[PATCH v2 1/5] ASoC: pcm: Properly initialize hw->rate_max

[PATCH v2 1/5] ASoC: pcm: Properly initialize hw->rate_max

[Lars-Peter Clausen]

If none of the components (CODEC or CPU DAI) sets a maximum sample rate we'll
end up with the rate_max field of the runtime hardware set to 0.  (Note that it
is still possible for the components to constrain the supported sample rates
using other methods, e.g. setting a list constraint) If rate_max is 0 this means
that the sound card doesn't support any rates at all, which is not the desired
result. So initialize rate_max to UINT_MAX. For symmetry reasons also set
rate_min to 0.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
No changes in v2
---
 sound/soc/soc-pcm.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
index 313adba..b6e0c32 100644
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -252,6 +252,9 @@ static void soc_pcm_init_runtime_hw(struct snd_pcm_runtime *runtime,
 		& (SNDRV_PCM_RATE_KNOT | SNDRV_PCM_RATE_CONTINUOUS))
 		hw->rates |= codec_stream->rates;
 
+	hw->rate_min = 0;
+	hw->rate_max = UINT_MAX;
+
 	snd_pcm_limit_hw_rates(runtime);
 
 	hw->rate_min = max(hw->rate_min, cpu_stream->rate_min);
-- 
1.8.0

[PATCH v2 2/5] ASoC: fsl: Don't mix SNDRV_PCM_RATE_CONTINUOUS with specific rates

[Lars-Peter Clausen]

SNDRV_PCM_RATE_CONTINUOUS means that all rates (possibly limited to a certain
interval) are supported. There is no need to manually set other rate bits.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
No changes in v2
---
 sound/soc/fsl/fsl_ssi.c         | 3 +--
 sound/soc/fsl/mpc5200_psc_i2s.c | 3 +--
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 7864ec5..f9090b1 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -81,8 +81,7 @@ static inline void write_ssi_mask(u32 __iomem *addr, u32 clear, u32 set)
  * ALSA that we support all rates and let the codec driver decide what rates
  * are really supported.
  */
-#define FSLSSI_I2S_RATES (SNDRV_PCM_RATE_5512 | SNDRV_PCM_RATE_8000_192000 | \
-			  SNDRV_PCM_RATE_CONTINUOUS)
+#define FSLSSI_I2S_RATES SNDRV_PCM_RATE_CONTINUOUS
 
 /**
  * FSLSSI_I2S_FORMATS: audio formats supported by the SSI
diff --git a/sound/soc/fsl/mpc5200_psc_i2s.c b/sound/soc/fsl/mpc5200_psc_i2s.c
index f4efaad..5d07e8a 100644
--- a/sound/soc/fsl/mpc5200_psc_i2s.c
+++ b/sound/soc/fsl/mpc5200_psc_i2s.c
@@ -26,8 +26,7 @@
  * ALSA that we support all rates and let the codec driver decide what rates
  * are really supported.
  */
-#define PSC_I2S_RATES (SNDRV_PCM_RATE_5512 | SNDRV_PCM_RATE_8000_192000 | \
-			SNDRV_PCM_RATE_CONTINUOUS)
+#define PSC_I2S_RATES SNDRV_PCM_RATE_CONTINUOUS
 
 /**
  * PSC_I2S_FORMATS: audio formats supported by the PSC I2S mode
-- 
1.8.0

[PATCH v2 3/5] ASoC: s6000: Don't mix SNDRV_PCM_RATE_CONTINUOUS with specific rates

[Lars-Peter Clausen]

