Call for demos

Call for demos

[Philip Balister]

I was thinking about demos for FOSDEM (thanks to the people that have
already offered some) and realized I should reach out to the broader
community.

OpenEmbedded has a stand (table) at FOSDEM to show of the project to the
oen source community. Typically, whoever comes to FOSDEM brings whatever
cool thing they are working on with OE at the time. I'd liek to try and
get some more diverse hardware on display to show how flexible the
project is.

A good demo should be visually interesting. Blinking lights/ LCD panels
etc. A few static seriously embedded things are fine, but people love to
see blinking lights :)

Long term, I'd like to build up a set of physically small demos we can
pass around as people attend various conferences to show off
OpenEmbedded (and the Yocto Project) capabilities.

What I am looking for is boards with good BSP layers that are well
supported (preferably by the manufacturer in some way) and have an image
that is easy for people to reproduce. (Basically, we should show stuff
that people can go home, order hardware, and build the demo image
without a lot of tweaking).

So what I am looking for is:

1) Donations of hardware we can demo
2) Software support for the hardware

I'd like to use this as a way for us to show support for vendors that
support us.

Philip

Re: Call for demos

[eric]

On 01/02/14 00:06, Philip Balister wrote:
> I was thinking about demos for FOSDEM (thanks to the people that have
> already offered some) and realized I should reach out to the broader
> community.
>
> OpenEmbedded has a stand (table) at FOSDEM to show of the project to the
> oen source community. Typically, whoever comes to FOSDEM brings whatever
> cool thing they are working on with OE at the time. I'd liek to try and
> get some more diverse hardware on display to show how flexible the
> project is.
>
> A good demo should be visually interesting. Blinking lights/ LCD panels
> etc. A few static seriously embedded things are fine, but people love to
> see blinking lights :)
>
> Long term, I'd like to build up a set of physically small demos we can
> pass around as people attend various conferences to show off
> OpenEmbedded (and the Yocto Project) capabilities.
>
> What I am looking for is boards with good BSP layers that are well
> supported (preferably by the manufacturer in some way) and have an image
> that is easy for people to reproduce. (Basically, we should show stuff
> that people can go home, order hardware, and build the demo image
> without a lot of tweaking).
>
> So what I am looking for is:
>
> 1) Donations of hardware we can demo
> 2) Software support for the hardware
i would like to bring in an ouya game console ( need and hdmi for 
monitor it )
and maybe ( depends on if i get repaired the display glass right in 
time) an  asus tf201  transformer.

> I'd like to use this as a way for us to show support for vendors that
> support us.
>
> Philip
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.openembedded.org/mailman/listinfo/openembedded-devel
>

Re: Call for demos

[Alex J Lennon]

On 02/01/2014 00:06, Philip Balister wrote:
> I was thinking about demos for FOSDEM (thanks to the people that have
> already offered some) and realized I should reach out to the broader
> community.
>
> OpenEmbedded has a stand (table) at FOSDEM to show of the project to the
> oen source community. Typically, whoever comes to FOSDEM brings whatever
> cool thing they are working on with OE at the time. I'd liek to try and
> get some more diverse hardware on display to show how flexible the
> project is.
>
> A good demo should be visually interesting. Blinking lights/ LCD panels
> etc. A few static seriously embedded things are fine, but people love to
> see blinking lights :)
>
> Long term, I'd like to build up a set of physically small demos we can
> pass around as people attend various conferences to show off
> OpenEmbedded (and the Yocto Project) capabilities.
>
> What I am looking for is boards with good BSP layers that are well
> supported (preferably by the manufacturer in some way) and have an image
> that is easy for people to reproduce. (Basically, we should show stuff
> that people can go home, order hardware, and build the demo image
> without a lot of tweaking).
>
> So what I am looking for is:
>
> 1) Donations of hardware we can demo
> 2) Software support for the hardware
>
> I'd like to use this as a way for us to show support for vendors that
> support us.

