All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jason Wang <jasowang@redhat.com>
To: Michael Dalton <mwdalton@google.com>,
	"David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org, Eric Dumazet <edumazet@google.com>,
	virtualization@lists.linux-foundation.org,
	"Michael S. Tsirkin" <mst@redhat.com>
Subject: Re: [PATCH net-next v2 3/4] virtio-net: auto-tune mergeable rx buffer size for improved performance
Date: Wed, 08 Jan 2014 14:23:47 +0800	[thread overview]
Message-ID: <52CCEEF3.5070904@redhat.com> (raw)
In-Reply-To: <1389072355-20666-3-git-send-email-mwdalton@google.com>

On 01/07/2014 01:25 PM, Michael Dalton wrote:
> Commit 2613af0ed18a ("virtio_net: migrate mergeable rx buffers to page frag
> allocators") changed the mergeable receive buffer size from PAGE_SIZE to
> MTU-size, introducing a single-stream regression for benchmarks with large
> average packet size. There is no single optimal buffer size for all
> workloads.  For workloads with packet size <= MTU bytes, MTU + virtio-net
> header-sized buffers are preferred as larger buffers reduce the TCP window
> due to SKB truesize. However, single-stream workloads with large average
> packet sizes have higher throughput if larger (e.g., PAGE_SIZE) buffers
> are used.
>
> This commit auto-tunes the mergeable receiver buffer packet size by
> choosing the packet buffer size based on an EWMA of the recent packet
> sizes for the receive queue. Packet buffer sizes range from MTU_SIZE +
> virtio-net header len to PAGE_SIZE. This improves throughput for
> large packet workloads, as any workload with average packet size >=
> PAGE_SIZE will use PAGE_SIZE buffers.
>
> These optimizations interact positively with recent commit
> ba275241030c ("virtio-net: coalesce rx frags when possible during rx"),
> which coalesces adjacent RX SKB fragments in virtio_net. The coalescing
> optimizations benefit buffers of any size.
>
> Benchmarks taken from an average of 5 netperf 30-second TCP_STREAM runs
> between two QEMU VMs on a single physical machine. Each VM has two VCPUs
> with all offloads & vhost enabled. All VMs and vhost threads run in a
> single 4 CPU cgroup cpuset, using cgroups to ensure that other processes
> in the system will not be scheduled on the benchmark CPUs. Trunk includes
> SKB rx frag coalescing.
>
> net-next w/ virtio_net before 2613af0ed18a (PAGE_SIZE bufs): 14642.85Gb/s
> net-next (MTU-size bufs):  13170.01Gb/s
> net-next + auto-tune: 14555.94Gb/s
>
> Jason Wang also reported a throughput increase on mlx4 from 22Gb/s
> using MTU-sized buffers to about 26Gb/s using auto-tuning.
>
> Signed-off-by: Michael Dalton <mwdalton@google.com>
> ---
> v2: Add per-receive queue metadata ring to track precise truesize for
>     mergeable receive buffers. Remove all truesize approximation. Never
>     try to fill a full RX ring (required for metadata ring in v2).
>
>  drivers/net/virtio_net.c | 145 ++++++++++++++++++++++++++++++++++-------------
>  1 file changed, 107 insertions(+), 38 deletions(-)
>
> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> index 526dfd8..f6e1ee0 100644
> --- a/drivers/net/virtio_net.c
> +++ b/drivers/net/virtio_net.c
> @@ -26,6 +26,7 @@
>  #include <linux/if_vlan.h>
>  #include <linux/slab.h>
>  #include <linux/cpu.h>
> +#include <linux/average.h>
>  
>  static int napi_weight = NAPI_POLL_WEIGHT;
>  module_param(napi_weight, int, 0444);
> @@ -36,11 +37,15 @@ module_param(gso, bool, 0444);
>  
>  /* FIXME: MTU in config. */
>  #define GOOD_PACKET_LEN (ETH_HLEN + VLAN_HLEN + ETH_DATA_LEN)
> -#define MERGE_BUFFER_LEN (ALIGN(GOOD_PACKET_LEN + \
> -                                sizeof(struct virtio_net_hdr_mrg_rxbuf), \
> -                                L1_CACHE_BYTES))
>  #define GOOD_COPY_LEN	128
>  
> +/* Weight used for the RX packet size EWMA. The average packet size is used to
> + * determine the packet buffer size when refilling RX rings. As the entire RX
> + * ring may be refilled at once, the weight is chosen so that the EWMA will be
> + * insensitive to short-term, transient changes in packet size.
