All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alex Smith <alex.smith@imgtec.com>
To: Huacai Chen <chenhc@lemote.com>
Cc: Ralf Baechle <ralf@linux-mips.org>,
	John Crispin <john@phrozen.org>,
	"Steven J. Hill" <Steven.Hill@imgtec.com>,
	Aurelien Jarno <aurelien@aurel32.net>,
	<linux-mips@linux-mips.org>, Fuxin Zhang <zhangfx@lemote.com>,
	Zhangjin Wu <wuzhangjin@gmail.com>,
	Hongliang Tao <taohl@lemote.com>, Hua Yan <yanh@lemote.com>
Subject: Re: [PATCH V16 08/12] MIPS: Loongson: Add swiotlb to support big memory (>4GB)
Date: Thu, 9 Jan 2014 12:56:50 +0000	[thread overview]
Message-ID: <52CE9C92.9080400@imgtec.com> (raw)
In-Reply-To: <1389149068-24376-9-git-send-email-chenhc@lemote.com>

On 08/01/14 02:44, Huacai Chen wrote:
> This is probably a workaround because Loongson doesn't support DMA
> address above 4GB. If memory is more than 4GB, CONFIG_SWIOTLB and
> ZONE_DMA32 should be selected. In this way, DMA pages are allocated
> below 4GB preferably.
>
> However, CONFIG_SWIOTLB+ZONE_DMA32 is not enough, so, we provide a
> platform-specific dma_map_ops::set_dma_mask() to make sure each
> driver's dma_mask and coherent_dma_mask is below 32-bit.
>
> Signed-off-by: Huacai Chen <chenhc@lemote.com>
> Signed-off-by: Hongliang Tao <taohl@lemote.com>
> Signed-off-by: Hua Yan <yanh@lemote.com>
> ---
>   arch/mips/include/asm/dma-mapping.h                |    5 +
>   .../mips/include/asm/mach-loongson/dma-coherence.h |   22 +++-
>   arch/mips/loongson/common/Makefile                 |    5 +
>   arch/mips/loongson/common/dma-swiotlb.c            |  165 ++++++++++++++++++++
>   4 files changed, 196 insertions(+), 1 deletions(-)
>   create mode 100644 arch/mips/loongson/common/dma-swiotlb.c
>
> diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
> index 84238c5..06412aa 100644
> --- a/arch/mips/include/asm/dma-mapping.h
> +++ b/arch/mips/include/asm/dma-mapping.h
> @@ -49,9 +49,14 @@ static inline int dma_mapping_error(struct device *dev, u64 mask)
>   static inline int
>   dma_set_mask(struct device *dev, u64 mask)
>   {
> +	struct dma_map_ops *ops = get_dma_ops(dev);
> +
>   	if(!dev->dma_mask || !dma_supported(dev, mask))
>   		return -EIO;
>
> +	if (ops->set_dma_mask)
> +		return ops->set_dma_mask(dev, mask);
> +
>   	*dev->dma_mask = mask;
>
>   	return 0;
> diff --git a/arch/mips/include/asm/mach-loongson/dma-coherence.h b/arch/mips/include/asm/mach-loongson/dma-coherence.h
> index aeb2c05..6a90275 100644
> --- a/arch/mips/include/asm/mach-loongson/dma-coherence.h
> +++ b/arch/mips/include/asm/mach-loongson/dma-coherence.h
> @@ -11,24 +11,40 @@
>   #ifndef __ASM_MACH_LOONGSON_DMA_COHERENCE_H
>   #define __ASM_MACH_LOONGSON_DMA_COHERENCE_H
>
> +#ifdef CONFIG_SWIOTLB
> +#include <linux/swiotlb.h>
> +#endif
> +
>   struct device;
>
> +extern dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr);
> +extern phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr);
>   static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
>   					  size_t size)
>   {
> +#ifdef CONFIG_CPU_LOONGSON3
> +	return virt_to_phys(addr);
> +#else
>   	return virt_to_phys(addr) | 0x80000000;
> +#endif
>   }
>
>   static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
>   					       struct page *page)
>   {
> +#ifdef CONFIG_CPU_LOONGSON3
> +	return page_to_phys(page);
> +#else
>   	return page_to_phys(page) | 0x80000000;
> +#endif
>   }
>
>   static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
>   	dma_addr_t dma_addr)
>   {
> -#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
> +#if defined(CONFIG_CPU_LOONGSON3) && defined(CONFIG_64BIT)
