* [U-Boot] [PATCH v4 19/29] zynq: Add zynq_zc770 xm012 board support [not found] <1387608475-1627-1-git-send-email-jaganna@xilinx.com> @ 2013-12-21 6:47 ` Jagannadha Sutradharudu Teki 2014-01-03 10:12 ` Michal Simek 0 siblings, 1 reply; 5+ messages in thread From: Jagannadha Sutradharudu Teki @ 2013-12-21 6:47 UTC (permalink / raw) To: u-boot ZC770 is a complete development board based on the Xilinx Zynq-7000 All Programmable SoC, similar to ZC70x board but which has four different daughter cards, like XM010, XM011, XM012 and XM013 ZC770 XM012: - 1GB DDR3 - 64MiB Numonyx NOR flash - USB-UART Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Cc: Stefan Roese <sr@denx.de> --- V4: Removed CONFIG_SYS_NO_FLASH in zynq-common.h V3: none V2: none boards.cfg | 1 + boards.cfg | 1 + include/configs/zynq-common.h | 16 ++++++++++++++++ include/configs/zynq_zc770.h | 4 ++++ 3 files changed, 21 insertions(+) diff --git a/boards.cfg b/boards.cfg index fb6b8b0..57a3e5b 100644 --- a/boards.cfg +++ b/boards.cfg @@ -358,6 +358,7 @@ Active arm armv7 zynq xilinx zynq zynq_zc70x - Active arm armv7 zynq xilinx zynq zynq_zed - Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Active arm armv7 zynq xilinx zynq zynq_microzed - Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Active arm armv7 zynq xilinx zynq zynq_zc770_xm010 zynq_zc770:ZC770_XM010 Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com> +Active arm armv7 zynq xilinx zynq zynq_zc770_xm012 zynq_zc770:ZC770_XM012 Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Active arm armv7 zynq xilinx zynq zynq_zc770_xm013 zynq_zc770:ZC770_XM013 Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Active arm armv7:arm720t tegra114 nvidia dalmore dalmore - Tom Warren <twarren@nvidia.com> Active arm armv7:arm720t tegra20 avionic-design medcom-wide medcom-wide - Thierry Reding <thierry.reding@avionic-design.de> diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index cf96333..db47c42 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -75,6 +75,22 @@ # define CONFIG_CMD_SF #endif +/* NOR */ +#ifndef CONFIG_SYS_NO_FLASH +# define CONFIG_SYS_FLASH_BASE 0xE2000000 +# define CONFIG_SYS_FLASH_SIZE (16 * 1024 * 1024) +# define CONFIG_SYS_MAX_FLASH_BANKS 1 +# define CONFIG_SYS_MAX_FLASH_SECT 512 +# define CONFIG_SYS_FLASH_ERASE_TOUT 1000 +# define CONFIG_SYS_FLASH_WRITE_TOUT 5000 +# define CONFIG_FLASH_SHOW_PROGRESS 10 +# define CONFIG_SYS_FLASH_CFI +# undef CONFIG_SYS_FLASH_EMPTY_INFO +# define CONFIG_FLASH_CFI_DRIVER +# undef CONFIG_SYS_FLASH_PROTECTION +# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#endif + /* MMC */ #if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1) # define CONFIG_MMC diff --git a/include/configs/zynq_zc770.h b/include/configs/zynq_zc770.h index 181f9fb..16b9047 100644 --- a/include/configs/zynq_zc770.h +++ b/include/configs/zynq_zc770.h @@ -21,6 +21,10 @@ # define CONFIG_ZYNQ_SDHCI0 # define CONFIG_ZYNQ_SPI +#elif defined(CONFIG_ZC770_XM012) +# define CONFIG_ZYNQ_SERIAL_UART1 +# undef CONFIG_SYS_NO_FLASH + #elif defined(CONFIG_ZC770_XM013) # define CONFIG_ZYNQ_SERIAL_UART0 # define CONFIG_ZYNQ_GEM1 -- 1.8.3 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH v4 19/29] zynq: Add zynq_zc770 xm012 board support 2013-12-21 6:47 ` [U-Boot] [PATCH v4 19/29] zynq: Add zynq_zc770 xm012 board support Jagannadha Sutradharudu Teki @ 2014-01-03 10:12 ` Michal Simek 2014-01-03 11:03 ` Jagan Teki 0 siblings, 1 reply; 5+ messages in thread From: Michal Simek @ 2014-01-03 10:12 UTC (permalink / raw) To: u-boot On 12/21/2013 