> + */
> +#define RECEIVE_AVG_WEIGHT 64
> +
>  #define VIRTNET_DRIVER_VERSION "1.0.0"
>  
>  struct virtnet_stats {
> @@ -65,11 +70,30 @@ struct send_queue {
>  	char name[40];
>  };
>  
> +/* Per-packet buffer context for mergeable receive buffers. */
> +struct mergeable_receive_buf_ctx {
> +	/* Packet buffer base address. */
> +	void *buf;
> +
> +	/* Original size of the packet buffer for use in SKB truesize. Does not
> +	 * include any padding space used to avoid internal fragmentation.
> +	 */
> +	unsigned int truesize;
> +};
> +
>  /* Internal representation of a receive virtqueue */
>  struct receive_queue {
>  	/* Virtqueue associated with this receive_queue */
>  	struct virtqueue *vq;
>  
> +	/* Circular buffer of mergeable rxbuf contexts. */
> +	struct mergeable_receive_buf_ctx *mrg_buf_ctx;
> +
> +	/* Number of elements & head index of mrg_buf_ctx. Size must be
> +	 * equal to the associated virtqueue's vring size.
> +	 */
> +	unsigned int mrg_buf_ctx_size, mrg_buf_ctx_head;
> +
>  	struct napi_struct napi;
>  
>  	/* Number of input buffers, and max we've ever had. */
> @@ -78,6 +102,9 @@ struct receive_queue {
>  	/* Chain pages by the private ptr. */
>  	struct page *pages;
>  
> +	/* Average packet length for mergeable receive buffers. */
> +	struct ewma mrg_avg_pkt_len;
> +
>  	/* Page frag for packet buffer allocation. */
>  	struct page_frag alloc_frag;
>  
> @@ -327,32 +354,32 @@ err:
>  
>  static struct sk_buff *receive_mergeable(struct net_device *dev,
>  					 struct receive_queue *rq,
> -					 void *buf,
> +					 struct mergeable_receive_buf_ctx *ctx,
>  					 unsigned int len)
>  {
> -	struct skb_vnet_hdr *hdr = buf;
> +	struct skb_vnet_hdr *hdr = ctx->buf;
>  	int num_buf = hdr->mhdr.num_buffers;
> -	struct page *page = virt_to_head_page(buf);
> -	int offset = buf - page_address(page);
> -	unsigned int truesize = max_t(unsigned int, len, MERGE_BUFFER_LEN);
> +	struct page *page = virt_to_head_page(ctx->buf);
> +	int offset = ctx->buf - page_address(page);
> +	unsigned int truesize = max(len, ctx->truesize);

This looks unnecessary, we've already had precise truesize for this
buffer. ctx->trusize should be always greater or equal to len here.
> +
>  	struct sk_buff *head_skb = page_to_skb(rq, page, offset, len, truesize);
>  	struct sk_buff *curr_skb = head_skb;
>  
>  	if (unlikely(!curr_skb))
>  		goto err_skb;
> -
>  	while (--num_buf) {
>  		int num_skb_frags;
>  
> -		buf = virtqueue_get_buf(rq->vq, &len);
> -		if (unlikely(!buf)) {
> +		ctx = virtqueue_get_buf(rq->vq, &len);
> +		if (unlikely(!ctx)) {
>  			pr_debug("%s: rx error: %d buffers out of %d missing\n",
>  				 dev->name, num_buf, hdr->mhdr.num_buffers);
>  			dev->stats.rx_length_errors++;
>  			goto err_buf;
>  		}
>  
> -		page = virt_to_head_page(buf);
> +		page = virt_to_head_page(ctx->buf);
>  		--rq->num;
>  
>  		num_skb_frags = skb_shinfo(curr_skb)->nr_frags;
> @@ -369,13 +396,13 @@ static struct sk_buff *receive_mergeable(struct net_device *dev,
>  			head_skb->truesize += nskb->truesize;
>  			num_skb_frags = 0;
>  		}
> -		truesize = max_t(unsigned int, len, MERGE_BUFFER_LEN);
> +		truesize = max(len, ctx->truesize);

And this.