> +	return dma_addr;
> +#elif defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
>   	return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff);
>   #else
>   	return dma_addr & 0x7fffffff;
> @@ -55,7 +71,11 @@ static inline int plat_dma_supported(struct device *dev, u64 mask)
>
>   static inline int plat_device_is_coherent(struct device *dev)
>   {
> +#ifdef CONFIG_DMA_NONCOHERENT
>   	return 0;
> +#else
> +	return 1;
> +#endif /* CONFIG_DMA_NONCOHERENT */
>   }
>
>   #endif /* __ASM_MACH_LOONGSON_DMA_COHERENCE_H */
> diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile
> index 9e4484c..0bb9cc9 100644
> --- a/arch/mips/loongson/common/Makefile
> +++ b/arch/mips/loongson/common/Makefile
> @@ -26,3 +26,8 @@ obj-$(CONFIG_CS5536) += cs5536/
>   #
>
>   obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o
> +
> +#
> +# Big Memory (SWIOTLB) Support
> +#
> +obj-$(CONFIG_SWIOTLB) += dma-swiotlb.o
> diff --git a/arch/mips/loongson/common/dma-swiotlb.c b/arch/mips/loongson/common/dma-swiotlb.c
> new file mode 100644
> index 0000000..9d5451b
> --- /dev/null
> +++ b/arch/mips/loongson/common/dma-swiotlb.c
> @@ -0,0 +1,165 @@
> +#include <linux/mm.h>
> +#include <linux/init.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/scatterlist.h>
> +#include <linux/swiotlb.h>
> +#include <linux/bootmem.h>
> +
> +#include <asm/bootinfo.h>
> +#include <dma-coherence.h>
> +
> +static void *loongson_dma_alloc_coherent(struct device *dev, size_t size,
> +		dma_addr_t *dma_handle, gfp_t gfp, struct dma_attrs *attrs)
> +{
> +	void *ret;
> +
> +	if (dma_alloc_from_coherent(dev, size, dma_handle, &ret))
> +		return ret;
> +
> +	/* ignore region specifiers */
> +	gfp &= ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM);
> +
> +#ifdef CONFIG_ISA
> +	if (dev == NULL)
> +		gfp |= __GFP_DMA;
> +	else
> +#endif
> +#ifdef CONFIG_ZONE_DMA
> +	if (dev->coherent_dma_mask < DMA_BIT_MASK(32))
> +		gfp |= __GFP_DMA;
> +	else
> +#endif
> +#ifdef CONFIG_ZONE_DMA32
> +	 /* Loongson-3 only support DMA in the memory below 4GB now */
> +	if (dev->coherent_dma_mask < DMA_BIT_MASK(40))
> +		gfp |= __GFP_DMA32;
> +	else
> +#endif
> +	;
> +	gfp |= __GFP_NORETRY;
> +
> +	ret = swiotlb_alloc_coherent(dev, size, dma_handle, gfp);
> +	mb();
> +	return ret;
> +}
> +
> +static void loongson_dma_free_coherent(struct device *dev, size_t size,
> +		void *vaddr, dma_addr_t dma_handle, struct dma_attrs *attrs)
> +{
> +	int order = get_order(size);
> +
> +	if (dma_release_from_coherent(dev, order, vaddr))
> +		return;
> +
> +	swiotlb_free_coherent(dev, size, vaddr, dma_handle);
> +}
> +
> +static dma_addr_t loongson_dma_map_page(struct device *dev, struct page *page,
> +				unsigned long offset, size_t size,
> +				enum dma_data_direction dir,
> +				struct dma_attrs *attrs)
> +{
> +	dma_addr_t daddr = swiotlb_map_page(dev, page, offset, size,
> +					dir, attrs);
> +	mb();
> +	return daddr;
> +}
> +
> +static int loongson_dma_map_sg(struct device *dev, struct scatterlist *sg,
> +				int nents, enum dma_data_direction dir,
> +				struct dma_attrs *attrs)
> +{
> +	int r = swiotlb_map_sg_attrs(dev, sg, nents, dir, NULL);
> +	mb();
> +
> +	return r;
> +}
> +
> +static void loongson_dma_sync_single_for_device(struct device *dev,
> +				dma_addr_t dma_handle, size_t size,
> +				enum dma_data_direction dir)
> +{
> +	swiotlb_sync_single_for_device(dev, dma_handle, size, dir);
> +	mb();
> +}
> +
> +static void loongson_dma_sync_sg_for_device(struct device *dev,
> +				struct scatterlist *sg, int nents,
> +				enum dma_data_direction dir)
> +{
> +	swiotlb_sync_sg_for_device(dev, sg, nents, dir);