SNDRV_PCM_RATE_CONTINUOUS means that all rates (possibly limited to a certain
interval) are supported. There is no need to manually set other rate bits.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Acked-by: Daniel Glöckner <daniel-gl@gmx.net>
---
No changes in v2
---
 sound/soc/s6000/s6000-i2s.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/sound/soc/s6000/s6000-i2s.c b/sound/soc/s6000/s6000-i2s.c
index 73bb99f..7eba797 100644
--- a/sound/soc/s6000/s6000-i2s.c
+++ b/sound/soc/s6000/s6000-i2s.c
@@ -405,8 +405,7 @@ static int s6000_i2s_dai_probe(struct snd_soc_dai *dai)
 	return 0;
 }
 
-#define S6000_I2S_RATES	(SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_5512 | \
-			 SNDRV_PCM_RATE_8000_192000)
+#define S6000_I2S_RATES SNDRV_PCM_RATE_CONTINUOUS
 #define S6000_I2S_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE)
 
 static const struct snd_soc_dai_ops s6000_i2s_dai_ops = {
-- 
1.8.0

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[PATCH v2 4/5] ALSA: Add helper function for intersecting two rate masks

[Lars-Peter Clausen]

A bit of special care is necessary when creating the intersection of two rate
masks. This comes from the special meaning of the SNDRV_PCM_RATE_CONTINUOUS and
SNDRV_PCM_RATE_KNOT bits, which needs special handling when intersecting two
rate masks. SNDRV_PCM_RATE_CONTINUOUS means the hardware supports all rates in a
specific interval. SNDRV_PCM_RATE_KNOT means the hardware supports a set of
discrete rates specified by a list constraint. For all other cases the supported
rates are specified directly in the rate mask.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
---
Changes since v1:
	* Use EXPORT_SYMBOL_GPL instead of EXPORT_SYMBOL
---
 include/sound/pcm.h   |  2 ++
 sound/core/pcm_misc.c | 39 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 41 insertions(+)

diff --git a/include/sound/pcm.h b/include/sound/pcm.h
index 84b10f9..d017091 100644
--- a/include/sound/pcm.h
+++ b/include/sound/pcm.h
@@ -901,6 +901,8 @@ extern const struct snd_pcm_hw_constraint_list snd_pcm_known_rates;
 int snd_pcm_limit_hw_rates(struct snd_pcm_runtime *runtime);
 unsigned int snd_pcm_rate_to_rate_bit(unsigned int rate);
 unsigned int snd_pcm_rate_bit_to_rate(unsigned int rate_bit);
+unsigned int snd_pcm_rate_mask_intersect(unsigned int rates_a,
+					 unsigned int rates_b);
 
 static inline void snd_pcm_set_runtime_buffer(struct snd_pcm_substream *substream,
 					      struct snd_dma_buffer *bufp)
diff --git a/sound/core/pcm_misc.c b/sound/core/pcm_misc.c
index 43f24cc..4560ca0 100644
--- a/sound/core/pcm_misc.c
+++ b/sound/core/pcm_misc.c
@@ -514,3 +514,42 @@ unsigned int snd_pcm_rate_bit_to_rate(unsigned int rate_bit)
 	return 0;
 }
 EXPORT_SYMBOL(snd_pcm_rate_bit_to_rate);
+
+static unsigned int snd_pcm_rate_mask_sanitize(unsigned int rates)
+{
+	if (rates & SNDRV_PCM_RATE_CONTINUOUS)
+		return SNDRV_PCM_RATE_CONTINUOUS;
+	else if (rates & SNDRV_PCM_RATE_KNOT)
+		return SNDRV_PCM_RATE_KNOT;
+	return rates;
+}
+
+/**
+ * snd_pcm_rate_mask_intersect - computes the intersection between two rate masks
+ * @rates_a: The first rate mask
+ * @rates_b: The second rate mask
+ *
+ * This function computes the rates that are supported by both rate masks passed
+ * to the function. It will take care of the special handling of
+ * SNDRV_PCM_RATE_CONTINUOUS and SNDRV_PCM_RATE_KNOT.
+ *
+ * Return: A rate mask containing the rates that are supported by both rates_a
+ * and rates_b.
+ */
+unsigned int snd_pcm_rate_mask_intersect(unsigned int rates_a,
+	unsigned int rates_b)
+{
+	rates_a = snd_pcm_rate_mask_sanitize(rates_a);
+	rates_b = snd_pcm_rate_mask_sanitize(rates_b);
+
+	if (rates_a & SNDRV_PCM_RATE_CONTINUOUS)
+		return rates_b;
+	else if (rates_b & SNDRV_PCM_RATE_CONTINUOUS)
+		return rates_a;
+	else if (rates_a & SNDRV_PCM_RATE_KNOT)
+		return rates_b;
+	else if (rates_b & SNDRV_PCM_RATE_KNOT)
+		return rates_a;
+	return rates_a & rates_b;
+}
+EXPORT_SYMBOL_GPL(snd_pcm_rate_mask_intersect);
-- 
1.8.0