Philip,

The offer I made to bring along a demo still stands -

https://lists.yoctoproject.org/pipermail/yocto/2013-November/017124.html

Somewhat surprised not to have had a response, as I believe this would make
a good demo for the Yocto project (meta-freescale, i.MX6, production 
hardware,
IoT and so forth)

(There may also be a discussion to be had about extended loan of an 
i.MX6 based
system which you may be able to use at various conferences moving forward)

This is still achievable if there is interest, but I'll need to know 
soon or will not
have time to pull things together prior to end of month.

Otherwise, no doubt our paths will cross at FOSDEM :)

Best Regards,

Alex

Re: [oe] Call for demos

[Paul Barker]

On 2 January 2014 00:06, Philip Balister <philip@balister.org> wrote:
>
> So what I am looking for is:
>
> 1) Donations of hardware we can demo
> 2) Software support for the hardware
>

Sadly the hardware I currently have is one-off and I can't afford to
risk breaking it. I'll snap a few photos anyway and bring those along.

Thanks,

-- 
Paul Barker

Email: paul@paulbarker.me.uk
http://www.paulbarker.me.uk

Re: Call for demos

[Paul Barker]

On 2 January 2014 00:06, Philip Balister <philip@balister.org> wrote:
>
> So what I am looking for is:
>
> 1) Donations of hardware we can demo
> 2) Software support for the hardware
>

Sadly the hardware I currently have is one-off and I can't afford to
risk breaking it. I'll snap a few photos anyway and bring those along.

Thanks,

-- 
Paul Barker

Email: paul@paulbarker.me.uk
http://www.paulbarker.me.uk

Re: Call for demos

[Philip Balister]

On 01/02/2014 07:34 AM, Alex J Lennon wrote:
> 
> On 02/01/2014 00:06, Philip Balister wrote:
>> I was thinking about demos for FOSDEM (thanks to the people that have
>> already offered some) and realized I should reach out to the broader
>> community.
>>
>> OpenEmbedded has a stand (table) at FOSDEM to show of the project to the
>> oen source community. Typically, whoever comes to FOSDEM brings whatever
>> cool thing they are working on with OE at the time. I'd liek to try and
>> get some more diverse hardware on display to show how flexible the
>> project is.
>>
>> A good demo should be visually interesting. Blinking lights/ LCD panels
>> etc. A few static seriously embedded things are fine, but people love to
>> see blinking lights :)
>>
>> Long term, I'd like to build up a set of physically small demos we can
>> pass around as people attend various conferences to show off
>> OpenEmbedded (and the Yocto Project) capabilities.
>>
>> What I am looking for is boards with good BSP layers that are well
>> supported (preferably by the manufacturer in some way) and have an image
>> that is easy for people to reproduce. (Basically, we should show stuff
>> that people can go home, order hardware, and build the demo image
>> without a lot of tweaking).
>>
>> So what I am looking for is:
>>
>> 1) Donations of hardware we can demo
>> 2) Software support for the hardware
>>
>> I'd like to use this as a way for us to show support for vendors that
>> support us.
> 
> Philip,
> 
> The offer I made to bring along a demo still stands -
> 
> https://lists.yoctoproject.org/pipermail/yocto/2013-November/017124.html
> 
> Somewhat surprised not to have had a response, as I believe this would make
> a good demo for the Yocto project (meta-freescale, i.MX6, production
> hardware,
> IoT and so forth)

> 
> (There may also be a discussion to be had about extended loan of an
> i.MX6 based
> system which you may be able to use at various conferences moving forward)
> 
> This is still achievable if there is interest, but I'll need to know
> soon or will not
> have time to pull things together prior to end of month.

Thanks Alex, Paul and I did remember your offer and we will be glad to
show it. We would be interested in an extended loan. I am pretty sure we
can use it at at least three conferences and possibly more.