>  		if (curr_skb != head_skb) {
>  			head_skb->data_len += len;
>  			head_skb->len += len;
>  			head_skb->truesize += truesize;
>  		}
> -		offset = buf - page_address(page);
> +		offset = ctx->buf - page_address(page);
>  		if (skb_can_coalesce(curr_skb, num_skb_frags, page, offset)) {
>  			put_page(page);
>  			skb_coalesce_rx_frag(curr_skb, num_skb_frags - 1,
> @@ -386,19 +413,20 @@ static struct sk_buff *receive_mergeable(struct net_device *dev,
>  		}
>  	}
>  
> +	ewma_add(&rq->mrg_avg_pkt_len, head_skb->len);
>  	return head_skb;
>  
>  err_skb:
>  	put_page(page);
>  	while (--num_buf) {
> -		buf = virtqueue_get_buf(rq->vq, &len);
> -		if (unlikely(!buf)) {
> +		ctx = virtqueue_get_buf(rq->vq, &len);
> +		if (unlikely(!ctx)) {
>  			pr_debug("%s: rx error: %d buffers missing\n",
>  				 dev->name, num_buf);
>  			dev->stats.rx_length_errors++;
>  			break;
>  		}
> -		page = virt_to_head_page(buf);
> +		page = virt_to_head_page(ctx->buf);
>  		put_page(page);
>  		--rq->num;
>  	}
> @@ -419,12 +447,14 @@ static void receive_buf(struct receive_queue *rq, void *buf, unsigned int len)
>  	if (unlikely(len < sizeof(struct virtio_net_hdr) + ETH_HLEN)) {
>  		pr_debug("%s: short packet %i\n", dev->name, len);
>  		dev->stats.rx_length_errors++;
> -		if (vi->mergeable_rx_bufs)
> -			put_page(virt_to_head_page(buf));
> -		else if (vi->big_packets)
> +		if (vi->mergeable_rx_bufs) {
> +			struct mergeable_receive_buf_ctx *ctx = buf;
> +			put_page(virt_to_head_page(ctx->buf));
> +		} else if (vi->big_packets) {
>  			give_pages(rq, buf);
> -		else
> +		} else {
>  			dev_kfree_skb(buf);
> +		}
>  		return;
>  	}
>  
> @@ -572,29 +602,43 @@ static int add_recvbuf_big(struct receive_queue *rq, gfp_t gfp)
>  
>  static int add_recvbuf_mergeable(struct receive_queue *rq, gfp_t gfp)
>  {
> +	const unsigned int ring_size = rq->mrg_buf_ctx_size;
> +	const size_t hdr_len = sizeof(struct virtio_net_hdr_mrg_rxbuf);
>  	struct page_frag *alloc_frag = &rq->alloc_frag;
> -	char *buf;
> +	struct mergeable_receive_buf_ctx *ctx;
>  	int err;
>  	unsigned int len, hole;
>  
> -	if (unlikely(!skb_page_frag_refill(MERGE_BUFFER_LEN, alloc_frag, gfp)))
> +	len = hdr_len + clamp_t(unsigned int, ewma_read(&rq->mrg_avg_pkt_len),
> +				GOOD_PACKET_LEN, PAGE_SIZE - hdr_len);
> +	len = ALIGN(len, L1_CACHE_BYTES);
> +	if (unlikely(!skb_page_frag_refill(len, alloc_frag, gfp)))
>  		return -ENOMEM;
> -	buf = (char *)page_address(alloc_frag->page) + alloc_frag->offset;
> +
> +	ctx = &rq->mrg_buf_ctx[rq->mrg_buf_ctx_head];
> +	ctx->buf = (char *)page_address(alloc_frag->page) + alloc_frag->offset;
> +	ctx->truesize = len;
>  	get_page(alloc_frag->page);
> -	len = MERGE_BUFFER_LEN;
>  	alloc_frag->offset += len;
>  	hole = alloc_frag->size - alloc_frag->offset;
> -	if (hole < MERGE_BUFFER_LEN) {
> +	if (hole < len) {
> +		/* To avoid internal fragmentation, if there is very likely not
> +		 * enough space for another buffer, add the remaining space to
> +		 * the current buffer. This extra space is not included in
> +		 * ctx->truesize.