07:47 AM, Jagannadha Sutradharudu Teki wrote: > ZC770 is a complete development board based on the Xilinx Zynq-7000 > All Programmable SoC, similar to ZC70x board but which has four > different daughter cards, like XM010, XM011, XM012 and XM013 > > ZC770 XM012: > - 1GB DDR3 > - 64MiB Numonyx NOR flash > - USB-UART > > Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> > Cc: Stefan Roese <sr@denx.de> > --- > V4: Removed CONFIG_SYS_NO_FLASH in zynq-common.h > V3: none > V2: none ok. I have looked at this whole series and I think it is step back. We should rather do step forward and start to use device-tree initialization. I have sent some patches for it here http://lists.denx.de/pipermail/u-boot/2014-January/170051.html Thanks, Michal -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 263 bytes Desc: OpenPGP digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140103/a764811f/attachment.pgp> ^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH v4 19/29] zynq: Add zynq_zc770 xm012 board support 2014-01-03 10:12 ` Michal Simek @ 2014-01-03 11:03 ` Jagan Teki 2014-01-03 11:10 ` Michal Simek 0 siblings, 1 reply; 5+ messages in thread From: Jagan Teki @ 2014-01-03 11:03 UTC (permalink / raw) To: u-boot Actually this whole series got approved by Tom, he sent a mail to me directly. Need to ask albert for PL. I think it's should be fine to ask the albert about the series you sent. Any comments? On Fri, Jan 3, 2014 at 3:42 PM, Michal Simek <monstr@monstr.eu> wrote: > On 12/21/2013 07:47 AM, Jagannadha Sutradharudu Teki wrote: >> ZC770 is a complete development board based on the Xilinx Zynq-7000 >> All Programmable SoC, similar to ZC70x board but which has four >> different daughter cards, like XM010, XM011, XM012 and XM013 >> >> ZC770 XM012: >> - 1GB DDR3 >> - 64MiB Numonyx NOR flash >> - USB-UART >> >> Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> >> Cc: Stefan Roese <sr@denx.de> >> --- >> V4: Removed CONFIG_SYS_NO_FLASH in zynq-common.h >> V3: none >> V2: none > > ok. I have looked at this whole series and I think it is step back. > We should rather do step forward and start to use device-tree initialization. > I have sent some patches for it here > http://lists.denx.de/pipermail/u-boot/2014-January/170051.html > > Thanks, > Michal > > -- > Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 > w: www.monstr.eu p: +42-0-721842854 > Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ > Maintainer of Linux kernel - Xilinx Zynq ARM architecture > Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform -- Thanks, Jagan. ^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH v4 19/29] zynq: Add zynq_zc770 xm012 board support 2014-01-03 11:03 ` Jagan Teki @ 2014-01-03 11:10 ` Michal Simek 0 siblings, 0 replies; 5+ messages in thread From: Michal Simek @ 2014-01-03 11:10 UTC (permalink / raw) To: u-boot On 01/03/2014 12:03 PM, Jagan Teki wrote: > Actually this whole series got approved by Tom, he sent a mail to me directly. > Need to ask albert for PL. > > I think it's should be fine to ask the albert about the series you sent. > Any comments? Interesting. But no problem if that series just go to Tom's tree. I have no problem to rebase my changes on the top of it. Thanks, Michal -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 263 bytes Desc: OpenPGP digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140103/89bbe133/attachment.pgp> ^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <1389176616-15709-1-git-send-email-jaganna@xilinx.com>]
