Re: [PATCH 00/18] ARM: dts: Better support for Gumstix Overo

[Benoit Cousson <bcousson@baylibre.com>]

Hi Florian,

On 09/01/2014 17:47, Florian Vaussard wrote:
> Hello,
>
> This series adds a number of improvements to Gumstix Overo.

Thanks for that nice series.

> Patch 1+2: fix an issue with the vendor prefix (reported long ago by Javier Martinez Canillas)
> Patch 3+4: add some missing pinctrl entries
> Patch 5: completely turn off the PMIC on power off
> Patch 6: enable the on-board Wifi
> Patch 7: add the high-speed USB PHY
> Patch 8: add specific timings for LAN9221 into a generic file
> -> This might interest other people using the same chip, result in doubled bandwith
>
> Patch 9: simplify omap3-tobi by using patch 8
> Patch 10: add support for AT24C01 EEPROM used on expansion boards
> Patch 11: factorize parts common to all expansion boards
> Patch 12: rename omap3-tobi to omap3-overo-tobi
> -> I do not know to which extent this might qualify as an API breakage,
>     but the new name is far better IMHO
>
> Patch 13 to 17: add new extension boards (Palo43, Gallop43, Alto35, Chestnut43, Summit)
> Patch 18: add the HDMI output
> -> this patch depends on Tomi Valkeinen's DT binding for OMAPDSS, which is
>     not yet merged, so this patch will have to wait
>
>
> The patches 13 to 17 are based on the hardware schematics and compile-tested, as I
> do not have the necessary hardware (anyone willing to send me some boards ? :-)
> We are mainly missing the support for the various LCDs, the accelerometer + probably
> other small things.
>
> This series is based on Tony's omap-for-v3.14/dt branch + work from Tomi [1] for the patch 18.
>
> Benoit: I guess that I am too late for the 3.14... ?

Yeah, I think so, even my 3.14 branch is too late for 3.14 :-)

Thanks,
Benoit

>
> Regards,
>
> Florian
>
>
> Florian Vaussard (18):
>    of: add vendor prefix for Gumstix
>    ARM: dts: omap3-tobi: Use the correct vendor prefix
>    ARM: dts: omap3-tobi: Add missing pinctrl
>    ARM: dts: omap3-overo: Add missing pinctrl
>    ARM: dts: omap3-overo: Use complete poweroff
>    ARM: dts: omap3-overo: Enable MMC2
>    ARM: dts: omap3-overo: Add HSUSB PHY
>    ARM: dts: omap: Add common file for SMSC9221
>    ARM: dts: omap3-tobi: Use include file omap-gpmc-smsc9221
>    ARM: dts: omap3-tobi: Add AT24C01 EEPROM
>    ARM: dts: omap3-tobi: Create a file for common Gumstix peripherals
>    ARM: dts: omap3-tobi: Rename to omap3-overo-tobi
>    ARM: dts: Add support for the Overo Palo43
>    ARM: dts: Add support for the Overo Gallop43
>    ARM: dts: Add support for the Overo Alto35
>    ARM: dts: Add support for the Overo Chestnut43
>    ARM: dts: Add support for the Overo Summit
>    ARM: dts: overo: Add support for DVI output
>
>   .../devicetree/bindings/vendor-prefixes.txt        |   1 +
>   arch/arm/boot/dts/Makefile                         |   7 +-
>   arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi          |  58 ++++++++++
>   arch/arm/boot/dts/omap3-overo-alto35.dts           |  52 +++++++++
>   arch/arm/boot/dts/omap3-overo-chestnut43.dts       |  76 +++++++++++++
>   arch/arm/boot/dts/omap3-overo-common-dvi.dtsi      | 108 ++++++++++++++++++
>   arch/arm/boot/dts/omap3-overo-common.dtsi          |  39 +++++++
>   arch/arm/boot/dts/omap3-overo-gallop43.dts         |  51 +++++++++
>   arch/arm/boot/dts/omap3-overo-palo43.dts           |  52 +++++++++
>   arch/arm/boot/dts/omap3-overo-summit.dts           |  30 +++++
>   .../dts/{omap3-tobi.dts => omap3-overo-tobi.dts}   |  41 +------
>   arch/arm/boot/dts/omap3-overo.dtsi                 | 122 +++++++++++++++++++--
>   12 files changed, 594 insertions(+), 43 deletions(-)
>   create mode 100644 arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
>   create mode 100644 arch/arm/boot/dts/omap3-overo-alto35.dts
>   create mode 100644 arch/arm/boot/dts/omap3-overo-chestnut43.dts
>   create mode 100644 arch/arm/boot/dts/omap3-overo-common-dvi.dtsi
>   create mode 100644 arch/arm/boot/dts/omap3-overo-common.dtsi
>   create mode 100644 arch/arm/boot/dts/omap3-overo-gallop43.dts
>   create mode 100644 arch/arm/boot/dts/omap3-overo-palo43.dts
>   create mode 100644 arch/arm/boot/dts/omap3-overo-summit.dts
>   rename arch/arm/boot/dts/{omap3-tobi.dts => omap3-overo-tobi.dts} (54%)
>


-- 
Benoît Cousson
BayLibre
Embedded Linux Technology Lab
www.baylibre.com
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html