> +		 */

What's the reason that this extra space is not accounted for truesize?
>  		len += hole;
>  		alloc_frag->offset += hole;
>  	}
>  
> -	sg_init_one(rq->sg, buf, len);
> -	err = virtqueue_add_inbuf(rq->vq, rq->sg, 1, buf, gfp);
> -	if (err < 0)
> -		put_page(virt_to_head_page(buf));
> -
> -	return err;
> +	sg_init_one(rq->sg, ctx->buf, len);
> +	err = virtqueue_add_inbuf(rq->vq, rq->sg, 1, ctx, gfp);
> +	if (err < 0) {
> +		put_page(virt_to_head_page(ctx->buf));
> +		return err;

Should we also roll back the frag offset added above to avoid leaking frags?
> +	}
> +	rq->mrg_buf_ctx_head = (rq->mrg_buf_ctx_head + 1) & (ring_size - 1);
> +	return 0;
>  }
>  
>  /*
> @@ -610,6 +654,9 @@ static bool try_fill_recv(struct receive_queue *rq, gfp_t gfp)
>  	int err;
>  	bool oom;
>  
> +	/* Do not attempt to add a buffer if the RX ring is full. */
> +	if (unlikely(!rq->vq->num_free))
> +		return true;

I haven't figured out why this is needed. It seems safe for
virtqueue_add_inbuf() just fail in add_recv_xx()?
>  	gfp |= __GFP_COLD;
>  	do {
>  		if (vi->mergeable_rx_bufs)
> @@ -1354,8 +1401,10 @@ static void virtnet_free_queues(struct virtnet_info *vi)
>  {
>  	int i;
>  
> -	for (i = 0; i < vi->max_queue_pairs; i++)
> +	for (i = 0; i < vi->max_queue_pairs; i++) {
>  		netif_napi_del(&vi->rq[i].napi);
> +		kfree(vi->rq[i].mrg_buf_ctx);
> +	}
>  
>  	kfree(vi->rq);
>  	kfree(vi->sq);
> @@ -1394,12 +1443,14 @@ static void free_unused_bufs(struct virtnet_info *vi)
>  		struct virtqueue *vq = vi->rq[i].vq;
>  
>  		while ((buf = virtqueue_detach_unused_buf(vq)) != NULL) {
> -			if (vi->mergeable_rx_bufs)
> -				put_page(virt_to_head_page(buf));
> -			else if (vi->big_packets)
> +			if (vi->mergeable_rx_bufs) {
> +				struct mergeable_receive_buf_ctx *ctx = buf;
> +				put_page(virt_to_head_page(ctx->buf));
> +			} else if (vi->big_packets) {
>  				give_pages(&vi->rq[i], buf);
> -			else
> +			} else {
>  				dev_kfree_skb(buf);
> +			}
>  			--vi->rq[i].num;
>  		}
>  		BUG_ON(vi->rq[i].num != 0);
> @@ -1509,6 +1560,7 @@ static int virtnet_alloc_queues(struct virtnet_info *vi)
>  			       napi_weight);
>  
>  		sg_init_table(vi->rq[i].sg, ARRAY_SIZE(vi->rq[i].sg));
> +		ewma_init(&vi->rq[i].mrg_avg_pkt_len, 1, RECEIVE_AVG_WEIGHT);
>  		sg_init_table(vi->sq[i].sg, ARRAY_SIZE(vi->sq[i].sg));
>  	}
>  
> @@ -1522,7 +1574,8 @@ err_sq:
>  
>  static int init_vqs(struct virtnet_info *vi)
>  {
> -	int ret;
> +	struct virtio_device *vdev = vi->vdev;
> +	int i, ret;
>  
>  	/* Allocate send & receive queues */
>  	ret = virtnet_alloc_queues(vi);
> @@ -1533,12 +1586,28 @@ static int init_vqs(struct virtnet_info *vi)
>  	if (ret)
>  		goto err_free;
>  
> +	if (vi->mergeable_rx_bufs) {
> +		for (i = 0; i < vi->max_queue_pairs; i++) {
> +			struct receive_queue *rq = &vi->rq[i];
> +			rq->mrg_buf_ctx_size = virtqueue_get_vring_size(rq->vq);
> +			rq->mrg_buf_ctx = kmalloc(sizeof(*rq->mrg_buf_ctx) *
> +						  rq->mrg_buf_ctx_size,
