From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Martin Jansa <martin.jansa@gmail.com>
Cc: "meta-freescale@yoctoproject.org"
<meta-freescale@yoctoproject.org>,
poky@yoctoproject.org
Subject: Re: X11 incompatibilities using meta-oe with poky
Date: Sat, 28 Dec 2013 12:43:31 +0100 [thread overview]
Message-ID: <52BEB963.2030901@free-electrons.com> (raw)
In-Reply-To: <20131228112839.GZ3706@jama>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
On 28/12/2013 12:28, Martin Jansa wrote:
> I'm not using matchbox and I'm using only xserver-common, this fix is to
> start xinput-calibrator in correct location.
>
> You can get rid of x11-common by setting:
> VIRTUAL-RUNTIME_xserver_common = "xserver-common"
Still not enough, the Xsession from xserver-common will make the board
hang in 80matchboxkeyboard.shbg the main issue I see is that a lot of
recipes are providing Xsession scripts for the x11-common's Xsession but
at the end, we are installing Xsession from xserver-common. You kind of
hacked around that by renaming all the scripts to .sh.
I think we should get rid of kdrive in poky and only use xserver-common.
Or, for each recipe installing an Xsession script, we should have a look
at whether it is for x11-common or xserver-common. In that case, we
havfe to make the conflicting work.
I believe your patch is not really solving the issue and I you want, I
can work on that.
- --
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=u124
-----END PGP SIGNATURE-----
WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Martin Jansa <martin.jansa@gmail.com>
Cc: "meta-freescale@yoctoproject.org"
<meta-freescale@yoctoproject.org>,
poky@yoctoproject.org
Subject: Re: [poky] X11 incompatibilities using meta-oe with poky
Date: Sat, 28 Dec 2013 12:43:31 +0100 [thread overview]
Message-ID: <52BEB963.2030901@free-electrons.com> (raw)
In-Reply-To: <20131228112839.GZ3706@jama>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
On 28/12/2013 12:28, Martin Jansa wrote:
> I'm not using matchbox and I'm using only xserver-common, this fix is to
> start xinput-calibrator in correct location.
>
> You can get rid of x11-common by setting:
> VIRTUAL-RUNTIME_xserver_common = "xserver-common"
Still not enough, the Xsession from xserver-common will make the board
hang in 80matchboxkeyboard.shbg the main issue I see is that a lot of
recipes are providing Xsession scripts for the x11-common's Xsession but
at the end, we are installing Xsession from xserver-common. You kind of
hacked around that by renaming all the scripts to .sh.
I think we should get rid of kdrive in poky and only use xserver-common.
Or, for each recipe installing an Xsession script, we should have a look
at whether it is for x11-common or xserver-common. In that case, we
havfe to make the conflicting work.
I believe your patch is not really solving the issue and I you want, I
can work on that.
- --
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=u124
-----END PGP SIGNATURE-----
next prev parent reply other threads:[~2013-12-28 11:49 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-27 21:22 X11 incompatibilities using meta-oe with poky Alexandre Belloni
2013-12-28 8:32 ` Martin Jansa
2013-12-28 8:32 ` [poky] " Martin Jansa
2013-12-28 10:19 ` Alexandre Belloni
2013-12-28 10:19 ` [poky] " Alexandre Belloni
2013-12-28 11:28 ` Martin Jansa
2013-12-28 11:28 ` [poky] " Martin Jansa
2013-12-28 11:43 ` Alexandre Belloni [this message]
2013-12-28 11:43 ` Alexandre Belloni
2013-12-28 12:07 ` Martin Jansa
2013-12-28 12:07 ` [poky] " Martin Jansa
2013-12-28 13:00 ` Alexandre Belloni
2013-12-28 13:00 ` [poky] " Alexandre Belloni
2013-12-30 5:09 ` Otavio Salvador
2013-12-31 10:42 ` [meta-freescale] " Alexandre Belloni
2013-12-31 10:42 ` [poky] " Alexandre Belloni
2013-12-31 11:42 ` [meta-freescale] " Martin Jansa
2013-12-31 11:42 ` [poky] " Martin Jansa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52BEB963.2030901@free-electrons.com \
--to=alexandre.belloni@free-electrons.com \
--cc=martin.jansa@gmail.com \
--cc=meta-freescale@yoctoproject.org \
--cc=poky@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.