[PATCH v2 5/5] ASoC: pcm: Use snd_pcm_rate_mask_intersect() helper

[Lars-Peter Clausen]

Instead of open-coding the intersecting of two rate masks (and getting slightly
wrong for some of the corner cases) use the new snd_pcm_rate_mask_intersect()
helper function.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
No changes in v2
---
 sound/soc/soc-pcm.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
index b6e0c32..5932971 100644
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -244,13 +244,8 @@ static void soc_pcm_init_runtime_hw(struct snd_pcm_runtime *runtime,
 		hw->formats &= codec_stream->formats & cpu_stream->formats;
 	else
 		hw->formats = codec_stream->formats & cpu_stream->formats;
-	hw->rates = codec_stream->rates & cpu_stream->rates;
-	if (codec_stream->rates
-		& (SNDRV_PCM_RATE_KNOT | SNDRV_PCM_RATE_CONTINUOUS))
-		hw->rates |= cpu_stream->rates;
-	if (cpu_stream->rates
-		& (SNDRV_PCM_RATE_KNOT | SNDRV_PCM_RATE_CONTINUOUS))
-		hw->rates |= codec_stream->rates;
+	hw->rates = snd_pcm_rate_mask_intersect(codec_stream->rates,
+		cpu_stream->rates);
 
 	hw->rate_min = 0;
 	hw->rate_max = UINT_MAX;
-- 
1.8.0

Re: [PATCH v2 3/5] ASoC: s6000: Don't mix SNDRV_PCM_RATE_CONTINUOUS with specific rates

[Lars-Peter Clausen]

On 01/11/2014 10:24 AM, Lars-Peter Clausen wrote:
> SNDRV_PCM_RATE_CONTINUOUS means that all rates (possibly limited to a certain
> interval) are supported. There is no need to manually set other rate bits.
> 
> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
> Cc: Acked-by: Daniel Glöckner <daniel-gl@gmx.net>

Uhm, sorry, the "Acked-by:" should have not been there.

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: [PATCH v2 3/5] ASoC: s6000: Don't mix SNDRV_PCM_RATE_CONTINUOUS with specific rates

[Daniel Glöckner]

On Sat, Jan 11, 2014 at 10:29:26AM +0100, Lars-Peter Clausen wrote:
> On 01/11/2014 10:24 AM, Lars-Peter Clausen wrote:
> > Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
> > Cc: Acked-by: Daniel Glöckner <daniel-gl@gmx.net>
> 
> Uhm, sorry, the "Acked-by:" should have not been there.

Acked-by: Daniel Glöckner <daniel-gl@gmx.net>
provided 4/5 and 5/5 get applied first

Re: [PATCH v2 1/5] ASoC: pcm: Properly initialize hw->rate_max

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 252 bytes --]

On Sat, Jan 11, 2014 at 10:24:40AM +0100, Lars-Peter Clausen wrote:
> If none of the components (CODEC or CPU DAI) sets a maximum sample rate we'll
> end up with the rate_max field of the runtime hardware set to 0.  (Note that it

Applied all, thanks.

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]