> +						  GFP_KERNEL);
> +			if (!rq->mrg_buf_ctx) {
> +				ret = -ENOMEM;
> +				goto err_del_vqs;
> +			}
> +		}
> +	}
> +
>  	get_online_cpus();
>  	virtnet_set_affinity(vi);
>  	put_online_cpus();
>  
>  	return 0;
>  
> +err_del_vqs:
> +	vdev->config->del_vqs(vdev);
>  err_free:
>  	virtnet_free_queues(vi);
>  err:

  reply	other threads:[~2014-01-08  6:23 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-07  5:25 [PATCH net-next v2 1/4] net: allow > 0 order atomic page alloc in skb_page_frag_refill Michael Dalton
2014-01-07  5:25 ` [PATCH net-next v2 2/4] virtio-net: use per-receive queue page frag alloc for mergeable bufs Michael Dalton
2014-01-07  5:25 ` [PATCH net-next v2 3/4] virtio-net: auto-tune mergeable rx buffer size for improved performance Michael Dalton
2014-01-08  6:23   ` Jason Wang [this message]
2014-01-08 18:28     ` Michael Dalton
2014-01-08 18:44       ` Eric Dumazet
2014-01-08 19:16       ` Michael S. Tsirkin
2014-01-08 19:56         ` Michael Dalton
2014-01-08 20:30   ` Michael S. Tsirkin
2014-01-08 20:30   ` Michael S. Tsirkin
2014-01-09  1:42   ` Michael S. Tsirkin
2014-01-09  3:16     ` Michael Dalton
2014-01-09  3:41       ` Michael Dalton
2014-01-09  6:48         ` Michael S. Tsirkin
2014-01-09  8:28           ` Michael Dalton
2014-01-09  9:02             ` Michael Dalton
2014-01-09 13:25             ` Michael S. Tsirkin
2014-01-09 19:33               ` Michael Dalton
2014-01-09  6:42       ` Michael S. Tsirkin
2014-01-07  5:25 ` [PATCH net-next v2 4/4] virtio-net: initial debugfs support, export mergeable rx buffer size Michael Dalton
2014-01-08  6:34   ` Jason Wang
2014-01-08 19:21     ` Michael S. Tsirkin
2014-01-11  5:19       ` Michael Dalton
2014-01-11  5:36         ` Michael Dalton
2014-01-12 17:09         ` Michael S. Tsirkin
2014-01-12 23:32           ` Michael Dalton
2014-01-13  7:36             ` Jason Wang
2014-01-13  9:40             ` Michael S. Tsirkin
2014-01-13 15:38               ` Ben Hutchings
2014-01-13 19:07                 ` Michael Dalton
2014-01-13 19:19                   ` Michael Dalton
2014-01-14 21:45                     ` Michael Dalton
2014-01-14 21:53                       ` Michael S. Tsirkin
2014-01-13 15:38               ` Ben Hutchings
2014-01-08 18:24   ` Michael S. Tsirkin
2014-01-08 18:08 ` [PATCH net-next v2 1/4] net: allow > 0 order atomic page alloc in skb_page_frag_refill Michael S. Tsirkin
2014-01-08 18:26   ` Eric Dumazet
2014-01-08 19:18     ` Michael S. Tsirkin
2014-01-08 19:46       ` Eric Dumazet
2014-01-08 21:54         ` Debabrata Banerjee
2014-01-08 22:01           ` Eric Dumazet
2014-01-08 18:08 ` Michael S. Tsirkin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=52CCEEF3.5070904@redhat.com \
    --to=jasowang@redhat.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=mst@redhat.com \
    --cc=mwdalton@google.com \
    --cc=netdev@vger.kernel.org \
    --cc=virtualization@lists.linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.