> +	mb();
> +}
> +
> +static dma_addr_t
> +loongson_unity_phys_to_dma(struct device *dev, phys_addr_t paddr)
> +{
> +	return paddr;
> +}
> +
> +static phys_addr_t
> +loongson_unity_dma_to_phys(struct device *dev, dma_addr_t daddr)
> +{
> +	return daddr;
> +}
> +
> +struct loongson_dma_map_ops {
> +	struct dma_map_ops dma_map_ops;
> +	dma_addr_t (*phys_to_dma)(struct device *dev, phys_addr_t paddr);
> +	phys_addr_t (*dma_to_phys)(struct device *dev, dma_addr_t daddr);
> +};
> +
> +dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
> +{
> +	struct loongson_dma_map_ops *ops = container_of(get_dma_ops(dev),
> +				struct loongson_dma_map_ops, dma_map_ops);
> +
> +	return ops->phys_to_dma(dev, paddr);
> +}
> +
> +phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
> +{
> +	struct loongson_dma_map_ops *ops = container_of(get_dma_ops(dev),
> +				struct loongson_dma_map_ops, dma_map_ops);
> +
> +	return ops->dma_to_phys(dev, daddr);
> +}

This seems a little bit convoluted. Since phys_to_dma and dma_to_phys 
will always end up calling the loongson_unity_ functions, I don't see 
any point in having the loongson_dma_map_ops structure to point to them. 
You can just implement phys_to_dma and dma_to_phys as inlines in 
mach-loongson/dma-coherence.h.

Thanks,
Alex

> +
> +static int loongson_dma_set_mask(struct device *dev, u64 mask)
> +{
> +	/* Loongson doesn't support DMA above 32-bit */
> +	if (mask > DMA_BIT_MASK(32)) {
> +		*dev->dma_mask = DMA_BIT_MASK(32);
> +		return -EIO;
> +	}
> +
> +	*dev->dma_mask = mask;
> +
> +	return 0;
> +}
> +
> +static struct loongson_dma_map_ops loongson_linear_dma_map_ops = {
> +	.dma_map_ops = {
> +		.alloc = loongson_dma_alloc_coherent,
> +		.free = loongson_dma_free_coherent,
> +		.map_page = loongson_dma_map_page,
> +		.unmap_page = swiotlb_unmap_page,
> +		.map_sg = loongson_dma_map_sg,
> +		.unmap_sg = swiotlb_unmap_sg_attrs,
> +		.sync_single_for_cpu = swiotlb_sync_single_for_cpu,
> +		.sync_single_for_device = loongson_dma_sync_single_for_device,
> +		.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
> +		.sync_sg_for_device = loongson_dma_sync_sg_for_device,
> +		.mapping_error = swiotlb_dma_mapping_error,
> +		.dma_supported = swiotlb_dma_supported,
> +		.set_dma_mask = loongson_dma_set_mask
> +	},
> +	.phys_to_dma = loongson_unity_phys_to_dma,
> +	.dma_to_phys = loongson_unity_dma_to_phys
> +};
> +
> +void __init plat_swiotlb_setup(void)
> +{
> +	swiotlb_init(1);
> +	mips_dma_map_ops = &loongson_linear_dma_map_ops.dma_map_ops;
> +}
>

WARNING: multiple messages have this Message-ID (diff)
From: Alex Smith <alex.smith@imgtec.com>
To: Huacai Chen <chenhc@lemote.com>
Cc: Ralf Baechle <ralf@linux-mips.org>,
	John Crispin <john@phrozen.org>,
	"Steven J. Hill" <Steven.Hill@imgtec.com>,
	Aurelien Jarno <aurelien@aurel32.net>,
	linux-mips@linux-mips.org, Fuxin Zhang <zhangfx@lemote.com>,
	Zhangjin Wu <wuzhangjin@gmail.com>,
	Hongliang Tao <taohl@lemote.com>, Hua Yan <yanh@lemote.com>
Subject: Re: [PATCH V16 08/12] MIPS: Loongson: Add swiotlb to support big memory (>4GB)
Date: Thu, 9 Jan 2014 12:56:50 +0000	[thread overview]
Message-ID: <52CE9C92.9080400@imgtec.com> (raw)
Message-ID: <20140109125650.MWFwgOuSH26eOX6g-gyWlIreLTb6qr-YC0iSY5Usxnk@z> (raw)
In-Reply-To: <1389149068-24376-9-git-send-email-chenhc@lemote.com>

On 08/01/14 02:44, Huacai Chen wrote:
> This is probably a workaround because Loongson doesn't support DMA
> address above 4GB. If memory is more than 4GB, CONFIG_SWIOTLB and
> ZONE_DMA32 should be selected. In this way, DMA pages are allocated
> below 4GB preferably.
