>
> ---
> include/configs/ti_am335x_common.h | 4 ++++
> include/configs/ti_armv7_common.h | 1 -
> include/configs/ti_omap4_common.h | 4 ++++
> include/configs/ti_omap5_common.h | 4 ++++
> 4 files changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h
> index 10fe47f..cddddb0 100644
> --- a/include/configs/ti_am335x_common.h
> +++ b/include/configs/ti_am335x_common.h
> @@ -72,6 +72,10 @@
> #define CONFIG_SKIP_LOWLEVEL_INIT
> #endif
>
> +#ifdef CONFIG_NAND
> +#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */
> +#endif
> +
> /* Now bring in the rest of the common code. */
> #include <configs/ti_armv7_common.h>
>
> diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
> index 99b60fc..f4e42ef 100644
> --- a/include/configs/ti_armv7_common.h
> +++ b/include/configs/ti_armv7_common.h
> @@ -237,7 +237,6 @@
> #define CONFIG_SPL_BOARD_INIT
>
> #ifdef CONFIG_NAND
> -#define CONFIG_SPL_NAND_AM33XX_BCH /* OMAP4 and later ELM support */
> #define CONFIG_SPL_NAND_SUPPORT
> #define CONFIG_SPL_NAND_BASE
> #define CONFIG_SPL_NAND_DRIVERS
> diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h
> index bce32d6..815aaf5 100644
> --- a/include/configs/ti_omap4_common.h
> +++ b/include/configs/ti_omap4_common.h
> @@ -154,4 +154,8 @@
> #define CONFIG_SPL_DISPLAY_PRINT
> #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
>
> +#ifdef CONFIG_NAND
> +#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */
> +#endif
> +
> #endif /* __CONFIG_TI_OMAP4_COMMON_H */
> diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h
> index 4f34dcf..7b10fbd 100644
> --- a/include/configs/ti_omap5_common.h
> +++ b/include/configs/ti_omap5_common.h
> @@ -146,4 +146,8 @@
> #define CONFIG_SPL_DISPLAY_PRINT
> #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
>
> +#ifdef CONFIG_NAND
> +#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */
> +#endif
> +
> #endif /* __CONFIG_TI_OMAP5_COMMON_H */
>
next prev parent reply other threads:[~2013-12-23 11:41 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-06 20:30 [U-Boot] [RFC][PATCH 0/7] TI: OMAP3: Use common config file Enric Balletbo i Serra
2013-12-06 20:30 ` [U-Boot] [RFC][PATCH 1/7] ARM: OMAP4: Rename to ti_omap4_common.h Enric Balletbo i Serra
2013-12-23 11:34 ` Lokesh Vutla
2013-12-06 20:30 ` [U-Boot] [RFC][PATCH 2/7] ARM: OMAP5: Rename to ti_omap5_common.h Enric Balletbo i Serra
2013-12-23 11:38 ` Lokesh Vutla
2013-12-06 20:30 ` [U-Boot] [RFC][PATCH 3/7] TI: armv7: Move ELM support to SoC configuration file Enric Balletbo i Serra
2013-12-23 11:41 ` Lokesh Vutla [this message]
2013-12-06 20:30 ` [U-Boot] [RFC][PATCH 4/7] TI: armv7: Do not define the number DRAM banks if is already defined Enric Balletbo i Serra
2013-12-06 20:30 ` [U-Boot] [RFC][PATCH 5/7] ARM: OMAP3: Rename OMAP3_PUBLIC_SRAM_* to NON_SECURE_SRAM_* Enric Balletbo i Serra
2013-12-06 20:30 ` [U-Boot] [RFC][PATCH 6/7] TI: OMAP3: Create common config files for TI OMAP3 platforms Enric Balletbo i Serra
2013-12-06 20:30 ` [U-Boot] [RFC][PATCH 7/7] OMAP3: igep00x0: Convert to ti_omap3_common.h Enric Balletbo i Serra
2013-12-23 11:11 ` [U-Boot] [RFC][PATCH 0/7] TI: OMAP3: Use common config file Enric Balletbo Serra
2014-01-06 17:36 ` Tom Rini
2014-01-24 8:45 ` Enric Balletbo Serra
2014-01-24 13:37 ` Tom Rini
2014-01-24 14:13 ` Enric Balletbo Serra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52B82166.7080506@ti.com \
--to=lokeshvutla@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.