* [GIT PULL FOR v3.14] adv fixes and feature enhancements
@ 2014-01-02 12:47 Hans Verkuil
0 siblings, 0 replies; only message in thread
From: Hans Verkuil @ 2014-01-02 12:47 UTC (permalink / raw)
To: Linux Media Mailing List
Mauro,
Please pull this patch series for 3.14.
It's rebased but otherwise unchanged from the last review patch series:
http://www.spinics.net/lists/linux-media/msg70819.html
Happy New Year!
Regards,
Hans
The following changes since commit 7d459937dc09bb8e448d9985ec4623779427d8a5:
[media] Add driver for Samsung S5K5BAF camera sensor (2013-12-21 07:01:36 -0200)
are available in the git repository at:
git://linuxtv.org/hverkuil/media_tree.git adv
for you to fetch changes up to 4644c02f7befe821bdd0d20b33d6a0de7b59cfae:
adv7842: add drive strength enum and sync names with adv7604. (2014-01-02 13:44:30 +0100)
----------------------------------------------------------------
Hans Verkuil (6):
adv7604: adv7604_s_register clean up.
adv7604: initialize timings to CEA 640x480p59.94.
adv7842: support YCrCb analog input, receive CEA formats as RGB on VGA input
adv7842: set LLC DLL phase from platform_data
adv7842: initialize timings to CEA 640x480p59.94.
adv7842: add drive strength enum and sync names with adv7604.
Martin Bugge (27):
ad9389b: whitespace changes to improve readability
ad9389b: remove rx-sense irq dependency
ad9389b: retry setup if the state is inconsistent
adv7511: disable register reset by HPD
adv7511: add VIC and audio CTS/N values to log_status
adv7511: verify EDID header
adv7604: support 1366x768 DMT Reduced Blanking
adv7604: set restart_stdi_once flag when signal is lost.
adv7604: sync polarities from platform data
adv7842: Re-worked query_dv_timings()
adv7842: corrected setting of cp-register 0x91 and 0x8f.
adv7842: properly enable/disable the irqs.
adv7842: save platform data in state struct
adv7842: added DE vertical position in SDP-io-sync
adv7842: set defaults spa-location.
adv7842: 625/525 line standard jitter fix.
adv7842: set default input in platform-data
adv7842: increase wait time.
adv7842: clear edid, if no edid just disable Edid-DDC access
adv7842: restart STDI once if format is not found.
adv7842: support g_edid ioctl
adv7842: i2c dummy clients registration.
adv7842: enable HDMI/DVI mode irq
adv7842: composite sd-ram test, clear timings before setting.
adv7842: obtain free-run mode from the platform_data.
adv7842: Composite sync adjustment
adv7842: return 0 if no change in s_dv_timings
Mats Randgaard (16):
ad9389b: verify EDID header
adv7604: add support for all the digital input ports
adv7604: Receive CEA formats as RGB on VGA (RGB) input
adv7604: select YPbPr if RGB_RANGE_FULL/LIMITED is set for VGA_COMP inputs
adv7604: set CEC address (SPA) in EDID
adv7604: improve EDID handling
adv7604: remove connector type. Never used for anything useful.
adv7604: return immediately if the new input is equal to what is configured
adv7604: remove debouncing of ADV7604_FMT_CHANGE events
adv7604: improve HDMI audio handling
adv7604: adjust gain and offset for DVI-D signals
adv7604: Enable HDMI_MODE interrupt
adv7604: return immediately if the new timings are equal to what is configured
adv7842: remove connector type. Never used for anything useful
adv7842: Use defines to select EDID port
adv7842: mute audio before switching inputs to avoid noise/pops
Mikhail Khelik (1):
adv7604: add hdmi driver strength adjustment
arch/blackfin/mach-bf609/boards/ezkit.c | 4 +-
drivers/media/i2c/ad9389b.c | 277 +++++++++++++++++++-----------------
drivers/media/i2c/adv7511.c | 64 +++++++--
drivers/media/i2c/adv7604.c | 645 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++--------------------------
drivers/media/i2c/adv7842.c | 646 +++++++++++++++++++++++++++++++++++++++++++++++++++++-------------------------------
include/media/adv7604.h | 38 +++--
include/media/adv7842.h | 59 ++++++--
7 files changed, 1135 insertions(+), 598 deletions(-)
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2014-01-02 12:48 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-01-02 12:47 [GIT PULL FOR v3.14] adv fixes and feature enhancements Hans Verkuil
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.