>
> However, CONFIG_SWIOTLB+ZONE_DMA32 is not enough, so, we provide a
> platform-specific dma_map_ops::set_dma_mask() to make sure each
> driver's dma_mask and coherent_dma_mask is below 32-bit.
>
> Signed-off-by: Huacai Chen <chenhc@lemote.com>
> Signed-off-by: Hongliang Tao <taohl@lemote.com>
> Signed-off-by: Hua Yan <yanh@lemote.com>
> ---
>   arch/mips/include/asm/dma-mapping.h                |    5 +
>   .../mips/include/asm/mach-loongson/dma-coherence.h |   22 +++-
>   arch/mips/loongson/common/Makefile                 |    5 +
>   arch/mips/loongson/common/dma-swiotlb.c            |  165 ++++++++++++++++++++
>   4 files changed, 196 insertions(+), 1 deletions(-)
>   create mode 100644 arch/mips/loongson/common/dma-swiotlb.c
>
> diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
> index 84238c5..06412aa 100644
> --- a/arch/mips/include/asm/dma-mapping.h
> +++ b/arch/mips/include/asm/dma-mapping.h
> @@ -49,9 +49,14 @@ static inline int dma_mapping_error(struct device *dev, u64 mask)
>   static inline int
>   dma_set_mask(struct device *dev, u64 mask)
>   {
> +	struct dma_map_ops *ops = get_dma_ops(dev);
> +
>   	if(!dev->dma_mask || !dma_supported(dev, mask))
>   		return -EIO;
>
> +	if (ops->set_dma_mask)
> +		return ops->set_dma_mask(dev, mask);
> +
>   	*dev->dma_mask = mask;
>
>   	return 0;
> diff --git a/arch/mips/include/asm/mach-loongson/dma-coherence.h b/arch/mips/include/asm/mach-loongson/dma-coherence.h
> index aeb2c05..6a90275 100644
> --- a/arch/mips/include/asm/mach-loongson/dma-coherence.h
> +++ b/arch/mips/include/asm/mach-loongson/dma-coherence.h
> @@ -11,24 +11,40 @@
>   #ifndef __ASM_MACH_LOONGSON_DMA_COHERENCE_H
>   #define __ASM_MACH_LOONGSON_DMA_COHERENCE_H
>
> +#ifdef CONFIG_SWIOTLB
> +#include <linux/swiotlb.h>
> +#endif
> +
>   struct device;
>
> +extern dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr);
> +extern phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr);
>   static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
>   					  size_t size)
>   {
> +#ifdef CONFIG_CPU_LOONGSON3
> +	return virt_to_phys(addr);
> +#else
>   	return virt_to_phys(addr) | 0x80000000;
> +#endif
>   }
>
>   static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
>   					       struct page *page)
>   {
> +#ifdef CONFIG_CPU_LOONGSON3
> +	return page_to_phys(page);
> +#else
>   	return page_to_phys(page) | 0x80000000;
> +#endif
>   }
>
>   static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
>   	dma_addr_t dma_addr)
>   {
> -#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
> +#if defined(CONFIG_CPU_LOONGSON3) && defined(CONFIG_64BIT)
> +	return dma_addr;
> +#elif defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
>   	return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff);
>   #else
>   	return dma_addr & 0x7fffffff;
> @@ -55,7 +71,11 @@ static inline int plat_dma_supported(struct device *dev, u64 mask)
>
>   static inline int plat_device_is_coherent(struct device *dev)
>   {
> +#ifdef CONFIG_DMA_NONCOHERENT
>   	return 0;
> +#else
> +	return 1;
> +#endif /* CONFIG_DMA_NONCOHERENT */
>   }
>
>   #endif /* __ASM_MACH_LOONGSON_DMA_COHERENCE_H */
> diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile
> index 9e4484c..0bb9cc9 100644
> --- a/arch/mips/loongson/common/Makefile
> +++ b/arch/mips/loongson/common/Makefile
> @@ -26,3 +26,8 @@ obj-$(CONFIG_CS5536) += cs5536/
>   #
>
>   obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o
> +
> +#
> +# Big Memory (SWIOTLB) Support
> +#
> +obj-$(CONFIG_SWIOTLB) += dma-swiotlb.o
> diff --git a/arch/mips/loongson/common/dma-swiotlb.c b/arch/mips/loongson/common/dma-swiotlb.c
> new file mode 100644
> index 0000000..9d5451b
> --- /dev/null