Thanks,

Philip

> 
> Otherwise, no doubt our paths will cross at FOSDEM :)
> 
> Best Regards,
> 
> Alex
> 
> 
> 
> 

Re: Call for demos

[Alex J Lennon]

[-- Attachment #1: Type: text/plain, Size: 3745 bytes --]


On 02/01/2014 13:36, Philip Balister wrote:
> On 01/02/2014 07:34 AM, Alex J Lennon wrote:
>> On 02/01/2014 00:06, Philip Balister wrote:
>>> I was thinking about demos for FOSDEM (thanks to the people that have
>>> already offered some) and realized I should reach out to the broader
>>> community.
>>>
>>> OpenEmbedded has a stand (table) at FOSDEM to show of the project to the
>>> oen source community. Typically, whoever comes to FOSDEM brings whatever
>>> cool thing they are working on with OE at the time. I'd liek to try and
>>> get some more diverse hardware on display to show how flexible the
>>> project is.
>>>
>>> A good demo should be visually interesting. Blinking lights/ LCD panels
>>> etc. A few static seriously embedded things are fine, but people love to
>>> see blinking lights :)
>>>
>>> Long term, I'd like to build up a set of physically small demos we can
>>> pass around as people attend various conferences to show off
>>> OpenEmbedded (and the Yocto Project) capabilities.
>>>
>>> What I am looking for is boards with good BSP layers that are well
>>> supported (preferably by the manufacturer in some way) and have an image
>>> that is easy for people to reproduce. (Basically, we should show stuff
>>> that people can go home, order hardware, and build the demo image
>>> without a lot of tweaking).
>>>
>>> So what I am looking for is:
>>>
>>> 1) Donations of hardware we can demo
>>> 2) Software support for the hardware
>>>
>>> I'd like to use this as a way for us to show support for vendors that
>>> support us.
>> Philip,
>>
>> The offer I made to bring along a demo still stands -
>>
>> https://lists.yoctoproject.org/pipermail/yocto/2013-November/017124.html
>>
>> Somewhat surprised not to have had a response, as I believe this would make
>> a good demo for the Yocto project (meta-freescale, i.MX6, production
>> hardware,
>> IoT and so forth)
>> (There may also be a discussion to be had about extended loan of an
>> i.MX6 based
>> system which you may be able to use at various conferences moving forward)
>>
>> This is still achievable if there is interest, but I'll need to know
>> soon or will not
>> have time to pull things together prior to end of month.
> Thanks Alex, Paul and I did remember your offer and we will be glad to
> show it. We would be interested in an extended loan. I am pretty sure we
> can use it at at least three conferences and possibly more.

Thanks Philip. I'll follow up at this end then.

Alex

> Thanks,
>
> Philip
>
>> Otherwise, no doubt our paths will cross at FOSDEM :)
>>
>> Best Regards,
>>
>> Alex
>>
>>
>>
>>
>

-- 

Dynamic Devices Ltd <http://www.dynamicdevices.co.uk/>

Alex J Lennon / Director
1 Queensway, Liverpool L22 4RA

mobile: +44 (0)7956 668178

Linkedin <http://www.linkedin.com/in/alexjlennon> Skype 
<skype:alexjlennon?add>

This e-mail message may contain confidential or legally privileged 
information and is intended only for the use of the intended 
recipient(s). Any unauthorized disclosure, dissemination, distribution, 
copying or the taking of any action in reliance on the information 
herein is prohibited. E-mails are not secure and cannot be guaranteed to 
be error free as they can be intercepted, amended, or contain viruses. 
Anyone who communicates with us by e-mail is deemed to have accepted 
these risks. Company Name is not responsible for errors or omissions in 
this message and denies any responsibility for any damage arising from 
the use of e-mail. Any opinion and other statement contained in this 
message and any attachment are solely those of the author and do not 
necessarily represent those of the company.


[-- Attachment #2.1: Type: text/html, Size: 6395 bytes --]

[-- Attachment #2.2: ddlogo-4.png --]
[-- Type: image/png, Size: 3997 bytes --]

[-- Attachment #2.3: linkedin.png --]
[-- Type: image/png, Size: 631 bytes --]

[-- Attachment #2.4: skype.png --]
[-- Type: image/png, Size: 800 bytes --]