* [U-Boot] [PATCH v4 19/29] zynq: Add zynq_zc770 xm012 board support [not found] <1389176616-15709-1-git-send-email-jaganna@xilinx.com> @ 2014-01-08 10:23 ` Jagannadha Sutradharudu Teki 0 siblings, 0 replies; 5+ messages in thread From: Jagannadha Sutradharudu Teki @ 2014-01-08 10:23 UTC (permalink / raw) To: u-boot ZC770 is a complete development board based on the Xilinx Zynq-7000 All Programmable SoC, similar to ZC70x board but which has four different daughter cards, like XM010, XM011, XM012 and XM013 ZC770 XM012: - 1GB DDR3 - 64MiB Numonyx NOR flash - USB-UART Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Cc: Stefan Roese <sr@denx.de> --- boards.cfg | 1 + include/configs/zynq-common.h | 16 ++++++++++++++++ include/configs/zynq_zc770.h | 4 ++++ 3 files changed, 21 insertions(+) diff --git a/boards.cfg b/boards.cfg index 86e4e6e..9ad2601 100644 --- a/boards.cfg +++ b/boards.cfg @@ -358,6 +358,7 @@ Active arm armv7 zynq xilinx zynq zynq_zc70x - Active arm armv7 zynq xilinx zynq zynq_zed - Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Active arm armv7 zynq xilinx zynq zynq_microzed - Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Active arm armv7 zynq xilinx zynq zynq_zc770_xm010 zynq_zc770:ZC770_XM010 Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com> +Active arm armv7 zynq xilinx zynq zynq_zc770_xm012 zynq_zc770:ZC770_XM012 Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Active arm armv7 zynq xilinx zynq zynq_zc770_xm013 zynq_zc770:ZC770_XM013 Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Active arm armv7:arm720t tegra114 nvidia dalmore dalmore - Tom Warren <twarren@nvidia.com> Active arm armv7:arm720t tegra20 avionic-design medcom-wide medcom-wide - Thierry Reding <thierry.reding@avionic-design.de> diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index cf96333..db47c42 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -75,6 +75,22 @@ # define CONFIG_CMD_SF #endif +/* NOR */ +#ifndef CONFIG_SYS_NO_FLASH +# define CONFIG_SYS_FLASH_BASE 0xE2000000 +# define CONFIG_SYS_FLASH_SIZE (16 * 1024 * 1024) +# define CONFIG_SYS_MAX_FLASH_BANKS 1 +# define CONFIG_SYS_MAX_FLASH_SECT 512 +# define CONFIG_SYS_FLASH_ERASE_TOUT 1000 +# define CONFIG_SYS_FLASH_WRITE_TOUT 5000 +# define CONFIG_FLASH_SHOW_PROGRESS 10 +# define CONFIG_SYS_FLASH_CFI +# undef CONFIG_SYS_FLASH_EMPTY_INFO +# define CONFIG_FLASH_CFI_DRIVER +# undef CONFIG_SYS_FLASH_PROTECTION +# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#endif + /* MMC */ #if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1) # define CONFIG_MMC diff --git a/include/configs/zynq_zc770.h b/include/configs/zynq_zc770.h index 181f9fb..16b9047 100644 --- a/include/configs/zynq_zc770.h +++ b/include/configs/zynq_zc770.h @@ -21,6 +21,10 @@ # define CONFIG_ZYNQ_SDHCI0 # define CONFIG_ZYNQ_SPI +#elif defined(CONFIG_ZC770_XM012) +# define CONFIG_ZYNQ_SERIAL_UART1 +# undef CONFIG_SYS_NO_FLASH + #elif defined(CONFIG_ZC770_XM013) # define CONFIG_ZYNQ_SERIAL_UART0 # define CONFIG_ZYNQ_GEM1 -- 1.8.3 ^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-01-08 10:23 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1387608475-1627-1-git-send-email-jaganna@xilinx.com>
2013-12-21 6:47 ` [U-Boot] [PATCH v4 19/29] zynq: Add zynq_zc770 xm012 board support Jagannadha Sutradharudu Teki
2014-01-03 10:12 ` Michal Simek
2014-01-03 11:03 ` Jagan Teki
2014-01-03 11:10 ` Michal Simek
[not found] <1389176616-15709-1-git-send-email-jaganna@xilinx.com>
2014-01-08 10:23 ` Jagannadha Sutradharudu Teki
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.