> +++ b/arch/mips/loongson/common/dma-swiotlb.c
> @@ -0,0 +1,165 @@
> +#include <linux/mm.h>
> +#include <linux/init.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/scatterlist.h>
> +#include <linux/swiotlb.h>
> +#include <linux/bootmem.h>
> +
> +#include <asm/bootinfo.h>
> +#include <dma-coherence.h>
> +
> +static void *loongson_dma_alloc_coherent(struct device *dev, size_t size,
> +		dma_addr_t *dma_handle, gfp_t gfp, struct dma_attrs *attrs)
> +{
> +	void *ret;
> +
> +	if (dma_alloc_from_coherent(dev, size, dma_handle, &ret))
> +		return ret;
> +
> +	/* ignore region specifiers */
> +	gfp &= ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM);
> +
> +#ifdef CONFIG_ISA
> +	if (dev == NULL)
> +		gfp |= __GFP_DMA;
> +	else
> +#endif
> +#ifdef CONFIG_ZONE_DMA
> +	if (dev->coherent_dma_mask < DMA_BIT_MASK(32))
> +		gfp |= __GFP_DMA;
> +	else
> +#endif
> +#ifdef CONFIG_ZONE_DMA32
> +	 /* Loongson-3 only support DMA in the memory below 4GB now */
> +	if (dev->coherent_dma_mask < DMA_BIT_MASK(40))
> +		gfp |= __GFP_DMA32;
> +	else
> +#endif
> +	;
> +	gfp |= __GFP_NORETRY;
> +
> +	ret = swiotlb_alloc_coherent(dev, size, dma_handle, gfp);
> +	mb();
> +	return ret;
> +}
> +
> +static void loongson_dma_free_coherent(struct device *dev, size_t size,
> +		void *vaddr, dma_addr_t dma_handle, struct dma_attrs *attrs)
> +{
> +	int order = get_order(size);
> +
> +	if (dma_release_from_coherent(dev, order, vaddr))
> +		return;
> +
> +	swiotlb_free_coherent(dev, size, vaddr, dma_handle);
> +}
> +
> +static dma_addr_t loongson_dma_map_page(struct device *dev, struct page *page,
> +				unsigned long offset, size_t size,
> +				enum dma_data_direction dir,
> +				struct dma_attrs *attrs)
> +{
> +	dma_addr_t daddr = swiotlb_map_page(dev, page, offset, size,
> +					dir, attrs);
> +	mb();
> +	return daddr;
> +}
> +
> +static int loongson_dma_map_sg(struct device *dev, struct scatterlist *sg,
> +				int nents, enum dma_data_direction dir,
> +				struct dma_attrs *attrs)
> +{
> +	int r = swiotlb_map_sg_attrs(dev, sg, nents, dir, NULL);
> +	mb();
> +
> +	return r;
> +}
> +
> +static void loongson_dma_sync_single_for_device(struct device *dev,
> +				dma_addr_t dma_handle, size_t size,
> +				enum dma_data_direction dir)
> +{
> +	swiotlb_sync_single_for_device(dev, dma_handle, size, dir);
> +	mb();
> +}
> +
> +static void loongson_dma_sync_sg_for_device(struct device *dev,
> +				struct scatterlist *sg, int nents,
> +				enum dma_data_direction dir)
> +{
> +	swiotlb_sync_sg_for_device(dev, sg, nents, dir);
> +	mb();
> +}
> +
> +static dma_addr_t
> +loongson_unity_phys_to_dma(struct device *dev, phys_addr_t paddr)
> +{
> +	return paddr;
> +}
> +
> +static phys_addr_t
> +loongson_unity_dma_to_phys(struct device *dev, dma_addr_t daddr)
> +{
> +	return daddr;
> +}
> +
> +struct loongson_dma_map_ops {
> +	struct dma_map_ops dma_map_ops;
> +	dma_addr_t (*phys_to_dma)(struct device *dev, phys_addr_t paddr);
> +	phys_addr_t (*dma_to_phys)(struct device *dev, dma_addr_t daddr);
> +};
> +
> +dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
> +{
> +	struct loongson_dma_map_ops *ops = container_of(get_dma_ops(dev),
> +				struct loongson_dma_map_ops, dma_map_ops);
> +
> +	return ops->phys_to_dma(dev, paddr);
> +}
> +
> +phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
> +{
> +	struct loongson_dma_map_ops *ops = container_of(get_dma_ops(dev),
> +				struct loongson_dma_map_ops, dma_map_ops);
> +
> +	return ops->dma_to_phys(dev, daddr);
> +}

This seems a little bit convoluted. Since phys_to_dma and dma_to_phys 
will always end up calling the loongson_unity_ functions, I don't see 
any point in having the loongson_dma_map_ops structure to point to them. 
You can just implement phys_to_dma and dma_to_phys as inlines in 
mach-loongson/dma-coherence.h.

Thanks,
Alex

> +
> +static int loongson_dma_set_mask(struct device *dev, u64 mask)
> +{
> +	/* Loongson doesn't support DMA above 32-bit */
> +	if (mask > DMA_BIT_MASK(32)) {
> +		*dev->dma_mask = DMA_BIT_MASK(32);
> +		return -EIO;
> +	}
> +
> +	*dev->dma_mask = mask;
> +
> +	return 0;
> +}
> +
> +static struct loongson_dma_map_ops loongson_linear_dma_map_ops = {
> +	.dma_map_ops = {
> +		.alloc = loongson_dma_alloc_coherent,
> +		.free = loongson_dma_free_coherent,
> +		.map_page = loongson_dma_map_page,
> +		.unmap_page = swiotlb_unmap_page,
> +		.map_sg = loongson_dma_map_sg,
> +		.unmap_sg = swiotlb_unmap_sg_attrs,
> +		.sync_single_for_cpu = swiotlb_sync_single_for_cpu,
> +		.sync_single_for_device = loongson_dma_sync_single_for_device,
> +		.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
> +		.sync_sg_for_device = loongson_dma_sync_sg_for_device,
> +		.mapping_error = swiotlb_dma_mapping_error,
> +		.dma_supported = swiotlb_dma_supported,
> +		.set_dma_mask = loongson_dma_set_mask
> +	},
> +	.phys_to_dma = loongson_unity_phys_to_dma,
> +	.dma_to_phys = loongson_unity_dma_to_phys
> +};
> +
> +void __init plat_swiotlb_setup(void)
> +{
> +	swiotlb_init(1);
> +	mips_dma_map_ops = &loongson_linear_dma_map_ops.dma_map_ops;
> +}
>

  parent reply	other threads:[~2014-01-09 12:57 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-08  2:44 [PATCH V16 00/12] MIPS: Add Loongson-3 based machines support Huacai Chen
2014-01-08  2:44 ` [PATCH V16 01/12] MIPS: Loongson: Add basic Loongson-3 definition Huacai Chen
2014-01-08 19:58   ` Aurelien Jarno
2014-01-08  2:44 ` [PATCH V16 02/12] MIPS: Loongson: Add basic Loongson-3 CPU support Huacai Chen
2014-01-08 19:58   ` Aurelien Jarno
     [not found]     ` <CAAhV-H4tx=sCk=iUwuCfnCS+rbmtu5Y_UcpAn6JXDoobA+OGrQ@mail.gmail.com>
2014-01-09 21:36       ` Aurelien Jarno
2014-01-12  9:03         ` Huacai Chen
2014-01-12  9:57           ` Aurelien Jarno
2014-01-12 12:10             ` Aaro Koskinen
2014-01-18  1:54               ` John Crispin
2014-01-08  2:44 ` [PATCH V16 03/12] MIPS: Loongson 3: Add Lemote-3A machtypes definition Huacai Chen
2014-01-08 19:58   ` Aurelien Jarno
2014-01-08  2:44 ` [PATCH V16 04/12] MIPS: Loongson: Add UEFI-like firmware interface (LEFI) support Huacai Chen
2014-01-08 22:58   ` Aurelien Jarno
2014-01-09 12:43     ` Alex Smith
2014-01-09 12:43       ` Alex Smith
     [not found]     ` <CAAhV-H64BXsw5CBL-KW1eqXkYcadhHF2NeBH9YmWQz046Lpzzw@mail.gmail.com>
2014-01-09 21:37       ` Aurelien Jarno
2014-01-09 12:37   ` Alex Smith
2014-01-09 12:37     ` Alex Smith
2014-01-08  2:44 ` [PATCH V16 05/12] MIPS: Loongson 3: Add HT-linked PCI support Huacai Chen
2014-01-08 22:58   ` Aurelien Jarno
     [not found]     ` <CAAhV-H57tDmYByjVwhf3teFZkGowR4E9+OO1vO0kP3iAKTNJVw@mail.gmail.com>
2014-01-09 21:38       ` Aurelien Jarno
2014-01-08  2:44 ` [PATCH V16 06/12] MIPS: Loongson 3: Add IRQ init and dispatch support Huacai Chen
2014-01-08 22:58   ` Aurelien Jarno
2014-01-09 12:52   ` Alex Smith
2014-01-09 12:52     ` Alex Smith
2014-01-08  2:44 ` [PATCH V16 07/12] MIPS: Loongson 3: Add serial port support Huacai Chen
2014-01-08 22:58   ` Aurelien Jarno
2014-01-08  2:44 ` [PATCH V16 08/12] MIPS: Loongson: Add swiotlb to support big memory (>4GB) Huacai Chen
2014-01-08 22:58   ` Aurelien Jarno
     [not found]     ` <CAAhV-H4h43N2OR4znwVv3miVbGkWJLapdgr9Jou1j4R8-9TRyA@mail.gmail.com>
2014-01-09 22:08       ` Aurelien Jarno
     [not found]         ` <CAAhV-H7WFdt-4jYG5qPV36UWJQnSfkSa2J-3CAs2+QLqwHVhuA@mail.gmail.com>
2014-01-11 15:24           ` Aurelien Jarno
2014-01-09 12:56   ` Alex Smith [this message]
2014-01-09 12:56     ` Alex Smith
     [not found]     ` <CAAhV-H7ZO0gNzQ5wQ-yD=NiP2AJrc3-bWLXHo-HDngf27c9+gQ@mail.gmail.com>
2014-01-11 15:25       ` Aurelien Jarno
2014-01-12  9:12         ` Huacai Chen
2014-01-12  9:57           ` Aurelien Jarno
2014-01-08  2:44 ` [PATCH V16 09/12] MIPS: Loongson: Add Loongson-3 Kconfig options Huacai Chen
2014-01-09 13:07   ` Alex Smith
2014-01-09 13:07     ` Alex Smith
2014-01-11 15:24     ` Aurelien Jarno
2014-01-13  3:02       ` Huacai Chen
2014-01-13  4:30         ` Aurelien Jarno
2014-01-13 10:15           ` Huacai Chen
2014-01-13 10:38             ` Aurelien Jarno
2014-01-13 12:15               ` Huacai Chen
2014-01-08  2:44 ` [PATCH V16 10/12] MIPS: Loongson 3: Add Loongson-3 SMP support Huacai Chen
2014-01-09 13:19   ` Alex Smith
2014-01-09 13:19     ` Alex Smith
2014-01-08  2:44 ` [PATCH V16 11/12] MIPS: Loongson 3: Add CPU hotplug support Huacai Chen
2014-01-11 15:24   ` Aurelien Jarno
2014-01-08  2:44 ` [PATCH V16 12/12] MIPS: Loongson: Add a Loongson-3 default config file Huacai Chen
2014-01-08  7:26 ` [PATCH V16 00/12] MIPS: Add Loongson-3 based machines support John Crispin
2014-01-18  9:38 ` Andreas Barth
     [not found]   ` <0466fa9d60b91233d2157d5ce0b51333.squirrel@mail.lemote.com>
2014-02-06 23:27     ` Andreas Barth

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=52CE9C92.9080400@imgtec.com \
    --to=alex.smith@imgtec.com \
    --cc=Steven.Hill@imgtec.com \
    --cc=aurelien@aurel32.net \
    --cc=chenhc@lemote.com \
    --cc=john@phrozen.org \
    --cc=linux-mips@linux-mips.org \
    --cc=ralf@linux-mips.org \
    --cc=taohl@lemote.com \
    --cc=wuzhangjin@gmail.com \
    --cc=yanh@lemote.com \
    --cc=zhangfx@lemote.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.